Dv6-7135NR startup problem

Similar Questions

• HP Pavilion dv6-6135TX startup problems

  My brothers HP Pavilion dv6-6135TX, with specifications, 2nd generation Intel Core i7-2630QM (2 GHz) 4 GB RAM 640 GB HDD AMD Radeon HD 6770 M. Is having problems starting, if the battery is in, just lift the lid, it will get to start to boot or with the battery, plug the charger will get to start initialization. Unfortunately, he never through the start cycle die in 5 seconds, no matter if I press F2, F8, F11 or another F key, I entered the bios once, but once again, he is dead a few seconds. I tried out the hard drive to see if it would start from the HP recovery disk I have, but once again he is dead a few seconds, even tried out the cmos battery with no change in symptoms.

  At this point I think that the motherboard it passed, anyone got any thoughts on what is the problem?

  His cd player was working not the night before, have an error code 19 and we used thisdifficultycould this because of this new problem, see it work very well, after you have corrected this error and restarted?

  Hello memoirs,

  From what you explained is not starting the computer, with or without the battery, it looks like that the motherboard is gone.

  Anthony

• Pavilion dv6-7135nr: loss of network connectivity and wireless after upgrade to Windows 10 cable

  After the upgrade to Windows 10, I lose network connectivity after a restart of the computer.

  The operating system fails to load drivers Broadcom 4313 n. The driver date is May 8 202. The reason code is 31 on failure to load the drivers.

  I returned to Windows 7 and migrated to Windows 10 several times with the same result. I tried to upgrade on the Broadcom drivers, but Windows says they are up-to-date.

  I also see that the Realtek PCIe GBE Family Controller is having the same problem.

  I think it's a driver problem, but cannot find the correct set of drivers.

  Any help would be very useful. I have just re-upgrade to Windows 10 and have network connectivity.

  Hi @karbacdb,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dv6-7135nr Entertainment Notebook and problems with connectivity Wireless Windows 10. You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows 10.  Please restart the laptop twice to make sure that all updates are completed!

  Here is a document that shows how update the drivers that do not work correctly with Windows 10.

  Here is a tool of Broadcom for Windows 10 drivers that could help.

  Windows 10 drivers are available through Windows Update. Please be aware that HP does not Windows 10 drivers will be available from Windows Update.

  Please let me know how it goes.

  Thank you.

• iMac troubleshooting ADVANCED startup problem

  Hello. My iMac does not complete the boot process. It chime, then display the Apple logo.

  The progress bar will get about halfway, then disappears from the apple logo. Gray rest screen for about 2 minutes, then the computer shuts off and the process repeats. NOTE: the computer does NOT respond to the "safe" mode (shift key) or (command-R) disk utility commands. What else can I try?

  Start - computer restarts by itself-Yosemite

  Resolve startup problems-

  Resolve startup problems - (2)

  Resolve startup problems - (3)

• message from startup problem: imac photos: er zich een has doing voorgedaan bij het recovering bevoegdheden van (an error occurred in restoring the powers)

  message from startup problem: imac photos: er zich een has doing voorgedaan bij het recovering bevoegdheden van (an error occurred in restoring the powers)

  Do you mean, there is an error message about problems with access rights? (toegangsrechten?)

  Where your photo library is stored? In your pictures folder, or on an external drive?

  You share the photo library with another user?

• New problem z50 - 75 wireless? Startup problem

  Hello

  I had an another hp laptop which had a problems but the know-how could not fix it so they give money and I brought another Hp 4 days but then she had to be exchanged because of defective. Currys and PCWORLD even gave, but the problem kept pass. So I just paid the HP one and brought 3 days LENOVO Z50-75 it y a. the first Hp laptop, I had, had dns clients warnings in Event Viewer when you use wireless. Same thing on the new computer hp laptop. This problem still occurs in the LENOVO one too. These events started in Windows 10 for all laptops hp and lenovo. My computer laptop lenovo came with windows 10 in any case. So either it's a bug that should be fixed by a new update for the network adapter needs to be released. Computer laptop lenovo has Qualcomm Atheros the old hp laptop realtek the new computer hp laptop that was defective was and intel double wireless broadband and the same edition, DNS CLIENT EVENTS 1014 WARNINGS are still happening. This is definetley not my ISP fault because I replaced the router, more they found nothing on a week 2 diagnostics test on my internet. SO I just want to say lenovo that if there is a way you can fix this. Another thing is that after installation WIN10 threshold 2 on Lenovo Z50-75 when starting of the laptop it shows the logo screen once then black lenovo and then black screen again, then it boots. I have also all the latest updates. So if there is a way guys can fix that also. I'll post this in the microsoft forums too if they can help. Thank you

  Hi I managed to solve this problem by disabling the DNS CLIENT service, but always the startup problem also happens when I stop or restart the cirlce logo going arouns the shows as usual then flashes then closed restartsor and the same thing happens in the Welcome screen it flashes (black screen for a second), and goes after UPDATE of TH2

• HP Pavilion 23: startup problems

  Because we bought our computer in October 2014, we had many problems with the start, problems of drivers, startup problems, graphic card problems and more. It was supposed to be fixed once by the bu retailer still, there are questions. The biggest problem is starting:-it freezes, error messages that say lag not found drivers or disk not detected though when checked is. Also, we have done numerous resets hard which are just a quick temporary solution and back problems. We pay every month for a service contract with the retailer, but they mostly just try to run the store for our computer repair you... NOT HAPPY because for the third day, we bought there have been problems and we haven't bought a computer to sit in a workshop constantly, not at the price we paid coupled with the monthly fee for whatr amounts to nothing. Is there something we can do to solve this problem without driving miles and being without a computer that actually, we bought to USE?

  Hello

  Without compromising your contract, I suggest

  SYSINTERNALS which is a suite of tiny applications bit that may help.

  https://TechNet.Microsoft.com/en-us/Sysinternals/default

  Now only 3 or 4 are likely to be beneficial, and some does not at all because they are for servers etc.

  Thus a special interest may be...

  AutoRuns

  LoadOrder

  RamMap (maybe)

  Contig (maybe)

  PageDfrg

  ROOTKITREVEALER

  DiskView (maybe)

  PsInfo (not really)

  psping (not really)

  After trying a few please ask if there is something to be interpreted.

  I suggest you turn off auto update if you can.

• URGENT HELP PLEASE! Windows did an automatic update finished & gave me the Option "restart now or later. I chose Now.A screen from Windows is going down, a startup problem occurred immediately after the installation of updates, this has happened about 9 h

  Windows has finished just do the automatic updates on my Sony Vaio... He said that he should be released on... When it restarted it goes to the ' start windows normally, safe mode, safe mode w/network, safe w/command prompt mode and the last known good configuration "screen... I tried "start windows normally", and last known good configuration, and no matter what I did, it looks like its about to begin, with the 'windows' logo & he says it's the boot process, but then instantly a screen flashes, but too fast for me to read what he says, so I immediately finished fashion splash screen choose again. Whenever I try to get my PC to boot it goes through this again. Exactly... I tried restarting, shutdown PC up to 30 min. waiting & more & again it does the same thing & will NOT start! HELP PLEASE!
  I do not have my current work & News & saved downloads & need help & I timed commitments to people... ASAP PLEASE!
  Thanking you in advance...

  Windows XP logon screen does not appear and the computer continuously restarts
  http://support.Microsoft.com/kb/310396

  Resources to solve startup problems in Windows XP
  http://support.Microsoft.com/kb/308041 TaurArian [MVP] 2005-2010 - Update Services

• Startup problem blue screen that seems to be associated with BHDRVX64

  I have a laptop model Dell Inspiron N5110 running Windows 7 Home Premium 64 - Bit.  I have Norton Security Suite running - seems to be normal.  When I started my pc this morning, I got the dreaded blue screen of death.  A window will appear which indicates that there is a startup problems and offers several options to correct the startup problem.  One option is to run a startup repair program.  I tried and failed, then it has proposed restoring to a previous date program.  It does not work.  He suggested then reload the Windows program by providing more options of Windows rereloading.  I'll try the drive backuo system I created when I got the new computer-, but then, for reasons unknown, my pc suddenly decided to restart all of himself and it started normally.  Happy, happy.  But then a window pops up that says my computer has a device problem that has been identified as "ROOT\LEGACY_BHDRVX64\0000" she added that "BHDRVX64" was absent, does not, or that he needed a driver. Okay now my pc works normally, but I'm afraid to turn my pc off because this problem seems to be associated with start-up. »

  HELP, HELP. Any suggestion would be appreciated. Thank you. Bobbysan 70

  This program is part of the Norton Security software, so I would like to uninstall and reinstall.  For more information, see with Symantec.  Here is a link to the Google search, I did, FWIW.

  http://www.google.com/webhp?sourceid=toolbar-instant&hl=en&ion=1&qscrl=1&rlz=1T4TSNP_enUS464US464#hl=en&sugexp=les%3B&gs_nf=3&cp=8&gs_id=0&xhr=t&q=BHDRVX64&pf=p&tbo=d&qscrl=1&rlz=1T4TSNP_enUS464US464&output=search&sclient=psy-ab&oq=BHDRVX64&gs_l=&pbx=1&bav=on.2,or.r_gc.r_pw.r_qf.&fp=89c683d2e84ef3a4&bpcl=38625945&biw=768&bih=460&ion=1

  When you got your system back as you, I invite you to buy an external hard drive, and a good backup 3rd party program. You can configure it to automatically do everything in time and frequency of your choice. 1 TB external hard disks around $ 70 these days and a very good FREE backup program corresponds to the Easeus todo backup free of charge that you can download from

  http://www.todo-backup.com/products/home/free-backup-software.htm . Who can make you save a lot of time and frustration, the next time something like this happens. Sooner or later, it happens to all computers for one reason or another.

  Good luck.

• Instance startup problem

  Hello
  
  We have a CCR 2 node (ud1 UD2) environment, it was resolved to the top for a long time. We were able to start and stop instances and the database without problem.
  
  Suddenly 2 days back NODE1 has failed. Since then, we are not able to start the node NODE1 and getting following error: - (NODE2 is in place and fine tunning)
  
  [oracle@SER1 ~] $ srvctl start instance d SERVER1-i NODE1
  PRCD-1027: Impossible to retrieve the SERVER1 database
  RPRC-1070: could not verify if the ora.server1.db resource is registered
  Cannot communicate with crsd
  
  In addition, while trying to issue the boot command, get following error:
  
  $ sqlplus / as sysdba
  
  SQL > startup;
  ORA-01078: failure in the treatment of system settings
  ORA-01565: error in the identification of file "+ ORADFLT/server1/datafile/spfile.dbf".
  ORA-17503: ksfdopn:2 could not open the file +ORADFLT/server1/datafile/spfile.dbf
  ORA-29701: unable to connect to the Cluster Synchronization Service
  
  It is not the first time that we are launching this command. Please help with this problem...
  
  Thank you!
  
  Published by: 851602 on July 22, 2011 03:47
  
  Published by: 851602 on July 22, 2011 03:50

  Can you also please make sure that all network interfaces are correct.
  Ping the private sector of both nodes of interconnection and make sure that the servers can communicate.

  You should also look at 'How to Troubleshoot Grid Infrastructure startup problems [ID 1050908.1]'

  You said in your 1st post + "suddenly 2 days back NODE1 got failed...". » +
  That happened the node does get deported, did the crash of the instance...?
  Have you looked in the nodes of the log files if there are errors during this time? I don't understand that you can't get any kind of message in the log files to give us an indication of what could be wrong.

  Please look at all the files following logs on both nodes during the period when the 1st omitted node:

  /log//alert.log
  /log//crsd/crsd.log
  /log//cssd/ocssd.log
  /log//ohasd/ohasd.log
  

  Concerning

  Published by: user10506095 on July 25, 2011 12:02

• HP Pavilion dv6-1355dx: laptop startup problems and lost product key

  My laptop is not starting. I get the message "device not found Boot. Please install the operating system on your hard disk "." I tried the steps listed on the HP website (step 1: Hard reset, step 2: restore default BIOS settings, step 3: hard disk Test, step 4: reconnect the hard drive, step 5: System Recovery), but the problem persists.

  Please guide me in the following things.
  1. What can be done to fix this? I got control of the laptop of one of the centres of local services. They said that there is a problem with the hard drive. I'll have to get the replaced disk. I have no other option?
  2. I bought my laptop in 2009. It came with Windows 7 Edition home premium. Now, I don't have a product key to reinstall the same copy of windows 7. Also, I am not able to connect to the laptop because of that I won't be able to retrieve the product key from your laptop. The sticker on the back of the laptop is not more readable. It hits the major options to retrieve the key. Is there another method by which I can retrieve the key? So far, I used to restore my computer laptop settings every time I need to format my laptop.

  3. the only thing I have with me are recovery disks (3 in total). These will be of any help in order to get the windows installed on the new hard drive? Other suggestions pls?

  Looks like a bad HDD. Your product key of WIn7 which carried out the sticker on the underside of your laptop. You must get the HP HP recovery or 3rd party disc to restore your system to the rear. And there's a good chance your HARD drive is bad and must be replaced.

  We also support hp user forum service not a HP.

  HP computers - get HP recovery disks or HP USB recovery disc
  Read this before ordering your recovery discs! (United States and Canada only)
  End of life office computer and computer laptop recovery sets

• Flashing question mark in the Macbook Pro Retina early 2015 at startup problem

  I have the 128 GB of Macbook Pro retina early 2015 model. I bought my macbook, the year last January 2015. I am just now having problem with my mac. When I'm trying to boot my laptop it shows the flashing question mark and it does not start after that. For a while it worked, but after the update the laptop is never again.

  After reading all the articles related to this issue and even after trying it the entire process for the departure of mac. I'm not able to start.

  I tried all the normal recovery process in the process of recovery of the internet, but still it does not work for me. When I select the disk utility in the dialog box, the drive does not appear here, so I can't erase and start to reinstall the operating system.

  What should I do now? I was looking for OEM SSD, but it's very expensive. with this prize money of (here in INDIA RS - 50 k) I can get the Macbook Air.

  If please guide me on how to start the mac or what do I do next?

  Thank you.

  Frank Bsu

  We have no way of knowing exactly what you have tried that doesn't work unless you tell us. A flashing question mark boot means that your Mac is unable to locate a startup disk to boot from.

  If you haven't tried... start your Mac holding the key Option. That should launch the boot window manager have been, you can select the startup disk, and then click on restart.

  If this does not help, you will need to take the Mac for the service.

  If a flashing question mark appears when you start your Mac - Apple Support

• Pavilion dv6: graphic driver problems

  I recently updated my graphics drivers on the AMD website, which I did not know that at the time, did not fully support the laptop itself. After having done that, I had a problem with playback of videos where in certain circumstances the video would be black but audio would play again. I tried to uninstall the graphics driver that seems to resolve the video issue, but then none of my games would launch at all. Is there a way that I can return the graphic drivers for the basic version where I had not either of these issues?

  Hello:

  See if works by running system restore.

  Select a restore point created before you tried to update the graphics driver from AMD.

  If you are not familiar with how it works, please see the info on the link below.

  http://Windows.Microsoft.com/en-us/Windows7/restore-system-files-and-settings

  If this does not work, reinstall the switchable graphics from AMD/Intel support page driver and the driver of your laptop.

  If you are uncertain which one that would be, please send the number of full model of your computer laptop dv6.

• 2207 monitor: HP: w2207h monitor startup problem

  My HP monitor only has not been commissioning correctly several months now. When it appeared everything first, the monitor has refused to start when the power button has been pressed. I noticed a noise "rattling or burst" and could see that the blue power light was bike works at short intervals. After some time the monitor came; However, as the time (weeks) traveled by the monitor continued to click and not to open the splash screen. When it happened I pressed the button of keyboard sleep and distributed, and for some reason, the monitor eventually would come on.

  The monitor is not connected to a TV, it is only connected to the computer by VGA cable. I thought that the problem could be something to do with either the screen saver sleep or the settings mode, so I checked the power options and found that the two 'turn it off display", and"Put the computer to sleep"parameters had never chosen as their option. I ran the HP Hardware Diagnostic tools to monitor, but the tests were only good for alignment, color, brightness, etc.  I also checked to see if she needed a driver updated by the following process: computers > properties > tasks > Device Manager, and then clicking on other devices and by double clicking on the monitor; on the general tab, it displays the message, "this device is functioning correctly.

  After a few weeks over time, sleep button thing has stopped working and I tried to leave the monitor on the night with the computer turned off. When the computer was returned the next day, the monitor took over the rattling again, but still it would end by lights.

  Currently, I've resorted to press the button sleep when the monitor does not start alone, so far successfully startups, but I'm afraid it will cease to begin.

  Does anyone know a solution to this problem?

  The computer is a desktop PC of HP Pavilion a6637c-b with a HP w2207h monitor LCD 22 inch flat screen with Auto Picture Rotation function. The OS is a Windows Home Premium, 64-bit edition. The computer has 5 GB memory and 640 GB hard drive. I will provide more information hardware or software if necessary.

  Hi @oldognutrix,

  Yes, it sounds like it is the monitor.

  Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

• Flow of HT 7-5709 - Boot/startup problems

  I just bought the HP Jet 7 tablet.  The first time I turned on the Tablet, I saw the HP logo for a few seconds and the device off.  The dots has not yet come full circle.  I thought it might be a power problem, so I plugged it and saw the charging symbol on the screen.  I waited for a while and tried again.  I had to hold the power button on 5 + seconds until I could see the backlight lights up so I know it wasn't sleep.

  This time, he said "Automatic repair of preparation."  Points of fact just two revolutions and the device suddenly stops.  Next time, he had no any text and points to the subject a spin before stopping.

  I let it charge overnight.  I tried from the start this morning and it alternates between the two start modes.  Points are about a year and a half laps if there is no text and about two if it says "Automatic repair of preparation."

  I'm able to get in the boot without difficulty menu.  The diagnostic system is no problem.  The only thing that stands out on the screen "System information", it is that the "born on Date" is "00/00/0000." The date of the main battery is "27/10/2014."

  I went to the website listed on the start menu (hp.com/go/techcenter/startup), but don't see anything relevant.

  If I select F11 (System Restore) in the start menu, it returns me to a screen with an HP logo and the text "Please wait".  Points do two or three laps and the powers of the device down.

  Suggestions?

  Yes, I had this problem and a few others here did too.  The solution is to run the battery completely down and it will say 'reset CMOS' when you put it to the top.  It should then be started normally.  You can expedite the discharge of the battery by running UEFI Boot Menu F2 System Diagnostics = > System Tests = > large trial = > loop up to the error.  If you have an OTG adpater, you can also plug a USB hub without power or whatever USB devices you have and who's going to pull it down faster.

  Another option is to disconnect the battery, HP Jet 7 Tablet Maintenance and Service Guide says this can be done by simply removing the back cover, but this seems incorrect.  I watched my 7 steam and the cable of the battery falls below the intermediate mount cover so this must also be removed to expose the system board and the battery connector, it is held by six screws.  I opted to run the battery instead.

  Once the shelf upward, toward the latest EFI firmware update should hopefully prevent him of happening again.