During the rotation of an image, it disappears.

Similar Questions

• After you disable the built-in webcam, imaging devices disappeared from the Device Manager. How can I make it reappear if I can activate my webcam?

  Hello

  After you disable the webcam integrated my laptop ASUS N80V, imaging devices disappeared from the Device Manager.  I use Windows Vista x 64.  How can I make it reappear if I can activate my webcam?
  Thank you
  Chris

  First try a system restore to a date that precedes you disabled the camera, it could allow the camera back.
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  What is system restore?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Try reinstalling the camera driver. On my previous Asus link there is a click to download on that link. You must communicate your model number or click on 'Auto-Detection model '.

  There is also a forum on the Asus Support link, you can try to ask your questions here.

  You can also try the update of the BIOS available on the download link and then check if the unit is on.
  BIOS update guide for ASUS laptops
  http://Forum.NotebookReview.com/ASUS/174395-BIOS-update-Guide-ASUS-Notebooks.html

  Take note of the setting warn in red text.

• My Satellite phone stops during the restore recovery disc image

  On several occasions the laptop suddenly stops until he's finished completely restore the recovery disc.
  I have a suspicion that this may be due to get warm. If so, is there anything that might be too sensitive to heat and therefore tripping? It becomes a little hot but not more than my other laptop which is not traveling. It seems to work longer before stumbling in a cold room.

  I have not been able to fully restore the image without problem and had to do the installation with a XP disc. This succeeded, but again, it fires after a short use.
  Something should be reset or the laptop should it take repair?

  Hello

  According to the description of your problem, the first step should be professionally cleaned. Dust blocks the flow of air and I imagine that shortly after, the critical temperature of portable erached. In this case the unit will stop automatically because of protection of the equipment.

  The device, I'm sure everything will be OK again.

• Bug in the timer (small app). Reset during the rotation of the screen of the phone.

  I discovered that if you use the small standard timer app and do you rotate the phone (from portrait to landscape or vice versa) the app resets istantly. This happens even if minimize you it. Before I discovered, I thought several times, I was going crazy to forget each time put the timer.

  Please fix it I use it often while cooking!

  I have an E6883 Z5 double Premium

  It has been reported before

  http://talk.sonymobile.com/T5/Xperia-Z3/small-app-timer-not-working-on-Z3/TD-p/1036704/highlight/Tru...

• Windows 7 backup disk Passport system - fails during the create a System Image

  error msg "the system cannot find the file specified" error code 0 x 80070002. Search code MS to remove update files - did not work. Close the anti-virus software, autoplay, etc... no luck. Backups on a WD "My Passport" are not after all MS updates beyond Windows 7 SP1. More info on Dell XPS 8500 is i5-3450 system and create the system image ends approximately 63% before failing. I also removed the Dell backup software after 5 unsuccessful attempts, still no progress.

  Hello Marilyn, Abd el Krim and everything,

  Here are my system specs, then I'll tell you what I found. I work with Dell XPS8500 Intel Core i5-3450 processor 3.1 GHz, 8 GB DDR3, 1 TB SATA HDD Windows 7 Home Premium 64 Bit memory. The system uses Intel 7 / C216 Chipset for Intel USB 3.0 eXtensible Host Controller and USB enhanced host controller.

  THE system BIOS is A06 and I updated the Intel eXtensible drivers to 1.0.5.235 as of 05/21/12.

  The system was manufactured 17/08/2012.

  My backup disk is Western Digital MyPassport external Drive USB 3.0 500 GB.

  I use Windows Back Up & Recovery routine not 3rd party software.

  I'm not not execution of recommendations of Abd el Krim when I found users of the Forum having the same problem as me.

  Using the ports USB 3.0 on the Dell gives Back Up is not "the system cannot find the file specified" error Code 0 x 80070002. After which, the AutoPlay routine appears. 57% using Dell before USB 3.0 ports annoys me all before the failure and the back gets USB 3.0 ports me 63% & 53% complete before the failure. Other Dell users encounter similar and different problems with the Intel / Dell USB 3.0 implementation (Ivy Bridge?).

  When I make Windows 7 to the top using the USB 2.0 ports, it completes successfully. WaHoo finally...

  So now, I believe that the problem is not with Windows 7 but the drivers Intel or Dell USB 3.0 application

  Thanks for your support! I look forward to responses, comments and other suggestions.

• During the rotation of captive text, why the text baselines evolve?

  In Illustrator CC, I have a group composed of several elements, including the text in the box. I flip this group 5 degrees using the transformation Panel (this seems to be a problem, either in a group or separate).

  As a result, the basic lines of text are more aligned. Take a look at the screenshot below. You will see the poor step in the 'e' to 'brand' (lines based on the n and d are above the "Bra"), and "pushed" where "n" is obviously higher than the rest of the word, and the 'a' aollaboration down below the rest, and many other words.

  If I unrotate it and then re-turns, different letters have basic problems. If I choose a different font, the same question. All the character settings are default. All paragraph settings are default. Area type options are two columns

  Am I missing something? Is there a better approach for this?

  

  caseyls,

  I think that maybe it's a strangeness of artifact/rendering screen.

  You see exactly the same zoom levels?

  It comes also with images PDF/print/exported/saved?

• How to upgrade all THE records during the insertion of new image

  I have categories and subcategories and they contain images. The images are in db with an order number, the lowest number is shown first on the Web site

  When I insert images (I have a multiple image uploader) all order numbers require updating. When I insert images of example 4, these 4 images stopped 1,2,3,4 and the order of the images already in the db (for this category) need to become the current order number + 4 and I don't know how to do this.

  Anyone who can point me in the right direction?

  Bianca

  I propose a different approach.

  If you stamp your db files, use this field to determine the order.  However, a simple query updated work.

  Update yourtable

  game field = field + 4

• During the day agenda appointment disappeared

  A few weeks ago, I bought a Centro by Verizon. I had a Palm Z 22 before that. When I loaded the Palm software for the Centro, a bunch of my appointments during the day for any offbeat 22 Z exactly one hour later on the desktop, then transferred it to my Centro. Now, tonight, I see that all appointments before 17:30 for every day during the day disappeared. Each appointment during the day on my desk calendar disappeared. My Centro them still has on it, but I'm afraid what I hotsync, them, the Centro will be think that they were all deleted on purpose and do the same thing.

  What should I do to recover my desktop calendar and what the hell happened to do only during the day go away?

  It is a little more troubling. I have never had any trouble with the software of my Palm in eight years.

  Thank you

  Hello

  first of all, check the palm desktop user name

  If the user name on the Palm Desktop is the same as on the centro ANS still there is no data
  You can set the hotsync Manager to "handheld replaces the Office" on the calendar

  Message relates to: Palm TX

• Some of my photos have disappeared during the transition to a new iphone, where can I find them, how?

  Some of my photos have disappeared during the transition to a new iphone, where can I find them, how?

  AlbiinaB wrote:

  Some of my photos have disappeared during the transition to a new iphone, where can I find them, how?

  Transfer the contents of an iPhone, iPad or iPod touch to a new device - Apple Support

• HP T610 more: HPDM deployment for t610 image more crashes during the installation of the new initial start of the image

  We are working on the update of our thin clients HP T610 more.  Update us the thin clients in the last image of the OS WES7P and also update to IE11 and Citrix receiver 4.4.

  We use HPDM 4.6.4

  We have successfully several T610s and update the image of the OS and related software with no problems.  We are then able to use the 4.6.4 to successfully shoot HPDM and image of these thin clients updated in the master repository.

  We then create a task to deploy the new image to several thin clients.  We configure the task to use the imagery being cached, and then run the task.  HPDM then successfully deploys the image for thin clients.

  Customers accept the image cache and once the image is fully downloaded they restart to deploy the image.   After the restart, the image unfolds and decompresses correctly, then the thin client, start the original installation of Windows.

  But for 90% or more of these newly imaged thin clients that they get hung up during the installation of Windows (usually during the message that windows is written to the Registry).  Once the thin clients get hung at this stage they are inaccessible and unrecoverable by HPDM and must be copied via USB.

  We believe that the issue is somehow related monitors are connected to thin clients.  If isolate us completely thin clients monitors, then deploy an image the new image is OK.  HPDM reports that the image has been deployed successfully.  If we then go back to thin clients and reconnect the monitors of the thin client is updated and the screen seems to be in standard vga mode low resolution.  A restart of the thin client then recognizes and sets the appropriate screen resolution, and the thin client is good to go.

  What is normal sound monitors must be separated to deploy a new image?

  Thanks for any idea or thougts.

  From the point of view HPDM, disconnect monitor is not required when you deploy the image. Personal thought is that there is a compatibility problem between the display driver, graphics card and the system. Installing Windows intend to write a default registry value based on connected monitor (maybe display settings), for some reason, he was stuck. I'm not the driver or the operating system that you are an expert, I would say that you submit a ticket to HP for additional troubleshooting.

• Problem - edges of digital triggering slows down during the fast rotations

  Hi all. I have problem to understand. I want to measure the pressure with two strain gages on 90 degrees (NI 9237 half bridge II) and I engine with metal plate on it with 52 teeth (gear) to measure on each tooth of the strain. For the rotation, I use NI 9401 digital input.

  I need for example 1000 samples from the first digital edge to the second. (on the metal plate). I try to start trigger. In slow speed (turn around with the hand) of the metal plate, everything is OK. But if I turn around the metal plate digital fast triggers edges slows down. During a cycle on the metal plate on the cost of slow speed me 52 digital edges 1000 sampels by edge (metal plate is with 52 teeth), but rely on fast speed on me 25 edges. This problem is sync of the digital inputs and the analog inputs. I made the example with DAqmx Vi express. I've implemented on digital imput and then count me in each tooth regardless of speed and everything is OK, but when I buid trigger of strain on the edges of quick release rotation speed slows down.

  Can someone help me with this?

  Thanks before.

  So you're collecting samples from 1000 to 10000 samples per second. Which takes 100 Ms. If your triggering edges occur more quickly than the interval of 100 ms, some of them will be missed.  If you run faster than a cycle all 5.2 seconds your gear plate with 52 teeth, some triggers will be produced before the end of the previous data collection.

  What is the fastest speed that you will not sping palte metal?

  Lynn

• Silverlight-during the installation receives an invalid message of (1) data for image corrupted and checksum (2). It is a Mac.

  Silverlight-during the installation receives an invalid message of (1) data for image corrupted and checksum (2). It is a Mac.

  Anyway to install Silverlight on a Mac. Use with Netflix
  pprimm

  http://www.Silverlight.NET/

  Silverlight forums: http://forums.silverlight.net/

  -steve

• NXP media edition Windows; Windows Setup closes during the installation of Image resize Powertoy. Why?

  There is a Microsoft Viewer on my PC (Vista) to work with an image resizer.  I need that on Windows XP at home that I do not abuse my employer time and equipment.  Picture of Windows with faxes on XP does not offer a resizing of the image.

  However, Microsoft offers a free Windows XP Image resize Powertoy.

  I downloaded it from the website of Microsoft and, to each Setup attempt, it closes with the message "Windows® Installer has encountered a problem and needs to close."  We are sorry for the inconvenience! »

  Why?  How is it that a tool of Windows XP is not compatible with Windows Installer?  I have a report on the notebook, but for some reason, there is no way to fix here.

  Can someone please help?

  Will be golden

  Hi, WillGolden,

  You can go to skydrive and download your report here.  Then come back here with a link to the report.

  Open command prompt window

  Type the following command

  SFC/scannow

  Note: There is a space between sfc and / scannow

  Press enter

  The scan will take a few moments.

  Open run and type %windir%\Logs\CBS

  Press Ok

  Browse the crawl log for the System File Checker cannot fix and note the files that cannot be repaired

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  ( http://support.microsoft.com/kb/929833/en-uk)

  Then, open the command prompt window

  Type CHKDSK /F /R

  Press enter

  You will receive a message about the volume must be locked.  You want to monitor during the recovery?

  Press y and press enter

  Restart the computer

  This analysis will take a few minutes.

  What computer restarted, open the event viewer > Windows Logs > Application

  Look for the Winninet consult the results of the analysis

  Start > type Services.msc

  Press enter

  Scroll down and right-click on Windows Installer

  Select Properties

  Under Startup Type, make sure it is set to manual

  Services nearby

  Boot mode safe to reregister Windows Installer

  Open race

  Type the following command:

  msiexec/regserver

  Press Ok

  Note For 64-bit operating systems, you must also register the 64-bit MSI installer again. To do this, click Start, click run, type the following line, and then click OK:

  : \windows\syswow64 msiexec/regserver

  Restart Windows

• STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt and recovery XP says error during the extraction process. Details of error: path not found___

  My friend turned on their laptop packard Bell recently and had the following problem. Windows XP screen loads but is then followed by a blue screen that says STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt. The header checksum does not match the checksum calculated.

  I can't the laptop to go further. I have accessed the Microsoft recovery Panel and try a non-destructive recovery as there are some precious photos that need backup. However, when you select 'no profile' to begin the recovery, I get the message:

  Error during the extraction process. Details of error: path not found

  I'm a bit of a novice when it comes to this sort of thing, but if someone can provide step by step help giving rise to lose photos, I'd be willing to give it a try. I also have XP Home Edition disk that came with the laptop but has never been opened. Any help would be appreciated. Thank you

  You hear your message said something about rpcrt4.dll?  It is important to relay the exact message you see.

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  You use some CD to access this Panel of Microsoft recovery where this "no profile" option is?  I don't know what all this means if it isn't some CD shipped with your system, in which case, I would use it for a coaster instead of something to fix your system.

  If the c:\windows\system32\rpcrt4.dll file is missing or afflicted, you do not start in the last good known Configuration.

  You also will not start in any kind of Mode safe no more.

  Even if you could boot mode safe, you would find that sfc/scannow does not work in Mode without failure in all cases (never).  If you try it, you'll see a message like this:

  Windows file protection could not initiate a scan of protected system files.

  The specific error code is 0x000006ba [the RPC server is unavailable.].

  Failed to start the RPC mode server safe either.

  I can't recreate your error exactly, but it is easy to replace the rpcrt4.dll file.  Looks like you have a working CD drive, so put yourself a Hiren boot CD and when you started on this, you can copy your precious files to a USB device for safety.

  There should be a backup copy of rpcrt4.dll already on your system, here or here:

  c:\Windows\System32\dllcache

  c:\windows\ServicePackFiles\i386

  You need to rename or replace the rpcrt4.dll file which is in c:\windows\system32 and replace it with one you will find the backup copies.

  There should be a backup copy of rpcrt4.dll already on your system, here or here:

  c:\Windows\System32\dllcache

  c:\windows\ServicePackFiles\i386

  When you get the Hiren's CD's, you can use to replace the missing or suspicious file.  If you need help with that, first get the Hiren's boot CD made and start over, then we can continue.

  Do you have a Hiren BootCD you can download here:

  http://www.hirensbootcd.NET/

  On the left, click on download, scroll down, choose the latest version, the download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

  Direct HTTP mirror + Torrent, Torrent Magnet

  Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

  The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.

  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

  Using the Mini XP, you can access Internet, maneuvering around your system, search for files, copy files, replace the files and run the scans for malware, edit the text files (like the c:\boot.ini) etc.

  There are dozens of free and useful tools included in the CD that can be used to repair your system or copy your important personal files on another device (like a USB device or an external drive) in the case where you just give up and decide to reinstall your XP (I hope that you will not make this decision)

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Redraw the images after the rotation of the device

  Hi, all)

  I need redesign my interphace after the rotation of the device...

  I have a method in myScreen,

  public LoginScreen()
  {
  scaleKoof = Display.getWidth () / 320.0f;
  Create the interface elements

  }

  If I coluld call it after rotating all might be good! How can I do?

  scaleRotation - all images are resized to my interpace...

  replace sublayout and check the dimensions, it is called after a rotation.