DVD/CD RW drive does not open
Drive DVD/CD-RW door does not open. Tried to open it by going to my computer, media player and selecting "EJECT", but I get a message "error with the player." Any suggestions? I have not had any problems in the past with the drive and burned many CDs. It is not a CD in the drive now. My computer is only 6 months old. What can I try to get to open my car door?
Hello For the readers of the status bar: Sometimes they get stuck. There is a small hole on the front of the CD drive that you can stick a Create a trombone in car Opener Open a CD/DVD player with a paper clip. ================================= For the readers of the slot: Check with the manufacturer of system on how do to eject the disc. Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">--> Be careful as you may damage the player using the method below: The method used on the Mac could work How to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">---> Also have heard double tape on a credit card or play can work. I hope this helps and happy holidays! Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">-> Tags: Windows My dvd/cd rom drive does not open I looked for mechanical problems, I've updated the driver, I tried manually open (press the Open button), I tried to use the computer to open, but all without success. This has happened as my computer starts does not sometimes after it has been switched off. Hello Try using a tip of a paper clip to open the tray. "How to create a trombone in car opener. http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm "CD-ROM, DVD or other drawer not open." http://www.computerhope.com/issues/ch000214.htm See you soon. Satellite L500-126-CD/DVD drive does not open very well unrolled Hello I just got my second Satellite L500-126. Now, with my new one, I noticed that my dvd drive does not open very well unrolled and 2 bars of silver metal bit come out with the car when I open it. Also, when I close the dvd player, I hear a little noise "ping!" Thanks in advance. Hello I'm not quite sure what you mean by 2 small bars of silver, but the reader of my laptop s contains two metals (runners, railway). So I guess it's ok. DVD drive does not open. DVD drive does not open. Won't open with the emergency eject button. Once opened, it will close with the eject / close button. How can I fix it? This can cause the drive open suddenly do not? Thanks for any help you can provide. Hello · What is the number and the model of the computer? · Do you remember all the recent changes on the computer before the show? It seems to be the problem with the computer's hardware. You can check with the manufacturer for assistance on the same. DVD drive does not open. What can I do? Yesterday, the DVD drive in my Dell laptop, Inspiron, Windows Vista has worked very well. This morning, the drive does not open when I pressed the eject button, although the indicator flashed several times. Dell support site mentions try "eject feature in Windows", but I can't find information about this. It is important to get the DVD drive works because I'm ready to upgrade to Windows 7. How can I fix the drive? GordonP http://www.ehow.com/how_2324439_eject-stuck-DVDCD-drive.html http://www.fonerbooks.com/laptop12.htm But first of all, you can go in my computer, find your dvd drive, right-click on it and click on eject. If this post answers your question, click mark as answer . DVD/CD-RW drive does not-Tecra A4 Hi, I have a problem with my Tecra A4. p.s. I bought this second hand, but it's new. He had a damaged screen I have replaced Julian If the old drive will not read media if it s damage. You said that the button C doesn't allow you to boot from the disc. Satellite Pro A120: DVD/CD-RW drive does not work Hello: the dvd/CD-RW drive does not work. apparently it has been disabled somehow! Any ideas on how I can turn it back on? Have you tried the Device Manager and it says it works normally! Any ideas please? Thanks :) > apparently it has been disabled somehow How someone or something should turn off the drive? You have disabled the drive? I don't think so! You said that the drive appears in Device Manager. So I guess that the drive is enabled and is recognized by the OS. Perhaps the reader can read or burn CDs or DVDs. Maybe the replacement drive is required! CD drive does not open on the hard drive of the computer. Original title: on my hard drive DimensionE521 the CD-Rom drive does not open. He starts to and then stops. The computer says it's OK? Help? I had this problem and another time after playing with him for days, all of a sudden it just opened. There is nothing in the drive - I'm sure of. Everyone has to experience this problem. Hello Nannytosix, If you look very close to the door of the CD player, you will probably see a small hole somewhere around him. What you need to do is unfold a paper clip and push it in the hole and it should open the CD drive manually. I encourage you to consult the manual to check this. Best regards Matthew_Ha Original title: BD - rom drive My Cd drive does not open. I even sent it back to the factory to get the engine replaced and it used to always open. And if it opens, it read any disk. What should I do? Can I open the player through my laptop instead of hitting the button on the outside? Hello Jayde, You can look for a tiny hole on the draw draw in which insert a paper clip to manually eject the CD player draw. Follow these steps and check if that helps. Step 1: Open Windows Explorer, right-click on the drive icon and choose the option to eject it. If it is ejected from your CD-ROM drive tray, button on the hard drive is faulty and it is recommended to replace the disk. Step 2: Also boot in the BIOS and check if you can eject the CD by pressing eject CD player if the problem persists then drive is defective. Warning of the BIOS: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk. Step 3: I suggest to start in safe mode and check if you are facing a similar question: Start settings for Windows (including safe mode) http://Windows.Microsoft.com/en-in/Windows-8/Windows-startup-settings-including-safe-mode Let us know the status of the issue after following the steps above. So that we can help you further. Satellite L350 - CD/DVD drive does not open I have a new laptop, less than a month, but his habit of CD/DVD tray open by pressing eject button. Eject-do a right-click on its icon does not open it no more. There is no disc inside, it is visible in the BIOS, no sign of a driver problem in Device Manager. I tried reinstalling the driver, but that didn't help. Any solution for this problem would be appreciated. Thank you. Hi inecro, If the CD/DVD drive doesn t open more I think that you can do anything in this case. I can only confirm what writes Akuma. You need to replace the CD/DVD drive and you get a new from an authorized service provider. If your laptop is under warranty you can get a new one for free. I had the same problem a few months ago. EPA has replaced the CD/DVD drive in a few days and I come back my laptop. Very fast service and the technicians are friendly. :) Disk drive does not open. What is a girl to do? I've been ripping CDs to music on computer, and now my drive doesn't open. Can you help me solve this problem? Hello If they don't help then check with the manufacturer of the system or in support of the Drive manufacturer, The drive is just stuck? For the readers of the status bar: Sometimes they get stuck. There is a small hole on the front of the CD drive that you can stick a Create a trombone in car Opener Open a CD/DVD player with a paper clip. ================================= For the readers of the slot: Check with the manufacturer of system on how do to eject the disc. Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">--> Be careful as you may damage the player using the method below: The method used on the Mac could work How to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">---> Also have heard double tape on a credit card or play can work. =========================================================== If necessary: Follow these steps to remove corruption and missing/damaged file system repair or replacement. Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN sfc/scannow How to fix the system files of Windows 7 with the System File Checker Then run checkdisk (chkdsk). How to run check disk in Windows 7 ========================================================== After the foregoing: References to Vista also apply to Windows 7. Step 1: Please do all the same underneath if you did some before as is often total Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab. Your CD or DVD drive is missing or is not recognized by Windows or other programs Try this fix manually if the Fixit 314060 does not work
Your CD or DVD drive is missing or is not recognized by Windows or other programs- The DVD player does not work after installing Windows 7 The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
When you insert a CD or a DVD, Windows Vista may not recognize the disc Your CD or DVD drive cannot read or write media - A Mr Fixit CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista Hardware devices not detected or not working - A Mr Fixit Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both Some DVD players do not use the Windows default drivers so check with the manufacturer of system and =============================== Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD Did you follow the Troubleshooting Guide for the reader who still does not work? There are Check with your Maker system and a device for the two possible firmware updates and the Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318} ----------------------------------------------------------------------- You can probably find more info here and maybe even the exact registry settings for your Forums - a lot of expert real help CD/DVD units Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point) DevManView - free - an alternative to the standard Windows Device Manager, which displays I hope this helps. Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">-> Separated from this thread. How can I open a disc in my drive, but does not open on my screen? Hello Step 1: Please do all the same underneath if you did some before as is often total Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab. Your CD or DVD drive is missing or is not recognized by Windows or other programs Try this fix manually if the Fixit 314060 does not work Your CD or DVD drive is missing or is not recognized by Windows or other programs- The CD drive or the DVD drive does not work as expected on a computer that you upgraded to When you insert a CD or a DVD, Windows Vista may not recognize the disc Your CD or DVD drive cannot read or write media - A Mr Fixit CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows Hardware devices not detected or not working - A Mr Fixit Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both Some DVD players do not use the Windows default drivers so check with the system manufacturer and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary. =============================== Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly. Did you follow the Troubleshooting Guide for the reader who still does not work? There are Check with your Maker system and a device for the two possible firmware updates and These are the keys in my opinion, are those in question - secondary-keys for the CD/DVD drive of course because there will be other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318} ----------------------------------------------------------------------- You can probably find more info here and maybe even the exact registry for your CD/DVD settings Forums - a lot of expert real help CD/DVD units Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
DevManView - free - an alternative to the standard Windows Device Manager, which displays all devices and their properties in flat table, instead of the tree viewer I hope this helps. my dvd is battery and does not open after that I tried to install a program. Hello I started to install a program on my laptop. The installation did not pass. And the cd is stack on the disc and does not open. On my computer, it does not see the drive that reports to the Conference on disarmament. shows that C; and f: Hello Arturomaduro, By "stack" I assume you mean that the CD/DVD is 'stuck' in the player and you cannot get the drive to open it? The most important thing right now is to get the DVD from the drive. You have two options. 1 / restart your PC and press the eject button on the CD/DVD drive to see if the drive open and release the CD/DVD. Normally, this should do the trick. 2 / if my first option does not release the disc caddy, you will need a large paperclip and bend straight. Take a look at the front of your DVD drive and you should see a small hole. This is usually placed near the eject button. Make sure that your PC is off and you have removed the plug from the socket. Now insert the straigtened paper clip into the hole and the 'push' the draw caddy should now begin to open (or open completely). If it opens only paritally, then gently pull the draw caddy until it opens completely and then remove the CD/DVD. After removing the CD/DVD push the caddy draw lots to close. Be sure to gently push to clear the draw caddy. Maybe it's just a unique and the player will operate normally afterwards. If she keeps refusing to eject a CD/DVD, there may be something wrong with the CD/DVD unit itself. This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS. John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com Yesterday my HDD on Inspiron 620 does not open. He opened with trombone out of disk. Once I had drive it would not open again. When I turn on the computer disk hard fact sort of creaking, noise, but stops after about 20 seconds. Any suggestions? danapoint You need to replace the CD/DVD/RW drive, it's broken. DVD SATA drives are cheap, available for $20. http://www.Newegg.com/CD-DVD-Blu-Ray-burners-media/category/ID-10?name=CD-DVD-Blu-Ray-burners-media Bev. My E drive drawer does not open to receive a disc. If you have tried all of the usuals, i.e. press the CD button open or right click on the drive in "computer" then press eject, (finally some anyway) most CD/DVD players have a small hole on the Panel of the real player, sort of a manual ejection. Push something long and thin (maybe a paperclip) to the bottom of it, and it should open. Try to do with the PC turned off initially, but Ive done with the power on. Just go simple and not too heavy handed. This gives the idea and pictures - http://www.computerhope.com/issues/ch000214.htm C309G-m cannot permanently the size value of A4 paper Yes, I realize that this has been asked several times... but with no resolution. It is regrettable that HP refuse to provide telephone support for the printer at home... I am running windows 7 in British English. The printer is a UK C309G-M spec. The I can't update and FAILURE opens with this code 80070490 I installed windows 8.1 on my 8.9 inch A150. It works, but I need to earn 8 drivers for touchpad. After a small violin in microfinance on the value, everything worked fine, except the touchpad. It is installed with a generic PS2 Mouse which means o How to rip data dics on my computer I use Vista and even if I can play music that has been placed on the disc to MP3 in the form of data I can't seem to copy on my computer. I also want to convert the normal audio music. How to configure the network adapter when you run ESXi on VmWare workstation? How to configure the network card installing ESXi on VmWare workstation 6.0.0?These are the options: I tried bridged, host-only NAP. None of them worksWhat Miss me? driver or adapater?I'm running on vmware workstation on Windows 7 with Lenovo laptop
a paper clip that will release him and the reader to open.
http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm
http://www.josepino.com/?open_cd-dvd_paperclip
http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_eject
You may need to get the driver to work 1 However, this could still work.
http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.html
http://www.YouTube.com/watch?v=wpWieIoBBrk
http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330Similar Questions
I traded my first for a new because the ESCAPE key got stuck sometimes and made a grinding sound.
Is this normal?
Like a spring, or something. Is that also normal?
This is normal and these pieces are important to ensure that the drive can eject properly and could remain in a good position.
Still, you will hear a short click Open and close the drive.
My DVD CD - RW drive does not work properly (power is there, but it does not appear on the system), I have temporary installed a drive of DVD - RW from my HP laptop which works very well.
I tried to run my restore disk (never used), but nothing happens (press and hold C to start). This will only work with the good drive installed or I do something wrong?
You know that not every disc is compatible with the device because of the csel/slave/master settings.
In this case, I would recommend to get into the BIOS, and there you can change the boot order.
However, this trick is everything works only if the new drive is compatible and supported
I put t think that the disc has been disabled!
You are getting error messages or what's wrong?
This happens if the lens of the drive cannot calibrate properly and can not handle the inserted media.
their documentation online and drivers and ask in their forums (if any) on the known issues.
a paper clip that will release him and the reader to open.
http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm
http://www.josepino.com/?open_cd-dvd_paperclip
http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_eject
You may need to get the driver to work 1 However, this could still work.
http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.html
http://www.YouTube.com/watch?v=wpWieIoBBrk
http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html
http://www.SevenForums.com/tutorials/433-disk-check.html
a process that solves the problem.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.
http://support.microsoft.com/kb/314060 - a Mr Fixit
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml
a Mr Fixit
http://support.Microsoft.com/kb/982116
http://support.Microsoft.com/kb/975270/
Windows Vista
http://support.Microsoft.com/kb/929461
http://support.Microsoft.com/kb/939052
http://support.Microsoft.com/GP/cd_dvd_drive_problems
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/
http://support.Microsoft.com/GP/hardware_device_problems
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.
correct registry entries for your car.
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.
CD/DVD drive someone with the same model.
http://Club.myce.com/
http://www.myce.com/storage/
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.
all devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html
a process that solves the problem.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.
http://support.microsoft.com/kb/314060 - a Mr Fixit
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml
a Mr Fixit
http://support.Microsoft.com/kb/982116
for Windows Vista
http://support.Microsoft.com/kb/929461
http://support.Microsoft.com/kb/939052
http://support.Microsoft.com/GP/cd_dvd_drive_problems
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/
http://support.Microsoft.com/GP/hardware_device_problems
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.
the correct registry entries for your car.
drive from someone with the same model.
http://Club.myce.com/
http://Club.myce.com/F61/
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.
http://www.NirSoft.NET/utils/device_manager_view.html
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">->Maybe you are looking for