dv7t-7200 CTO Quad Edition Notebook PC - errors after 8.1 update update and HP

I have a HP ENVY CTO 7200 dv7t Quad Edition Notebook PC
Product number: B6B75AV

Originally from Windows 8 Pro with Media Center 64-bit

Upgrade to WIndows 8.1 via the shop
Everything seemed OK

HP Support Assistant eliminated 2.1.0.1002Ap4 contained in SP58398 which has updated the driver Intel Rapid Start Technology.

(A) after the start, I now get an office messages "your system seems not to have Intel Rapid Start with technology."

(B) if I start the Intel Control Center, I get the message "there is currently no application filed.

(C) if I start the Intel Rapid Start Technology Manager, also get "your system seems not to have Intel Rapid Start with technology."

(D) also, if I try to use an application to read data S.M.A.R.T, which also fails

(E) However, I get the info of PassMark DiskInfo:
SysInfo DLL Version: SysInfo v1.0 Build: 1041
Export: 16:18:18 November 18, 2013

The device information:
Device ID: 0
Interface: RAID
Capacity of the apparatus: 715402 MB
Serial number: {information}
Model number: ST750LX003-1AC154
Firmware revision: HPM1
Sheet music:
N/A

The ATA information:

Geometry of the disk:
Cylinders: 0
Tracks/cylinder: 0
Sectors/track: 0
Bytes/sector: 0
Total of the sectors of the disk: 1465149168
Logical sector size: 512
Physical sector size: 4096
Media rotation speed: 7200 RPM
Buffer size: 0 KB
The ECC size: 4 bytes

Compliance with standards:
ATA8-ACS taken in charge: Yes
ATA/ATAPI-7 taken in charge: Yes
ATA/ATAPI-6 supported: Yes
ATA/ATAPI-5 support: Yes
ATA/ATAPI-4 taken in charge: Yes
Series/parallel: Serial
SATA 3.0 Compilance: No.
SATA 2.6 Compilance: Yes
SATA 2.5 Compilance: Yes
SATA II: Ext Compilance: Yes
SATA 1. 0a Compilance: Yes
ATA8-AST Compilance: Yes
World wide ID: 5000C5005DF1063B

Feature support:
CHIP supported: Yes
CHIP enabled: Yes
SMART taken self-test supported: Yes
SMART error log supported: Yes
Taken LBA supported: Yes
Taken IORDY supported: Yes
CFast taken in charge: No.
Taken DMA supported: Yes
DMA multi-word maximum mode supported: 2
DMA multi-word selected: None
Ultra maximum DMA mode supported: 5
Ultra DMA is selected: 5
Maximum PIO mode supported: 4
SATA compliance: Yes
Supported NCQ priority information: No.
Unload while NCQ commands are exceptional supported: Yes
The event of PHY counters supported: Yes
Application of sustained power management: No.
Set of features taken NCQ support: Yes
SATA Gen2 signaling speed (3.0 Gb/s) supported: Yes
SATA Gen1 signaling speed (1.5 Gb/s) supported: Yes
Software Settings Preservation: Supported, enabled
Provision of data in the order: unsupported
Initiate power management: supported, Enabled
DMA Setup self-actuation: unsupported
Buffer of zero offsets: unsupported
Trusted Computing taken in charge: No.
Host Protected Area (HPA) taken in charge: No.
Read-ahead support: Yes
Predictive read enabled: Yes
Support for write cache: Yes
Cache write-enabled: Yes
Power management support: Yes
Security mode supported: Yes
Security mode is activated: no
Device Configuration Overlay (DCO) taken in charge: Yes
Supported 48-bit addressing: Yes
Auto-acoustic management (AAM) supported: No.
Start standby (THEN) supported: No.
Advanced Power Management (APM) taken in charge: Yes
Advanced Power Management (APM) enabled: Yes
Current level of APM: Minimum energy without waiting
CompactFlash Association (CFA) taken in charge: No.
General Purpose Logging (GPL) taken in charge: Yes
Streaming support: No.
The media card support through: No.
Supported power conditions extended: No.
Scope of supported status reports: No.
Writing-reading-check supported: No.
Supported free-fall control: No.
TRIM command support: No.
SCT command transport supported: Yes
NV Cache enabled: no
NV Cache support power management: No.

SMART ATTRIBUTES:
ID Description status worst threshold value TEC gross
---------------------------------------------------------------------------------------------------------------------------------------------

Any ideas what is it?

I tried to save the patch that HP has pushed out, but I didn't, my system state would be if I did.

Any ideas?

Thank you!!

xzr1tv

Install the new BIOS F29 with

Supports the feature of Intel iRST systems

http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124651-1&cc=us&DLC=en&LC=en&OS=4132&product=5328068&sw_lang=

Intel Management Engine Interface driver

http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-124055-1&CC=de&DLC=de&LC=en

Update the RST

https://Downloadcenter.Intel.com/SearchResult.aspx?lang=eng

Chipset

https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=20775&ProdId=816&lang=eng&OSVersion=Windows%208.1 * & DownloadType = drivers

Check your settings in Bios of RST

Tags: Notebooks

Similar Questions

  • HP ENVY dv7t-7200 CTO Quad Edi: dv7t-7200: Microphone is not compatible with Windows 10

    I have upgraded to Windows 10 last night.   When I tried to configure the new Deputy of Cortana listen my mic system could not hear me.  Finally, the Setup process fails and says that my microphone is not compatible.

    All race through this issue?  Someone at - he was able to solve it?

    Mike

    HP ENVY CTO 7200 dv7t Quad Edition Notebook PC

    Product number: B6B75AV

    window press the key and the x key at the same time to bring up a list go to control panel select sounds

    under the recording tab {if you have built in webcam there is a microphone next to it}

    choose right headphone click Choose set the default device

    Click on start then stettings then choose the Date and the word

    left side of windows, select speech then Middle bottom of page under click Microphone start calibration

    with mine I can't be to far away from the microphone, but once it calibrates it should work... window 10 messed up my audio so

  • Should I update my PC HP ENVY dv7t-7300 CTO Quad Edition laptop

    I have two laptops

    Product name: HP ENVY dv7 Notebook PC
    64-bit Windows 8
    Product number: C2Y69AV
    HP ENVY CTO 7300 dv7t Quad Edition Notebook PC

    Product name: HP ENVY dv6 Notebook PC
    64-bit Windows 8

    HP ENVY CTO 7300 dv6t Quad Edition Notebook PC

    When I go to the HP Windows 8.1 that they have not been tested for compatibility.

    I would like to know if I have to spend?

    Tech

    T3CH,

    HP cannot do.  It is a problem of license with Microsoft I think.  There are lawyers involved.

    -wes

  • Bluetooth problem: HP Pavilion dv7t-6100 CTO Quad Edition Entertainment Notebook PC

    Hello forums HP!

    I have problems with the bluetooth in my HP dv7t-6100.

    I am no longer able to see/add devices bluetooth with Windows 7 is to add a device. He was working a few weeks ago, but was (waking up from his sleep would cause the device to turn off and I should enable in Device Manager to operate).

    I tried unistalling, then reinstall the drivers Wifi and different bluetooth drivers, but I can't see my bluetooth devices (which I know work btw).

    Try to add the com ports manually does not work, and I can't remove them later, because I get the message error "the specified service does not exist.

    And by clicking on "Choose a COM port for a Bluetooth device" brings up the help page for Spider Solitaire, which makes no sense.

    Any suggestions?

    Thank you!

    WELL, I GOT MY BLUETOOTH WORKS AGAINN!  (Sorry for the caps)

    After turning around uninstalling and installing drivers for many hours, deletion of registry keys, reseating the bluetooth module, I finally found something that worked.

    I have installed the Toshiba bluetooth stack software and unfortunately, my bluetooth has started working again! Wohoo!

    It was difficult to settle at first it seemed that the installation froze on the driver real bluetooth, but just cancel and start the program caused to function normally. (I think its because my stack of drivers/bt bt were corrupt and I couldn't make them disappear completely).

    So, if your bluetooth stops working to the point where mine was to, try another bluetooth stack. It should not be Toshiba, but it happens to work with my HP laptop.

    SEE YOU SOON!

  • HP ENVY dv7t-7200 CTO Quad Edi: admin password bios

    Deactivation of the system 76998828

    Hello

    Try: 69690208

  • I have windows xp home edition. Last week after windows automatic update and restart, I lost the logo of the user on the Welcome screen.

    The right side of the Welcome screen is just completely empty.  No logo user, I can't in my computer normally.  I found, I could get around this by Ctrl alt del, but this makes me as a 'guest' and I can't access all the controls or updated windows help, which apparently requires the user administrator status.  How do I trouble this mess and get my normal connection?

    GOOSE,
    Here is the information on the Safe Mode.  Here is the information on the login for the administrator .  I hope this helps. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • HP ENVY CTO 7300 dv6t Quad Edition Notebook PC updated bios - win7

    Hello...

    I WANT HP dv6t-7300 CTO Quad Edition Notebook PC , it came with win 8 that I demoted for win 7, I received my drivers of HP Pavilion dv6t-7000 CTO Entertainment Notebook PC.

    I have problem of heat and I want to update Bios, the current version: Insyde F.29 03/10/2013.

    He tried to update pavilion dv6t-7000 me gives error message:

    .. . How update the bios?

    You don't Flash the BIOS unless you get the upgrade for the BIOS of the page of CTO Quad Edition Notebook PC drivers HP ENVY dv6t-7300. Since there is no upgrade BIOS listed on this page, there is no way to upgrade the BIOS. Depending on the exact systemboard and the OS that is installed on your computer, the HP part number will be something like "682174-501", which means "Windows 8 Standard / 2.0 GB of discrete video memory / 45 Watt CPU. The comparable numbers for the dv6t-7000 series is 682174-001, which means "Windows 7 / 2.0 GB of discrete video memory / CPU 45 watts.

    The MAIN of the BIOS is different version, the routine will not allow BIOS flash. IF you force it, you can make your computer does not work. DO NOT try to Flash a BIOS that does not support your computer page.

    If you have any other questions, feel free to ask.

    Please click the 'Thumbs Up' white LAURELS to show your appreciation

  • Pavilion dv7t-6100-cto-quad: I can't get the new drivers on the hp support site

    I have restored my ssd from disks that I made the computer when I bought it and I did everything I know to do and can not get the hp support site to give me a list of drivers for that computer. I know there must be some updated drivers for the computer 3 years, but I don't know how to get them and it is interfiering with other programs or drivers that need updated drivers that I can't. Please help me with this. I learned that the site is in place and current, but it does not work as far as I can tell, for my portable quad, dv7t-6100 cto. Everything continues to run and never becomes pilots. Thanks for any help in getting this resolved.

    REO51ST

    is older than me - the site is always down.

    fishcrazy13

    Here is a workaround:

    Drivers HP Pavilion dv7t-6100 CTO Quad Edition Entertainment Notebook PC Windows 7 (64-bit)

    It's somewhat austere course - this isn't the site of HP, so you won't see the full Support pages of manuals, operating instructions and troubleshooting.

    I checked the other models - those I previously checked watch this site matches the drivers supplied by HP for the model and the version of the OS.

    Click on the Thumbs - Up Kudos to show that you appreciate the help.

    Click on accept as Solution when the answer provides a fix or a workaround!

    I am happy to provide assistance on behalf of HP. I do not work for HP.

  • HP ENVY dv7t-7300 CTO Quad Edi: what part of replacement fan that I get for my laptop? Memory discrete or UMA?

    Hello, I have problems finding the right replacement for my hp laptop part. I have a laptop that needs to have his replaced fan/radiator. The laptop is the HP ENVY laptop dv7t-7300 CTO Quad Edition. I went online and find the service manual for the computer to find the spare part. There was a list of spare parts for the different variants of models.

    The results of narrowed it down in 2 results for spare parts. A fan/radiator was for a graphics subsystem with discrete memory and the other fan/radiator for a graphics system with memory UMA. I don't know which one is for my computer, could you please help clarify? The part 682061-001 or 682060-001 part?

    Model No.: dv7t-7300

    Product #: C2Y65AV

    [Personal information]

    Hello

    No, I'm talking about Device Manager. Hope that the sticker is good then your machine's discreet graphics because:

    • The UMA version applies to the motherboard that does not have a separate dedicated graphics chip. On this version, the graphics processing is managed by the North bridge chipset.
    • The discreet version applies to the motherboard with a separate chip to achieve all the graphics processors.

    Based on the sticker, your machine has NVIDIA GEFORCE GT M 635

    Kind regards.

  • HP Pavilion dv6t-6100 CTO Quad Edition Entertainment Notebook PC bluetooth?

    I have a HP Pavilion dv6t-6100 CTO Quad Edition Entertainment Notebook PC with Win7 Home Edition. The manual indicates that it has bluetooth capabilities. Device Manager does not list a bluetooth adapter. Belarc Advisor said that the laptop has an Intel Centrino Wireless Bluetooth 3.0 adapter and high-speed virtual. I downloaded and installed sp55138.exe Intel PROSet driver bluetooth, but still no bluetooth.

    This laptop have bluetooth capability, and what is the appropriate driver/software to activate it?

    Thank you.

    To check if your laptop is Bluetooth capable, go to the device and then manager network adapters. Note the model of network adapter, and then check the manufacturer's website. My original card is an Intel N1000, that isn't compatible Bluetooth. I intend to change it on shortly with another model that has Bluetooth.

  • Validity Sensor does not not in dv7t - 6 c 00 CTO Quad Edition using Windows 8.1 Pro 64-Bit

    Hello

    I have a Pavilion dv7 (dv7t - 6 c 00) CTO Quad Edition (product # A1L77AV) I can't get the validity fingerprint sensor to work after installing Windows 8.1 Pro 64-Bit from scratch.

    Windows 8 drivers that are available for this model do not seem to work. Other drivers Windows 8.1 available in the HP site do not seem to work either.

    The unit shows in the management of the computer as a work, I guess by using a Microsoft Driver. The Unit presents itself as "validity sensors (WBF) (PID = 0018)' in the biometric devices topic."

    Any help will be appreciated.

    Thank you

    Hello SauveDuro, welcome to the Forums of HP.

    I see you are trying to install the drivers for the fingerprint reader on the laptop for Windows 8.1, you've seen questions get this working.

    Unfortunately, HP does not drivers for Windows 8.1 for your laptop.

    The most I can recommend in this case, check the manufacture of each component for Windows 8.1-compatible drivers.  Here's a link of validity, you may be able to get drivers that work for him: http://www.validityinc.com/software/hp/wbf.php.

    This can also help you to: Troubleshooting a (Windows 8) fingerprint reader.

    Sorry for the inconvenience that this may cause. I hope that something can help you.
    Thanks for posting on the HP Forums.

  • Disable Secure Boot on HP Pavilion dv6t - b 6, 00 CTO Quad Edition Entertainment Notebook PC

    Hello

    I have a HP Pavilion dv6t - b 6, 00 CTO Quad Edition Entertainment Notebook PC and I installed 8 64-bit windows.

    I installed the latest version of the BIOS F.1C.

    I want to disable Secure Boot to boot from a USB EFI.

    I started windows in Advanced Mode, but I don't see the option highlighted here: http://www4.pcmag.com/media/images/380851-back-to-windows-7-uefi-firmware-settings.jpg?thumb=y

    My BIOS is locked and I don't have any advanced options there.

    Thank you

    Have a great day.

    If you original computer comes with Windows 7, it is not / is not compatible "Secure Boot. Please see "on UEFI and Start Menu" for more information on access to various start up options and instructions on disabling "Secure Boot".

    To boot from a valid "UEFI USB", the computer must recognize the active UEFI boot device. Some computers are not what UEFI valid "NTFS" format USB Flash Drives UEFI activate and in this case, the USB Flash drive must be formatted in FAT32.

    Use the Boot Menu or Boot Device menu to choose a source of UEFI, such as Windows Boot Manager startup, - internal CD/DVD drive or UEFI - UEFI USB Flash drive.
  • Win8 drivers update (How To... what order?) Pavilion dv7t - 6 c 00 CTO Quad Edition laptop

    I am a MSDN developer and run Win8 RTM (Pro) for about a month on Pavilion dv7t - 6 c 00 CTO Quad Edition.  I was forward updates of the software/driver for Win8 OFFICIAL from HP (because my AMD video card did not work).

    Now I see Win8 pilots begin to appear... My question is, "what order should I apply these updates?  And that I should wait until ALL updates are displayed? »

    Currently

    • Audio
    • BIOS
    • Intel chipset
    • YouCam
    • Touchpad

    Updates are available for Win8

    What I REALLY need, is the AMD graphics card drivers... (Intel Graphics too well this card works...)

    I guess I should apply the updates in this order

    (1) bios

    (2) Intel chipset

    (3) audio

    (4) touchpad

    I can't REALLY afford to have this computer down!...

    Please notify

    Hello:

    I copied and pasted the correct order of your post below.

    (1) bios

    (2) Intel Chipset (restart computer after installation)

    (3) audio (restart computer after installation)

    (4) touchpad

    I highly recommend to install the updated BIOS in windows safe mode so that there is a minimum of current process.

    If she didn't say adds support for windows 8, I would have recommended does not update the BIOS.

    A too risky adventure, update the BIOS...

    There's no graphics driver out yet so it may not be your hopes to the top...

    Paul

  • HP Pavilion dv6t - b 6, 00 CTO Quad Edition gel

    I have the HP Pavilion dv6t-7000 CTO Entertainment Notebook PC, with 8 GB of RAM, hard disk 7200 RPM and 32 GB of WSSD Cache on the hard drive, and I noticed that there was a problem of freezing of small. Happens at random times, everything freezes, I get messages only respondents, and if the music plays, he also stops, but he just goes for 15 seconds and picks up back. I already did a check of the hard drive and gave me no error and I also did a factory reset and problem persists. My sister also has HP Pavilion dv6t-7000 CTO Quad Edition and same problem appears. I don't know if it's a hardware or software problem.

    I did a clean install of windows 7 and just reinstall the drivers, so the problem is now resolved.

  • HP ENVY 15 t-j000 Quad Edition: HP ENVY 15 t-j000 Quad Edition Notebook PC - white screen

    Hello

    I have a HP ENVY 15 t-j000 Quad Edition Notebook PC. Recently I started to notice a problem on my laptop.  I have some...

    Help, please!

    Hey @HPENVY15t-j000,.

    Unfortunately your laptop is not setup for a touch screen. This is a link to your page 27 manual replacement parts.

    I hope this helps.

    Thank you.

Maybe you are looking for

  • R & R disk USB startup on UEFI

    I tried to install Windows 7 ultimate mode UEFI on my T420s. It seems OK and Lenovo tools such as the power, footprint Manager digital works fine, only problem I have with rescue & Recovery tool. I use the external USB drive for backups, where R & R

  • Query - How can I use POP3 and Port 110 as my transport?

    My e-mail provider can use POP3 (port 110) or IMAP (port 143) that the port of mail transport. E-mail on my TP does not seem to work with port 143. Is it possible to make it work with port 110? Alan

  • Problem by checking the browser URL 12 c forms

    HelloMy problem by checking browser URL ( http:// host : port /forms/frmservlet ), in the browser (IE 11) shows the following:Forms is installed in 64-bit Windows 8What will happen?Roberto

  • Find and replace multiple files Script

    I'm trying to find a script that either will open a selection of files .ai or browse all open in illustrator files and perform a search and replace. Right now I have a script that runs find and replace, but I must run on each document instead of all

  • Import from Lightroom for comp

    I thought that COMP is used to allow me to pull images from Lightroom Mobile in a design.  But now I can't find it on any of the menus.  Where is it supposed to be and is there a problem for example Comp cannot detect the presence of Lightroom on my