DV6 1055ee process went 100% constantly - edited and moved from previous thread

Similar Questions

• CAN´t burn on a DVD. Process went up to 98% and then rejected the disc. The message is "run time error: unknown exception."

  Can´t burn on a DVD. Process went up to 98% and then rejected the disc. Is the message "run time error: unknown exception. . Cannot burn to a folder either. Process finishes, but the folder is empty. The pc has 474 GB of space. The 61-minute video has some photos 1000 x 750 pixels in size; files (.m2ts and .mp4). using DVD - R. What can I do?

  Rayo

  Thanks for the reply.

  Have been able to translate what I wrote in the numbered validation 1? There's a translate button in the bottom right of each message. Just don't combine English and Spanish in the post. Must there not having that one language in the post of the button translate work. Do not know why. But that's the way it seems to be.

  Given that you can't burn your Timeline on disk or on the record, it seems that the problem is probably in the timeline content somewhere.

  Please reread what I wrote in post numbered 1 to explore the contents of the timeline. If you did that? I will write more on that the next

  If necessary.

  If you have problems in communication, please let me know. I'll re - write my suggestions if necessary.

  Thank you.

  RTA

• copy and paste from word document pdf document

  I want to copy and paste the information from my word document to my pdf document, sometimes it is difficult to make it stick. Y at - it an easy way.

  Not really. This is not normal or regular way of working with PDF files, for which edition is a last desperate resort.

  Generally, you can stick once you have selected the right to the tool for editing and selected from the existing text, but there is little useful reflow. You should do all the work in Word if possible.

• I accidentally put 100 files on my desktop and it went to black screen and will not work

  I accidentally put 100 files on my desktop and it went to black screen and will not work

  Hello

  Following methods and check if that helps.
  
  Method 1:

  Step 1:

  Start your computer in safe mode and check if it starts very well.
  
  Step 2:

  If the system starts in safe mode, then there would be a third-party software, causing the issue to occur. I wish that you start your machine in a clean boot State. Clean boot helps eliminate conflicts of third party software.

  Note: Follow step 7 to your computer as usual.

  Method 2:

  If this does not help, you can perform System Restore in safe mode.

• File, edit and help menus in the process of disappearance

  When starting Adobe Reader 10.1.4 everything looks normal as shown below.

  http://i.imgur.com/ucLKz.PNG

  After about 2 to 4 seconds the file, editing and help menus disappear suddenly, looking like that.

  http://i.imgur.com/t3LRo.PNG

  This occurs for each open PDF and happens even if the player is opened by itself without a PDF file. I tried uninstalling and reinstalling but the problem persists. The Help menu is usable long barely enough to perform a repair installation, but it does not help. F9 do not bring them back. The system is Windows 7 64-bit. Any ideas on how to solve this problem?

  Check the JavaScript file to see if you the other files that the *. BIN file.  If you do, then move the extras out of the JavaScripts folder and restart Adobe Reader.

• com Apple.XPC.launchd process crash reports constantly present with high CPU

  There is a process"Crash report"in the activity monitor which uses 10 to 25% constantly disappears and reappears. When I leave it to activity monitor it will be right back. In addition, the MacBook fan is going crazy. In the systemlog, I see this article several times per second:

  com Apple.XPC.launchd [1]: (secagntd) Service worked only for 1 seconds. Push the respawn in 9 seconds.

  com Apple.XPC.launchd [1]: (secagntd) Service worked only for 1 seconds. Push the respawn in 9 seconds.

  There are a lot of Crash reports in the OS X Console. The Crashlog looks like this:

  Process: secagntd [1030]

  Path: / usr/local/bin/secagntd/secagntd

  ID: secagntd

  Version:?

  Code type: X 86-64 (Native)

  Parent process: launchd [1]

  Manager: secagntd [1030]

  User ID: 0

  Date/time: 19:15:25.985 2016-07-31 + 0200

  OS version: Mac OS X 10.10.5 (14F1909)

  Report Version: 11

  Anonymous UUID: 75C82E52-67A5-8A7F-56CA-FB9B99BB5C0E

  Time since started awake: 2900 seconds

  Crashed thread: 0

  Exception type: EXC_BREAKPOINT (SIGTRAP)

  Exception codes: 0 x 0000000000000002, 0 x 0000000000000000

  Request for clarification:

  dyld: launch, loading of the dependent libraries

  Dyld error message:

  Symbol not found: _wlScanBSSID

  Referenced from: /usr/local/bin/secagntd/libwpsapi.dylib

  Intended for: /System/Library/PrivateFrameworks/Apple80211.framework/Versions/A/Apple80211

  in /usr/local/bin/secagntd/libwpsapi.dylib

  Which application uses the secagntd? How can I get rid of these error reports?

  Try a SMC reset. Article covers when necessary, but this will not affect anything.

  Reset the SMC

• Firefox 3.6.3 &.4 uses 100% of CPU and not will not always open or close

  Firefox intermittently uses 100% of CPU and I have to manually turn off the computer. Firefox starts or finiosh correctly, the process is alive and that I have to use the Task Manager to end the process until I installed IE7, as I can not access banking by internet with Firefox. Very disappointing as I have ben an enthusiastic user and promoter of FF.

  This has happened

  Each time Firefox opened

  == After upgrade to 3.6.3 and isn't better with 3.6.4, despite the removal of all add-ons

  I have exactly the same problem. FF stay below 50% CPU.

• How for-loop to calculate RMS with length of 100 samples window and step 1 sample window

  Hello world

  I'm trying to make a transition from Matlab to Labview signal processing needs... Specifically, I need to smooth out and quantify a randon, two-phase sampling signal ~ 128000 in length... In matlab, I so calculate the RMS with a length of 100 samples window and no window of 1 sample to smooth.linear evelope signal; do my calculations of amplitude...

  I have a problem to do in Labview... The matlab code that I would use normally is:

  ___________________________________________________________

  Variables to assign % RMS

  x = signal of interest;

  window_length = 100;

  window_step = 1;

  Calculation of % RMS

  EMG = x ^ 2.

  index = 0;

  nWindows = floor (nrows - (window_length - window_step)) / window_step;

  EMG_rms = zeros (nwindows, matches); % The pre-allocating memory

  j = 1:window_step:length (EMG) - window_length + 1;

  index = index + 1;

  EMG_rms (index, = sqrt (average (EMG (j: j + window_length-1,));))

  end

  ________________________________________________________

  I tried many times with the loop for, but no luck... Ingore smileys... They must be a colon (:, to indicate all lines) followed by a)...

  Any suggestions?

  Thank you

  
  

• I want to take backup of Active directory in Server 2008, Enterprise Edition. and I want to use this backup in Server 2008 R2. is this possible?

  Urgent please give me a Solution. I want to take backup of Active directory in Server 2008, Enterprise Edition. and I want to use this backup in Server 2008 R2. is this possible? If possible tell me that the process .it is a domain controller. If there is any tool? answer me. Thanks in advance.

  That you were previously informed

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-security/i-want-to-take-the-backup-of-Active-Directory-in/d7aa33cd-5a4a-40D1-BCAC-70743cd4372d

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  Don

• When I turn on my computer, the shockwave plugin has been constantly unresponding and it crashes. An error pops up (x 000...)

  When I turn on my computer, the shockwave plugin has been constantly unresponding and it crashes. An error appears (x 000...), could not see clearly, as it happens too fast and my computer restarts. After restarting it brings me to the reovery Manager, so I decided to reformat but an error pops up (error 100a).

  When I went to check the disc, that all satisfied the test except the HDD test failed, the problem was bioshd-8. The computer just always brings me to the Manager of recovery even when I want to start windows normally. Really need help. Thank you

  Hey, Izaya_Orihara
  If you encounter any problems with your HP computer?

  Method 1
  How to fix your damaged OS files:
  1. close all of your applications.
  2. click on start.
  3. Type "cmd" on ' search '.
  4. right click on "cmd" and click "Run As Administrator" and click OK.
  5. Enter "sfc/scannow" (without the quotes).
  6. press ENTER.
  7. If is done, you must restart your computer.
  If you do not work with this method, try the second method.

  Method 2
  Install Windows Vista SP2:
  You must install SP2 from here: http://www.microsoft.com/en-uk/download/details.aspx?id=16468
  And the problem has been corrected.

  If the two methods don't work, if you have a system recovery disk, open your CD/DVD drive and the put and shut it down.
  And can solve problems with your computer.

• Driver went on a pad and perform a system restore, the hardware is not installed but the same problem.

  I have Vista Home Basic. I have a HP printer that whenever I logged in re-installed drivers. So I decided to uninstall all printer and software and re-install fresh. All seemed well and good work but if I restart or stop and come back on the laptop tells me a driver went on a buffer and performs a restore of the system. The system restore seems to work and restores me awhile before I re-installed the printer. But again if I restart or stop it has the same problem. the pilot and buffer. I have not yet installed or reconnect the printer because it restored. I don't know much about computers and I don't know what to do. I wanted to kind of do a clean install of Vista but it comes preinstalled on my laptop so I don't have a disk and that I read removing the drivers does not seem an option.

  Hi ChristopherParvin,

  You did it happen any changes made to the computer before the show?

  Method 1: Try the following steps.
  a. log in your computer using an administrator account.
  b. Click Start and then click Run.
  (c) in the Open box, type regedit and then click OK.
  d. Locate and click the following registry key:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\LPTENUM5. Right click on the registry key and then click on remove.
  e. under confirm delete key, click Yes.
  f. close the registry editor and restart your computer.
  
  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7

  Method 2: I suggest to install the drivers of clean boot and then restart the computer and check if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: follow step 7 of section of boot KB929135 to the computer in normal mode.

  Method 3:
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

• I am looking for an upgrade at any time key for windows 7 Professional or ultimate edition and cannot find a place to buy a

  I am looking for an upgrade at any time key for windows 7 Professional or ultimate edition and cannot find a place to buy one any where can someone help.

  Original title: Windows 7 Upgrade

  At any time the updates are most of the time is no longer available. However a commercial version of 'Upgrade' (not an OEM) will also do what you want. Only downside is the cost $$$ that Windows 7 is in short supply.

  Amazon: http://www.amazon.com/Microsoft-Windows-7-Ultimate-Upgrade/dp/B002DHLV8S/ref=sr_1_5?ie=UTF8&qid=1390672154&sr=8-5&keywords=Windows+7+upgrade

  All you have to do is enter the product key.

  =============================================================

  Windows 7 Anytime Upgrade: Instructions

  First read this: Windows Anytime Upgrade: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Anytime-Upgrade-frequently-asked-questions
  Subdivision: What should I do if I bought a package of Windows Anytime Upgrade key card, but there is no upgrade key inside?
  Answer: If you bought a package of key card upgrade and the upgrade key is not inside, carefully read the instructions on the packaging. You may need to go online to get your upgrade by using the PIN key which is included in the package.

  Note: Windows Anytime Upgrade is available for purchase online in Australia, Belgium, Canada, Germany, France, Italy, Japan, Netherlands, Spain, Sweden, Switzerland, United Kingdom and the United States.

  If you encounter problems recover your key product using your PIN code, please use the resources below.
  www.windows7.com/getkeysupport.

  Note: Retail 'Full' or 'Upgrade' product keys will work when you use the Express Upgrade feature.

  ======================= Upgrading ======================================

  No need to re - install Windows 7, just use the instructions of setting "Anytime" below.
  Note: This assumes that you upgrade from 32 bit to 32-bit Windows 7 OR 64 - bit to 64 bit.

  If you bought a package of key card upgrade and the upgrade key is not inside,
  read carefully the instructions on the package.
  You may need to go online ( https://windows.getmicrosoftkey.com/) to get your upgrade key
  using the PIN, which is included in the package.

  To start the upgrade process:
  Click on start/search and enter the words: Express upgrade
  Then, in the list of the search results, click on "Windows Anytime Upgrade".
  Then follow the prompts on the screen anytime upgrade.
  Basically, all you need to do is enter the Windows 7 upgrade product key.

  Alternative methods:
  (Located at the top right) Start/Control Panel/small icons option / click the "Windows Anytime Upgrade".

  Enter the text below into the run (Windows KEY + R or a command prompt) dialog box:
  %windir%\system32\WindowsAnytimeUpgradeUI.exe

  Upgrade to another edition of Windows 7 by using Windows Anytime Upgrade
  http://Windows.Microsoft.com/en-us/Windows7/upgrade-to-another-edition-of-Windows-7-by-using-Windows-Anytime-Upgrade

  A 'step by step' to go through an upgrade to a lower edition of Windows 7 to a higher edition of Windows 7:
  http://www.howtogeek.com/HOWTO/14943/how-to-upgrade-your-NetBook-to-Windows-7-Home-Premium/

  -Windows Anytime Upgrade in Windows 7 - troubleshooting

  http://www.thewindowsclub.com/Troubleshooting-Windows-Anytime-Upgrade-in-Windows-7

  Also the reinforced system - method #2 tool (download and run the tool: "Checksur.exe")
  http://support.Microsoft.com/kb/947821
  (System resources, such as file of data, even in the data memory and registry data, can develop inconsistencies during the lifecycle of the operating system. The system update tool attempts to resolve these inconsistencies).

  -Anytime Upgrade may not work for all versions of Windows-

  Note: Retail 'Full' or 'Upgrade' product keys will work when you use the Express Upgrade feature.
  Upgrade Express 'can' not work (check with the manufacturer of the computer support team) for users who have the OEM and integrators of systems product keys, this applies also to the VL (Volume License), keys (KMS) users management server should consult with your administrator before attempting to perform an Express upgrade. MSDNAA or key teaching will not work with the Express upgrade.

  -Anytime Upgade options-

  Windows 7 Starter to Windows 7 Home Premium
  Windows 7 Starter to Windows 7 Professional
  Windows 7 Starter to Windows 7 Ultimate
  Windows 7 Edition Home Premium to Windows 7 Professional
  Windows 7 Edition Home Premium to Windows 7 Ultimate
  Windows 7 Professional to Windows 7 Ultimate

  J W Stuart: http://www.pagestart.com

• Percentage of the processing load = 100

  Hello

  The guys I worked with 3 IPS 4260 2 and a 4270 yesterday, I noticed that the Inspection is RED. On the 4260 is the responsibility of the inspection.

  SJDetec1 # sh - virtual statistical sensor | Load Inc.

  Percentage of the processing load = 99

  On the 4270!
  DCDetect1 # sh - virtual statistical sensor | Load Inc.

  Percentage of the processing load = 100
  DCDetect1 engine # sh - statistical analysis

  Statistics of scan engine

  Number of seconds since the start of service = 174759

  The TCP connections followed by second rate = 0

  The rate of packets per second = 4711

  The number of bytes per second = 8402

  Statistics of receiver

  Total number of packets processed since reset = 823334516

  Total number of IP packets processed since the reset = 822979042

  Statistics of the issuer

  Total number of transmitted packets = 823478816

  Total number of packets rejected = 0

  Total number of packets reset = 0

  Fragment reassembly statistical unit

  Number of fragments currently in FRU = 0

  Number of datagrams in FRU = 0

  Stream TCP reassembly statistical unit

  TCP stream currently in the embryonic State = 0

  TCP stream currently in the established State = 0

  TCP stream currently in the closing state = 0

  TCP stream currently in the system = 0

  The TCP packets currently queued for reassembly = 0

  Signature database statistics.

  Total active nodes = 16115

  Nodes matching the IP addresses and the ports TCP = 3438

  Nodes matching the IP addresses and the two ports UDP = 29

  Nodes matching the two IP addresses IP = 1715

  Statistics for Signature events

  Number of SigEvents since the reset = 153308490
  For example in the 4270 we cross almost nothing the sensor... And his works not in mode Supreme. Why is the burden of Inspection that high? In the 4260 is the same... It works in mode Supreme...  There are alarms for packets missed as well.
  I was see several discussions for the same reason, but none has a solution. The problem with the inspection workload is random. During the day, sometimes it high and sometimes low.
  Cisco Intrusion Prevention System, Version 2.0000 E4

  Update of signature S499.0
  Any notice will be really appreciated.
  Diego.

  Hi Diego,.

  I would go ahead and open a TAC case at this stage we take a glance.

  Best regards

  JT

• After you have reinstalled windows 7 Ultimate edition (and update), my monitor drivers are gone

  After you have reinstalled windows 7 Ultimate edition (and update), my monitor drivers went (poster generic non-pnp monitor Device Manager). I have viewsonic va1916w monitor, and I can't find the drivers on the official website of viewsonic. Where can I find it?  Thank you

  Drivers for Vista & Winxp, the two bit versions are available on the website of decision makers

  http://www.ViewSonic.com/products/archive/va1916w.htm

  The issue may have been caused by updateing your system drivers from somewhere other than your PC manufacturers or the motherboard manufacturers site, in the case of a generic desktop computer

• ORA-19815: WARNING: 42949672960 bytes db_recovery_file_dest_size is 100.00% used and has 0 bytes remaining available.

  Hello

  When I try to start my database, I get this error:

  SQL > startup;

  ORACLE instance started.

  Total System Global Area 8551575552 bytes

  Bytes of size 2245480 fixed

  2365590680 variable size bytes

  6157238272 of database buffers bytes

  Redo buffers 26501120 bytes

  Mounted database.

  ORA-03113: end of file on communication channel

  Process ID: 9789

  Session ID: 321 serial number: 3

  I checked the alert log file and concluded that,

  Errors in the /u01/app/oracle/diag/rdbms/dev/dev/trace/dev_arc1_11834.trc file:

  ORA-19815: WARNING: 42949672960 bytes db_recovery_file_dest_size is 100.00% used and has 0 bytes remaining available.

  ************************************************************************

  You have choice to free up space in the recovery area:

  1 consider changing STRATEGY OF RETENTION of RMAN. If you are using Data Guard

  then consider changing POLICY of DELETE ARCHIVELOG RMAN.

  2 back up files on a tertiary device such as a tape with RMAN

  SAFEGUARDING RECOVERY AREA command.

  3. Add space drive and increase the db_recovery_file_dest_size setting to

  reflect the new space.

  4 remove the unnecessary files using the RMAN DELETE command. If a service

  the system control has been used to remove the files, and then use the RMAN DUPLICATION and

  Commands DELETE has EXPIRED.

  ************************************************************************

  Arc1: 19809 error creating archive log file at "+ RECO.

  ARCH: Stopped archiving, error occurred. Will continue to retry

  ORACLE Instance dev - archive error

  ORA-16038: log sequence 1 # 46 can be archived

  ORA-19809: limit exceeded for file recovery

  ORA-00312: 1 1 online journal thread: "+ REDO/dev/onlinelog/group_1.284.879765261".

  To do this,

  I can't connect to database, so I deleted the archivelogs manually from + RECO/DEV/ARCHIVELOG/and tried to start the database once again, still the same error.

  The problem here is that I can't open the database, so I am unable to increase db_recovery_file_dest_size or connecting to RMAN and remove the archivelogs.

  Any suggestions on how to fix this?

  Thank you

  bootable media;

  Than the command again a problem.

  ALTER system set db_recovery_file_dest_size = 50G scope = both;

  ALTER database open;

  Best regards

  mseberg