DV6-6b51ea: the problematic driver, Universal serial bus installation does not
Hi, is it possible to also help me find the right drivers?
This is the id of the hardware:
Universal Serial Bus (usb) controller:
PCI\VEN_1033 & DEV_0194 & SUBSYS_1658103C & REV_04
PCI\VEN_1033 & DEV_0194 & SUBSYS_1658103C
PCI\VEN_1033 & DEV_0194 & CC_0C0330
PCI\VEN_1033 & DEV_0194 & CC_0C03
Unknown device:
ACPI\HPQ0004
* HPQ0004
Unknown device:
USB\VID_138A & PID_0018 & REV_0078
USB\VID_138A & PID_0018
Also, I installed a new windows 7 64 - bit, I hardly did to install allmost all the drivers from this link:
Most of the pilots could not be installed, telling me that I am suggesting not all system requirements to install this specific driver...
I'm strugeling with my Amd Radeon graphics card install also, in device manager says: Windows has stopped this device because it has reported problems. (Code 43).
I went to the Amd Web site, I download from there is version 14.501.1003.0 for Amd Radeon HD series 7400 M (same dough I remember that I have a series of 6xxxm on my laptop). It didn't matter how hard I tried to install the correct driver, only this one worked...
A year and a half a go on my model laptop that it's really simple to get all the correct drivers drivers hp supports, but now... There are a lot of drivers than mach doesen't with my machine.
my product is: QG799EA #ABU, model: dv6-6b51ea with core i5, 6 GB of ram (if this is important).
Believe me, I've installed windows on a large number of PCs and laptops, but as mine... ever... .to fight so hard to do things... 6 hours...
Well, I hope you can help me with this. Sorry that I have several questions to a post...
Hello:
You need these drivers for devices:
PCI\VEN_1033 & DEV_0194:
ACPI\HPQ0004:
USB\VID_138A & PID_0018 & REV_0078:
The only graphics driver that you can install is this one. Do NOT install the stand-alone Intel graphics driver.
This driver installs the drivers for the AMD and Intel graphics processors switchable.
Tags: Notebooks
Similar Questions
-
I have a Toshiba Satellite A105-S361 and I get this message: Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41)
Hello
I suggest to refer to this link, scroll down to error code 41 and follow the steps and check if that helps:
http://support.Microsoft.com/kb/310123
It will be useful.
-
When I try to install adobe photoshop 13 on my computer it comes up with the error message error code "this installer does not setup on a windows 64-bit operating system support" 6. How to I recify this? TIA
You can try to download the 64-bit version. You can download the demo version of the software through the page linked below and then use your current serial number to activate it.
Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html
-
I just reinstalled windows and I'm looking for the missing driver for my Pavilion 15, the hardware for the missing driver ID is:
PCI\VEN_8086 & DEV_1E31 & SUBSYS_196F103C & REV_04
PCI\VEN_8086 & DEV_1E31 & SUBSYS_196F103C
PCI\VEN_8086 & DEV_1E31 & CC_0C0330
PCI\VEN_8086 & DEV_1E31 & CC_0C03and it's for (USB) Universal Serial Bus controller, I tried to install the Intel USB 3.0 Host controller driver, but will not install and don't know if it's the correct driver. Would be grateful if someone could lead me to the correct driver.
Thank you.
Hello:
Download, unzip and run the file setup.exe from the link below...
-
HP laptop - 15-ac034nb: Universal Serial Controller host does not
Hi, I had a HP laptop - 15-ac034nb energy Starr, but my USB port does not. I installed all the drivers from the site bot does do not as well. What can I do? On the status of the USB bus controller, it's like this: the drivers for this device are not installed. I think that it is possible to install drivers hurt, can you give me the right drivers?
I'm stupid, I was confused link sorry
installs:
https://Downloadcenter.Intel.com/download/24896/USB-3-0-Intel-USB-3-0-driver-for-Intel-NUC
-
How can I make a copy of the "Windows Calendar" - my 'save Windows' installation does not work!
I would like to 'save' the Windows Calendar and save it to a Kingston USB device, or something similar. I seem to be unable to locate the file via the 'computer' tab - the only file I could find/copy was the "quick start up.
Perhaps Windows does not allow me to do so, but if there is a way I would like to hear that I am very dependent on the use of every day of the calendar.
Hi Wayne N.,.
1. What is the exact error you get when you try to make the backup of windows?
2. don't you make changes to the computer before the show?The first thing you want to do is to ensure you have all of your known appointments, meetings and functions is entered in the calendar.
a. click on file in the windows calendar.
b. click on export. (This will take you to the export dialog box.)
c. choose a location to store the file *. ICS. (The ICS standard is a standard text developed by Apple to facilitate importation of text data for the calendar).
Note: Save the file to removable media such as a CD or a Flash drive and bring it to another computer to import other utilities of calendar. Or you can also save it on the same computer for upload to the calendar application.Now we can import this file into several types of calendar applications such as Yahoo or Google Calendar online. For example, I'll show import you backups window "in MSN Calendar.
Go to your MSN Calendar, and click the Add drop-down list and import calendar. Enter the location of the backup schedule, and then click Import.
NOTE: another thing to remember is the file ICS is a calendar snapshot. This means that all changes will not automatically be saved in the file. If you rely on your calendar strongly make sure to save regularly. -
It is an old computer xp
Hello
I suggest you to follow these steps and check if they help.
a. Click Start, open Control Panel.
b. open Security Center.
c. click on automatic updates.
d. on the screen which shows developed for download, but let me choose when it is installed.
e. press on apply or OK and exit.It is perhaps the only way to prevent this being installed.
-
Drivers HP Pavilion dv6-1149wm Bus SM of missing controller / universal serial bus
HP Pavilion dv6-1149wm SM Bus controller / missing universal serial bus drivers. I downloaded all the drivers from the site, however, I still can't get my USB ports work.
Hello:
For some reason, HP does not only provide the driver of portable computers for all its AMD based AMD chipset on any page of support and driver.
You must install the amd chipset driver from the link below, the first file listed. Who will install the drivers for SM Bus and USB 3.0.
http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2
-
Hello, after buying this model and the installation of new copy of win 7 x 64 im Device Manager, I have a yellow exclamation mark on universal serial bus controller driver (when I connect my optical mouse red light is flaashing, but nothing happens, it is the same with all devices on all three usb ports usb) ž
hardware ID
PCI\VEN_8086 & DEV_22B5 & SUBSYS_81F1103C & REV_35
PCI\VEN_8086 & DEV_22B5 & SUBSYS_81F1103C
PCI\VEN_8086 & DEV_22B5 & CC_0C0330
PCI\VEN_8086 & DEV_22B5 & CC_0C03Thanks in advance
Hello:
Download, unzip and run the file setup.exe from the link below...
-
Aspire driver E5-551 Windows 7 Universal Serial Bus (USB)
I installed Windows 7 in Acer Aspire E5 - 551G, but there doesn't seem to be an operating system that is supported by ACER, because on the page to download ACER drivers, drivers are available only for Windows 8.1
I found manually and installed successfully the various drivers for Windows 7, but I'm not able to find the appropriate driver for the "pilot of Serial Bus universal (USB)", and I guess that's the reason for a USB connection that does not work.
Anyone know which is the correct driver?
Thank you
the 2 missing IDs are in the drivers VGA AMD chipset/USB (), try this:
-
The Manager of devices-other devices-Universal Serial Bus
I have a laptop HP Envy dv7 - 7227cl. It came with Windows 8. I formatted the HARD drive and put Windows 7 Ultimate on it. I went on HP website for my model and put all drivers to this topic. I got everything to work, except the 3 USB 3.0 ports. The USB 2.0 port works fine and when I plug a USB key in it recognizes it and its proper use. When I plug a USB key into one of the USB 3.0 ports 3 nothing happens. No light on the thumb and no bubble of recognition in Windows.
In Device Manager it reads other devices under the two headings. They all have both read (USB) Universal Serial Bus controller. I tried right click and let Windows search for a driver and it says that it cannot find a. I am at a loss here. I searched and searched for a solution and don't know what to do. Any help or advice would be appreciated.Thank youHello
You have reached the right forum. I've surely you will help find a solution on the issue.
You see an exclamation point on the control of USB device drivers in Device Manager?
You can check if you can provide us with the error message for the devices in the Device Manager. Please refer to the below steps.
a. open the Device Manager by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
b. in the device, Manager find device , then right click on the name of the device and go to properties.
c. now on the general tab, check the status of the device. Let us know the status of the device. Also you can inform an error code with the State.
Drivers and download
As the computer came pre-installed with Windows 8, I suggest you to contact HP support to obtain the driver suitable for Windows 7.
Reference:
http://WWW8.HP.com/us/en/support-drivers.html
Hope this information helps. Please reply back with the State so that we can help you.
-
I need driver for Universal Serial Bus Controller Win - 7 64 bit for HP Pavilion g6 - 2164ca Notebook PC
Name of product: notebook PC HP Pavilion g6 - 2164ca
Product number: B5A06UA
Serial number: [Moderator published serial number]
Hardware ID:
PCI\VEN_1022 & DEV_7812 & SUBSYS_1849103C & REV_03
PCI\VEN_1022 & DEV_7812 & SUBSYS_1849103C
PCI\VEN_1022 & DEV_7812 & CC_0C0330
PCI\VEN_1022 & DEV_7812 & CC_0C03Hello:
Download and install both of these drivers and restart.
-
How can I download the drivers for the Universal Serial Bus controller?
After many restarts and troubleshooting tests, I had to go into Device Manager and uninstall some drivers under USB bus controllers because I was faced with a problem where my usb ports were not recognizing my mobile. I can't find drivers for usb on hp website?
HI @sazz1295 ,
Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP laptop and the USB doesn't work does not correctly. Here is a link to solve the USB connections.
I would like to uninstall all listed in the universal serial bus controllers list.
Please note remove any and all USB devices and remove the memory card in the slot of the card reader. Disconnect all non-essential devices before you uninstall the controller Universal serial bus.
Restart your computer, and then insert the USB device.
Here is a link to the HP Support Assistant. Simply download and run the application and it will help with the software and drivers on your system.
I hope this helps.
Thank you.
-
I installed win7 64 bit in 15 ac122tu laptop, but now I see yellow exclamtion on network controller, Universal Serial bus Controller SM bus controller in Device Manager.
I am not able to connect to Wifi or LAN
Thank you
Hello:
For the smbus controller, download and install the second file on the link below and restart.
https://Downloadcenter.Intel.com/download/20775/Intel-chipset-device-software-INF-Update-utility-
For the USB3 controller, download, unzip and run the file setup.exe from the link below.
Wireless (network controller):
Bluetooth:
http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_149791_1
-
USB Universal Serial Bus (not installed)
Recently, I realized that my USB key is not working, I checked my devices & discover a yellow exclamation point.
I use Hp Pavilion Notebook D002Tx 14, Win7 64-bit.It's the Universal Serial Bus ID:
PCI\VEN_8086 & DEV_1E31 & SUBSYS_21BB103C & REV_04
PCI\VEN_8086 & DEV_1E31 & SUBSYS_21BB103C
PCI\VEN_8086 & DEV_1E31 & CC_0C0330
PCI\VEN_8086 & DEV_1E31 & CC_0C03And I have no idea what it is (which also has a yellow exclamation point)
Microsoft Teredo Tunneling adapterIt's hardware ID:
* TEREDO
I appreciate your help!
Hello:
You need this driver for usb 3.0:
Unfortunately, I do not know which driver you need for the other device.
I would like to google the problem. Here's a post on the Microsoft forum with some possible solutions...
Maybe you are looking for
-
a 'friend' used my system while I was and connected to facebook,now every time I raise of facebook, it opens with the name of newspaper here. and I can't get rid of it. Anyone have any ideas? Yes and now when I go out, I stop system, late, but what y
-
I tried to replace the contents of the old profile folder to the new folder and I also tried to simply replace the urlclassifier3.sqlite file, but that does not work either. Googling didn't help me in the last 24 hours, but surely there must be a way
-
Satellite C50 - B - 14 d - Windows 10 UEFI/MSC (and USB support)
Microsoft now offer Windows 10 free download(although for the moment they call it Windows Technical Preview). I have it on my laptop C50 - B - 14 d. There are 2 separate but, I think, related problems. First of all, back on the Windows 8 Toshiba Offi
-
I'm trying to update my itunes software, but I get an error message indicating that windows install is not available or is not installed correctly. I tried all suggestions on the helpcentre running commands and the audit services but nothing works. I
-
CBS / CSI errors resulting in a failed Windows Update 80070490
Hi people, Using Vista 32 bit: I met 80070490 error when you try to run Windows Update. I've tried a few things first Base: reboot, etc system restore, but no joy. I tried to run the Fix It of MS tool, but I can't get this to work, because it will no