DV6-2155dx LCD mounting kit

I had my screws in a medicine bottle on my desk and my lovely wife ended up throwing it.

Can Whare I get a kit with just the screws for mounting the LCD for my DV6-2155dx?

I have everything else, just don't screw :-(

Please visit this page HP Partsurfer for a list of parts for your dv6-2155dx. There are several sets of screws indicated, however it seems that "HP p/n 512362-001 - kit of various screw - for the Billboard" is the piece you're looking for.

Please send Bravo

Tags: Notebooks

Similar Questions

  • Pavilion dv6-2155dx: need to fix the card wifi for dv6-2155dx

    Hey guys. I have a laptop HP Pavilion dv6-2155dx with a Intel Centrino Wireless - N 1000 wifi card. The card was to die for a long time now and about to go off completely. All other PCs and phones connect properly to the internet here, except that this laptop connects, but drops to around every 15 minutes, limited connectivity or so and I have to turn off the wifi and then turn it back on to operate for another 15 minutes. Its incredibly annoying and I need help to make sure that I have buy the correct replacement so that it will work. Here is the info I have:

    HP Pavilion dv6-2155 x
    No. WA781UA #ABA

    Intel Centrino Wireless - N 1000 wifi card
    Running Windows 7 64-bit OS
    All the drivers are up to date, the computer is free of viruses, spyware, etc.

    Basically, I need to know if there is a model specific card Intel Centrino Wireless - N 1000 that came with this laptop that I need order. I've seen several different of these cards for sale online, but they have all the different numbers and I just need maybe a link or something to show me the exact replacement I need.

    Thank you very much for your time and help!

    Yes, you need this one

    https://www.Amazon.com/Intel-5100-512AN_HMW-wireless-572507-001/DP/B00O0GG1L2

    The maintenance manual does not list a Centrino Wireless - N 1000 card. You must not only the correct chip, but he must have a part number of HP. Probably your card has this number on it, on a label or on the label that the number of "SPS" and it will be 6 numbers and a dashboard and then three other number 001 usually.

    The 5100 card is dual-band 2.4 ghz and 5 ghz so is in fact a better map and will work.

    Post back with more questions.

  • This HD for 2nd HD Pro A200 PSAE7E Satatellite mounting kit

    I have a Sat "Pro A200 PSAE7E and want to add a 2nd HD to your laptop, but it came without a 2nd HD mounting kit.

    Can anyone advise on what kit, I need to buy?

    As a matter of interest, I tried to mount the current HD in the second port and he won't, so I think that the mount is different?

    Your help will be greatly appreciated.

    Thank you in advance,

    Kenny

    Are you sure that there is a SATA connector in the Bay of 2nd?
    Check this first.

    If you have a second SATA connector, you can get a kit of mounting an ASP (certified partner).
    You can search on Toshiba Europe site: http://eu.computers.toshiba-europe.com

  • FVS336GV2 19 "Rack Mount Kit - P/N: or SKU

    Hi all

    As indicated in the subject I am hunting the purchase of a mounting rack for our FVS336GV2 kit and could do with the Netgear part number to order if anyone can list please?

    The manual States on page 18 that it is part of the provided content then on page 22, the unit in the rack mounting mounting kit.

    http://www.downloads.NETGEAR.com/files/GDC/FVS336GV2/FVS336Gv2_RM_18DEC14.PDF

    However the Datasheet on the last page does not show as a part of the content provided...

    http://www.downloads.NETGEAR.com/files/GDC/datasheet/en/FVS336Gv2.PDF

    When I call netgear they keep telling me that the rack kit is p/n: 42010043-01.

    This kit is for the office series M4100 switch and will not agree to the FVS336Gv2.

    The M4100 DG12 is 328mm ~ 321mm width and the FVS336Gv2 is only 254mm wide.

    Even if the kit above mounting screw holes are the correct model to lay on the side of the FVS336Gv2 the ears would be too short to reach the edge of the rack mount amounts to mount even when.

    Kind regards

    Peter.

    Hi Peter_A,

    Welcome to the community.

    I regret to inform you that, it seems, there is just a mistake in the manual of the FVS336Gv2 so that it is not intended for rack design.

    Kind regards

    Rokhaya
    NETGEAR community team

  • How can I restore recovery d ' training on hp pavilion dv6-2155dx after format?

    How can I restore recovery d ' training on hp pavilion dv6-2155dx after format?

    Hello

    You can not restore

    It was photographed on your hard drive by HP during the fabrication of your machine and cannot be replaced

    Buy HP recovery disks instead

    read this:

    Contact HP and ask them to send you in vista recovery disks to reinstall the operating system back as it was when you bought it

    they do it for a nominal cost of $

    http://WWW8.HP.com/us/en/contact-HP/contact.html

  • Help me! I forgot the password of the dv6-2155dx bios.

    I have a hp dv6-2155dx. I forgot the bios password.

    Please give me unlock code for 68747528.

    Thank you very much.

    Hi guangri

    Come in:

    77625508

  • Pavilion DV6-2155DX: processor i5 - 580 M of Pavillion DV6 - 2155DX support?

    I would like to confirm if it is possible to upgrade the processor in DV6-2155dx to a core i5 - 580 M from the i3 - 330 M stock.  I read a post that claimed that the i5 - 580 M (with the I7 - 620 M & I7-640 M) was consistent, but the latest version of BIOS (copied below) notes indicate support was added "for the Intel I3 - 350, I5-520, I5-540, I7-620 K - O Stepping processors.  From what I can understand other references online, the i5 - 580 M is a K-0 Stepping processor, but does not appear explicitly as being supported by the BIOS updated.

    Could someone confirm if the DV6-2155DX with the latest BIOS could support the upgrade of the i5 - 580 M processor?

    Thank you!

    ------------------------------------------------

    Communicate details

    UMA = integrated so that you have UMA.

    There is no source information on upgrades processor as the maintenance manual. HP does not support or encourage the laptop processor upgrades after the point of sale for reasons that should be obvious. They would sell you rather a new laptop and there is no increase for HP in your opening of the casing of the laptop.

    An image of your motherboard, I can see that the processor is not welded on. Logically, there is no reason that a CPU that runs on a version of the same motherboard with the dedicated video would work also on them with onboard video. It is not always logical, however. I also see that your motherboard is not in the manual I posted. I made some of these updates and some like to think that I got a seat of the pants for her feeling and I'm going to go out on a limb and say the i5 - 580 M will probably work. No guarantees, but I'm confident about 80 percent.

    Indeed if you put your motherboard part in Partsurfer number, it lists all of the models in that it has been used and I see that it can actually accept an i7-720QM and I found one where he was running an i5 - 430 M.

    Models using your motherboard

    I was not going through each and every one, but if I could find one with the i5 - 580 M my confidence would go up to 100%.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • 2960 replacement rack mounting kit?

    Is it possible to get a mounting kit rack replacement for a 2960 48 port switch? I had a reading of textbooks but can't see a reference number specified. Part number asked (BT) is for the version 8 ports, which is not very useful.

    Thank you.

    This is the reference number:

    RCKMNT-1RU =.

    More info here:

    http://www.Cisco.com/en/us/docs/switches/LAN/catalyst2960/hardware/installation/guide/higinstl.html

    http://www.cablesandkits.com/Cisco-2960-series-catalyst-rack-mount-kit-p-198.html

    HTH

  • Pavilion dv6-2155dx portable: video pixels mode full screen

    Play any video on my laptop HP Pavilion dv6-2155dx does not change the resolution in full screen... and the pixels seem to be so visible if the video is interlaced.

    It runs Windows 7. It's a clean install of the previous week.

    Graphics driver is the last update and Device Manager shows not any unknown devices or pilot faces etc.

    Any help would be appreciated.

    Found that the 64-bit video rendering system codecs to play videos were different from those of a 32-bit system in some cases. Thus, the problem persisted. It has been solved now by optimal choice of codecs.

  • Wyse C90LEW mounting kit

    I have a question about Wyse C class Assembly kit. I know that's not VMware, but I think that people in this community must use it. From a previous post, one Member said that I could mount computer thinclient Wyse C90LEW on the rear flat fo monitored using Wyse VESA mounting kit. I can mount the monitor or a computer thinclient Wyse on the OTHER arm, but I do not see how to ride both. has a certain fact than before?

    Thank you

    On a dish moitors, the base of screen delivered do not always use the VESA mounting on the back of the monitor bracket, and if a thin client could be up there with a mounting kit.

    If you already use the VESA mounting either for the valid Group Office point (DELL monitors are usually like that) or to ANOTHER monitor arm, then you will need to locate the workstation also.

    In the past I saw them zip-tied on the arm articulated, etc. and even located on custom mounts that are attached by a medium sandwiched between the VESA mount and swing arm - but if a such adapter is available for your particular device or installation I don't know.

    Good luck.

    #Phil

  • PowerEdge Rack replacement mounting kit

    Hello

    I was wondering if there is a way to get the spare parts for rack mounting kits?

    We have servers where the kits were not used initially and now some parts disappeared.

    Is it possible to find spare parts?

    Thank you

    See you soon

    Bourne553,

    Yes, we can find the spare parts for you. Response with the serial number of your server to the e-mail address I will send you.

  • HP ENVY 17-j013cl: LCD including Kit screws hinge screws-Envy 17-j013cl

    Is it possible to point me in the right direction to get the screw in replacement for my Envy 17 - jo13cl so that I don't take no chance when I get my new hinges installed? (Received courtesy of Shaun, Manager of cases in an HP support) I looked in the manual of Maintenance HP Envy 17 and it just lists a number for a screw as 720260-001 kit, but it does not say whether or not it is all-inclusive. I saw screw on the line kits, but some say that they do not include the screws for the hinges of the LCD, which is what I most need. Thanks for any help anyone can offer.

    Gary Nordmeyer

    Hi @gnordmeyer2039,

    Thank you for your query.

    I understand that your case manager took provisions get screw replacement for your computer laptop 17-j013cl of envy and ask yourself if the screw kit includes hinges of the screen.  As befits a complete kit, I guess that it will contain these screws.  As you said the description does not specify what is exactly included.

    When I looked at the maintenance and service guide, I noticed that the hinges of the screen have a separate part number 720238-001.  Please note Chapter 3, page 3, section 28.  HP ENVY 17 Notebook PC HP ENVY TouchSmart m7 Notebook PC HP ENVY 17 Notebook computer Touchsmart Maintenance and Service of Guide.  You can communicate with your case manager to clarify the matter.

    Please keep me updated on the outcome.

    Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as you. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

    To show recognition for my efforts please click the Thumbs Up icon below.

  • Pavilion DV6 2155dx: upgrade HARD drive to SSD

    I want to upgrade my laptop Hp HDD to the SSD. Very successful on the 2 HP desktops. But not a great success on the laptop. Windows does not start with the installed SSD. Black screen with how to text of amendments, but no solution. Checking the BIOS it seems too basic and has no provision to select the correct setting. How can I upgrade the laptop to recognise and start of the SSD, as desktop computers.

    Problem solved. Maybe this helps someone else.

    For reference, the SSD HARD drive migration has been completed with Samsung software tools.

    Although a similar migration was very successful on 2 offices of HP prior as the PC starts fine, this time the laptop set to level did not boot from SSD.

    Based on the reviews elsewhere on the web, with the portable operating from the original HARD disk, I adjusted the BIOS boot sequence to boot from the internal CD-ROM. I was then already migrated SSD HARD drive. Then I started from a prior agreement prepared the repair Windows 7 Bootable disc - now I know why they are so very precious! - and started to repair startup disk said. After a few additional steps miners, he says the problem fixed and carried out traditional, clean startups.

    Also, I can confirm that the Pavilion DV6 works very well with a 250 GB SSD. Most good, this is a speedster. There is therefore no limitations to 160 GB the HP Document seems to suggest.

  • is there any wall, mounting kits available for the iq500 or iq800?

    as per the title of the topic...

    Laptop HP ENVY 17-j005tx, HP ENVY 27 - k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server tilt, HP MediaVault 2020, HP ENVY 120 AiO Printer

    Then there is this one for the IQ500 series...

    http://EzineArticles.com/?HP-TouchSmart-wall-mounting-VESA-mount-adapter-for-HP-Dx9000-and-IQ500-series-TouchSmart-PC&ID=886040

  • for HP dv6 laptop LCD has backlight, but does not display anything.

    I have a laptop HP dv6, WF536AV and cannot get a picture on the screen, but there backlight so power is on.  Hooked to an external computer monitor seems to be fine.

    nodebtman wrote:

    I bought in August 2010, so it is more guarantees by HP, but I bought it at Costco, and they offer the service under warranty for 2 years.

    If you have the 2 year warranty then take it to Costco.

    Best regards

    ERICO

Maybe you are looking for

  • Unable to print error: is not an ethernet driver

    Original title: Printer does not print Please help me I'm so aggravated. I have a Samsung laptop, RV520. I onstalled a HP Photosmart all-in-one wireless printer C4580, scanner, copier with the instalation disk. It wouldn't work so I had to go buy an

  • Windows could not search for new updates. Error 8024402f code. Fix available?

    Windows could not search for new updates. Found error 8024402f code. I tried everything, but the problem has not been resolved.  Vista service pack 2 build 6002. is any kind of fix available? I tried the fixit. It shows the Update component must be r

  • computer server crashed and neet to turn off use on another server

    We had a server crash and had to rebuild but now acrobat does not have one of the two existing servers, so need to disable the server crashed to use on one of those ongoing, how?

  • HOW to: Sort table of VC:HostSystems by name

    HelloFirst of all, I'm new to Javascript.I have the following javascript code, and I want to sort my table of parameter Listehotes by host name.I tried the array.sort(); function, but as it is not a list of host names and objects. The result is done

  • How much RAM do need me for 4 k video?

    I'm asking this here because Premiere Elements doesn't have it's own forum.What I have is a used Dell Precision T7400, with 1 x Xeon E5440 2.83 Ghz, 8 GB of RAM. 1 x 160 GB 10 k Raptor 1 x 1 TB 7200 RPMWhat I want to know is: Premiere Elements be abl