dust particles SE iPhone under the lens of the camera back

Hi all

I have my iPhone IS for about 5 days now and 2 days ago, I've already noticed a few dust particles under the lens of the camera back.  Went to 2 and yesterdays Apple store or 3 units of demonstration of different colors were particles of dust under the lens too.  I want to just ask if anyone of you guys this?

You would need to take it to an Apple store, to do clean out or replace. Don't try to clean it yourself.

Tags: iPhone

Similar Questions

  • When taking picture with the light in the background with the camera back from my iPhone more than 6 s, there is a clear blue colour square (a bit like a reflection of the light) will appear.

    When taking picture with the light in the background with the camera back from my iPhone more than 6 s, there is a clear blue colour square (a bit like a reflection of the light) will appear.

    someone has an idea of what's going on?

    The blue square is the area of the camera is in point and exposure on.

    Tap on the area actually taking a picture of. For example, if you take a photo of someone int eh the room and the bottom is very light (or dark), tap on the face of the person to turn to that.

    See it-> http://iphonephotographyschool.com/how-to-use-iphones-camera-app/

  • my iPhone 6 more the camera back suddenly blurry when I took photos. can someone tell me what to do?

    my iPhone 6 more the camera back suddenly blurry when I took photos. can someone tell me what to do?

    Check your serial number here: https://www.apple.com/support/iphone6plus-isightcamera/

    -AJ

  • With the front camera, microphone does not work, but with the camera back, it works fine. Please give me solution

    whenever I have to video chat with anyone with front camera on they won't listen to me. Even when I record with fromt camera microphone does not work with the camera back, everything works correctly and even with siri, I can't talk more but when I take a call they can hear perfectly

    Get help with microphones on your iPhone, iPad and iPod touch...

  • Version of the restore software Z30 blackBerry 10.2.1.2102 a downgrade to prove if the camera back is defective.

    Dear community,

    Having just bought recentlly the Z30 once connected to the internet immediately, he went for an upgrade of software to 10.2.1.2102.I then continued to test all the features on the phone to see that my rear camera did not work. I immediately jumped on a forum and found there are others who have experienced a few problems too. I thien tried in vain to reload the software, soft and resets hard have been applied, but to no avail. I have no idea whether or not the rear camera is defective. Then I tried the BBVE and it failed the test of the camera back. Incidentally when rear camera mode it says mode scren failed, camera not found or flash failed. I then need ot a hardware reset in FLIGHT by applying the flight towards the top and the low UNLIMITED to perform a reset which releases all of the applications in use.

    I also read that there could be problems with the memory card so I removed this option to eliminate the problem.

    Not sure if there are defective batches of stock out there but I bought my phone on ebay and he said: PRD-52977-013 manufactured in Mexico 5110913.

    I don't know if the machine worked before the software load went in asking so therefore how to recharge the old version of the software to a version where I can see if the device works or not.

    p.s. The phone I bought was sim free and I use it on the Vodafone UK network and the box was sealed if the seller would have no prior knowledge of the handset, as it was purchased New.

    Thank you

    Allan

    I think you're right. The problem is with the hardware. I see nothing else to try, diagnostics say camera problem. Maybe the seller may exchange it?

  • Dust of blackBerry Smartphones under the screen of my BB Curve 9360

    I have dust under the screen and it's quite remarkable. I have no idea how it got there, only about 1-2 months that I got this phone. What can I do?

    There could be some cracks in your device. Or the part of the screen is not sealed tightly.

    I suggest that you take it to where you have guessed.

  • When I open the camera back, there is a small point on the screen. Tjere is no visible scratches on the lens of the camera at the back. There is a scratch on the lens behind the protective glass?

    When the main unit is opened, a little tiny dot appears in the same place on the screen each time at and clicked too photos. There is no visible scratches on the lens of the camera. Could there be one on the lens within the lens glass on top?

    Consider Apple & will replace your unit with a new one if your unit is under warranty

  • Firefox 3, used to have a drop down menu under the button back to recent pages. How do I get this in FF4?

    FF3 used to have a more recent pages of a tab menu appears under the arrow key to the left. FF4 seems not to have. How I see the history of what appears in the tab say four or five pages back?

    You can get the menu drop-down by clicking on the previous/next buttons or now the left key pressed until the list is displayed.

    If you want the drop-down arrow, you can add it with the add-on of dropmarker rear - https://addons.mozilla.org/firefox/addon/backforward-dropmarker

  • IPhone 5 the camera resolution

    Is it possible to fix the resolution before taking a picture in the settings menu?

    N °

    If you wish, you can zoom in or out.

  • is it true that the importwindow from the cam has been changed?

    is it true that importation of the cam have been changed?

    1. in the connection of the cam, that the importwindow does not open automatically as it did before

    2. until the cam has been positioned in the upper left corner of the importwindow under the CAM, but now in the "devices" section (where formerly only the img files were placed)

    No problem, but now it shows ALL the files into it and not just the mxf files.

    3. I don't see the status of the import more. i.m.o. pretty bad...

    Is this true or can be caused by updating the O.S. of the iMac from scratch?

    1 n °

    2. No, this is not correct behavior. The camera is not recognized as a camera.

    3. progress made in the dashboard? HUD background tasks?

  • Disable the button or to open the camera application

    Is there anyway to disable the feature that allows the camera to open by pressing the button or on the side of my droid?  I have a dashboard mounting that I use to keep my phone while driving, and when I place the phone in, the brackets that hold it in place press this button and open the camera each time.  It's really annoying!  Suggestions?

    There is an application called "Shortcut button" which will give you the results you want.  An once installed open the app and tap "Select application" under the camera on a long button and then select "do nothing".  You can also set to open a different application if you wish, but apparently you want do nothing right.  I hope this helps.

  • Access to the camera before Android with LCCS Webcam component

    Hello

    I'm developing an application of video chat to Android with LCC device, just ask to, default far consulted camera is the camera back, is anyway to specify the use of the camera from the front?

    If it is not supported, what iPhone devices?

    Please advice, thank you!

    Concerning

    If you check the documentation for the android sdk, you will see that there is no front-facing camera support (the returns a single camera and it's always the back) up to 2.3

    The applications that come with the phone (usually performed by the manufacturer) use device support API.

    Sent from my iPhone

  • The right way to face the camera and camera on standby?

    How one brings the camera back to life after the unit returns to standby mode?  What is the right way to manage the device sleep and wake?  Any help is appreciated.

    Hi Sucroid,

    I intend to produce a sample that shows this I hope that during the holiday season.

    Here is some information that can hopefully help you get started...

    When the screen goes to sleep, off camera equipment.  There is nothing you can do about it today, outside of the application one keep awake in your application window. (value SCREEN_PROPERTY_IDLE_MODE SCREEN_IDLE_MODE_KEEP_AWAKE).  Note that this won't save you a user who clicks the power button to force the unit in standby mode.  It will protect you against a situation where your application goes to background or another application requires video resources that are used by the camera.  In these two situations, your application will lose his viewfinder.

    But all is not lost!  There are some events of status, you can listen to that lets you know that the camera stops.  You can listen to these events either with an attached status_callback (applied when starting the viewfinder for example), or by authorizing explicitly state the events using camera_enable_status_event() and waiting for impulses of status.  All these things are detailed in the documentation for the API of photo here: http://developer.blackberry.com/native/reference/bb10/com.qnx.doc.camera.lib_ref/topic/overview.html

    The corresponding lights events are:

    CAMERA_STATUS_RESOURCENOTAVAIL - this event is logged every time that the camera is about to close.  If you have previously called camera_register_resource(), this is the event that listen to you to know that all your camera buffers are about to be démappés - so stop all logic that looks at them and then camera_deregister_resource() camm.  If you do not physically the buffers of viewfinder, then necessarily no need to use this registry/invert mechanism.  It's just there to provide warning and to activate the drivers of the device for you to recognize that it is safe to unamp wait for memory.  Each time the screen goes to sleep, the power button is pressed, or another application has need of resources of the camera, you will get this signal.  If you are curious to know the reason, you can check the 'extra' uint16_t argument in the callback of the situation for one of the camera_powerdownreason_t values.  All video recordings currently active or encodings auto-terminera when this signal is received.

    CAMERA_STATUS_POWERDOWN - event status is reported immediately after the hardware of the device is turned off.  You can't interact more with the camera until this condition is removed.  Note that to capture this event, you will need the user of the status of the event-mode (camera_enable_status_event()) interface, because any reminder of status you can have attached when starting the viewfinder will be cleaned up when the viewfinder stops.

    CAMERA_STATUS_POWERUP - event status is reported immediately after that camera material is fed up after having previously be put off.  Even not not on using status of event-mode interface (camera_enable_status_event()) applies in this case too.

    So, what can you do with this information?

    Well, tuned for CAMERA_STATUS_RESOURCENOTAVAIL will tell you when your viewfinder will close.  At this point, your application must enter a State where he is waiting for an event that will wake it again...

    In most cases, this is the event browser that indicates your application is active or foreground again (NAVIGATOR_WINDOW_ACTIVE or equivalent).

    So when your application is told by browser is it back to the foreground, you can then restart the viewfinder using camera_start_photo_viewfinder() or camera_start_video_viewfinder() according to the requirements of your application.  You will still need to follow the same recipe to start the viewfinder as a cold start your application (for example. Wait for the window of your viewfinder to be filled), but you will not need to reconfigure all the settings.

    OK... which covers 99% of the use cases that you will encounter.  Use case for the 1% remaining, you will need to follow for this CAMERA_STATUS_POWERUP event.  Why?  Well, there is a race condition when things down, in which case if the user wakes up the device while the camera is closing (eg. they struck twice in quick succession, the power button), then the camera will enter its off State, but navigator may actually not report your application it becomes idle.  This is because the infrastructure of power management is waiting actually for the material from the camera to the power off until the system goes to sleep.  If the user wakes up the device upward, then this action is canceled, and the unit enters never actually standby.  In this case of corner, navigator does not say your app to become active, again because he never told your application becomes idle.  So what are you doing?  Well, I have 2 suggestions:

    1. You can follow to CAMERA_STATUS_POWERUP using the event interface mode for the camera equipment.  It's actually the more correct approach and what we are doing internally with the BB10 camera App.
    2. You can use a timer to try to wake up the camera in the case of this corner case occurred.  for example. wait 5 seconds after the signal CAMERA_STATUS_RESOURCENOTAVAIL.  If your application has not been made inactive by browser, then you can try turning it back on the camera.

    I hope this help get you pointed in the right direction and still... I plan on collecting a best-practice appropriate sample that illustrates exactly how to do this when the weather!

    See you soon,.

    Sean

  • iPhone 7 dust under the screen

    Hello everyone I see a dead pixel or dust under my iphone 7 jet black 128 GB should I go to apple?

    If there is dust under the screen, it's a hardware fault.  Bring the phone to Apple for the Exchange.

    Best,

    GDG

  • Unbelievable, dust under the screen of the iPhone 7

    Good night everyone.

    I've posted a few times before here in discussions about the dust under the screen of the iPhone 6 s, which mine was when I bought it, when they changed my screen 9 times and when they exanged to renovated ones and even an Envoy to Ireland brand new with new warranty at all.

    Last Friday I went and waited all night to buy an iPhone 7 hoping being dust-tight its screen would be perfect, and as I got it, I saw something under the protection of screen thinking it was something that got stuck all by placing, but today, I deleted and found which can be seen in the attached picture (he can be seen in the crossbar left angle)

    Is it not possible to exchange it for another iPhone during the day 14 guarantee now that West no stock?

    Thank you very much

    1st world problems are something to see indeed!

Maybe you are looking for