DVD and Bluray works do not HELP!

Similar Questions

• DVD - rom and DVD - rw read previously written DVDs and CDs but will not read a blank cd or dvd in the drive

  Original title: Dvd rom problem

  Am running windows XP. DVD - rom and DVD - rw read previously written DVDs and CDs but will not read a blank cd or dvd in the drive. Any help out there?

  Hello

  1. When did you start to question?

  2. did you of recent changes on the system?

  3. you receive messages or error codes?

  You can check the following link and try to run the Fixit and check.

  Your CD or DVD drive cannot read or write media

• HP OFFICEJET 4500: printer problem hp 4500 doen't pull paper from the bin, hp print and scan doctor did not help

  Paper printer problem hp 4500 doen't pull of the plateau, hp print and scan doctor did not help

  Have you tried that?

  http://support.HP.com/us-en/product/HP-OfficeJet-4500-all-in-one-printer-series---K710/4181269/document/c01969913/

• But readers of DVD and CD worked before updates

  Had my new Tower, has both DVD and CD writer capabilities.  Things got up and running, CD and DVD recognized media and read automatically and I was able to install some programs that I need to install.  Receive updates for the computer.  DVD CD & quit reconizing there inserted media and not read or run anything.  I have even more programs to install.  When I update the drivers, it says that the drivers are up to date.  I also lost the ability to use USB keys at the front USBs.   Help please

  I have the problem fixed now.  I went to Microsoft and downloaded the drivers directly and now no problems.  Discs working as should be.  One of the files downloaded on the compromised updates the original drivers.

• RW/dvd was now working is not considered to be rewritable

  Until 3 days ago, my driver wrote OK, now my win7 64-bit not see as rewritable.
  I changed to the other three pilots, and the same problem appears.
  The DVD can read and read but not write.

  I suspect the file windows/system32/drivers/cdrom.sys is corrupt, but lacked the means to address them.

  I even performed a restore without success.

  Hello

  Having too many CD/DVD programs can cause strange problems, especially if they're loading of parts of
  themselves at the start because they will be competing for resources. This does not mean that this issue has been
  caused by those, however, it's a possibility depending on which and how many you have installed.

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  -------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Install new FF4, back/transfers and Refresh buttons does not - help!

  New installation of FF4.0 the forward/backward buttons and refresh from line. They do not work.

  I tried:

  restart
  relocation of
  start in safe mode
  remove places.sqlite and restart

  All to nothing does not. Any ideas anyone?

  Create a new profile as a test to see if your profile is the source of the problems.
  See:

  • Basic troubleshooting: make a new profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins»

  If this new profile works then you can transfer files from the old profile to the new profile (be careful not to copy corrupted files)
  
  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  If this does not help, then do a clean reinstall.

  • Download a new copy of Firefox and save the file to the desktop.
  • Firefox 4.0: http://www.mozilla.com/en-US/firefox/all.html
  • Uninstall your current version of Firefox and remove the Firefox program folder before installing this copy of the Firefox installer.
  • Do not remove the data of a personal nature if you uninstall the current version.
  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data is stored elsewhere (not in the Firefox program folder) and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

• HP Envy, Windows 8 slow, late and does work does not correctly

  Hello

  First off let me give a run down of my installation:

  -HP Envy Dv7, (about one and a half years)

  -Windows 8.1 (I upgraded windows form 8)

  -HDD 750 GB (Stock)

  -Everything else is stock based on the computer

  So, my trouble started about 3 months after what appeared to be a routine stop after a day use.  The next time I started my computer took a lot more time to start, I got an error that talked about my control center catalyst having an error and does not and that nothing would be open to all.  After the merger with different ideas on how to solve the problem, I dropped and it factory reset.  This fix has worked for the whole two days were once again, I got the same problems, I did another reset and when it does not work I gave up for a while.  About two weeks ago, I again have to reset it and then updated for windows 8.1through microsoft dreamspark.  This seemed to fix my kind of problem, the same questions (not counting control catalyst who never returned after the update) would be upward if I have it plugged anything in the USB drivers.  Now for some unknown reason which was not the case for my wireless mouse which worked just fine.  If at this point, I have a mouse plugged wireless and no problem whatsoever.  One day I shut down my computer with the mouse is always plugged (I never do usually) after I do all my troubles to come back but enlarged.  I tried to do just a refresh of windows but it says that my hard drive is locked and let be honest I really want to keep refreshing and resetting my laptop and lost al my stuff.

  So now, here's a list of my exact problems in most occuences recentof, now:

  -Slow start and typing in my password take like five minutes to register that I typed in fact anything

  -l' unlock screen is for like five minutes

  -My Office take a good ten mintues to load all my icons and others

  -J' have a popup that says IEWebsitelogon, not having that take a long time to close

  -EACH window is delay, that is difficult to change their size, move about minimize, close, etc...

  -Every thing take > then five minutes for open including Manager, start menu task

  -Much more delay and related issues

  What is one thing to hard drive? They are not too expensive to replace, so I can get another copy of the win8 form my school so if that is the question that is very well.

  I really need help, my computer is basically usless, I am a student I need my computer please help me.

  Hello

  As you probably know, the error code 24 characters for short drive Self Test (DST) would indicate that hard is defective and must be replaced.  It is also entirely consistent with the problems of performance, as you describe in your initial post.

  If there is no help, the player at the link below is an example of one that would be perfect for your laptop.

  750 GB hard drive for laptop.

  The procedure to replace the hard drive begins on Page 56 of your & Maintenance Guide.

  Kind regards

  DP - K

• Network adapter (device Bluetooth (Personal Area Network) and Btooth works does not after installing W 7 Ultimate__ (Situation Reported to microsoft Hel and Support under SRX1120597135ID Without solution untill today))

  BTooth works do not after Windows Vista upgrade (Btooth works without problems) for W7
  At the moment I have problems connection BlackBerry device and other devices via Btooth
  messages 1: 'softwarfe device driver was not successfully installed ".
  message 2: "WIDDCOMM Bluetooth Software 6.1.04403 Dell Incompatible" (WIDCOMM = Broadband - manufacturer)
  In short, the list obtained messages:
  1 device driver software was not compatible
  2. incompatible software Bluetooth
  3. the drivers are not installed: lists of codes (31) (28) (10)

  Report of the final situation for Microsoft Help and Support under SRX1120597135ID (withoutany positive response so far, I have been asked to report through this forum, I hope a solution will be here)
  I tried all the options you will find in google without success.

  I contacted Dell and Bradband and I have upgraded to WIDCOMM Bluetooth Software 6.2.0.6600 available in Dell Support without positive results.

  Repost: Windows Update has nothing to do with the upgrade of Windows. Posting here instead: http://social.answers.microsoft.com/Forums/en-US/w7hardware/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• CD/DVD no longer works, was not detected in Device Manager.

  Original title: cd/dvd drive Inop

  I use Vista 32 bit operating system. Until a few weeks ago, my cd/dvd worked. He suddenly stopped and when I look in my computer, it does not yet show upward. I followed a few steps from triubleshooting and they always have not worked. It appears on the BIOS but not on Device Manager page. What can I do to make it work then?

  Hello

  1. What are the troubleshooting steps you have tried to solve the problem?

  2. What is the brand and model of the computer and the CD/DVD drive?

  3. have you done any software or hardware changes on your computer before this problem?

  Method 1:

  Reference:

  Hardware devices do not work or are not detected in Windows http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Hope the information is useful.

• speakers and microphone works do not, said convenience store "device working properly.

  a couple of days ago my machine makes an auto update as usually and things seemed good, but shortly after, I noticed that I had no sound function or a microphone of my internal devices and making helmet is also non-functional. the first thing I did was restart, no luck. Then, I ran a convenience store and received the msg above. I noticed that while I had the audio device manager open that I do not have access to the 'configure', 'default' and 'properties' functions under the tabs of playback and recording. After a further review I thought that maybe I had a problem of compatibility of the driver with the recent update, but I'm not really sure of what has been updated. I also thought I might have a conflict of use with an application hogging things even though I have seen no unusual activity in the Task Manager. Despite this, I disabled the 'google ok' feature in chrome and restarted. This seemed to fix that I had the sound and the microphone back, but when I started this morning I had the same problem and since I don't re - not allow 'google ok' and it does not automatically start (I checked), which doesn't seem to have actually done something after all, or there are other problems that are still not resolved.

  in any case, I'm running worm Realtek HD Audio Driver 6.0.1.6937, I'm on a wired ethernet connection, I got no error msgs and I did not any changes in software.

  FYI, I found an announcement and related solution for what seemed to be a similar problem (see post titled "speakers and microphone doesn't work DO NOT, all the devices said to work" posted on 26/02/2013 15:00), but the pilot referenced was an IDT Audio driver not a Realtek, don't know whether or not the process is the same.

  so that is where I am. any help?

  Laptop HP 2000-2b24NR
  Product no.: C2M60UA #ABA
  OS: 8 64-bit Windows

  Hello

  I do not work for HP, but I see a definite advantage on the subject of what you are suggesting.

  Try to perform the following procedure.

  Download Realtek HD Audio Installer on the link below and save it in your downloads folder.

  Realtek HD Audio Driver - Windows 8

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the Realtek device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  Then, download and reinstall the Chipset driver on the following link.

  Chipset Driver - Windows 8

  When done, shut down the laptop by holding down the key SHIFT left click Shutdown to temporarily prevent a hybrid boot.

  Disconnect the power adapter and remove the battery.  Press and hold the power button for 20 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right click on the installer of Realtek and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  Left click "Speakers/HP" (speakers or headphones) once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• Disk Cleanup doesn't work does not HELP!

  I tried to run the cleaning disc for hours now, but it does not work.

  I tried to launch it from the search for "Disk Cleanup" and cmd in file Explorer, but none of them work.
  When I click on it if it goes to the popup with different readers after I click OK nothing happens.  It does not show compress older files or anything like that.
  Any help is very appreciated, I am really pulling my hair out because I need to remove a windows.old file because my SSD becomes full.

  Hello

  Please answer a few questions to refine the question.

  1. have you already try to launch the program from "Administrative Tools" in the control panel?

  2. you have any third party such as registry cleaning software, CCleaner etc. ?

  3. have you recently upgraded to Windows 8?

  I suggest you to start cleaning disc by right-clicking and selecting 'Run as administrator' to see if it helps.

  If the problem persists, you can start the computer in safe mode and check if it works or not.

  Reference:

  How to easily enter the mode without failure in windows 8? (One-click series)

  http://support.Microsoft.com/kb/2809468/en-us

  Hope this information helps. Response with status so that we can help you.

• HP Pavilion dv6-6119wm HDMI and VGA works do not both together

  Good evening, I have a laptop HP Pavilion DV6-6119wm Quadcore with AMD Radeon graphics card, which includes a VGA port and an HDMI cable. Together they are so close that you cannot connect both at the same time, but as I needed this so much, I cut the part on the side of the VGA cable to connect the two: the VGA and HDMI cables. Now they are connected.

  The runtime separately, they work very well: HDMI works ranging from office with the laptop screen and VGA works too big office that stretches with the screen of the laptop, but I want to run the extended desktop on the 3 displays: the laptop display, vga and hdmi. I tried to put parameters "- display - screen resolution" on Windows7 and when I try to "Extend the desktop to this display" if she s HDMI If VGA is work or vice versa, I get: "cannot save the display settings.

  Is the function of the use of two video cards at the same time is available? So then I m something wrong on the parameters, and if not, I'll have to look for an alternative to the extension of the workstations.

  Thank you.

  Roberto

  Hi Tan60, I did some research for you and I found a link that I think will help with the problem you are experiencing. Please click on the following link and follow the path to the document that is located outside of HP.  http://goo.GL/L2bZNN

  If you have any questions or concerns, feel free to write again and I will continue on with more research on this issue.

  Thanks in advance

  Waterboy71

• FP crashing in IE and FF; Reinstall does not help not

  Windows 7 64 - Bit on a Dell laptop for 2 years (Studio 1745).

  During the past year, I had the following problem: each player from time to time flash will decide to stop working and will break in IE and Firefox.  The browser freezes for about 30 seconds, then the message "Flash Player broke down" "send a crash report" appears.   My standard solution for fixing this is:

  -run a standalone uninstall

  -Delete everything in appdata/roaming/adobe

  -Delete everything in appdata/roaming/macromedia

  -delete c:/windows/syswow64/c:\windows\system32\macromed

  -Reinstall the current version (separately for each browser, sometimes as a plugin for FF)

  Most of the time this could fix things; Sometimes I have to do two or three times but in the end everything would work.  I could watch youtube videos, play games on kongregate, and teach an online course that uses flash.

  It crashed this morning (when using gmail work, something I do every day) and reinstall does not work.

  I've tried a few things.  I could see the animation on http://www.adobe.com/software/flash/about/, and from there I was able to disable hardware acceleration.  That did not help.  I thought that Firefox can be something weird with it, so I reinstalled firefox, no luck.  I tried rather install a debug build: 10,2,159,1.  This still crashes things.  I have not yet tried to roll back to, say, Flash Player 9, but this seems to be a rather extreme solution as something else is clearly wrong.

  Any ideas/thoughts would be welcome.  Memory problem? Video drivers? I'll try anything at this point.

  Thank you!

  Could you open a new bug on this issue over at bugbase.adobe.com?  Here is a post that describes the information that we need and instructions to generate a crash log:

  How to report an accident with Flash Player

  The journal of the accident might be essential to understand what is happening.  In addition, I would recommend install the Flash Player 11 rc drive to see if that helps.

  Thank you

  Chris

• I have a Hotmail account and I can't and recovery password will not help. I want now!

  I had an account hotmail for 13 years.  I put up as a fake account for all offers, sales, etc.  2 nights ago when I tried to log in, he told me that I had to change my password.  So I did.  Now I can't, and password recovery does not work because it's been 13 years since I put in place and I don't remember things to implement.  I want in my account and I want it now!

  How TO recover your Hotmail account
  http://blogs.msdn.com/b/securitytipstalk/archive/2011/09/21/recover-your-Hotmail-account.aspx

  Windows Live account recovery page
  https://security.live.com/ACSR.aspx

  Hotmail account compromise detection and recovery (sticky)
  http://windowslivehelp.com/thread.aspx?ThreadId=48e74fb5-82f6-4A82-ae51-d0788c81dccd

  Your only option is to post in this forum for assistance-online http://windowslivehelp.com/forums.aspx?forumid=d3fda415-1e53-4007-8e0c-2a77180ffb1d

  [No, you can't do anything by phone, email or mail.]

• browser Simulator simpak 5.0 9530 and cards work do not

  Hello

  I use the simpak Simulator 5.0 9530 and can't get its browser application and maps to work.   The browser says it can't connect to the MDS (Yes, I checkied in the run configuration) and the maps app loads not all cards - also my calls to Locator.geocode (addrInfo, null) return no result in the SIM but it does on the real device. Unfortunetly I don't the real device all day to make my tests on I need the SIM to work just to test and debug my app.

  I also tried the sim 9700 but get a crowd of nullpointerexception on the screen I want to test (I scroll the different EditFields on the screen - the exceptions which do not get triggered on devices 9530 or the real (a storm 9550).)

  So, how can I get the application browser and maps to work?   I tried to check the MDS and set/clean-flash in the bat file - but nothing works.   My application uses http connections which usually work as it seems particularly strange that the browser does not work.  And so we do not use a proxy for internet access.

  I use eclipse 3.5.2 plugin 1.1, Smartphone BlackBerry 5.0.0\5.0.0.419 simulators (9530), Windows XP pro sp3, latest java, java compliance 1.3 value

  A little more information, the screen that I have tested has fields for the user to enter an address.  It has also two buttons - one who evokes the maps app centered on the address entered by the user (geocoded) and the other which records the location indicated by the user as the default location to be used by the app for various things (for example find nearby stuff here).  I have also a menu point which copuies a location since the paper and tries to use it to fill in the fields on the page - so if a user shows its maps app to a place and uses the * copy location * menuitem - it can then paste this location into my application.

  The MDS - CS Simulator fails to start because another application is already using port 8080, which means that it uses to accept connections push.  You can close the other application, or change the port used by the MDS - CS Simulator.

  To change the port, the MDS - CS Simulator uses edit the rimpublic.property file located in the directory below and change the value of the WebServer.listen.port parameter by an unused port.

  Eclipse\plugins\net.rim.ejde.componentpack#.#.#_#.#.#.##\components\MDS\config