DV6000z - HP necessary for the wireless adapter part number

Could someone send me the part number HP DV6000z laptop correct wireless card?  P/N of the machine number is RD167AV.

Thank you.

module card Mini WLAN 802.11a/b/g for use only with models of computer with processors AMD in MOW countries or regions listed below: 407160-001

P. 3 - 17 of the manual here:

Manual

http://www.Amazon.com/HP-Broadcom-wireless-407160-001-BCM94311MCAG/DP/B00115B4EY/ref=sr_1_1?ie=UTF8&QID=1455901535&SR=8-1&keywords=407160-001

If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

Tags: Notebooks

Similar Questions

  • New installation of Windows 7; No driver for the wireless adapter

    Ohmuhgod, please help!

    I'm on a Pavilion G7 - 2017cl and just installed Windows 7 Ultimate 64 bit. I installed all the recommended drivers, software and upgrades http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5275...              and everything is going well except for the wireless network card driver. the sp57538.exe and the sp56154.exe do not install correctly.

    In the devices under other devices Manager, there's a yellow! indicator "Network controller" with "manufacturer: unknown" and under the hardware id is:

    PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C & REV_01
    PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C
    PCI\VEN_168C & DEV_0032 & CC_028000
    PCI\VEN_168C & DEV_0032 & CC_0280

    I tried: manually update the driver with several other downloads of various products of hp as a poke-and-hope approach; all the different combinations of deactivation/activation of the active devices while trying to install the drivers; install drivers in safe mode; Uninstall and reinstall the software amd chipset driver; HP Support Assistant; A patch of Bios setting parameters by default after a hard reset; and at my wits end, reinstalling the operating system and install all the fresh drivers one by one with a reboot after each... same result.

    I've been googling and binging for about ten hours... magical HP assistants, please send me a patch!

    Try Atheros:

    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D0%257CswItem%253Dob_108905_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D3%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  • Provided the driver for the wireless adapter is unable to install DW1550

    Hello

    I just reinstalled Windows 7 Home Premium 64 - bit on my Alienware X 51 R2, and I made sure to follow the order of installation of driver found here: http://www.dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=gen&docid=268873

    However, when I tried to install the driver provided on the Dell Support Site for the wireless Dell 1550 card wireless network, the installation fails systematically. I've included the output of the log below:

    [06/07/14 14:51:28] Update the Package execution started
    [06/07/14 14:51:28] Original command line: ' "E:\drivers\X51-R2_Network_Driver_4R14J_WN_9.2.0.514_A01."» EXE ".
    [06/07/14 14:51:28] DUP Framework EXE Version: 3.0.93.1
    [06/07/14 14:51:28] DUP release: 4R14JX00-00
    [06/07/14 14:51:28] Setting initialization...
    [06/07/14 14:51:28] logo.png
    [06/07/14 14:51:32] The user command: participated in
    [06/07/14 14:51:32] DUP of capacity value: 39845887 (0x25FFFFF)
    [06/07/14 14:51:32] DUP of the vendor software version: 9.2.0.514
    [06/07/14 14:51:32] Local model/system Compatible with this package? Yes
    [06/07/14 14:51:32] Local system OS version: 6.1.1.0
    [06/07/14 14:51:32] OS Compatible with this package? Yes
    [06/07/14 14:51:32] Local system OS language: EN
    [06/07/14 14:51:32] Language is Compatible with this package? Yes
    [06/07/14 14:51:32] Identified behavior: participated in
    [06/07/14 14:51:32] The payload temporary log file name: C:\ProgramData\dell\drivers\X51-R2_Network_Driver_4R14J_WN_9.2.0.514_A01\DUP815F.tmp
    [06/07/14 14:51:32] "Translated from command line: Setup_MUP.exe /LOG"C:\ProgramData\dell\drivers\X51-R2_Network_Driver_4R14J_WN_9.2.0.514_A01\DUP815F.tmp.
    [06/07/14 14:51:32] Path: C:\ProgramData\dell\drivers\X51-R2_Network_Driver_4R14J_WN_9.2.0.514_A01
    [06/07/14 14:51:32] Identified behavior: participated in
    [06/07/14 14:52:13] Add the software provider Log: C:\ProgramData\dell\drivers\X51-R2_Network_Driver_4R14J_WN_9.2.0.514_A01\DUP815F.tmp
    [06/07/14 14:52:13]
    -Beginning of the software vendor log-

    [06/07/14 14:52:13] ASCII log file load detected.
    [06/07/14 14:52:13] [2014-6-7 14:51:32] Installation start up.
    [2014-6-7 14:51:32] Command-line is:[/LOG"C:\ProgramData\dell\drivers\X51-R2_Network_Driver_4R14J_WN_9.2.0.514_A01\DUP815F.tmp"]

    [06/07/14 14:52:13]
    -End of the software vendor log-

    [06/07/14 14:52:13] Software provider return Code: 7
    [06/07/14 14:52:13] logo.png
    [06/07/14 14:52:13] Code name of output: ERROR
    [06/07/14 14:52:13] Exit code value: 1 (0x1)
    [06/07/14 14:52:13] Result: FAILURE
    [06/07/14 14:52:18] Open file: C:\ProgramData\Dell\UpdatePackage\Log\X51-R2_Network_Driver_4R14J_WN_9.2.0.514_A01.txt

    I also noticed that the Setup application lists the driver as being of "Dell DW1506 WLAN 802.11 b/g/n.

    I thought that the incorrect model number was weird, but maybe it's something the programmer neglected during the compilation of the installer?

    Any help would be appreciated!

    Hello!

    The current driver for this wireless card is version: 6.5.1.4400, A00, so I think that you have downloaded the wrong driver. Try to install from this link.

    For later use, I recommend that you use this article for instructions on how to install the drivers.

    Let me know how it goes!

  • Search for the name and part number of the CPU or fan of radiator for Pavilion m9300t Desktop fan.

    Looking for a part number and the name of processor or fan for desktop computer HP Pavilion m9300t radiator fan. Noise one supplied with the PC is a terrible grinding until the system stops and dies.

    Hello

    I highly recommend not to turn on your computer until the fan is replaced.

    Is your PC still under warranty?

    You may not use the original part.

    All you need is to have a CPU for a socket 775 CPU fan (LGA775). I recommend that you choose 90-92mm fan size due to the limitations of the original business space.

    You will also need thermal interface (I recommend Arctic Silver 5 or OCZ Freeze Thermal Interface material)

    material can be purchased at any store for PC. You can also have the fan replaced in a PC shop little charges.

    The original p/n is 5188-5525 to the heat sink. Source reference: HP PartSurfer

  • S5229UK - Windows 8 - drivers for the wireless adapter


    The image below, which comes from your post is your NVIDIA Force / n 10/100 Mbps Ethernet wired LAN adapt;

    Your Lite-on adapter (Ralink) 802.11 Wireless LAN USB seems to be missing completely. Please, shut down your computer and unplug it. Open the side of your computer and look for a loose wire not connected at one end and reconnect the motherboard. He most likely got out a header F_USB 6 of.

    Please click the White Star of KUDOS to show your appreciation

  • Qosmio G20 - 114 - I'm looking for an antenna adapter part number

    I just bought my Qosmio G20-114
    Bought 2nd hand from ebay.
    I love it, but I have only 1 problem

    The Coaxial cable that comes with his new, the seller had not got her.
    I rang toshiba and they put me through their parts department in the United Kingdom and I asked them about the part and they said they have, but...
    they can't post in Ireland.

    So all I need to know is the number of part im looking for.
    Its the cable that connects to the Tv tuner on the back of the laptop

    Thanks in advance

    Pajo

    > I banded Toshiba and they put me through their parts department in the United Kingdom and I asked them about the part and they said they have but... they can't post in Ireland.
    Why didn t ask you a reference number if you have already contacted the Toshiba in the United Kingdom?

    I think that there are also some FSA in Ireland who are able to order this part at Toshiba.
    Therefore, you should contact the ASP in Ireland and they could order directly in such part of Toshiba.

    Welcome them

  • There is a problem with the driver for a wireless adapter that if it is not compatible or not supported

    My grandmother came to visit me in Belgium and brought her laptop with her. It is Windows 7 and I bought in Ukraine. Thus, she cannot use wireless internet at my place. Troubleshooting scan says there is a problem with the driver for a wireless adapter that is it is not compatible or not supported, something like that. All sound systems are in Russian is not easy for me to explain it. Is it possible to fix this problem or she can't use her laptop to go on the net at all? Thank you!

    If it's a driver fault, can go you on another pc to work to manufacturers support web site for the 'Ukraine' pc and see if the wireless drivers are available there. If they are, download the latest compatible drivers for your pc and transfer them to it by a stick of memory from SD or USB and then install them.

    This may be due to a setting of your network security wireless, for example, that is your network is set to WPA2 but pc does not support. Check configurations for compatibility with your router wireless sound.

    See if anything here help - http://windows.microsoft.com/en-us/windows/setting-wireless-network#1TC=windows-7

    At worst, is it not possible to connect via a cable to your router, esp, if is only a visit to sound.

  • Re: Unable to get the wireless adapter to work on my Satellite L550-1CC

    I'm getting bored with this laptop, I reinstalled windows 7 (32 bit) and can not get the wireless adapter to work.

    My router settings are perfect, my netbook is zero connection problems - the router is just inches away from the laptop most of the time - the laptop insists that there is "no available networks."

    This of course is BS, before I reinstalled windows I could pick up 3 other neighbouring networks as well as mine.

    Windows automatically installed the wireless network - I thought that could be the problem, so I downloaded the realtek driver directly.

    No difference. Always the small icon with Red Cross barred through it.

    I thought it could have been a hot key problem - so I installed the flash card driver that apparently controls the access keys (for some reason any).

    Shortcut keys still don't work - I could really care about that - it's just the wireless network I need.

    Thanks for any help I receive.

    > my netbook has zero connection problems - the router is just inches away from the laptop most of the time - yet the laptop insists there is "no available networks."
    After reading this sentence, I'm a bit confused. If there is no available WLAN networks how your laptop had zero problems to connect?

    One last thing:
    > Of course is BS, before I reinstalled windows I could pick up 3 other neighbouring networks as well as mine.
    What is the difference between the old and the new installation of Windows?

    In general the WLAN use is fairly simple.
    Wireless network card - must be installed correctly (listed in Device Manager
    WLAN card - must be enabled using FN + F8 key combination to activate the wireless network card
    -scan the available WLAN networks area, click on the button of your WLAN and use connect
    -put key WLAN if necessary and after a few seconds WLAN connection will work

    I did this many times on laptops preinstalled Win7 and didn't have any problems. On all laptop computers pre-installed with Toshiba recovery image (factory settings) is not necessary to change the WLAN settings.

  • Not able to install the wireless adapter built on Tecra 8200

    Hi all

    I have a Tecra 8200

    After you have installed Windows XP Pro, the wireless adapter will be found as PCMCIA MTD-0002.

    I cannot install the drivers for the card of m.

    XP is SP2
    BIOS is 1.60

    Could someone help me what to do, thanks in advance.

    Brgds,

    Thomas

    Hello

    If you have the card WLAN MiniPCI Agere, the system needs to install the following registry key with the WLAN card driver:
    [HKEY_LOCAL_MACHINE es\Pcmcia\Parameters]
    "IrqRouteToPciController" = dword:00000006

    I found a statement of installation:

    1. new installation of Windows XP Service Pack 2 package
    or clean install Windows XP Gold package and install Service Pack 2 update image on it.
    2 copy the TICardBusIrqRouting.reg on the system, and then click the file on the system.
    3. the following window will appear,
    "Are you sure that you want to add the information in xxxxx\DISABL ~ 1.REG in the registry.
    Then select "Yes".
    xxxxx is the location of TICardBusIrqRouting.reg
    4. the next window will appear,
    "Information in xxxxx\DISABL ~ 1.REG have been entered in the register."
    Then click on 'OK '.
    xxxxx is the location of TICardBusIrqRouting.reg
    5 restart the system

    Good luck!
    Good bye

  • Satellite 5200 903 does not detect the wireless adapter

    Hello everyone,
    I wonder if anyone can switch me to it...
    Since I reinstalled the operating system (my XP pro SP2) PC seems not detecting don't nor the wireless adapter in the device under network adapter Manager.
    Also the light of the flexibility wireless no longer not.
    I also have problems to access the BIOS to check if the card is detected there, have not a Toshiba HW setup in Control Panel as described in the manual.
    Any suggestions?

    Hello Juliana

    The question is how did you install the operating system? If you use the restore CD to install all tools including Toshiba HW setup. If the unit is pre-installed with the Microsoft Windows XP Home edition CD, you must install all the stuff of Toshiba late.

    Just a little explanation about the wireless network card. Basically, if the wireless switch indicator turns not on s clearly indicate on hardware problem. I guess that the wireless card is faulty. Also check if the card is listed in the Device Manager.

    If you want to enter the BIOS settings pres ESC key at the boot routine and keep it down for a few seconds.

    Good bye

  • HP ENVY x 360-15-u110dx: reset the wireless adapter

    I have a new HP ENVY x 360-15-u110dx and it is not connected to the internet. I have to constantly reset the wireless adapter. What should I do to fix this?

    @pjg31660,

    Hello and thanks for the display on the HP support forums.  Here is a link that should help you solve your problem.

    HP PC - Troubleshooting wireless network and Internet (Windows 8)

    Please let me know how things are going.

    Thanks again for posting and have a great day.

  • problem witththe driver for the wireless network connection card

    Quite suddenly my laptop (Toshiba) could not connect to my Modem and printer. I can only connect to the internet with a cable connection to the modem. The printer reports no problem with the connection. Troubleshooting report 'Problem with the driver for the wireless network connection card.' Problems also with ISATAP MS Driver adapter and Teredo Tunneling adapter. Software could not solve the problem.  A technician online know-how also faled to solve the problem after an hour trying everything - uninstalling and reinstalling, etc. He thought it would be a virus even though I have several active antivirus programs. Any ideas? Should I chuck the laptop away and buy a new one?

    If, as you say, you have several active antivirus running programs, they will conflict with each other and you will have no protection

    Visit the support of Tosh, specific to your model, and reinstall the drivers for the chipset and wireless

  • Not prompted to enter the password for the wireless connection.

    I have windows 7 and were able to access wifi trouble-free connections. However, today, I'm at a new location and when I click on the desired link I don't get no prompt to enter the password or key. I can access my computer connection currently wifes laptop so I know that the connection is working correctly. I went to control panel, network configuration and manage the connections and removed all my other connections. I rebooted and still cannot access the connection desired because I can not enter the password. I also tried to add the connection and it still doesn't work. Thanks for your help!

    Hello

    In the same exact location, your wireless computer does not work, and your wife request computer password and works OK with the password?

    The password prompt is displayed only after the computer is currently connected to the access point.

    Maybe your computer firewall blocks the ability to connect to the access point.

    Wireless in general.

    Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

    Check the Device Manager for the wireless card valid entry.

    http://www.ezlan.NET/Win7/net_dm.jpg

    If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

    Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

    http://www.ezlan.NET/Win7/net_connection_tcp.jpg

    Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

    Make sure you firewall No. preventing / blocks wireless components to join the network.

    Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

    When the work turns on the Wireless security.

    Note * people sometimes make mistakes in writing and retype the password for security.

    Another way is to copy in the menu of the router and then paste it when asked of the wireless card.

    --------------------------------------------------

    I really checked and configured every thing and it doesn't work.

    Software firewall application that is not configured to allow local traffic (between the computer and the router is also a possible problem.
    some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .


    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • VMware Player 5.0.2 does not see the wireless adapter

    Hello guys,.

    I'm having a problem with VMware Player 5.0.2 build-1031769 (the same exist with older versions of VMware Player 5 but it's the only one I currently have).

    The drive does not recognize my network card Intel Centrino Ultimate-N 6300 AGN wireless on a laptop Lenovo T410. I have an another T410 with Intel Centrino Ultimate-N 6200 AGN and it works fine.

    Here are the symptoms:

    -When using NAT networking it works fine

    -When I use open networking, the guest (in this case, Windows XP) operating system said that the cable is disconnected

    -J' found a few threads saying that this could be a router problem, but it's not because with the other computer laptop in the same network, everything works well

    -When I connect to the network using the work of connection LAN (cable) filled without problem

    -My Network on the host operating system works without any problem

    -Windows recognize the adapter wireless without any problem:

    Device Manager.jpg

    -VMware Player does not display the adapter in the transition parameters but shows a kind of virtual map of Microsoft:

    VM Bridging Settings.jpg

    -When I run the virtual network Editor is the same: no real but adapter Microsoft virtual card

    Virtual.jpg

    -J' tried to reset the default network configuration, but this did not help

    I am running Windows 8 Enterprise.

    I'd appreciate any help. Thank you.

    Have you looked in the host properties for the wireless NETWORK card see if the VMware Bridge Protocol client is installed?  If this isn't the case, add (the inf file must be in the folder that player is installed).

  • USB port from a digital Multiport card will not read the external SSD drive. Right USB - c for the USB adapter works fine.

    USB port from a digital Multiport card will not read the external SSD drive. Right USB - c for the USB adapter works fine.

    It's a new 12 '' MacBook

Maybe you are looking for

  • Subtitles on by default in Netflix

    Subtitles are always on by default when I use Netflix.  They are disabled by default in the Apple TV settings, but I still have to ask Siri to turn them off when you use Netflix.  Any thoughts? Thank you! This will not occur in any other application.

  • Bug reference IMAQ turn?

    Version 8.5 of vision in LabVIEW 8.2 When calling most of the functions of the vision, the function returns the image, even if an error has occurred previously, but IMAQ rotation function does when there is an error.  It of an oversight or is it desi

  • Real time combine a XY grafica

    Buenas noches a todos Antes that nada espero y todos is hayan pasado well en esta semana holiday bueno mi duda ahora're siguiente intento realize una con Graficas a solo intrigues donde por el lado of the amplitude me muestre "carga" y por el lado de

  • How can I remove yahoo Messenger? I have windows XP

    I keep getting unwanted Yahoo messenger pop up windows. I don't want Yahoo messenger.

  • Question about the order of evaluation of the clause WHERE CLAUSE when the Oracle OF the syntax used to join tables

    HelloOracle version: 11.1.0.7.0 - 64 bitI read the documentation online at joins. The page is avialable here: joins atMy question is about the join order of evaluation of the conditions in clause and the conditions of thoseare not the join conditions