DV6 - 6163cl: change of hard disk for laptop ide (ata) to Sata

Similar Questions

• Re: Satellite Pro A40 - can I change the HARD disk or the same model?

  Hi Forum,

  do I have to wait for safe trouble by changing the hard disk between the following laptops:

  old or damaged laptop:
  SPA40 model PSA45E - 0013T - number GR
  Series No. 34127882 H

  new/own laptop
  SPA40 PSA45E-001VM-GR model number
  Series N0.34117607H

  Thanks in advance for your advice

  Concerning

  You can do it. No problem at all. Hard drives are not specific model of laptop parts and with hard drives is important compatibility.
  On the new laptop, which you can use different hard drives. Important is that use you compatible HARD drive.

  Just do it. After Exchange of HARD drive install Os again and everything will be OK.

• Cannot change the HARD disk parameters in the Bios on Satellite A200

  I can't change the hard disk parameters in the bios for my satellite A200-1The
  This bios does not support changing the parameters of the hard disk for example SATA to IDE?
  BIOS version is: 5.6

  AFAIK in BOS advanced settings you can change mode SATA controller only. You can use the AHCI mode or compatibility.

  I put t understand why do you think you can use IDE mode. What you want to do exactly?

• new hard drive for laptop computer tried to install windows XP

  Just fitted new hard drive for laptop computer tried to install windows XP, continues by saying can not find any hard disk. any help would be appreciated

  Hi JohnJelf,

  ·         What is the brand and model of the laptop?

  ·         What is the full error message?

  ·         The new hard drive detected in BIOS?

  I suggest you to contact the manufacturer of the laptop computer for more help and information.

• Pavilion p100dx: need to HARD disk for my pavilion p100dx configuration

  Hello team,

  Recently my hard drive of the laptop broke and now I need to replace my hard drive P100DX Pavilion.

  To do this, I want to know the configuration of HARD disk as

  1. 2.5 or 3.5
  2. What is SATA or SATA-no?
  3. SATA is compatible for it?
  4. What is the size of the HARD drive that needs to be? -height, length and width.
  5. Seagate HARD drive would be compatible.
  6. pointers for the HARD drive to buy.

  Thanks in advance.

  Hello

  It's a laptop HP Pavilion 15-p100dx ?

  http://support.HP.com/au-en/document/c04463224

  If Yes, then

  1. it uses standard 2.5 "HDD.

  2. it is a SATA HDD,

  3 SATA III (or 3) and SATA II (or 2) is compatible.

  4. all standard HDD laptops would use the same width and length, thickness (hright) can be varry slightly, but your laptop supports 7 mm or 9.5 mm. Better use 9.5 mm because you don't need a frame fill to increase his height.

  5. Yes, HP doesn't produce HARD drives for laptops, it uses Seagate, Toshiba and a few other brands.

  6. you can buy in any computer store BestBuy or Amazon, Newegg...

  Kind regards.

• I change my hard disk 500 GB, he had a particion front and right is now read 300gh, how do I retrieve the disc?

  I tried to format it, but the phone told me I don't have enough authority.

  Hello

  ·         What is the brand and model of hard drive?

  ·         Internal or external HDD that you use?

  Method 1:

  You can try to fix this by checking a disk or disks to find errors.

  I suggest to follow the steps outlined in the article below and check if it helps to solve the problem:

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Method 2:

  I recommend you change the drive letter for the drive and check if it solves the problem.

  a. Click Start on the taskbar, and then right click on my computer on the desktop or in the start menu then click on manage.

  b. under computer management, click Disk Management.

  c. in the list of drives in the right pane, right click on the removable device and then click on change drive letter and paths.

  d. click on edit and in the drop-down list box, specify a drive letter for the removable device, choosing one that is not assigned to the mapped network drives.

  e. click OK, and then click OK again. To assign a drive letter if it has not already received, click Add, click the letter you want to use, and then click OK.

  Method 3:

  You can also check out the article below and check if it helps:

  Formatting disks and drives

  http://Windows.Microsoft.com/en-us/Windows-Vista/formatting-disks-and-drives

  Note: Formatting erases all existing files on a hard drive. If you format a hard drive with files it contains, the files will be deleted. Make sure that you back up all your important data.

  Thank you and best regards,

• Change of hard disk: System update will work?

  I consider changing my 7200 RPM HD with a new Intel Solid - State Drive 520 series 180 GB. How this will affect the use of the system to update? He will be able to detect and work with my new hardware, or it will stop working?

  Currently I left 725 days my Lenovo warranty. Change of hard disk would probably void the warranty.

  PC: ThinkPad X 1 (1294-2PG)
  5-2520M (2.50GHz), 4 GB RAM, 320 GB HD 7200 RPM, LCD 13.3 in 1366 x 768, Intel 802.11agn wireless, WWAN, Bluetooth, Intel HD graphics card, 1 Gb Ethernet, Ultranav, Secure Chip

  Hello.

  (1) you should have no problem with the update of the system after the upgrade of your player.

  (2) change the Player won't empty your warranty as long as you don't cause damage by improper installation.

  the player is called a "self-service CRU" (CRUS by). If you look at the hardware maintenance manual pg98 (http://support.lenovo.com/en_US/downloads/detail.page?DocID=UM006394), you will see that the disk is not #5 in the exploded view. a page to the bottom, you will see a single * in the RAW Id column for the items in the list #5. Scroll to pg97 and you will see the definition of a "CRU" self-service ".

  HTH a little.

• I'm using Time Machine (1 TB), works very well, but because full starting to delete previous backups. Can I add another (LaCie 1 TB) HARD disk for backups? If so, how to proceed. Thank you!

  I'm using Time Machine (1 TB), works very well, but because full starting to delete previous backups. Can I add another (LaCie 1 TB) HARD disk for backups? If so, how to proceed. Thank you!

  You can add another drive to accept backups Time Machine... assuming it is correctly formatted for Mac to Mac OS extended (journaled), but things are not exactly "continue."

  You have not indicated if you intend to add the player to the USB port on the Time Capsule, or connect directly to your computer using USB or FireWire connections. Or the other method works, with the option to connect directly to the computer being the faster connection.

  Once the disc is added, you would go in Time Machine preferences (click the "clock" at the top of the screen on your Mac) to add the disk for Time Machine backups and delete the old Time Capsule disk, since backups will go is no longer this destination.

  Since you have a new drive, Time Machine will do a new full backup of your Mac and then go forward with incremental backups.

• new hard drive for laptop

  I have a laptop dv7-3140el and HD samsung HM641JI 640GB 2.5 "SATA 5400 RPM (to replace car failure). To buy a new hard drive I have to take the same or I can take 7200 RPM instead of 5400? What technical specifications should I look for when buying a hard drive for computer laptop dv7-3140el? I wouldn't make a bad purchase!

  Sorry for my bad English

  Hello

  Here are a few points to note when replacing your HARD drive:

  You are not limited to any particular drive manufacturer.

  The speed of rotation of the disc can be 5400 RPM or 7200 RPM

  The new drive HARD should be at least the same capacity (or slightly more is okay) as the original drive - mounting a drive smaller than the original often causes risks with recovery media.

  The player at the link below is an example of one that would be perfect for your laptop.

  750 GB hard drive for laptop.

  If necessary, the procedure to replace the hard drive begins on Page 47 of your maintenance & Service Guide.

  Kind regards

  DP - K

• How to open my R5-571-59DC to change the hard disk

  Can someone explain how to open my r5 - 571 to change the hard drive for an SSD and increase the ram? Thanks much for any help.

  Course, the R series is similar, my R3 has twelve screws at the back. Once removed, the back is pried off. Doesn't have a lot of strength. Connectors must back spilled up to remove. The cables are delicate so always be sweet.

  PS there is a microphone (interlock) under one of the screws two Center. Machine does not except so depressed, so make sure that screws are tight.

• What I would do is change the hard drives for some more great and maybe change the CPU. Is it possible to re - install the generator in system because I'm not changing the motherboard?

  I'm running an integrator system Windows 7 64 bit on an older system. What I would do is change the hard drives for some more great and maybe change the CPU. Is it possible to re - install the generator in system because I'm not changing the motherboard?

  Original title: Windows 7 OEM System Builder

  I'm running an integrator system Windows 7 64 bit on an older system. What I would do is change the hard drives for some more great and maybe change the CPU. Is it possible to re - install the generator in system because I'm not changing the motherboard?

  Yes, you can reinstall Windows 7 OEM System Builder License on the new hard drive with the new processor.

  It will not be a problem in this case, since you don't "move" installation, you are doing a new installation. The less it will take is activation of the phone, as you change the hard drive:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Workstation 8 Shared VMs on different hard disks for autostart

  Hi people:

  Is anyway to take advantage of the feature work station 8 sharing VMs autostart with the start-up of the host OS, but have several virtual machines on different hard drives? Ideally, I would like to have VMs on separate hard disks for performance problems. \

  I really don't want to go on the road of ESXi right now. Is it possible to "autostart" other than via the shared "VMs" component of VMware workstation VMs 8? I think this would be a trivial feature to add to the workstation 8 and would make great useful for young kids like me.

  Best regards, Dave Melnyk

  MKLINK /j

  must be done as an administrator

• Increase the capacity of the hard disk for VM

  Hello

  I use ESX 4.0 with vSphere 4.0.

  When there is no snapshots more I would like to increase the capacity of the hard disk of the virtual machine in the menu to change settings / Hard disk. There is MS Windows Srv 2008 R2 64-bit installed.

  What is the right way to do it? Operating system, there is no problem with this increased disc? Primary partition will automatically increase as or what I have to do it myself later?

  There should not be problems with the guest operating system when you increase the size of the virtual disk. After the increase in size in the settings of the virtual machine, you need to resize the NTFS partition in the VM Windows 2008 disk management.

  André

• Pavilion Entertainment PC dv6: need a new hard drive for the dv6-1230us

  My question is about the HP Pavilion Entertainment dv6-1230us PC. Recently, it was abandoned, and since then it has been giving me the following message if poster every time it starts.

  Not found boot device
  
  Please install an operating system on your hard drive.
  
  Hard Drisk (3F0)
  
  F2 System Diagnostics
  
  "For more information, please visit: www.hp.com/go/techcenter/startup"
  
  I know it's important to run the hard drive test, but when I run the diagnostics of the system for the Test drive, it says:
  "HDD test failed.
  There is no hard drive.

  I was also on the proposed site and even after "reset my BIOS to default", it recommends running the hard drive test, which does not simply because it has not really helped me the "there is no hard drive. There was a YouTube video that I came across thus suggested pulling the hard drive and diconnecting and reconnect to correct the error in this case that the son is detached, but that no longer works.

  SO, I don't know if there is anything more that I can do, I guess that the hard drive is super dead.

  It comes with a Seagate ATA hard drive. I was wondering if I could replace it with a SATA hard drive or should it be an ATA? (Even has the material capacity to support a SATA drive?)

  Also, it is even useful to replace the hard drive? Should I get a new laptop instead? This laptop is used mainly for just browsing online and checking emails.

  Any help is appreciated, thanks.

  Yes, the hard drive is so dead, that he not yet register as a hard drive. The dv6-1000 series certainly uses SATA, not ATA drives so I'm not sure of what you see. You can replace it with any drive SATA 2.5 inch width 9.5 mm thick.

  Watch this video between: 53 and: 59 and see that it's a SATA drive. If yours is different, so you have confused with your model.

  https://www.YouTube.com/watch?v=QQx7PlIXFuE

  Hard disks are a small fraction of the cost of a laptop and if your what it takes to, I would say that to replace the hard drive rather than buy a new one.

  It is an excellent drive at a great price:

  http://www.Newegg.com/product/product.aspx?item=N82E16822236563

  You have recovery discs? You run Windows 7? Post back if you need help more to restore system software.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Restores possible OneKey Rescue button on change of hard disk physical?

  I am a very new user of lenovo and recently bought an Ideapad Y460.

  The default hard drive is 500 GB with a speed of 5400 RPM.

  I wanted to change my hard drive to an SSD hard to increase performance.

  Before doing so, I created a set of recovery plant (3 DVDs) discs using the pre-installed OneKey Rescue System.

  I am aware that for the button OneKey Rescue work, the system must have a separate with the original disk image partition.

  My question is that if I install a new hard drive, the recovery of the DVD discs recover the original function of my laptop, returns to its new factory-installed state?

  The OneKey recovery will work properly?

  The recovery disks sutomatically will make the hidden partition, the C and the disks on my new SSD?

  Thanks for your time and any help will be greatly appreciated.

  replacing hard drive with rpm higher can help you.

  (consider about upgrading ram, too)

  http://Forum.Lenovo.com/T5/IdeaPad-Y-U-B-V-and-Z-series/disk-partioning-and-OneKey-recovery-feature/...

  (please, hit that "accept as solution" response if any message helped you to solve)