dv7t 3300 i7 720 1st Gen 4 GB memory upgrade to 8B

Similar Questions

• 1st gen Apple Watch, OS3, workout card routing

  After updating my 1st Gen Apple Watch to OS3, I started a workout. He asked me to put my iPhone along for the calibration. I ended up taking a 4km walk, and after I saved a workout I noticed that in the summary of the workout he captured a map of my route to market together.

  I repeated the same 4km walk with the same way the next day and the following days (still wearing my iPhone) but is no longer provides a map of the route I took. No settings have been changed since the day 1 (e.g., location services, data enabled, etc.).

  Thoughts?

  My works fine as long as the iPhone captures GPS. Try going in to the workout on the activity of the app on the phone, check the time in the outdoor market, make sure it's your name and place an arrow of tracking. If this is not the case, try to repair your watch. and you check location setting on the phone too when you have the route that you will have time as well!

• Can I pair the 1st gen shows with a 6s performer 9.3.3

  I have just inherited a 1st gen watch but am unable to cross the first hurdle in trying to pair it with my 6 s (OS 9.3.3).

  I get the message that I should update my watch, but when I press on update now it checks updates, says my software of the watch is up-to-date with watch OS 1.0.1

  When I try to manually associate my phone asks a code 6 digit displayed (that I finally got to the fifth or sixth test) but then continues to ask me to update the software > check the update > says the watch OS is up to date etc.

  Is this all just not feasible or did I miss something?

  You must restore the watch to remove completely from the previous owner. And to do that you will probably need the owner previous Apple ID and password or make him open the watch.

  It requires the Apple ID and password from the previous owner. If you don't have it and can't get it, then the device is useless to you. Return it for a refund, if you can, or take it to an Apple store for an Exchange, I hope they will help you.

  Find my iPhone Activation Lock

  How to check for Activation lock before buying a second hand iPhone.

• IPad Pro 1st gen is no longer charging via rMBP end 2013.

  IPad Pro 1st gen is no longer the load via rMBP end of 2013 after the Ipad pro iOS 10.0.1 update

  can someone enlighten me on this issue? Apart from the iPad pro requires a larger draw of power than an iPhone.

  Thank you.

  I ask as its just designed by using redundant DuetDisplay and I need a complete battery to use the ipad as a second display now...

  Try alternative ways to charge your iPad here > If your iPhone, iPad or iPod touch won't charge - Apple Support

• 1st gen tv apple loses content

  I can see my 1st Gen Apple TV in Itunes and sync movies and music from the Apple TV. On the TV, I see everything so I guess it's hard disk. I can navigate and play on TV. If I disable Itunes on my computer, I don't see any content on my TV. I get the message that there is no music or movies on my Apple TV. He seems to act as if it's just the streaming as the next generation of Apple TV. I want to be able to access the Apple TV without streaming.

  Welcome to the Apple community.

  Looks that your library has become secondary (streaming only) library only (it is possible to enable sync off by ctrl-click on the ad for Apple TV in the devices list and choosing "turn off synchronization" in the context menu) and you must reconnect your library as a primary library.

  Go to settings > computers > your library on Apple TV, you can be told, you will lose all synchronized content, but you can sync it back later, you won't lose any content bought that has not yet transferred. And select settings > computers > connect to iTunes, note the access code that is displayed on the screen, click on the device in iTunes and enter the password when you are prompted.

• Mini iPad 1st gen replacement

  Hey everybody!

  I'm new here, so if this was already asked, wanting to send me the link instead. In any case, I had a Mini iPad 1st Gen of my mobile operator last October 2015. However, there was a problem with it's touchscree. It was so touching. I went to the Apple Store here in the Philippines and said they will be resets my device to see if the problem will disappear. He did... for a while. Now, he's back, so I want a replacement. However, Apple did extract iPad Mini 1st generation, right? So, I always will get a replacement knowing that my device is not sold in stores over? DRM for the answers.

  They still have units of replacement available services.

• Motorola Moto E(1st Gen) graphic lag

  While playing heavy games like asphalt airborne 8 or even candy crush I experience graphic shifts on motorcycle E(1st Gen). Is this due to the limitation of the RAM or limitation of the graphics card or completely another thing. I can compare with my bike G(1st Generation), it lags behind... Even sometimes when switching between applications.

  The E-bike is an entry level phone. He won't have the same performance characteristics as its more expensive brothers as the G and the X and the Turbo. I don't know what combination of RAM, graphics and CPU, resulting in reduced performance. Probably also a cheaper flash storage with lower performance.

• Can I connect a switch to my Airport Express 1st gen?

  Hi Experts,

  I was wondering if I'll be able to connect a switch 8 ports to the ethernet port on my AirPort Express?

  My current setup is the D-Link router/Modem > airport Time Capsule <> AirPort Express

  So I've matched the AirPort Express to the Capsule to expand my network.

  FYI: AirPort Express is 1st Gen model.

  Thank you.

  Tony

  If you really have a 1st version of the AirPort Express Gen (see note below *)... and you have configured to connect to the time Capsule using Wireless 'add a wireless network', then the Ethernet port is active and you can connect a switch to the Express.

  Don't forget that the Ethernet on the Express port is only 100 Mbit/s capable, so even if you could have a 1 000 Mbps or Gigabit switch, the speed will never be higher than 100 Mbit / s.

  * A 1st Gen Express is A1264 model number. Look on the side of the Express to locate the model number. Hard to see, with grey lettering on white background.

• Hello, I have a mini ipad 1st gen and his watch do not update to ios 9.2 and says "impossible to search for software updates".

  Hello, I have a mini ipad 1st gen and his watch do not update to ios 9.2 and says "impossible to search for software updates".

  All solutions?  Thank you

  sSimply reboot your device. If it still doesn't work do not I wanted to wait awhile

  Redfox49 if you need more support please do not hesitate to contact me!<3>

• MotoE 1st gen touch to stop everything in composition.

  Hi all.
  
  Whenever I use the Dialer to call someone, a warning message says unfortunately "contact has stopped." I am facing this problem for spending a month in my MotoE 1st gen. Why this issue happening. All of the suggestions. Thanks in advance.

  Do you have any problem with the internal memory?

  Always try to keep the free space on the internal memory...

  If nothing makes the problem solved, then go ahead a factory reset...

  The same factory reset does not work, then contact your nearby service center...

  See you soon...

• Windows 8 Switchable Graphics Support for AMD Mobility Radeon and 1st Gen Core i5 Intel Graphics

  Since I've upgraded to Windows 8 my graphics did not work at all (only the work aside Intel). This is a problem because it seems that my HDMI port is plugged directly into my ATI card and with it disabled I can't play half of my games or make use of my HDMI port. I contacted AMD and have tried all their drivers but nothing has worked for the past 3 months. They said that, because Intel is a competitor, the manufacturer must release these new driver updates to manage the two cards. I couldn't find anything to help me with this and I am planning to switch brands because it has been a frustrating experience for me. In addition, I can not install AMD Catalyst Control Center because for some reason it does not recognize my card. If you guys could help me find a solution to this problem or point me in the right direction would be great. Thank you.

  ~ Matt

  PC model: HP Pavilion dm4t-1000

  Graphics card: ATI HD5450M & Intel HD x 000 (whatever 1st gen Core i5)

  OS: Windows 8 64-bit Pro

  Graphics device from Device Manager error message: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Changes: upgrading from Windows 7 to Windows 8

  Hi Matt,

  I don't think that HP will develop Windows 8 drivers for your model, but you can try the switchable graphics avaiable to measure on the following link - I would suggest that you read the guide on how to install these drivers correctly.  It is also important to note that the driver signature enforcement is disabled so that these drivers to load, - more details can be found here.

  http://leshcatlabs.NET/index.php/2012/11/catalyst-12-10-WHQL-unifl-for-amdintel-graphics/

  Kind regards

  DP - K

• &lt; Closed &gt; motorcycle G 1st Gen will get Lollipop in India?

  What bike G 1st Gen will get Lollipop in India? I registered for test of impregnation as well but no update yet?

  There are already several posts about it. Register for the test just impregnation gives you a chance to receive an invitation for the penetration test. Not everyone who registers receives soaking. So relax and just wait for the official ota that should happen soon.

• No bluetooth in Q dv7t 3300?

  Why this series (Q dv7t 3300) doesn't have Bluetooth?

  I don't find drivers for it in the hp homepage!

  Please help me!

  Thank you!!!

  You have 2 options:

  1: buy a bth usb adapter

  2: replace your wifi by combo wifi + bth - http://www.broadcom.com/products/Wireless-LAN/802.11-Wireless-LAN-Solutions/BCM94313HMGBEPA

• Unable to pair re Apple Watch 1st gen

  Hi guys,.

  I have a first gen 38 mm Apple Watch alu and 6s with 9.3.1 iPhone. Until now they work very well together, but Sunday I reset the watch and since then one can not re pairit with the phone.

  Once I chose the language on the watch, it gives me the pair with phone dialog box, I start the app on phone, scanner watch, everything is ok, but after that, it gives me the check window of the software, where it says "watch OS 1.0, your software is up-to-date. And that's all. I can't go on, keep it right on this window.

  I tried to restart both the watch and the iPhone, reset countless times the watch, I even tried with another phone, same result.

  Any ideas guys?

  THX

  You must update to WOS 3? then update your IOS 10 phone. And repair devices

• Will 1st Gen ATV works with iTunes 12.4.1?

  I happily use my 1st generation ATV with iTunes 10.7 - but wonder if they will work if I update to iTunes 12.4.1 (on OS10.8.5).

  Thank you.

  It is best to stick with iTunes 10 times as 11 and 12 do not work well with the 1st generation Apple TV.