Similar Questions

• HP 15 r014tx: I needs to open the laptop to upgrade ram in hp 15 r014tx?

  I need to open the laptop to upgrade ram in r014tx 15 hp? If so, please share a video to even.

  @angn

  Yes, you will need to open it.

  Sorry, no video that I know.

  Your manual here.

  http://h10032.www1.HP.com/CTG/manual/c04409502

  Start on page 76.

  REO

• Problem on Windows after upgrading RAM

  I have 6 years, Alienware m11x R.2 running Windows 7 x 64 SP1. Since the ole ' computer is still alive and kickin. I thought I'd do a quick refresher on the RAM for an inexpensive upgrade.

  I'm not an expert but to build my own PC and was demolished and rebuilt this laptop particular (among others) several times. The upgrade of RAM has always been something that requires very little attention or other planning that by ensuring that you have compatible specifications.

  I upgraded the RAM this laptop came with a year after the purchase of a Kingston Hyper-X. www.newegg.com/.../Product.aspx

  I remember having no problem with the installation of this RAM and it was perfectly fine since then.

  A few weeks ago, I ordered the DDR3L RAM, after starting the computer difficulties, I realized the error, but also said that the RAM must remain compatible with 1.5V power outlets. But maybe it was a compatibility problem, so I returned it regularly DDR3 RAM, shown here. http://www.Newegg.com/product/product.aspx?item=N82E16820231582

  Outside the actual size of RAM I don't see any other difference with specifications.

  Here's the problem: when I install the new RAM I asked to do a startup repair. No matter if I select run repair or normally I get sent to windows startup. This repeatedly. When I re - install the old RAM is the same screen, but I'm able to start or I can choose to run the repair. (I did both.) This happens with DDR3 and DDR3L RAM. No difference.

  I have triple checked that the RAM is installed correctly and BIOS sees all the 16 gb.

  Advice and assistance is appreciated. Thank you.

  For M11x R2, 8G (2 X 4).

• Problems syncing notes app after upgrading to iOS 10

  Hi all

  I hear a lot of people having the same problem on the web.

  After upgrading my iPhone 6 s more and iPad Pro iPad 9.7 ", kept perfect notes that I saved in the Notes application (like my MBP / iMac too), while on my iPhone, I've known many sync problems and even lost notes and records.

  1. I tried to pass and on the synchronization of Notes in the iOS iCloud preferences, with a reboot between stocks. Nope. No synchronization, and when I turned on sync I lost almost all of the notes previously saved in my iPhone, so I now 15 notes instead of 175. This ONLY happens on my iPhone, while iPad / MBP / iMac yet.

  2 - I tried to create a new folder in my MBP or in my iMac, hoping to "stimulate" a new event to Resync through all my devices. Not for the iPhone, but synchronized on my iPad / MBP / iMac.

  3. today, I made a backup of my iPhone, reinstalled the iOS 10, then restored the backup.

  Nope.

  Any ideas, guys?

  Thank you

  Luca

  EDIT: actually sync problems seems to occur exclusively on the side of the iOS. This also includes the iPad. Fortunately, I didn't have the great idea to disable the synchronization of Notes in iCloud on my iPad, as I did on the iPhone.

  I'd lose certainly all currently stored notes in my iPad too.

• Problem of LTE connectivity after upgrade to iOS 10-SE

  Do not know if everyone knows this, but after upgrade to iOS 10 on my iPhone SE when I leave one area LTE and go to the services area or area No. less than LTE and re - enter a LTE area, I have no service. There is no service or reports 4g, but when I use an app, it says no network not connected. I tried all the usual stuff... Restored from backup, cleared cache, reset the network connections, did a hard reset, nothing works. The only thing that comes to LTE turns the phone then turn it back. All this experience? I have never had this issue before moving to iOS 10.

  I think you have the same problem described here:

  After briefly losing service, iPhone will fail to connect to the cellular network until you restart

• Connection problems wireless Broadcom 1704 after upgrade to windows 10

  Connectivity problems after upgrade to windows 10 intermittent wireless;  Have an Inspiron 5748 with adapter Broadcom 1704.  Driver is up to date: 7.35.295.0.  Diagnostic shows no problem with the unit.  Will be generally connect to the network, but the connection is deleted intermittently.  Troubleshooting to solve using leads to restore connectivity, but it will then drop again intermittently.  Never experienced problems before windows upgrade 10.

  steveshuff,

  Here are a few parameters to change on your adapter wireless for better performance.

  Turn on and off then on all devices on the network

  1. Turn off the power to the broadband modem and let the modem broadband disconnected for at least 3 minutes.
  2. Shut down all computers that are connected to the network.
  3. Remove power from the wireless router.
  4. Check that a network cable is connected the modem to broadband in the Internet or the wireless router's WAN port.
  5. Check that no series cables or USB are connected to the Modem on broadband.
  6. Connect the power supply to the modem broadband. Wait at least 2 minutes for the Broadband Modem to initialize.
     (If the Modem does not provide Internet connection successfully, unplug the Modem. Wait at least 5 minutes, then plug the Modem back.)
  7. Connect the power supply to the wireless router. Wait at least 2 minutes for the wireless router to initialize.
  8. Turn on the computer and try to connect to the Internet.

  Difficulty of wireless network connections

  Turn off airplane Mode

  For Dell Wireless adapters:

  1. In the Search box, type Device Manager.
  2. Press or click (Control Panel) Device Manager.
  3. In the Device Manager window, click on the sign of the arrow next to network adapters.
  4. Double click or double-click the Référence Dell Wireless WLAN Card.
  5. Click the Advanced tab.
     Note: These options are not available according to the installed wireless adapter.
  6. In the property: box highlight AP Compatibility Mode, select broader compatibility under value: from the menu drop-down.
  7. In the property: box, highlight the Minimum energy consumption, select disabled under value: from the menu drop down.
  8. Click OK.

  For me, to help troubleshoot, please click on my DELL-Jesse L and send me a private Message with the number of Service Dell and your Dell order number.

• Problem with the rules after upgrade of the VM in foglight cartridge

  Hello

  There is a small problem with the rules after that I updated the VM cartridge level.

  In the default rules, I changed a few settings so that they will act as I need.

  However, each time I upgrade VM cartridge my rules are off and marked as backup.

  The question is: is there a way to upgrade the cartridge and keep my active rules after upgrading?

  Best regards

  Victor

  This is the normal behavior according to this KB article

  https://support.quest.com/SolutionDetail.aspx?ID=SOL105872&PR=Foglight

  105872 knowledge article

   
  • return

  • Title

    Backup rules fill in the dashboard management rule after Foglight upgraded

  • Description

    After that an upgrade of Foglight was conducted, several backup rules are created for rules that have been published before the upgrade. For example:

    Cluster VMW IO network
    Cluster VMW IO network (backup)

  • Resolution

    During the upgrade procedure, the FMS has detected that some of the original rules have been changed in some way. It copies the rules previously upgraded in backups, before trying to merge the contents of the update rule in the former.

    Assuming that the FMS works as expected, the rules of backup can be deleted. However, it is best to confirm this in the respect of the rules first before making deletions.

    When editing rules, particularly rules OOTB (out of the box), it is recommended to copy the original rule, disable the original rule and edit the copied rule. This should reduce the risk of the problem described in this Article.

  Golan

• Problem with desktop/taskbar after upgrading Fusion 4 to 6 - Windows 7 VM

  I got a few problems after upgrading to Fusion 4 to 6 with my Win 7 x 64 bit VM Fusion. I use a Mac Pro with the Mavericks. While I managed to resolve most of the issues with a manual installation of the VMWare Tools and reconstruction/reactivate a certain number of broken programs, there is suddenly a new which is serious enough. My office is not displayed, nor is my bar of the shortcut icons for the launch of the program tasks. I can access my desktop to the user manually folder and all the "stuff" is there. " If I run a program from the icon appears in the taskbar, but it cannot be pinned. When I access more nothing, I get this popup (see image). I'm sure that's the issue. Anyond can suggest a solution, please?

  Hello

  The network error is gone I hope?

  You have to set up folders mirrored under sharing with OS X? (Menu-> Virtual Machine-> settings-> sharing-> mirrored folders). If you use mirrored folders there, then what happens if you turn off this feature to test and see?

  I don't use this feature myself, but imagine that allowing a case mirrored for Office could eventually hide something on the side of windows.

  --

  Wil

• Problem with the smilies after upgrade to 7.23.0.4

  After the upgrade to 7.23.0.4 new Skype smileys (as (bhangra), (rabbit), (red) etc.) are not displayed in cats but only the words in brackets instead of them.

  Please, continue to release new versions with bugs!

  After upgrade to 7.23.0.105 all the smileys are displayed well.

  Even without disconnection/connection.

  Thank you!

• Problem with PCI-6704 after upgrade

  I recently upgraded from labview 7.1 to 8.6, at the same time I've upgraded to the latest version of the driver NOR-DAQmx, MAX and the existing drivers (7.4.4). After upgrading my PCI-6704 Board has stopped working. When I try to run the test panels I get a message "the device is not the test. Do you want to continue? "If I click on Yes, the test Panel opens and I get the message error in 10461. I tried to reinstall both daqmx drivers existing. I tried to uninstall both drivers and remove cards, restarting the computer, and then reinstall the new. I tried to install only the existing drivers and I get the same error. The pilots reset has no effect. I also tried switching PCI slots. I have a card PCI-MIO-16-1 and it works very well, and it works in a pci slot. Is there anything else I can try?

  I uninstalled the NOR-DAQ traditional 7.4.4 and installed instead of NOR-traditional DAQ 7.1 and everything works well again. Apparently there is something in the 7.4.4 update that did not like the PCI-6704.

• Satellite A660 - 10 X - no boot after upgrading RAM 8 GB, but 4 GB + 2 GB only

  Hello

  Today I bought two sticks of Kingston 4 GB DDR3 1066 MHz CL7 and I'm trying to replace my 2 GB ones, but something is wrong.

  If I put two sticks of 4 GB laptop does not start. I have the latest version of the BIOS (1.80). I have restored the default settings after upgrade.

  But it's quite strange, because if I put a strip of 4 GB and a 2 GB stick system starts and everything is fine (with memtest86 + too). But there is still one thing: 4 GB stick should be rolled in the dock before, above second, 2 GB module. If I reverse cell phone memory will not start again.

  Is - everyone knows how to solve my problem? Is this a BIOS problem? BIOS version which A660 takes in charge the amount of 8 GB of RAM with no problems? I can downgrade from the BIOS, because I don't know if Toshiba help update.

  Thanks in advance.

  Is this exact module the same 4 GB RAM listed on THIS page?

• Re: Smoker L30-10 X PSL33E does not start after upgrading RAM

  Hello

  I have a problem with my laptop.
  It has 1024 MB of RAM (2 x 512), but it wasn't enough, so I decided to update to 2048 MB (2 x 1024).

  I bought two modules and my computer does not start after changing them.
  It was only a screen black (same BIOS has not started). I tried another combination of installation of memory modules RAM.
  2 x 1024 - did not work
  1 x 1024 - did not work
  1 x 1024 + 1 x 512 - working but not properly.

  BIOS find that I only 896 MB (1024-128 for the video card)
  I said OK. Let's see what will show windows. He was also 896 MB.
  I launched CPU - Z and it shows that the total size of memory is 1536 MB (medium detect both modules).
  I found that CPU - Z detect 1 module 1 024 MB and 512 MB secondary, but the BIOS detect only 1024 MB 1536. How is that possible?

  I have fought, is that my BIOS is old, then I update the toshiba Web site form most recent version, but the problem persists.
  Please someboy help me and tell what to do.

  PS. the Modules are new and work correctly.
  They have been tested.

  Hello

  Have you used two identical RAM modules?

  What kind of modules did you use?

  In my view, that the problem is related to the new, inserted modules.
  There must be something wrong with the modules or modules are not completely compatible if the laptop can not boot after installation.

  According to a few pages of the book handles the DDR2 533 MHz (PC2-4200) 200-PIN SODIMM modules.

  Did you use these modules?

• HP all-in - One PC 19-2113w 19: white/black screen after upgrading RAM

  Hello

  So I have upgraded RAM using 2 x 4 GB SODIMM DDR3 Corsair 1600 Mhz, after installing the PC boots but screen is white/black

  steps to follow:

  1. I tried with 1 socket by using only a RAM, screen black

  2. I tried with 2 socket using RAM only one with the same RAM step 1, screen black

  3. I tried step 1 and 2 using the other RAM, screen black

  now here it gets interesting

  4 tried 1 socket using Original/factory RAM, screen black

  5 tried 2 socket using Original/factory RAM, screen black

  6. tried without any RAM at all, looks like a lack of RAM, screen black

  Now, to each measure adopted, I must say that the screen sound not only not showing things, but its totally black as it does at all, until the system starts normally. !

  Is it Possible the upgrade of RAM affect the screen? or maybe when I was replacing the RAM I hit some conecting by cable to screen or something?

  HP 19 all-in-ONE PC

  Product No.G4B06AA #ABA

  Model n ° 19-2113w

  10 64-bit Windows

  Update

  Removed the battery and hold the power for 30 sec button (BIOS reset if I'm not mistaken?) now it works with the orginal of RAM so I guess my new RAM that's the problem!

• Why Windows Aero does not work after upgrade RAM?

  After that I recently updated my computer desk with 2 new modules 1 GB DDR PC3200 400 mhz 184pin RAM

  PROBLEMS:
  * Windows Aero stopped working.
  * Windows recognizes only 3.5 GB of RAM on 4.
  * Windows Experience Index will not refresh the WEI Score.
  Any help with this?
  I'm back to the old RAM modules and all is well, but whenever I update the last two RAM modules, these errors occur.
  
  MY RIG:
  OS: Windows 7 Ultimate.
  SR1830NX Compaq
  Max supported RAM: 4 GB PC3200 400 Mhz 184pin DDR (4 Slots of 1 GB each)
  Configuration of the RAM before upgrading (physical)
  SLOT 1: 1 GB
  SLOT 2: 1 GB
  SLOT 3: 512 MB
  SLOT 4: 512 MB
  (although she had 3 GB installed, only 2.5 were recognized).
  Configuration of the RAM after upgrading (physical)
  Slots 1-4: 1 GB each
  Configuration of the BIOS:
  Slot SCHEDULES 1,2 & 4: 1 GB in each slot
  SLOT 3: 512 MB (even if it has 1 GB installed in this slot)

  You seem to have a hardware failure with slot 3. See if there is an update to the BIOS of your card mother, but don't hold your breath. There may not be one and he will probably not correct the problem if there is.

  There is always to be small amount of RAM allocated to the system. Integrated video will be stick like a leech some as well as the network interface card. It's normal, regardless of the version of the installed operating system bit...

• How upgrade to 64 bit Win 7 after upgrade Ram 6 GB on 3250br Pavilion DM1?

  I m going to upgrade 6 GB memory on my Pavilion DM1 3250br. Although windows indicate it is 64-bit capable windows anytime update installed 32-bit (because it has less than 2 GB available).

  1. How should you proceed to upgrade to 64-bit after upgrade memory? I don't have a system disk, only the suplyed key home premium by HP.

  2 HP has 64-bit for all devices drivers? They are in D: recovery drive or I´ll need to download the upgrade?

  3. any information you want to give.

  Best regards

  Eduardo

  Hi, Eduardo:

  You can try it.

  I know it works if you have a retail upgrade key which means that it is good for 32 or 64 bit.

  I don't know an ISO file that you get off the internet is an OEM file.

  If this is the case, it will not work. If this isn't the case, I doubt it will be.

  I have dealt only with the installations of Windows 7 using OEM disks or retail upgrade.

  Basically, the key that you use must be the same as the installation disc.

  OEM disc / ISO good with the key on the bottom of your portable forest 32 or 64 OEM.

  Plenty of retail disc / ISO only good with the full commercial product key, you get the box or the e-mail sent to you - 32 or 64 bit.

  The retail upgrade disc / ISO only good with the retail upgrade key, you get in the box or the e-mail sent to you - 32 or 64-bit.

  Upgrade Express disc / ISO only good with the upgrade retail or upgrade Express key - 32 or 64-bit if you have a disk.

  I used a disk of 64 bit Vista Business anytime upgrade to upgrade Vista Home Premium 64 bit update, and I was able to use the key from Vista Business 32 bit provided with the 32-bit disk (I had a 32-bit Vista Business retail box update but they come only with discs of 32 bits at the time and you had to order a CD of) 64-bit and pay $10. You can't even not the disks in 64-bit vista to MS.

  Hope this helps,

  Paul

  Paul