DV7-6c95dx: installation of windows 7

Acquired over machine without HDD - put in new hard drive

1. have a windows product key, but does not check

or-

2. can I reinstall windows from a set of recovery discs

Hello:

Microsoft has removed the unlimited access to download W7 in February of last year.

To download W7, you must have a full commercial product key.

The key on your laptop case is for an OEM of W7 edition.

If you have any disk installation of windows 7 Home premium, you can use that and the product key on your PC.

If you do not, you can still order a set of recovery discs for your laptop on the link below...

http://support.HP.com/us-en/mediaorder/HP-Pavilion-dv7-6c00-entertainment-notebook-PC-series/5169332/model/5210873/softwareitem/679228-002/STEP1

Tags: Notebooks

Similar Questions

  • HP Pavilion dv7-6c95dx - do not pick up the Samsung 840 Evo SSD for clean installation

    Hello

    Laptop model: HP Pavilion dv7-6c95dx

    I bought a new Samsung 840 Evo 500 GB SSD and going on to replace the main HARD drive. Tried to install Windows 7 Ultimate on it using the USB bootable Win 7, it loads the installation and starts ok and then he asks to load the driver for any device and gives you an analysis of the option to see if there is any storage device to select for installation. It clearly shows that it does not pick up the SSD.

    Unfortunately the bios insydeh20 V3.5 has no possibility of even check if it is detected or so.

    What do you think is the problem? The BIOS update would solve this issue? or is there any other work around that.

    Thank you

    Mike

    Before I went ahead with the method you suggested, I tried updating the Bios with the latest version and voila... system picked up the SSD and all is well now.

    Thank you

    Mike

  • HP Pavilion dv7-6c95dx: HP Pavilion dv7-6c95dx Windows 7 x 4 Can not find Hard Drive

    I have a HP Pavilion dv7-6c95dx. I put in a new hard drive. I can't get Windows 7 x 64 to recognize during the installation. I tried the Intel Chipset drivers on the HP download site for my laptop. I also tried the x 64 drivers from the Intel website: http://downloadmirror.intel.com/24293/a08/f6flpy-x64.zip.

    I tried with the original hard drive in and Windows 7 does not recognize either.

    Any ideas on how to get Windows 7 to recognize the drive?

    Brian

    I understood why Windows 7 does not recognize the hard drive. I tried to install Windows 7 from a USB key. I burned the BONES on a dvd and booted on the dvd and he found the hard drive. It is trying to install Windows 7.

  • HP pavilion dv7-6c95dx: camera and fingerprints does not.

    I use the Hp pavilion dv7-6c95dx (win 7-64 bit). It's the old product. Now, I don't use camera and fingerprints. I'm trying to find the driver but I don't know where I can download and what is it (drivers for camera and fingerprints). Pls show me the link to download. Thank you very much!

    @hung29kt

    Your English is very good.  The smile.  Unfortunately, it's the only language I speak, so we are limited.  Can I use Google Translate if you want / need to send information in your own language at home.

    Problem webcam and HP SimplePass troubled can be tricky - when they don't work, it may be easy to fix - or terrible and difficult to understand.  I hope I can help.

    ===============================================================

    The camera can be other problems.

    The Support of your laptop troubleshooting Web site section:

    HP Pavilion dv7-6c95dx laptop / troubleshooting

    Help for Webcam / camera:

    Article > Webcam / camera

    Look at this document for help and suggestions:

    Laptop HP, Touch and PC AiO - Webcam troubleshooting (Windows 7)

    What happens if nothing helps?

    It is possible that the tiny wires in the camera are broken.  If nothing is done to fix the camera, you may need to consider that the wires that connect the camera to the computer are loose or disconnected (broken).  If that's true, in other words, if the wires are broken or disconnected, the webcam / camera will not work.  This isn't good news, but this is not cheap having fixed.  You can take the computer to a local computer repair center, the confidence of having this kind of work.  HP can also do this repair.  If you have the skills, you can do the repairs yourself.

    ===========================================================

    HP SimplePass

    Reboot = redΘmarrer

    HP SimplePass is sensitive to "other software" on the computer.  Everything must be "up-to-date" and ready to go.

    For example, you want to have your update of the .NET Framework, you want to have your updates from Windows Update (in the last month or almost) and you want to make sure that you do not have a shortage of pilots.

    For example:

    Page driver your computer laptop Support site:

    Category: Software - security > HP ProtectSmart hard drive Protection

    sp57232.exe

    Category: Software - Solutions > HP framework

    sp56878.exe

    The short answer:

    Preparation

    • Stop all programs: browsers, games, Applications, etc.

    Control Panel > display icon > System > System Protection >

    Select (highlight) your main drive (C)

    Click on Create a Restore Point

    Installation of the driver and HP SimplePass

    • Download the Driver of sensor of validity on your computer:

    sp56403 validity sensor Driver W7 - 64 bit V4.3.301.0

    • The pilot will probably download in your "Downloads" folder
    • Install the driver of sensor of validity by 'double click' on the name of the file
    • Restart the computer and log in

    Next

    • Download the version of HP SimplePass program 5.4.0.402 on your computer:

    sp58600.exe

    • Probably, the package will be downloaded in your "Downloads" folder
    • Install the HP SimplePass program in "double click on the file name.
    • Restart the computer and log in

    See if you can get HP SimplePass program to start

    ===============================================================

    HP SimplePass Version 5.4.0.402 is an older version of the program SimplePass.  Sometimes it works, sometimes it doesn't work for everyone.

    There is a newer version of the HP SimplePass program drawn up by the same company (AuthenTec) that might work.

    If you want to try it, follow these steps:

    • Download this program:

    sp63224 HP SimplePass V6.0.100.276 Win7-8

    • Probably, the package will be downloaded in your "Downloads" folder
    • Install the HP SimplePass program in "double click on the file name.
    • Restart the computer and log in

    When you see a post that will help you,

    Who inspires you, gives a cool idea,

    Or you learn something new.

    Click the 'Thumbs Up' on this post.

    Click on accept as Solution when my answer provides a fix or a workaround!

  • DV7 6c95dx

    Hi I have dv7 6c95dx and sometimes I would shut my computer it would take about 5 minutes, then a blue screen to say "a problem has been detected and Windows has shut down to prevent damage to your computer" my Comuter is the HP Pavilion dv7-6c95dx Entertainment Notebook PC is a brand new computer and this happens for me 3 times. Any help?

    Hello

    How to run Windows in selective startup (Clean Boot)...

    1. Click Start, click Control Panel, click System and Maintenance, click Administrative Tools and then double-click on the System Configuration.

    2. click on continue or provide administrator credentials if prompted.

    3. click on the general tab, and then click Selective startup.

    4. under Selective startup uncheck load startup items.

    5. click on the Services tab, check the skin all Microsoft services, and then click Disable all.

    6. then click on start then click on disable all the.

    7. click on apply, then click OK and restart.

  • Pavilian dv7-6c95dx rejection of correct user password

    Pavilian dv7-6c95dx windows 7 64-bit (out of warranty).  Computer turns on normally and asks user password.  Attempts to enter the CORRECT password (I forgot it) for user access results in the following message: "user profile service service has no logon.  User profile cannot be loaded. "Then, I offer only an OK button.  Clicking OK only results in the whole of the procedure of starting all over again.  I get a "wrong password" notification when I fast type in a wrong password.  Of course, I'm using my other computer for this application for assistance.  steveamos

    Hello

    You can try the following.

    Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

    Another option if the above does not help is as follows.

    Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

    Kind regards

    DP - K

  • HP Pavillion DV7 6154ea Questions on windows 8, driver etc.

    Recently bought a laptop HP Pavilion DV7 6154ea.

    paid allocate money for her that she was second hand it and without warranty.  After receiving it now looks that the choice was made, great laptop. Just having a few problems with the understanding of the functioning of windows 8.

    the laptop on the back label indicates a key of windows 7, meaning that it was sold to the original owner with windows 7.

    The laptop was sold to me with the installation of Windows 8 Pre.

    The seller just re installed windows 8, wipe the hard drive before.

    My problem is that I do not know if I have to download any dirvers for windows 8? asked the seller who has no idea about the drivers. I guess they were already installed by front cd.

    Secondly, there is no drivers windows 8 available for this model? is that going to be a problem?

    need to know your thoughts as soon as possible, as I might be able to return the item for a refund if I act fast enough!

    try to put in place the laptop properly before putting it to use.

    I also would like to access the BIOS under windows 8 to change the graphics card options that the laptop comes with the 2 graphics card. I read that if it's done auto instead of permenantly on less heat is produced. However, these instructions are for users of windows 7.

    need help, advice on the use of this laptop. Really don't want to damage anything so scared to touch even if it starts perfectly. uncertain about the drivers, the correct graphics settings on windows 8, its my first time using windows 8.

    Thanks for your time

    You are the very welcome.

    Exit the BIOS settings only.

    When you run Windows update utility under optional updates, you can see what presents itself.

    If you see an Intel HD graphics driver update, right-click on it and select hide.

    I doubt that you will ever see a graphics amd update driver, but if you do, you can do the same for that too.

    The optional updates will never install unless you check them and add to the list of installation.

    Concerning the drivers, you need only to install the drivers for all devices listed in the device with the little Manager! brands next to them (in the category other devices).

    If the graphics drivers are not installed, you will see two adapters vga standard listed under the category of display cards or you will see them with! also marks next to them.

    If you have an English version of W7 and can read all 25 characters of the product key of W7 on the bottom of your PC, you can make your own plain W7 installation media and use the product key to activate it if you don't want to buy a recovery disc for your model.

    Here is the link to the W7 x 64 Home Premium SP1 ISO file.

    http://MSFT.digitalrivercontent.NET/win/X17-58997.ISO 2147483647 English Windows 7 Home Premium x 64 X 17 - 58997.iso

    Make sure you get all the 3. XX GB of the file to download.  Sometimes he says full download, but you do not have the entire file to download.

    Either use the ISO file, burn option in your burning software DVD to burn the ISO to a DVD file, then the ISO file, burn option will also make the bootable DVD.

    Or you can use the Microsoft tool on the link below to transfer the ISO to a flash USB 4 GB or DVD drive.

    This tool will also support bootable.

    http://www.microsoftstore.com/store/msusa/HTML/pbPage.Help_Win7_usbdvd_dwnTool

    You can install the W7 x 64 drivers and software support page and the driver of your laptop.

  • Need drivers for the SATA hard/controller on the dv7-6c95dx disc.

    Need drivers for the SATA hard/controller on the dv7-6c95dx disc.

    We load Windows 7 Enterprise on these newly purchased laptops, but do it have not the required appropriate drivers detect the hard drive on them. Impossible to find on the HP website.

    You can refer to a completely different question here, Marty. I was installing to a flash drive and it turns out that my install media has been connected to ports USB 3.0 on the left rather than right 2.0 ports. Moving to the ancient ports of 2.0 has solved my problem. Good luck.

  • Mac lost during the installation of windows

    When installing windows on a MAC, I deleted my partition mac completely and I am now left with windows 7 to my mac book air. Y at - it an option to install mac, I don't mind losing the windows partition

    Hello smarthala,

    Thank you for using communities of Apple Support.

    I see that you deleted by mistake your Mac partition during the installation of Windows. The partition itself deleted or was it the Mac OS that has been erased, leaving an empty partition?

    If the latter, you can reinstall OS X from OS X Recovery. See this article for how that should be done: On OS X Recovery
    Otherwise, you can use Internet recovery (Command-Option-R, as opposed to the command-R) to repartition the entire hard drive and install the version of Mac OS X provided on your Mac. Who is finished, you can upgrade to El Capitan via the App Store > bought.

    Best regards.

  • Bootcamp: Installation of Windows 10 USB cannot find bootcamp partition

    Hello

    I deleted the old partition 10 windows using bootcamp, upgrade of the space itself.

    I ran BootCamp again to set up windows 10 pro, as I had already installed on my end 2012 21.5 "iMac and the wizard successfully install on a USB stick, my Windows 10 ISO and any software downloaded from Apple.

    After restarting, start the configuration of Windows 10 until the selection of the partition.

    I, as the statement says, choose partition, BOOTCAMP and Format. Then I click Next, but the Windows says:

    "I can't create or find a partition...". »

    So I can't install it... What is going on? How can I fix this as never before appeared?

    Thank you

    Disconnect the external storage, perform the following two procedures and then only connect the USB Flash drive containing the installer W10.

    Reset the management system (SCM) controller on your Mac - Apple Support

    How to reset the NVRAM on your Mac - Apple Support

    See also Boot Camp: "we could not create a new partition or locate one" alert during the installation of Windows 8 - Apple Support .

  • delete the partition after a failed installation of windows 10

    Hello world

    How is it possible to delete partitions, if in disk utility, there is no possibility to click on the '-' key?

    So I made a failure (several) attempts to install windows 10 on my new iMAC.

    I could download an ISO of windows and start the bootcamp assistant.

    In the last attempt of last night, I selected the bootcamp in windows installation partition, however, installing windows said it was impossible to read the hard drive.

    I then re-formatted this partition (BOOTCAMP) in the installation of windows, and after that, still could not read.

    Then, I deleted the bootcamp partition in windows and re-created a partition on "unallocated space" in the windows installation.

    Installing windows 10 still wouldn't move forward then I've bailed out and went back to OS X with the hope of turning it back on (again) by deleting partitions.

    I was unable to delete the Mac partition.

    Then, I deleted this partition (the one original bootcamp) and reformatted as OS x journaled. At least now, I can see the Partition.

    However in Diskutil, I was then impossible to delete this Partition. There is also a small partition 16 MB that cannot be erased.

    Wizard bootcamp will be past a pop up station: the startup disk cannot be partitioned or restored to a single partition.

    So I will now try to delete these partitions (the boy and the training camp original one) merge into the original and give then installing bootcamp, another go when I have a lot of energy!

    any help would be appreciated. I'm a little cautious to use Terminal command lines for fear of ruining my new computer.

    concerning

    Evan

    1. your iMac has a Fusion drive?

    2. don't mix to disk utility and Wizard of BC. They can lead to a host of issues.

    3. If you do not typos in the Terminal, they provide much more rich in detail. You have a Time Machine backup, put in place?

    4 can you post the output of the following Terminal commands?

    diskutil list

    Cs diskutil list

    sudo TPG - vv - r see the/dev/disk0

    sudo fdisk/dev/disk0

    The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

  • Satellite C855 - installation of Windows 7 suspended

    I am trying to install Windows 7 on a Toshiba Satellite 855.
    At present, we have 8 Windows is installed. The computer runs about 05:00 and 23:00 without obvious problems. for example no 'blue screen of death '.
    Secure boot is disabled and the boot mode changed to UEFI to CSM.
    The computer starts correctly on DVD player and the message "starting Windows 7", then on the logo.
    Shortly after, the computer will not quiet i.e. no noise among readers and seems to stop and nothing happens. (we left on during several hours, just in case where)
    Different disks of Windows 7 have been tried with the same result.
    We also tried exchanging the hard drive completely and replacing it with a new drive with no success.
    The computer is now running Windows 8 back without any obvious problem, but we want to run Windows 7!
    Help!

    Have u tried to boot the installer of windows 7 on USB?

  • Installation of Windows XP on new machines

    Hey, does anyone know if the latest machines Toshiba supports the installation of Windows XP,
    It is commonly accepted to support only Windows 7 and OS later?

    I tried to install Windows XP Pro SP3, 2008 version on the machine Satellite C660 released in 2011.
    and he crashed at the beginning of the installation. Is it possible that the Bios prevents
    forcing to work with Win 7?

    Or some drivers are missing in XP installation package, which makes XP incompatible with HW?

    On this forum, you will find number of threads where you can find answer to your question and also good explanation how to do to install Windows XP Home edition on the new laptop models.

    > I tried to install Windows XP Pro SP3, version 2008 on the satellite C660 released in 2011.
    and he crashed at the beginning of the installation.
    I assume that it happens because of lack of driver SATA. It must be loaded with F6 before installation of WXP begins. You can also create the installation disk of Windows XP Home edition with the integrated SATA driver. How to do this you can read
    http://APS2.toshiba-tro.de/KB0/TSB7B020R0000R01.htm
    http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

    If you have any other questions you are welcome.

    By the way: you have created recovery DVDs before you started the installation of Windows XP Home edition?

  • Satellite Pro 4300 series installation of Windows 2000 Professional

    Hi guys!

    I was given a 2nd hand Satellite Pro 4300 notebook PC series of my brother. Its shows be quite slugglish (over the start time of 20 minutes). I think I'm a format and a new installation of windows 2000 (windows 98se running sound) may be useful. However, I don't have the original recovery disk, although I own an original copy of Windows 2000 Professional.

    Would it not be possible to do a full format and install windows 2000? Or would I meet problems, for example with driver problems, later? I know computers cell phones can be a bit of a nuisance when it comes to facilities OS!

    Any help and advice would be much appreciated!

    Thank you!

    FONZ

    Hello

    Your machine should work very well with Win2K - Toshiba have drivers available for download.

    Kind regards

    Nick

  • BootScreen shows two installations of windows

    Trial and error, try to install windows via Bootcamp 10 in my MacPro 2008 (3,1) caused two windows appear when I press Alt/Option to the start-up of the facilities. None of them works. I El Capistan SSD drive is mounted on a map of Apricorn speed X 2 with another plugged on SSD card, and I have four data disks in my 4 bays.

    How can I remove the two Installations of Windows to appear? So far, I have attach each disc EFI of my order from command line "utildisk list" in accordance with this article and removed my reEFInd folders.

    Hello Pascal88,

    Thank you for using communities of Apple Support.

    I see you are trying to install 10 Windows on a Mac Pro (2008).  Your model of Mac does not support Windows 10, those listed below support it:

    Computers Mac taking supported Windows 10

    The following models of Mac supports the 64-bit versions of Windows 10 when it is installed using Boot Camp. About this Mac to see what Mac you have, then check this list to see if it supports Windows 10.

    • MacBook Pro (retina, 15 inch, mid-2015)
    • MacBook Pro (retina, 13 inches, early 2015)
    • MacBook Pro (retina, 15 inches, mi 2014)
    • MacBook Pro (retina, 13 inch, mid-2014)
    • MacBook Pro (retina, 15 inches, end of 2013)
    • MacBook Pro (retina, 13 inches, end of 2013)
    • MacBook Pro (retina, 15 inches, beginning 2013)
    • MacBook Pro (retina, 13 inches, beginning 2013)
    • MacBook Pro (retina, 13 inches, end 2012)
    • MacBook Pro (retina, mid-2012)
    • MacBook Pro (13-inch, mid-2012)
    • MacBook Pro (15-inch, mid-2012)
    • MacBook Air (13 inch, early 2015)
    • MacBook Air (11 inch, early 2015)
    • MacBook Air (13 inches, beginning 2014)
    • MacBook Air (11 inch, early 2014)
    • MacBook Air (13 inch, mid 2013)
    • MacBook Air (11 inch, mid 2013)
    • MacBook Air (13 inch, mid-2012)
    • MacBook Air (11 inch, mid-2012)
    • MacBook (retina, 12 inch, early 2015)
    • iMac (retina 5K, 27 inches, end of 2015)
    • iMac (retina 4K, 21.5 inches, end of 2015)
    • iMac (21.5 inch, end of 2015)
    • iMac (retina, 5 k, 27 inch, mid-2015)
    • iMac (retina 5K, 27 inches, end of 2014)
    • iMac (21.5 inch, mid-2014)
    • iMac (27 inch, at the end of 2013)
    • iMac (21.5 inch, at the end of 2013)
    • iMac (27-inch, late 2012)
    • iMac (21.5 inch, at the end of 2012)
    • Mac mini (late 2014)
    • Mini Mac server (end of 2012)
    • Mac mini (late 2012)
    • Mac Pro (end 2013)

    Use 10 Windows on your Mac with Boot Camp

    The latest version of Windows, which can be installed via Boot Camp on your Mac Pro 2008 is Windows 7.

    Install Windows 7 and previous versions on your Mac using Boot Camp

    Take care.

Maybe you are looking for