Dv7 want: OS after the failure of the HD install

Similar Questions

• computer inheirerted of father and you want to restore the factory installed vista system but do not know the password of admin fathers

  computer inheirerted of father and you want to restore the factory installed vista system but do not know the password of admin fathers

  Hello

  You should not have a password to reinstall Vista.

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  There are several methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• After the clean install of windows 7, it gives an error saying that there is a problem in the hard drive.

  * Original title: hard drive

  I have a lenovo laptop, processor Intel i3, 500 GB hard drive. After the clean install of windows 7, it gives an error saying that there is a problem in the hard drive. I ran chkdsk looking for bad sector and its display 6000 KB in bad sectors. After completing the audit when it began to restart its stuck when the windows logo appears. What should I do? Reinstall the windows help?

  Run the hard drive HD diagnosis extended CD scan manufacturer to know with certainty the State of the reader.  If your brand has no bootable diagnostics in the link, use Seagate Seatools burned onto CD or SeaTools for a USB key .  Follow this with a full check disk command from the installation media kicked prompt know with absolute certainty the State of the reader.  If he repeated the errors after you run the two tests twice, I replace it or at least keep everything backed up in real time.

  If by chance the drive past diagnosis then compares the steps you've done with the best possible Clean install Windows 10 in the link, you can do more if it varied too - especially if the partitions were not deleted during install.  If you do then I additonally run own Diskpart command command line of the punt media accessible to the first screen after startup by pressing SHIFT + F10 keys, or through the repair your computer on the second screen.

• New R13 - R7 - 372T: Tools missing after the clean install

  Hello!

  I got my R13 - R7 - 372T today and I want to do a clean install of Windows 10. I checked the Acer site and saw that most of the drivers are available on the download page, I also found the abApps (Portal of Acer and) download ( https://www.cloud.acer.com/ops/downloads) where I need those who one day but its seems that some of the pre-installed tools/applications are missing. How can I reinstall the following tools if I wipe my device? (I have already created a backup of the recovery partition but I need regular installation files):

  -Acer care center (edit: I found a link for verification of compatibility to download it here: http://www.acer.com/ac/en/MY/content/software-acer-care-center )

  -Acer Hover access (edit: found the link for flight stationary access here: http://go.acer.com/?id=18022#_ga=1.267060686.114307318.1458377954 but not sure of the version)

  -Dolby X 2 Audio Windows App

  -Acer Audio utility invert (makes that actually do?)

  I'm a little disappointed that Acer does not offer those by convenient download as the rest of the drivers and application of quick access for example. So where can I download those, or how I at least check out them of the recovery media that I created?

  Edit: Looks like after some experiences of most of the tools I mentioned is unnecessary (so I removed them from the list) or available by searching around for a while. However the 2 above mentioned utilities are still missing.

  Thank you!

  Alex

  Dolby

  Go to Manager of device/Audio inputs and outputs / RealTek High Definition Audio speakers / right click and uninstall.

  Go to C:/drivers/setup and install. Otherwise it

  Audio

  Realtek

  Audio driver

  6.0.1.7288

  386,0 MB

  04/11/2014

  Download

  Don't restart yet.

  Go to PCEE4/Dolby Home Theater / double click and install/reboot.

  Audio Acer utility to invert

  I don't know what it is. Nobody seems to know.

• HP pavilion dv 6-2070eo: unknown unit in the device after the clean install Manager

  My product: HP Pavilion DV 6-2070eo

  Product number: VJ346EA #UUW

  Windows 7 Home premium 64-bit

  Hi HP experts...

  I just did a clean install of windows and installed all the drivers - installed Microsoft security essentials - windows update updates entirely, but in Device Manager it is a unknown unit with a yellow icon. When I double click on the unknown unit, it says location on bridge isa standard pci and beneith which - drivers for this device are not installed (code 28). What kind of driver I'm missing? Now, I wanted to check for other drivers, but I couldn't find any other drivers because the driver download page are not available at the moment on the site of HP

  Best regards hpenvy1

  Hello:

  Yes, that's what I needed.

  You need the driver for this device...

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_79533_2

  You don't need to worry about the EEG W10 icon.

  You can download W10 directly from Microsoft.

  http://www.Microsoft.com/en-us/software-download/Windows10

  Download the 64-bit installation program and do the immediate upgrade option.

  Then you can go back and make the W10 DVD or USB flash drive.

  I'm not very confident that your laptop can run W10.

  Most likely, audio, graphics and without wire do not work and there is no drivers to make them work.

  But you can give it a shot and see what happens.

• No boot device not found error on R610 after the OS installed

  Hello

  Then I configured the Raid 1, installed Windows server 2012 R2 from USB. But when the system reboots after the installation it says it us no available boot device. I tried to start it manually by the raid controller but still said the same thing. The boot is BIOS.

  I'd appreciate jf you could help me look on this site and running.

  Thank you

  Feri

  Hi Robert

  Thanks for your message, I solved the problem

  The boot sequence was set correctly and I also tried to boot from the RAID directly, the problem was the firmware. I've updated all the firmware and that fixes the problem.

  Thanks for your help

  Faya

• Windows 7 key invalid product after the re - install?

  I recently had to make a new re-install of Windows 7 Home Premium on my laptop using my USB and an iso I downloaded from Microsoft.  Everything was going great until yesterday when suddenly a box appears saying that my Windows could not be enabled because the key is not valid.  I used the product key that is located on the Windows sticker on the back of my laptop, so I know that it is legitimate and it seems rather strange that this would begin past 2 weeks after the new facility instead of immediately.  If anyone can shine a light on it, I'd appreciate it.

  Well, the errors disappeared, but you are still not activated, try the activation of the phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Envy 17: How to change the graphics unit after the fresh install of Win 7?

  How can I switch between the internal and the discrete graphics unit?

  I installed the drivers recommended from HP website, but I don't have the ability to switch.

  I recognized with dxdiag that the system uses Intel graphics unit only, but I want to use the AMD graphics unit.

  I can't install the CCC of AMD, because she claims that no device is available. So I checked in the Device Manager if the AMD GPU is recognized, and it is not! All the drivers are installed.

  The BIOS is limited and I am not able to change the graphic in the BIOS.

  So I need your help.

  Please give me a solution for this problem.

  Thanks in advance for your support!

  SysInfo:

  Model: HP Envy 17-3080ez (Switzerland)

  REF: A2Q30EA #UUZ

  OS: Windows 7 Ultimate x 64 (clean)

  Fixed a problem. Just reinstalled the whole packs AMD and did a restart. Then install the factory rider once more, and everything works fine!

• Pravilion dv7 series replaced after the recovery disk hard drive failure

  I tried to use the portion of my drive recovery hard when my laptop Pavilion dv7-4173 US could not operate.  After trying the hard drive recovery part several times I got an error message saying that the bootmgr is missing. I tried using the recovery discs I got to the store, I bought the computer before taking it home, and they failed. They worked up to 32% and then stopped.  I took the laptop and recovery (6 discs) disks to the tech Department of another retail store. After several days, I learned the recovery disc where no good/damaged. When I contacted the store bought told me that I had to bring in the laptop and recovery disks. They replaced the hard drive, saying: that was the problem, but do not partition. They decided to classified until the system OS of Windows 7 Home Premium 64-bit for Windows 7 Professional 64 bit., but did not try the recovery disks. Can I use the recovery disk, they made me, if are good restore the laptop back to factory new?  I know he will place the operating system Windows 7 Home back on the computer, but I want that all return provided with computer programs. I'll be able to upgrade the Professional operating system? I have the disc of Windows 7 Professional.  If my restore disk will not work, can I use the recovery disc, only 2 discs instead of 6, I can buy from HP and then move on to professional?

  Thank you.  Computer to factory fresh.  Just update software and then go to Windows 7 Professional

• Satellite A210 - 127 (PSAELE) cut off and BSOD after the fresh install of Win 7

  Hello Toshiba Support Forums.

  I installed Windows 7 Ultimate x32bit 2 weeks ago and I have problems around him.
  The only driver I have intalled was ATI video card driver and touchpad driver to make it work.

  The problem is sometimes the laptop shutsdown itself and after I turn it back on it says blue screen and some other information you need, but I closed it.

  Also im gamer and sometimes when I play the game it shutsdown again. When I use Google Chrome or Firefox, the browser hangs and makes the pc of the room with her for at least 10 min. it is really bad and I also want to set.

  Also, I want to ask about memory card reader because I insert a card in the reader, but it does not work I think I need a driver for it but is not in the drivers Toshiba Web page.

  Thank you very much!
  If you need any other information that I will deliver to you order for ifx these annoying problems!

  > The only driver I have intalled was ATI video card driver and touchpad driver to make it work.

  Where did you find this ATi driver?
  It could be possible that the installation of this driver ATi the BSOD.

  My girlfriend has the same laptop Satellite A210 with an ATI Mobility Radeon HD 2400 graphics card. The driver version is 8.632.1.2000 and the laptop is preinstalled with Win 7

  It works perfectly without any BSOD.

  By the way: the cardreder works too... you could take a Vista driver or the driver put the A300 series too

• How to get the software HP Coolsense works again after the clean install (win7)?

  I recently purchased a DV7 6014TX and upgraded to an SSD and a clean install of the retail version of windows 7 64-bit. I want to know how do HP Coolsense works again? I saved the folder drivers of my original hard drive SW and I so all people. SP52814, I downloaded the installer coolsense, but it doesn't seem to work. Any input on this would be highly appreciated.

  Coolsense also requires HP Support Assistant see links below

  HP Notebook PC - on CoolSense technology

  Download

  HP Support Assistant

• Blue screen of death after the update installed at startup upward.

  I have windows xp sp3 after installed updates don't know which ones, because the installed when I stop and 52 of them there I now get a blue screen of death which says:

  Stop: c000007b {bad image}

  The application or DLL? \c:\windows\system32\winsrv.dll is not a valid windows image. Please check this against your installation diskette.

  I can't go to the safe mode get the same error and same with the last known good configuration. I can't even to safe mode command prompt, system, or debug mode recovery still giving me the same error. I repaired windows 3 times already and the same thing happens each time after that some update that I don't know he messes all this. Give me advice. I have antivirus Iola system mechanic. I think just to wipe the entire disk and do a clean install if you do not have anything else to tell me I'll do it, but I don't know if that even the problem will be solved because there seems to be a problem of windows software update. I also notice from the internet explorer 7 installed it stops working a few flashes upwards on you whenever you try to open it up if it's maybe part of the problem too. I do not plan to let internet 7 install go into all this time.

  Install the updates one at a time or 5 at the time may not be a bad idea.  Then when it breaks watch you and see if one of those is eager to replace your winsrv.dll file.

  You said you DO or DO NOT have to System Mechanic configured to run at startup?  Sometimes after installation of the updates, who see the new files (and if they are obsolete), can interpret the new legitimate files to be a threat.  If you could get started and uninstall that (at least temporarily) that would eliminate this possibility of this equation of many variables.

  The Dell has a number of service tag sticker and if so what does it say?  You can search for things by service number

  You should make a bootable CD of XP (no XP media required) Recovery Console.

  You see, Microsoft support engineers won't tell you how to do this either - since there is not an article of KB Microsoft Bing and link to.

  If you have a SATA drive, which will give you another challenge because you need to maybe get into BIOS and temporarily change the disk other than SATA configuration mode so the Recovery Console will be able to see, replace the suspicious winsrv.dll file, change the SATA drive and reboot...

  First, do the XP Recovery CD of Console and if you are able to use a system of work to ensure that the CD you made at least boots (you don't have to "do" something with it), which would be a good thing.

  Here's how:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

• Satellite L655-1DV - lost partition after the fresh install of Win 7

  Hello

  I have a Toshiba Satellite L 655 - 1DV and yesterday I installed windows 7-32 bit and all the drivers (clear).
  My problem is that after installing my partition (the one with the gbs much) was not recognized in windows.

  Management of the computer, it says I have 450 GB
  https://DL.dropboxusercontent.com/u/100247419/6655554.jpg

  but I have only 31 GB
  https://DL.dropboxusercontent.com/u/100247419/ttttt.jpg.

  How can I solve this problem?
  Thank you in advance.

  Hello

  How did you install Windows 7 on HARD drive?
  Format you the HARD disk during the installation process?

  Disk Management displays only a single partition. Which is really strange because even if the HARD disk should be formatted, you should get at least two partitions (a small partition for restore Win 7 files) and a larger system partition C

  I think you should try to change the size of partitions in disk management C.
  Right click on the partition and decrease the size of the partition. Then you could create a new partition and could mark it is active.

  It would be very interesting to know how the partition is displayed in Windows Explorer.

• Satellite U840-10: cannot configure Intel IRST after the fresh install of Win 7

  Hello

  I formatted my U840 - 10 M and did not touch in any partition in addition to C:\.

  However, after all drivers installed, I'm still not able to open fast storage software from intel to set up, because just after installing, it does not appear in the programs or any other place.

  I think raid installation is not activate more duo in the format.

  How can I setup again my raid (or intel rapid storage)?

  Thank you

  Hello

  The [driver Intel Rapid Storage Technology | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 198 & selProduct = 7520 & selSh ortMod = null & language = 13 & selOS = 30 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 4 & ID = 83170 & OSI D = 30 & driverLanguage = 42] so the [Software Intel Rapid Start Technology | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries =] [198 & selProduct = 7520 & selSh ortMod = null & language = 13 & selOS = 30 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 4 & ID = 83169 & OSI D = 30 & driverLanguage = 42] can be downloaded from the Toshiba UE driver page.

  But I m interesting how you installed Windows 7?
  Have you activated the AHCI mode in the BIOS and you added the [disk RAID | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 198 & selProduct = 7520 & selSh ortMod = null & language = 13 & selOS = 30 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 4 & ID = 84223 & OSI D = 30 & driverLanguage = 42] while the Windows 7 Installer?

• After the clean install kernel panic

  Hey people,

  Gone through these forums for a good while but the first assignment in time...

  Small story is that I have a macbook pro 2010 mid runs the mavericks, 8 GB ram, 1 TB SSHD. My mac suddenly rebooted and then got stuck in a reboot loop, screen display multilingual "your computer restarted because of a problem", I understand that this is a possible kernel panic.

  After much tinkering, I did a clean install of Mavericks on my player (I did a few times before) and now my mac still restarts regularly... the last crash report is less to...

  Thanks to everyone who has all the answers!

  Anonymous UUID: 18795270-0A64-9C43-DC5A-D2621405E611

  Mar 23 11:35:16 Feb 2016

  panic (cpu 0 0xffffff80032526cf appellant): "an element of the liberated area has been changed: expected 0xdeadbeefdeadbeef but found 0xdeadbeebdeadbeef, wicks 0 400000000 changed x, 8192 2704 offset in the area: buf.8192"@/SourceCache/xnu/xnu-2422.115.4/osfmk/kern/zalloc.c:461.

  Backtrace (CPU 0), frame: return address

  0xffffff81050d3480: 0xffffff8003222f79

  0xffffff81050d3500: 0xffffff80032526cf

  0xffffff81050d3560: 0xffffff8003251dc9

  0xffffff81050d3660: 0xffffff80033c8daa

  0xffffff81050d36c0: 0xffffff80033c879b

  0xffffff81050d3790: 0xffffff80033c7a61

  0xffffff81050d37d0: 0xffffff80033c7c37

  0xffffff81050d37f0: 0xffffff80035584b2

  0xffffff81050d3850: 0xffffff80035942dc

  0xffffff81050d3870: 0xffffff8003595303

  0xffffff81050d3910: 0xffffff8003591455

  0xffffff81050d3a20: 0xffffff800355ddc0

  0xffffff81050d3bb0: 0xffffff800355711f

  0xffffff81050d3da0: 0xffffff80033fff0c

  0xffffff81050d3e50: 0xffffff80033edc36

  0xffffff81050d3f50: 0xffffff8003640c63

  0xffffff81050d3fb0: 0xffffff80032f4176

  Corresponding to the current thread BSD process name: mds

  Mac OS version:

  13F34

  Kernel version:

  13.4.0 Darwin kernel version: Sun Aug 17 19:50:11 CDT 2014; root:XNU-2422.115.4~1/RELEASE_X86_64

  Kernel UUID: 9477416E-7BCA-3679-AF97-E1EAAD3DD5A0

  Slide kernel: 0 x 0000000003000000

  Text of core base: 0xffffff8003200000

  Name of system model: MacBookPro7, 1 (Mac-F222BEC8)

  Availability of the system in nanoseconds: 61740424811

  last load kext to 13925356367: com.apple.driver.AudioAUUC 1.60 (addr 0xffffff7f8477f000 size 32768)

  kexts responsible:

  com.apple.driver.AudioAUUC 1.60

  com.apple.driver.AppleHWSensor 1.9.5d0

  com Apple.filesystems.autofs 3.0

  com.apple.driver.AppleTyMCEDriver 1.0.2d2

  com.apple.driver.AGPM 100.14.34

  3.5.13 com.apple.driver.AppleUpstreamUserClient

  com.apple.iokit.IOBluetoothSerialManager 4.2.7f3

  8.2.4 com.apple.GeForceTesla

  com.apple.nvidia.NVDAStartup 8.2.6

  com.apple.driver.AppleMikeyHIDDriver 124

  com.apple.driver.AppleHDAHardwareConfigDriver 2.6.3f4

  com.apple.driver.AppleHDA 2.6.3f4

  com.apple.driver.AppleMikeyDriver 2.6.3f4

  com.apple.driver.AppleSMCLMU 2.0.4d1

  com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

  com.apple.iokit.IOUserEthernet 1.0.0d1

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.driver.AppleHWAccess 1

  com.apple.driver.AppleLPC 1.7.0

  com.apple.iokit.IOBluetoothUSBDFU 4.2.7f3

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.7f3

  com.apple.driver.AppleMuxControl 3.6.22

  com.apple.driver.AppleBacklight 170.4.11

  com.apple.driver.AppleMCCSControl 1.2.5

  com.apple.driver.SMCMotionSensor 3.0.4d1

  com.apple.driver.AppleUSBTCButtons 240.2

  com.apple.driver.AppleFileSystemDriver 3.0.1

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1

  com.apple.BootCache 35

  com.apple.driver.AppleIRController 325.7

  com.apple.driver.AppleUSBTCKeyEventDriver 240.2

  com.apple.driver.AppleUSBTCKeyboard 240.2

  com.apple.driver.AppleUSBCardReader 3.4.1

  com.apple.driver.XsanFilter 404

  com.apple.iokit.SCSITaskUserClient 3.6.7

  com.apple.iokit.IOAHCIBlockStorage 2.6.0

  com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2

  com.apple.driver.AirPort.Brcm4331 700.20.22

  com.apple.driver.AppleUSBHub 683.4.0

  com.apple.driver.AppleFWOHCI 5.0.2

  com.apple.driver.AppleAHCIPort 3.0.5

  com.apple.driver.AppleUSBOHCI 656.4.1

  com.apple.driver.AppleUSBEHCI 660.4.0

  com.apple.driver.AppleSmartBatteryManager 161.0.0

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleACPIBut

  Model: MacBookPro7, 1, MBP71.0039.B0E of BootROM, 2 processors, Intel Core 2 Duo, 2.4 GHz, 8 GB, MSC 1.62f7

  Graphics card: NVIDIA GeForce 320 M, NVIDIA GeForce 320 M, PCI, 256 MB

  Memory module: DIMM0/0 BANK, 4 GB DDR3, 1067 MHz, 0x859B, 0x435434473353313036374D2E4D3136464B44

  Memory module: DIMM0/1 BANK, 4 GB DDR3, 1067 MHz, 0x859B, 0x435434473353313036374D2E4D3136464B44

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)

  Bluetooth: Version 4.2.7f3 14616, 3 services, 23 aircraft, 1 incoming serial ports

  Network service: Wi - Fi, AirPort, en1

  Serial ATA Device: ST1000LM014-1EJ164, 1 TB

  Serial ATA Device: HL-DT-ST DVD - RW GS23N

  USB device: ISight built-in

  USB device: Memory card reader internal

  USB device: Hub BRCM2046

  USB Device: USB Bluetooth host controller

  USB Device: IR receiver

  USB device: Apple keyboard / Trackpad

  Bus crush: k

  panic (cpu 0 0xffffff80032526cf appellant): "an element of the liberated area has been changed: expected 0xdeadbeefdeadbeef but found 0xdeadbeebdeadbeef, wicks 0 400000000 changed x, 8192 2704 offset in the area: buf.8192"@/SourceCache/xnu/xnu-2422.115.4/osfmk/kern/zalloc.c:461.

  expected 0xdeadbeefdeadbeef

  but found 0xdeadbeebdeadbeef

  Very likely bad RAM.

  Contact the company that provided your RAM upgrade and get them to replace your RAM.

  Within the forum, Curcial.com and MacSales.com (OWC) are the most recommended, for quality of RAM provided Mac and customer support should something go wrong.