Dv6-1001xx 4 GB of RAM, Windows 7 - xD card reader problem
I did a fresh install of Windows 7 Ultimate 64-bit. Before I did and was able to get everything going, or so I thought, got all the drivers. Apparently the card reader will not read my Olympus xD 1 GB card. Pilots are JMicron and even tried to uninstall and install the Vista drivers, no luck. It can read a SD card ok, so I thought, must be the map, except that my written camera pictures of her very well AND I tried it in a laptop (Vista Home Premium 32-bit) DV2200 and the Ricoh card reader could read in this laptop, without any problem. I have 2 other cards xD more little ones who do not read in the DV6, but are well within the DV2200. I have read this map ok until I installed Win 7, when I was with Vista 64 bit. I did my install of Win 7 by letting it rename my old Windows to Windows.old folder, so I guess this is a new installation and not an upgrade, given that I wasn't using an upgrade disc. I'm puzzled! Shows Device Manager driver technology of memory and below, 4 controllers: JMB38X MS Host Controller, JMB38X SD Host Controller, JMB38X SD/MMC Host Controller and JMB38X xD Host Controller. All show they work properly. I don't see anything else to understand my problem, but if you need more info, I will not provide it. Thanks for trying to help me!
Test your player on other xD Card.
«Problem with access point or wireless adapter»Hi, I just bought a new laptop & I have the extreme difficulty to stay connected to the internet. When I run Windows Network Diagnostics, error reads 'Problem with wireless adapter or access point' and fails to solve the problem. Help, please... Thank you, Maria
· What operating system is installed on your computer?
· You have installed the latest drivers for wireless network card?
Follow the suggestions below for a possible solution:
Method 1: Start your computer in a clean boot state in order to check if the applications of third parties or startup items is the origin of the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
Note: After troubleshooting, make sure that you configure the computer to start as usual as mentioned in step 7 in the above article.
Method 2: See these articles for solve wireless problems:
Why can't I connect to the Internet?
How can I troubleshoot network card?
Windows wireless and wired network connection problems
Let us know if that helps.
I have a desktop HP Pavilion H3V97AA #ABG, no model 8 p6 - 2304 has Windows running.
How to view photos on an SD card using windows 8. When the SD card is put in the drive, it does not open automatically, and I can't find a way to do it. There is no SD reader showing in my Device Manager list. I need help please.
Not all types of SD cards will be recognized in your PC. Use only SD and SDHC cards.
Look at this MS post on SD card reader problems. There are some excellent suggestions.
Also, go to start and type in autoplay. Then on the right, click settings, and then press ENTER. You can then change the settings for each type of removable media.
Hello guys I have a laptop NB231UA #ABA. I have recently upgraded to windows 10 and now my card reader does not work and I can't find a driver for this work. Can someone tell me please in the right direction to solve this problem? I would really like my card reader works on Windows 10! Thank you!!
See if the driver windows 7 works for you...
This package contains the driver for the JMB38X Host Controller Card Reader in laptop models supported and operating systems. JMB38X card reader supports the following types of media: SD, MS, MMC and xD.
File name: sp45180.exe
I can't get my Dell Insperion to recognize a second SD card. It will recognize a card inserted in the integrated housing initial, but later maps not be recognized. If I restart the computer then it will recognize a card again. I get the following error message "Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38) "your help would be appreciated.
SD memory card
Device type: hard drives
Location: SDA Standard compatible SD Host Controller
Error message: Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)
Driver provider: Microsoft
Driver date: 2006-06-21
Driver version: 6.1.7601.17514
Digital signer: Microsoft Windows
File version: 6.1.7600.16385 (win7_rtm.090713 - 1255)
If you try to insert two cards at the same time that would be normal given that the card reader is bound to a single channel of USB. It all depends on how your computer has been configured when it was built.
If you remove the first card and insert another card it is possible that you are not just right-click on the map in file Explorer and ejecting the card before you remove them.
I have a Dell inspiron 15 R 5520 bought in December about 3 month and a half ago. Now, I tried to attach a HDMI Cable VGA for monitor or TV, but it does not work. It's as if the cable is not connected at all.
I have the latest drivers, it seems to work, but somehow, it does not recognize the HDMI output: (.)
If anyone knows something about to help I'll be very gratefull. I really need to work with 2 monitors: (.)
You cannot change a VGA connection with just a cable HDMI - HDMI is digital. VGA is analog. You need a D/A converter to make this connection. For example,.
Often ill put a SD or CF card into the internal card reader and it disappears from my computer and Device Manager. No just went wrong! The only way to recover is system sleep and power cord to "unplug". Works for 2 or 3 times and the same thing happens. Dell tried a few software and settings of bugs but that did not work. Then the sent me a new media card reader but same thing happens. Now, they want to replace motherboard and power supply, but I doubt that a is too. Any help or ideas would be great.
Yes, a very common problem with my XPS 8700. Has been through a lot of readers of cards, motherboards, etc.
(1) make sure you eject the card reader in the computer drives; the old 'My Computer'. Yes, of course, it's elementary, but several times I just grabbed the first card reader. It applies to remove it from your camera. Don't forget that the camera is turned off before removing.
2) the "fix"
It can be irritating, but it you have to remove the side panel and pull the wire connecting the card reader to the motherboard to the wide where it attaches to the motherboard. Then just reconnect and the card reader drives will reappear.
Technically you should do with the machine power off and unplugged power cord, but I use one of these long slender beak pliers to reach in and get a firm grip on the connector. Just a quick pull and a quick replacement. I would look at the readers to return what they have always done for me. I don't know if it is successful with the machine off. You must be very spastic to not be able to disconnect and reconnect the small connector without touching anything else. A light is useful depending on the ambient light.
Personally, my CPU is just off the right side of my office, so I always leave the left in Panel enough air flow, but it is certainly easy enough to remove.
It is difficult to say how long it will last. Finally, it will fail again may 20 all-purpose or more, but I keep the needle forceps nearby. A 2 minute job.
I installed Win 7 on my TECRA M2 and everything worked well at the same time... except for one thing! The SD card reader is not recognized (works well with XP).
Thanks in advance
The card reader is listed in the device with the yellow exclamation point Manager?
Normally, I suggest that you should try the Windows Vista driver card reader, but there is no driver on Vista card reader available on the Toshiba site.
So it seems that you have to live with this problem or you try a driver from another laptop computer card reader
I just installed windows 7 on my computer because vista made me a lot of problems. And during the installation of the drivers, I noticed that there is no driver for the card reader for windows 7. Card reader does not work with the driver for vista. Anyone else have the same problem? How do solve you?
I am in need to upgrade my memory of's laptop (DV6-3206AX). At the present time it is 4 GB and I thought to upgrade to 16 GB.
The reason for this upgrade is, I work as a developer and use many technologies and software requiring a huge memory tell SharePoint, SQL Server, DMS systems. I tend to play with these technologies on my laptop and of course to learn and build solutions. Now 2013 SharePoint requires more memory, I would need to increase the memory of my laptop.
My concern, I am not sure weather my laptop wouldn't support 16 GB or not? If so, then this high memoery would result in additional heating.
Configuration of the laptop
- AMD Phenom II N970 (4 c, 2.20 GHz/4 x 512 KB / 3.6GTs)
- 4 GB RAM DDR3
- 500 GB SATA HARD DRIVE
- DVD +/-RW double layer with LightScribe drive
- 15.6-inch HD (1366 x 768) LED backlit BrightView
- AMD Radeon HD 6550 (discreet, dedicated 1 GB)
- 10/100/1000 LAN, 802.11 b/g/n WLAN
- Dolby Digital Audio Advance with speakers Altec Lansing, Webcam, media card reader
- 1 x HDMI, 1 x VGA, 3 x USB 2.0, 1 x USB/eSATA, 1 x RJ-45
- AC adapter, battery, power cord
- (Windows 7 Home Premium pre-installed) Windows 8 Professional upgrade.
Any person who has knowledge or have already tried on similar systems, share your experience.
Thanks in advance.
You machine is not in the following list:
Based on this, it supports ONLY 8 GB.
You can buy from them, or use the information to buy elsewhere.
I have an old Pavilion DV6 3240Br and just upgraded to windows 10. Unfortunately, I can't find a driver for my system. HP said that it will not develop specific drivers for my device. It uses a broadcom 4313gn 802.11b/g/n wireless card. There is a driver (maybe another portable model) that works with this broadcom card in 10 x 64 windows?
The only suggestion I can offer is to try the latest Broadcom driver published for this model of wlan for W8 map...
220.127.116.11 Rev.A (November 12, 2014)
Microsoft Windows 8 (32-bit)
Microsoft Windows 8 (64-bit)
Broadcom wireless LAN drivers are required to activate the built-in Broadcom wireless LAN adapter.
Try to install the driver manually if auto installation does not work.
My first question:
I have a laptop HP Pavilion DV6 584037-001 which originally had windows 7 pre-installed on it, but later, I installed windows 10. I would like to know where I can find my windows product key - please help me.
How can I make sure that the BIOS of my laptop will recognize a USB key, after that I installed an SSD in my laptop so that I will be able to use the USB to install an ISO Windows 7 Home Edition?
The ISO Windows 7 Home Edition will include all its drivers?
My card reader SD HP Pavilion dv6 does not work after windows 8 upgrade (6 months ago). Previously, it was working fine when I was with Win 7 (which is the default OS with this laptop). I don't find the device in Device Manager (under the peripheral system or hard drives). Read the similar section in the HP forum, but it did not help as much as the device is missing in this case. Can anyone help?
Install the driver from Realtek for Windows 8 card reader.
Please post your results.
My pavilion g6 screen is fluctating when I formatted, it stop when the window is updated the exist.but problem can not now playing 3D games is amd 4g ram window 8.1
I offer this suggestion.
If you ask a help, it is best to register the exact model number or product number. Probably your G6 is unable to do as you want, because it's a laptop with limited capabilities. Then, without your model number exact number/product, it is difficult to know.
(1) "my screen pavilion g6 is fluctating when I formatted it"... why format you the disk? ".
(92) ' it stop when the window is updated to the existence of the problem "... what stops?
Product name: HP Pavilion dv6 Notebook
Serial number: CNF1014QCR
Product number: LK364PA #ACJ
HP Pavilion dv6-3208tx
I'm using Windows 7 ultimte. a few years back when win8 came, I installed it but it did not result and came to know that it was not compatible to my turn. so I revenue. Can Windows 10 now released with free update, I switch to Windows 10?
Is it compatible with my laptop?
It seems that you have not installed the AMD drivers. Go here http://support.amd.com/en-us/download/mobile?os=Windows%2010%20-%2064, download and install this driver. PM me if it works for you
Maybe you are looking for
I published a series of collections of comics student and want that they the same "series" so that they stack in iBooks. I put in the same series (2016 Comics) for each volume, but after the publication and download of the iBook store, they appear se
I recently updated my A60 with new dvd, memory, and hard drive.Upgrades to Vista and everything works perfectly except that I can't find an update for my display driver. Just as standard graphic adapter shows and I can't get all the 3d features on it
I upgraded to 8.1 Windows pro 64-bit on my HP divide x 2, and network controller has now no driver, as well as another device. I don't know where to find the drivers for the latter. Network controller: PCI\VEN_8086 & DEV_08B3 & SUBSYS_00708086 & REV_
I CAN'T ACCESS MY SAVED DOCUMENTS THAT I SAVED MICROSOFT OPEN OFFICE 3.3 PLEASE HELP AS I HAVE IMPORTANT INFORMATION IN THESE FILES THAT I NEED ACCESS
Problems with my husbands laptop. So, I would like to re - format except Windows came pre-installed, and I do not have the disks. Network Diagnostics show a connection to internet (in fact, I can see data sent/received). But, browsers will not open.