Duty to repair windows Vista after a few updates.

Similar Questions

• Cannot start Windows Vista after you download updates

  Original title: the last time I got a windows vista download it did.not end now if I turn off my computer it won, t wiyhout restart using a rescue disk also can, t open all files except when I connect

  Last time I had a windows down load it didn, t finished and my computer locked up had to use a rescue disk to start

  Hiartco1993,

  1. do you know what download you tried?

  2. do you receive error messages or error codes?

  3 have you tried booting in safe mode?

  You can first try to start in safe mode and try a system restore and check if it helps.

  Step 1:

  You can try to start in safe mode.

  Check out the link for more information on starting your computer in SafeMode below:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  You can try restoring the system to safe mode.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  You can consult the links for:

  System restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/What-is-System-Restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Departure from Windows Vista after the program updates

  I'm having a problem with vista, whenever I have install a new program or update from one of my programs that I have to use my Boot cd to repair vista for it to start windows. could you pls help this is very frustrating.

  Thank you

  Hello Gasskicker,

  I think that there could be important .dll of vista have been corrupted. Please perform the below steps to solve problems.

  (1) make sure that your account is to have any of course rights or grant your account level "Administrator" rights
  (2) from the command prompt, run the command "sfc/scannow" & provide the Vista installation DVD.
  (3) to scan your system with antivirus & Spyware software to delete infected files.

  Also, visit him following MS KB links advanced troubleshooting.

  http://support.Microsoft.com/kb/947821

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;928228

  I hope this helps.

  [If this post can help solve your problem, click on the button 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  -

• Windows vista is 63 92 updated installation and after running for seven hours must be stuck in a loop. How to regain control of my everex computer

  Windows vista is 63 92 updated installation and after running for seven hours must be stuck in a loop. How to regain control of my everex computer

  Hello

  1. have there been recent changes to the system before the show?

  2 is the issue limited to the installation of Windows updates?

  3. do you have security software installed on your system?

  Method:

  Follow the indicated link and perform the steps and check if it helps fix the problem.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  http://support.Microsoft.com/kb/949358

  Note: It is strongly recommended that you back up all your personal files. For more information about how to back up your files, please visit: http://windows.microsoft.com/en-US/windows7/Back-up-your-files

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  Let us know if it helps.

• Repair Windows Vista Home Basic

  My laptop cannot install Windows updates and recommended corrections have failed. The final recommendation is to repair Windows Vista. However, the version of Vista on the disc of the operating system provided by Dell has only the possibility of a complete reinstallation. I had already made the mistake of thinking that I can do a repair and ended up with a complete re - install which of course erased everything on my drive. Anyone know how I can repair Vista when that option not on the disc?

  Hello

  You will need to borrow a Microsoft Vista DVD from a friend to do a repair upgrade installation.

  Recovery discs are generally not those 'repair' options on them.

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

• Envy 17 jump notion j100: black screen after a few updates

  Need help.

  After a few updates, had a blue screen after Windows booted reset. Restart - black the next screen.

  Tried to connect to the other screen - does not not (f4)

  memory, hard drive out - nothing

  hard reset - nothing

  Win + b and start - nothing

  on the power on lock shift - 2 led flashes pause, pause 2 flashes and etc.

  looks like bios, what to do?

  Any solution?

  Hey @serhiox,

  If these steps did not work, try the rest of the other measures in the document to restore the BIOS and update the BIOS if Windows does not start a section of the document updating the BIOS .

  If you can get into the BIOS at all, you can try to reload the default settings? To reload the factory-installed BIOS configuration settings, perform the following steps:

  1. In the BIOS Setup utility, select the tab out.

  2. Select message Load Setup Defaults.

  3. Select Save Changes and Exit (pressing F5 and the Enter key will also load default configuration).

  4. Press ESC, then press Enter to exit the installation program.

  Please let me know how each step works for you.

  Thank you

• Windows Vista cannot complete the update of windows since July 2016

  Windows Vista cannot complete the update of windows

  Since the last update July 2016

  no error message, just perpetually "check updates".

  everything I start the update of windows

  help please

  Hi emiquestion:

  Long 'check for updates...' crashes and slow window updates are a currently a problem common to many users of Vista SP2 - please see the workaround suggested, I posted yesterday over BluesBlaster WINDOWS VISTA 32-BIT updates.

  Note that it is a temporary workaround and updates slow Windows will probably return each Patch Tuesday (the second Tuesday of the month) after Microsoft also releases a new batch of updates to security for Vista SP2 and IE9.  Since September 2016 Patch Tuesday updates are published tomorrow (13-Sep-2016), it would be wise to wait a day or two to execute step-by-step instructions posted on June 16, 2016, in m #l's thread of updates does not, he has been looking for updates for hours and save yourself a bit of extra work this month.  Dalai normally updates its list of Windows kernel mode driver (Win32K.sys) implemented to date required the same evening that the Patch Tuesday, updates are published by Microsoftto the http://wu.krelay.de/en/ .
  ------------
  32 bit Vista Home Premium SP2 * Firefox v48.0.2 * NIS v22.7.1.32 * MMFA Premium v2.2.1
  HP Pavilion dv6835ca Intel Core2Duo T5550 1.83 GHz, 3 GB RAM, NVIDIA GeForce 8400 M GS

• My Windows Vist shows error 8024402f update code, impossible to update windows. Help, please.

  My Windows Vist shows error 8024402f update code, impossible to update windows. Help, please.

  Hi you can try the following...

  Click on Start >
  Type in CMD > 
  Right-click on the result, and then click on run as administrator >
  Then type sfc/scannow , and then press ENTER.
  Reboot your PC and try it a few times.

  Download and install the update tool of the system for Vista (Windows Update hotfix)

  • Updated preparation system tool for Windows Vista (KB947821) [February 2012] 32-bit
  • System Update tool for Windows Vista for x 64 based systems (KB947821) [February 2012] 64-bit
  "This tool is being offered because an inconsistency was found in the maintenance shop windows which can prevent the installation of future updates and service packs software."

  Microsoft technical support suggestions:

  Configure the connection to obtain an IP address automatically

  1. Click on «Start», enter "NCPA. CPL"(without quotes) in the search bar and press"Enter. "
  2. Right-click on the network connection, and then click "Properties". If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. Click Select "IP Version 6 (TCP/IPv6)" and then click "Properties".
  4. Check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  5. Click on 'OK '.
  6. Click Select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.
  7. Check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  8. Click on 'OK '.
  9. Restart the computer.

  Other Solutions for error 8024402F

  You can view these articles the Microsoft KB to fix the problem:

  • You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  • Code error Windows Update 80244016, 8024402f, or c80003fa
  • or see this thread

• I can not open hotmail attachments (updated Automatic Windows Vista, IE8, activated and updated running).

  I have a new HP computer and I can not open hotmail attachments (updated Automatic Windows Vista, IE8, activated and updated running).  When you try to open an attachment, the bar downstairs quickly moves to the right, but never appears a dialog box asking if you want to open or save the file.  Error message I get when I try to resolve it with the suggested steps indicates "module"wintrust.dll"was loaded but the call to DllRegisterServer failed with error code 0x80070005.  I tried to do the same command prompt, but still not received the same error.  Thanks for help anything.

  Hi Paul,.

  Have you tried to download an attachment after you turn off your antivirus?
  I had a problem in the past where the system was performed at Trend Micro Internet Security and Web content filtering (I think that's what it was called) was preventing attachments from download.
  I would like to know what are your results!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• In Windows Mail, after a recent update, I am unable to open a mail directly from my Inbox.

  original title: windows mail user

  user of Windows Messaging after a recent update of Windows, I am unable to open a mail directly from my box in. When I try to open an individual e-mail, the description line fall to the toolbar. Then I have to right click and hit the max selection to open the full screen of my message when I hit the answer, mail electronic message colaspees to the toolbar and I have to repeat the process above... What do I do?

  What is happening is that the window open off-screen.

  For Vista and earlier versions of Windows:

  Right-click on the tab of the window in the task bar and select move. Now, use the arrow keys to get to the screen. Close all other windows except this one and use the cursor to drag the message to the desired size. File | Output and Windows will remember the size and location when you open it again.

  For Windows 7:

  How can I move a window off the screen in Windows 7?
  http://ask-Leo.com/how_do_i_move_an_offscreen_window_in_windows_7.html

• Impossible to solve the problem of Windows Vista Service Pack 2 update! (error code 80073712)

  original title: could not resolve the problem of Windows Vista Service Pack 2 update!

  Hey there,

  I got Windows Vista Home Premium Service Pack 1 in my laptop when I bought it. Recently there was no updates of security (e.g., KB2481109) to install it into my system with a error: 80073712 and I had received a notification from windows to install Windows Vista Service Pack 2update. I tried to install it from windows update, but I got the error: 8024200d. I read the solution on this site and followed by download the stand-alone file and install "System Update Readiness Tool" (KB947821). ". After that I downloaded the standalone version "Windows Vista Service Pack 2" (KB948465) and tried to install it, but I got the error: 800f081f. "» I did Scan SFC which there is "no question of integrity" in the system, uninstalled "Avira Antivirus software" and again tried to install Service Pack 2 , but again, I've got the error: 80073712 After all this I couldn't solve the problem. Please provide some tips if anyone has solved the same or has a solution!

  Thank you very much

  UD

  Hi Electrocuteud,

  You have access to a Windows Vista installation disc? If so, follow the steps in this document to perform an InPlace upgrade. This will reinstall Vista without making any changes to the files and programs on the computer. Even if your data and programs must be safe, it is always advisable to make sure that you have a recent backup before major changes on the computer.

• I recently bought creative cloud, and after a few updates and downloads, my desk right icon now produces an empty rectangle if clicked. How to bring back my list?

  I recently bought creative cloud, and after a few updates and downloads, my desk right icon now produces an empty rectangle if clicked. How to bring back my list?

  I ended the application of uninstalling and reinstalling and that seems to have done the trick. Thanks for the help - it lead me to the right place

• Compaq Presario SR5130NX: Cannot start Windows Vista after failure - HELP!

  Hello! My building has undergone a complete failure so 4 days ago I used it. Power resumed 3 hours later, but I was not able to log on since.
  
  
  
  
  
  Normally, I turn on my PC, and about 30 seconds later, a window pops up asking you my password. After entering it, the PC come by my office. Now, when I turn on the PC, it brings me to a blue screen with a mouse cursor in the Center (which I can move), but there is nothing to click on.
  
  
  
  
  
  When I press F8 during the boot process and choose an option from the window "Advanced Boot Options", I still can't start my computer normally.
  
  
  
  
  
  Here's the "Advanced Boot Options" I tried, after consultation with my brother a little more PC-savvy:
  
  
  
  
  
  1 repair your computer - after I see my black screen that is usual with the words "Microsoft Corporation" under the green bars that scroll from left to right for about 15 seconds, a blue screen appears with the mouse pointer in the Center (which I can move), but there is nothing to click on.
  
  
  
  
  
  2 mode safe - while the PC display several files on start up and down, it stops on "Loaded: \windows\system32\drivers\disk.sys" for about 20 seconds, then proceeds to a black screen with the words "Safe Mode" in the 4 corners and the mouse cursor at the Center (which I can move), but there is nothing to click on.
  
  
  
  
  
  3 safe mode with network - see "Safe Mode" above.
  
  
  
  
  
  4 safe mode with command prompt - see 'Safe Mode' above.
  
  
  
  
  
  5 last known good Configuration (Advanced) - see "repair your computer" above.
  
  
  
  
  
  6 start Windows normally - see "Repair your computer" above.
  
  
  
  
  
  7 debug mode - see "Repair your computer" above.
  
  
  
  
  
  I downloaded a DVD recovery based on Linux in knopper.net, allowing me to access important files, which I copied from the desktop to an external hard drive (4.1 GB iso file).
  
  
  
  
  
  PC Windows XP of my brother has a recovery disk, but my Windows Vista PC did not come with one. I've seen a few paid versions, but looked resources due to cool weather and free shipping.
  
  
  
  
  
  I can't tell if I have the 23-bit or the 64 bit version of Windows Vista, so I downloaded both versions of an open source sourceforge.NET startup repair, which I burned on 2 DVDs. After you run the startup repair program using two DVD, the diagnostic results have been uploaded online at ubuntu.com for review and technical analysis. Here are the links:
  
  
  
  
  
  http://Paste.Ubuntu.com/16018001/
  
  http://Paste.Ubuntu.com/16019372/
  
  http://Paste.Ubuntu.com/16040380/
  
  
  
  
  
  The last report ended with the words "start managed to fix...".  You can now restart your computer. "But I always encounter a blank screen (black or blue) when I try to log on to my PC.
  
  
  
  
  
  Here are my details of PC, if it is useful:
  
  
  
  
  
  Desktop Compaq Presario SR5130NX
  
  Serial number: [personal information]
  
  Product number: GC667AA
  
  Warranty end date: October 5, 2013 (according to Compaq/HP.com)
  
  
  
  http://support.HP.com/us-en/product/Compaq-Presario-SR5100-desktop-PC-series/3436764
  
  
  
  
  
  Thanks for any help you can provide.

  Hello

  Since you already have KNOPPIX I try Gparted and use it to 'clean up' the score because it will stop in an impure State.

  NTFS

  [1]

  [11]

  NTFS-3 g / important

  GParted will try.

  Also, I would consider the old problem with fat systems, floppy disks etc. which sometimes a copy of sys files from a floppy disk to a hard drive has reactivated a bootable system.

  So, if system files have been damaged, then replace them since a Setup disk.  Because he goes to options, what kind of work.

  https://en.Wikipedia.org/wiki/Windows_Vista_startup_process

  • Windows Boot Manager (Bootmgr.exe)

  • Windows operating system loader (Winload.exe)

  • Recovery of Windows loader (Winresume.exe)

• Problem installing Windows Vista after Linix based system crashed.

  So when I bought this laptop it was running Vista, I then upgraded to 7.  After running windows 7 for a few months, I decided to try Ubuntu Linux.  I made a mistake when trying to dual boot and ended up taking my computer windows.  Ubuntu crashed while I was doing something to my Iphone with it and she would not allow me in the operating system.  I got my restore disk and installed windows again, but when I did I found that all my drivers are not installed for my wifi card and the graphics card.  I have the drivers also disk, but here shows all installed.  What should I do to recover my laptop to factory settings?

  So when I bought this laptop it was running Vista, I then upgraded to 7.  After running windows 7 for a few months, I decided to try Ubuntu Linux.  I made a mistake when trying to dual boot and ended up taking my computer windows.  Ubuntu crashed while I was doing something to my Iphone with it and she would not allow me in the operating system.  I got my restore disk and installed windows again, but when I did I found that all my drivers are not installed for my wifi card and the graphics card.  I have the drivers also disk, but here shows all installed.  What should I do to recover my laptop to factory settings?

  Hey SteveZea

  you don't say if you used your laptop to join here or not

  go to your site to manufacturers of portable computer with the computer that you use for here and find a download section

  find the drivers for your laptop model number, download and save if you use another computer to get here

  copy to flash drive, if you use another computer to do this and reinstall on your laptop

  If the problem persists then contact the manufacturer of your laptop as their recovery process is not microsofts you have problems with

  Walter, the time zone traveller

• Home PC will not boot Windows Vista after updating sound card drivers.

  Okay, so I built a brand new pc last night. A worked like a charm, perfectly executed and all. Installed a new sound card, opened it and a few minutes put in my computer, install the drivers and had it works perfectly. Windows loaded perfectly, no problem at all anywhere. Then I'll update the drivers for the sound card, a large download but he finished. He was trying to install the drivers, then while he was, I've been on google chrome on facebook and then randomly, I lost the internet connection. My receiver wifi for my computer was fine and turned on and running great, but for some reason any my computer does not pick up a signal even if all my other devices don't. When the drivers have been installed and the updates are finished, I rebooted my computer.

  Problems from there. I turned the computer back and tried to boot windows, but computer science got to the vista loading screen and then resets. He made several times. So I tried to boot into the last known good configuration. I spent the loading screen, then a flashed blue screen with a bunch of words and he said something along the lines of "Windows has encountered an error", but disappeared in literally one second about. Then the computer shuts down. Since then whenever I try to start in windows, I don't yet get to the loading screen, any choice I use to try to start in windows, no work. When I choose one my computer just is a black screen. It loads the bios very well and everything works great but the OS is the question.

  Any suggestions?

  Startup Repair.

  Startup Repair is a Windows Recovery tool that can fix certain problems, such as missing system files or damaged, that might be preventing Windows to start.

  http://windowshelp.Microsoft.com/Windows/en-us/help/f768809f-ED90-415f-a83f-89b42108b3551033.mspx#EFF

  Startup Repair: frequently asked questions
  http://windowshelp.Microsoft.com/Windows/en-us/help/5c59f8c1-b0d1-4F1A-AF55-74f3922f3f351033.mspx

  See if you have any installation DVD.

  Windows Vista download Recovery Disc
  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Have you tried running your machine in the Windows environment?  If you have an installation DVD that you can start (or an option of startup repair via the F8 Safe Mode screen), try running the command prompt, among the options provided when you walk down the path of the Startup Repair. Do not perform the Startup Repair, just pick up and go to the option to the command line (from to choose a recovery tool dialog box) and try to run Chkdsk C: /r from the.

  How to use the command prompt in the Windows Vista recovery environment
  http://www.bleepingcomputer.com/tutorials/tutorial147.html

  You can even try a restore of the system of this environment.

  With the help of the restoration of the system to Windows Vista recovery environment
  http://www.bleepingcomputer.com/tutorials/tutorial142.html

  How to use system restore to log in Windows Vista when you lose access to an account
  http://support.Microsoft.com/kb/940765/