Dv6000 no video display or external monitor

Similar Questions

• Satellite Pro L360-14F - cannot play videos on the external monitor

  Toshiba Satellite Pro L360-14F
  Video files as avi, flv, mp4 are played with SM-player etc on the screen of the laptop, but not on the external monitor attached.
  A newspaper there is the error message: MPlayer crashed by the bath OF CPU/FPU/RAM usage.

  Which may mean that?

  You already go to the external display by using the FN + F5 keys?
  To do this.

  In addition, you must go first to the external screen and then you need to start the windows media player or other video player.

  I advise to use the VLC Player. It s free fro and plays most of the files

• Dynadock U10 & Satellite Pro U400 (video display resolution - main monitor)

  Hi all
  I want to put in place the video driver Dynadock see the external monitor as primary monitor:
  I have difficulty option 'Mirror', but I can't change the resolution: it is set at 1280 x 1024 but I see 1280 x 800 (as in the laptop monitor) with the large black bars on top/bottom of my screen (losing a part of my screen 19 '')
  I guess if Iget 'turn off' the netbook monitor and adjustment of the external Dynadock monitor as primary monitor, I would see fine at maximum resolution (in the same way as if I connect the external display on the laptop VGA port: it works fine)
  Any suggestion?

  Thanks in advance!

  Hello januan,

  If you set the 'mirror' mode, you would have the same resolution on the external monitor, the internal display.
  In this mode you cannot set a resolution higher on the monitor station on the inside.

  If you set "extend mode", you can set different resolutions.

  You have installed the latest driver for display link?
  From this page you can download and install: http://www.displaylink.com/support/downloads.html

  Best regards

• Satellite A200-1BJ - no display on external monitor

  Hello

  I have a display problem with my laptop, which is:

  When I connect my computer to an external display (projector - data show - using the rgb or s-video cable), the contents of my computer are not displayed.
  I used F5, Catalyst Control Center, but without success.
  When I connect it with a TV using s-video, I get the message "no signal".
  I think of the existence of the other devices, but the content is not sent to the external display.

  I don't know what the problem is. I need to use my computer and the screen using a projector for my presentations, which is very common.
  The problem is that he used to work, then suddenly it stopped display on external displays.
  I could not understand the problem, then I thought that the settings have been changed accidentally.
  So I formatted my computer back to the factory setting, but my attempt failed and it still does not display on the external monitor.

  My computer specs:
  -Toshiba Satellite A200-1BJ
  -Processor: Intel Core2 Duo
  -OS: Windows Vista editions Home Premium
  -Graphics card: ATI Mobility Radeon HD 2600

  Does anyone know the solution?

  Thanks in advance.

  In your case I would update the BIOS and the display driver. The two you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Have you tried different cables? Maybe it s faulty or too long.

  Also, be sure to use a rate of resolution and refresh supported for the external monitor display. You can change that in Catalyst Control Center.

• Satellite U305: can't watch video on the external monitor on Vista with Dynadock

  Hi mates,

  I have a Satellite U305 running Windows Vista, I also bought a VGA Dynadock with HP 20 "external monitor.

  I have uppdated all Dynadock readers (Audio, video, etc.) to the latest version, but DVD-video or MPEG video recorded with my camera is not possible to look at the monitor extended that in the main screen (laptop computer monitor).

  For example, my DVD Toshiba drive works normally on the laptop monitor but when I transfer window extended monitor, Toshiba DVD Player stops to work.
  Video does not work on the extended screen.

  Is this OK or I did something wrong configuration? Is this a bug? If this is a bug, how to fix this bug?

  I'm you worry because I plug a large external monitor to watch a few movies that I can't watch it.

  Thanks in advance for your help.

  Nilton

  I agree with the snipe of the user. The dynadock is simply not designed to transfer the enormous amount of data that accumulate to watch movies on DVD.
  The USB ports are simply not designed for this

• Re: Satellite Pro U400-130 poor quality display on external monitor

  Hello

  If I connect an external monitor to the display quality VGA port is quite poor. It looks like a 'grainy twinkle"(sorry hard to describe). I have tried several different monitors and made all the adjustments that I can find. If I increase the contrast to max is not visible, but still the screen is too bright. The internal TFT is perfect.

  Have you tried to change the display settings on monitor itself (brightness)?

  I have connected to my office two different external screens (19 and 22) to U400, and the image is OK. I really don't understand what makes you so unhappy.

• Satellite L850-1V5 AMD RADEON HD M 7670 - no display on external monitor

  Hello.

  I'm having a strange problem with my Satellite L850-1V5 new with card in order to 7670M AMD RADEON HD.
  (It runs windows 8 64-bit family)

  At the beginning I couldn't open the CCC.
  So I uninstalled the program and reinstalled the drivers I found here, on the Web at Toshiba Europe site.
  Now it works well.
  But now I have another problem.

  First, I tried to extend/duplicate(whatever, it does not really matter) my workstation via the VGA port.
  In CTC, I could see that he acknowledged my external monitor model and even the mouse cursor has acted as the Office has been extended.

  BUT
  1. it has no image on the external monitor
  2. on the input of the external display Menu(:where one chooses the port to be used, i.e. VGA, HDMI, SCART, DVI etc etc) VGA port c o u l d NOT be selected, as if there were no cable on the external monitor

  Then I tried an HDMI cable with the same result, with the difference that on the external screen menu entry the HDMI port c o u l d be selected, as if it were a cable on the external monitor, but the monitor says "no signal".

  I tried the same steps via Windows Control Panel (menu Display).

  Same results...

  I tried on 2 different external monitors (the two LG ones, even if we're about 3 years older than the other, so I guess he should have nothing to do with the monitor).

  Any ideas?
  Is this a hardware problem, a software problem? Toshiba Service go?

  Post edited by: L850

  Hello

  To my knowledge, use the keyboard shortcut to switch to an external monitor.
  AFAIK the F4 (or Fn + F4) changes the output display.

  Have you tried using this button?

• Video output for external monitor default

  I used my Dell Inspiron 9400 for several years, almost always with video output to a monitor 19 ' 4:3, using Fn + F8 or Win Key + P select this option for the single release. I have now broken screen of my laptop and wish the monitor output, the default output. Is this possible? I use Windows 7.

  My problem has been resolved:

  Click Start > Control Panel > NVIDIA Control Panel: select "set up several screens.

  In the window

  1: choose the nView Display mode to use: select "use only one display.

  2: select the display you want to use: select the listed monitor

  3: select the view that you want Windows to use as primary: select the listed monitor

• Error code: this message appears when the player fails to output the video to an external monitor.

  I never put my laptop to play on an external monitor.  Why this new software of computer/Toshiba DVD thinks I want him to play here?  How can I change the setting on the laptop?

  Hi GrettaYoung,

  To better understand the question, please provide the following information:

  (a) when you get this error message? What is you receive the exact error message?

  (b) are what DVD software you referring? If it works well before?

  The following steps are worth to try, run the fixit available in the link below to clear multiple configurations

  How can I delete multiple configuration monitor to a computer that is running Windows Vista?
  http://support.Microsoft.com/kb/934552

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Re: Satellite A100-283 - 16:9 display on external monitor resolution

  Hello

  I just got an old Toshiba Satellite A100-283 and tried to connect it to a TFT 22 ". Somehow, it seems that this laptop graphics card does not support the external screen such as 1920 x 1080 resolutions. I find 16:9 1920 x 1440 resolutions and such but not at all.
  Is - anyone here know if there is a way to get this notebook running on an external display in 16:9?

  Thank you in advance for your help!

  Heike

  Hey Buddy,

  You can change the screen resolution to the 16:9 format when you remove the brand to hide modes that this monitor cannot display as [THIS | http://blog.wildvista.com/wp-content/uploads/2009/12/Lightroom_hide_modes-340x400.png] photo?

  Check it then [screen resolutions | http://blog.wildvista.com/wp-content/uploads/2009/12/Lightroom_vertical_res-355x400.png] again if you select another resolution of the screen

• Dynadock U Display problems on external monitor.

  I have a U Dynadock docking station connected to a laptop of HP Elitebook. I have a 24 "FullHD Viewsonic external monitor connected to the DVI - D port on the Dynadock and a second monitor connected to the VGA port on the laptop. The second monitor works fine but the main monitor connected to the Dynadock is slow to update, I can't use AutoCAD or software playback such as display support will not regenerate properly, in other words each movement leaves a trace and screen ends up a mess, videos on the used media player are not working at all, however if I move the on the second monitor, they work fine.

  The primary monitor is set to the resolution 1920 x 1080.

  The second problem is whenever I restart to start the laptop the primary monitor is at a lower resolution I need to readjust every time. It didn't happen for the first days, I got the Dynadock, but now it happens every time. I downloaded the latest DisplayLink driver but did not help. I also tried to download the latest Dynadock driver but could not get the image of CD ROM to run.

  > The second monitor works fine but the main monitor connected to the Dynadock is slow to update, I can't use AutoCAD or software support of reading such as the display refresh correctly, in other words, each movement leaves a trace and the screen ends up a mess, videos on the used media player work not at all However if I move the on the second monitor, they work fine.

  The Dynadock is connected to the computer via a USB cable to the USB port.
  In my opinion the USB ports are not designed to transfer this large amount of data that are created by a video.

  You can use the Dynadock as part of some office applications, a software, but I doubt it would work properly I watch the video on the external monitor.

• Portege Z830: I want to disable internal LCD and use only the external monitor

  I have a Toshiba Portege z830.
  I use my laptop in "Extended desktop", mode with an external monitor, which is the main display.
  In this mode, the two screens are still on, but I want the built-in LCD screen to be opened only when I use it.

  Is this possible?
  Thank you.

  Hello

  In my opinion, this is not possible.
  In extended mode, you use and display internal but extended and the long part is visible on the external monitor.
  In such a case its any that your external monitor is set as main display.

  If you want to use an external monitor only, you can only export the video signal on external monitor by pressing FN + F5

• Portege R500 - no image on the external monitor

  Hello everyone

  There is no image on the external monitor on my Portege R500 with Win XP SP3.
  The screen seems to receive the signal, but the screen remains black.

  Anyone know a solution for this problem?
  Sorry for my bad English.

  Thank you.
  Daniel

  Hello

  How have you tried to exit from display on an external monitor?
  Usually, you use the FN + F5 key combination.
  This allows you to switch between the two screens; laptop + external display.

  I had a problem to view a video on the external monitor because the video is already running. You must switch to the external display until you start the movie, etc.

• Satellite Pro6100 - external monitor not showing movies

  I searched but couldn't find anything related. I wanted to watch a movie through the external monitor port connected to a projector. I could see all the big screen except the movie itself.
  I checked the laptop screen and the film on this subject but it is not cloned - I just get the border of media player and the buttons but it shows only a black screen, not the film.

  I tried a friend's Tecra 9000 and it shows the film perfectly. What gives?
  Updated the BIOS and I have the latest drivers Toshiba provided and followed all the guides for TV out, monitor, cloning, setting resolution etc, just have not found the magic combination.

  > I checked the laptop screen and the film on this subject but it is not cloned - I just get the border of media player and the buttons but it shows only a black screen, not the film.
  The settings collection can be all problems as suggested by Akuma.
  In addition it is very important that you switch the display on external monitor first before you start the movie!

• Satellite A215-S7414 - no signal on external monitor

  I have the model A215-S7414 and the LCD screen is broken,
  So now I have a 2nd moniter "run the image" for my laptop

  The image is available by loading microsoft and F2, F8, F12 logos
  However, to start the laptop I always had disable driver signature enforcement to get to the point where I can access Windows

  I hear the laptop that windows has loaded, but the moniter automatically stops and says 'no signal '.
  the monitor is an Emachine E19T6W

  I ran a start-up repair, don't know if it's relevant, but he says
  "unspecified system configuration changes may have caused the problem.

  so, if you please help me.
  I would gladly appreciate it willingly

  Hi mate

  The only option that could be useful in your case is the use of the FN + F5 key combination.
  If this key combination function, you should be able to switch the video output to an external monitor.

  But if the FN + F5 combination doesn't function then I put t see no other workaround to the release of the video on the external monitor, how do you want to change something if you n t see anything on the screen?