DVD/CD-RW drive replacement

Is it possible to replace my Player DVD/CDRW with this DVD - RW drive as the active player is a panasonic... also is it correct colored bezel I but or can I transfer an existing one.

Hello

Replacement is possible, but it must be replaced with compatible player. Unfortunately the good info you can pick up just by the authorized service partner. Call them and ask what you can do.

Good bye

Tags: Toshiba

Similar Questions

  • Satellite P10-304 combo DVD drive replacement

    I need to know what combo dvd/cd-rw are compatible with my p10-304. It came with a sd-r2412, but it does not read DVDs more. I'm trying to get a replacement, but I must be sure that it will fit and work. can someone give me a hand? Thank you

    [Edited by: admin January 22 06 09:03]

    Hello

    You can find compatible readers on this site
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/options_and_accessories_search.jsp?z=16&service=EU & selOptionCategory = 4699

    for example the modular Bay DVD-R/RW Drive (PA3295E-1DV2)

    Good bye

  • On the Satellite A100-646 DVD drive replacement

    Hi all

    I want to replace the DVD drive on my laptop. (I never solved a lot of problems)
    Do you know if there is a list of compatibility for the A100-646 model?

    Model to suggest me?

    Thank you very much.

    Concerning
    Fabrizio

    Hello

    This info you can find in the document of the user s manual on page 7.
    I don't know which is placed in your laptop now but to choose one of the listed DVD super multi drives.

    Bye and good luck!

  • DVD drive replacement

    I have a Pavilion laptop dv6-1360us which I think has bad DVD player.  The drive will write on a CD but not a DVD.  I have tried all the "fixit" and recommended solutions without success.  I found the hot spare (DVD SATA optical drive - pn 511880-001) on the site of HP parts for about $ $90 but wonder if I should try to remove/replace the drive myself.  Does anyone have any suggestions or recommendations?  Are there instructions available for this task?  Thanks for responding.

    Hello

    How to remove the optical drive is detailed from Page 48 of your & Maintenance Guide.

    Kind regards

    DP - K

  • Replacement for HL-DT-ST DVD +-RW GWA4164B drive

    Does anyone have a recommendation to replace my DVD HL-DT-ST DVD +-RW GWA4164B drive?  I went to newegg.com but wasn't sure what IDE drive would work better in my Dell XPS 400.

    Thanks in advance!


  • Adding a new dvd/CD-RW drive does not work on my PC 4600

    Hi, my laptop comes with a standard cd-rom drive and I bought a dvd/CD-RW drive to replace. When I enter it it appears power because I can open the drawer and the light comes on when I turn on the computer. However it is not coming in my computer.
    I tried several disks so that the player I use is not defective.

    can someone please help me with what I need the dvd function on my laptop for my work.

    Thank you very much

    Tommy

    Hello

    New device is recognized by the OS? Can you use it at all? Is there an error message or is defrost just marked in Device Manager?

  • 1800 514 does not start with the new dvd/CD-RW drive

    My old dvd - rom on my toshiba s1800-514 drive was broken, so I had to replace it. I used an old teac as a temporary replacement cd-rom drive. but now, I bought a new dvd/CD-RW-drive combo (toshiba sd-r2612). but the laptop does not seem to post, I get the "toshiba" screen (when it says press f12 to select boot device). but it stops there and does nothing. I can open the player, it seems to be connected ok.

    Why won't it work? (only the bios setting which applies is one that I can't change...). the drive is nine ar so small chance it's already broken.

    What should do?

    Hello

    A few weeks ago one of my friends also had a problem with his replacement new drive. He wanted to move the DVD/CD player to a DVD burner.

    The only thing he had to do was change the master/slave settings!

    Goodbye Chris

  • DVD/CD-RW drive does not-Tecra A4

    Hi, I have a problem with my Tecra A4.
    My DVD CD - RW drive does not work properly (power is there, but it does not appear on the system), I have temporary installed a drive of DVD - RW from my HP laptop which works very well.
    I tried to run my restore disk (never used), but nothing happens (press and hold C to start). This will only work with the good drive installed or I do something wrong?

    p.s. I bought this second hand, but it's new. He had a damaged screen I have replaced

    Julian

    If the old drive will not read media if it s damage.
    You know that not every disc is compatible with the device because of the csel/slave/master settings.

    You said that the button C doesn't allow you to boot from the disc.
    In this case, I would recommend to get into the BIOS, and there you can change the boot order.
    However, this trick is everything works only if the new drive is compatible and supported

  • Re: Satellite A100-207 player of DVD-ROM must be replaced

    My DVD - ROM drive has stopped reading / recognition of the disks. It is not a case of needing a disc cleaner so I think it plays up and needs to be replaced. Someone has any advice / manuals etc. to know how to get chase him and the perils of trying such a replacement?

    I would appreciate all the advice really.

    Thank you.

    I tried once in my previous laptop, it is not as easy as a desktop PC, because readers of the laptop are not exactly standard.

    The façade of the new player was not properly aligned, and I could not transfer the front plate of the defective drive because the buttons and the clips are different.
    More it would work even without the façade, the laptop simply failed to detect.

    I think it was a firmware issue.

    So if you want a replacement, the best option would be to go to a Toshiba Service Center and replace the disk with a real. You may even be able to upgrade to a DVD-R/W drive.

    Are but before you replace the disk, you sure this isn't a software problem? It boot from the bootable CD?
    It may just be the upper/lower filters in the registry.
    Try this: http://support.microsoft.com/default.aspx?id=314060

  • Satellite Pro A120: DVD/CD-RW drive does not work

    Hello: the dvd/CD-RW drive does not work. apparently it has been disabled somehow! Any ideas on how I can turn it back on?

    Have you tried the Device Manager and it says it works normally!

    Any ideas please?

    Thanks :)

    > apparently it has been disabled somehow
    I put t think that the disc has been disabled!

    How someone or something should turn off the drive? You have disabled the drive? I don't think so!

    You said that the drive appears in Device Manager. So I guess that the drive is enabled and is recognized by the OS.
    You are getting error messages or what's wrong?

    Perhaps the reader can read or burn CDs or DVDs.
    This happens if the lens of the drive cannot calibrate properly and can not handle the inserted media.

    Maybe the replacement drive is required!

  • Satellite M70-192 - question of HARD drive replacement

    Hello...

    It's just my first time to ask for help in this forum... and besides, in any forum on the whole wide net.
    So, sorry if am don't do this right... that's...

    My brother bought a laptop (Toshiba Satellite M70 - 192 psm71e-01k00rar) of the Kuwait around 2006. A few months ago we started hearing "noise noise deaf deaf" - ing sound inside the camera and the screen is just deleted (there was an error message that is encrypted but I wasn't able to note it). I was able to boot from the DVD or USB drive. So I thought that maybe the hard drive has been the only problem.

    I put in a new HARD drive (a 320 GB western digital scorpio wd3200bevt) and started to reinstall the system (I forgot which of the 2 supplied Toshiba cd I inserted first - media cd or the windows xp CD-ROM) but in the middle of installing the keyboard area was so hot that I unplugged / stop the laptop immediately.

    After that, the HARD drive has become invisible to any Linux or rescue CD or utility of HARD drive that I tried to boot from... (fortunately?) The said HDD vendor as the HARD wd scorpio drive + really + defective and they replaced...

    * now the questions: * I discovered that the rated current for the HARD drive (60 GB) provided originally for the Toshiba M70 is a little bigger than the new wd scorpio *(.55 amp) *. Could this be the reason why the 1st WD Scorpion got "fried"?
    Is it a SATA1 - SATA2 question?
    How can I _properly_ replace/upgrade our laptop HARD drive?

    Please note that before I bought the new HARD drive, I ve read somewhere in the "net I could use a disk sata2 on a sata1 controller, etc. + * pls help!" * +

    Toshiba services are simply too expensive for me right now if will send it (cell phone) in a licensed shop. Why I'm in DIY mode that s. I don't think I can afford an another fried Scorpion!

    Thank you!
    yours,
    TAC

    > I discovered that the rated current for the HARD drive (60 GB) provided originally for the Toshiba M70 is a little bigger than the new wd Scorpion (.55 MPA). Could this be the reason why the 1st WD Scorpion got "fried"?

    I don t think that a larger and faster HARD drive might be the reason for the higher internal temperature.
    You said that you have heard and his strange "noise noise deaf deaf." Such sound could be created by the defective cooling module. A defective module could be responsible for the highest internal temperature

    > Is it a SATA1 - SATA2 question?
    Here's your second thread:
    http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=150272
    You can see that the SATA2 is compatible to the bottom and the s SATA2 HARD drive would work with common controller SATA HDD.

    > How can I properly replace/upgrade our laptop HARD drive?
    Replacing the HARD drive is not difficult. I see that you have already found the HARD drive Bay and bought a HARD drive.
    In your case I recommend using the common SATA 2.5 HARD drive with 100 GB maybe 120 GB.

    Welcome them

  • Year Error Occurred While ejecting DVD/CD-RW drive

    My dvd/cd-RW drive is recognized in windows 7 and said that the work, but when I go to open it, I get "an error occurred eject disc dvd/cd-rw" and nothing happens. Two days before that I had burned a recovery of AVG disk barely shoot a problem on another computer and everything's fine. The next time I went to use the error message appeared. I reinstalled the drivers and delete the upper and lower filters in regedit as recommended by Microsoft, with no result. Any help will be appreciated,

    I replaced e DVD/CD player and everything works fine now. The problem was the original CD/DVD drive has failed.

  • DVD/CD RW drive

    Why my DVD/CD-RW drive is not reading or playing a DVD of CD? It makes a noise as if he were reading the disc... then nothing happens.

    Hello

    Could be that the drive has developed a problem, try using a cleaning disc.
    Can be wear and must be replaced.

    =====================================================

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

  • DVD RW RAM drive turned into a CD ROM

    I am running Vista Home Premium (64 bit) on a laptop Acer Aspire 6930.  I discovered that my DVD RW RAM drive (IDE\HL-DT-ST DVDRAM GSA-T50N le05) turned into a CD-ROM drive. My system today described this DVD RW RAM drive as a CD-ROM drive.

    I tried to update, roll back, selection of the driver to be installed without success.  Device property details have changed.

    While searching on the web for a solution to my problem, I learned that I'm NOT the only person this transmogrification arrived. Unfortunately, I still have to learn a shy solution to reinstall my operating system.  Can someone give me advice or point me in the right direction?

    I don't really know what controls the parameters for installing the correct driver for each device.  I guess that the parameters are defined in the Details tab for the properties of each device.  I have no idea how I would do anything to change these settings, but I think that a potential problem lies.


    Thank you

    RGD123


    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Hello

    Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
    solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
    Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
    This will refresh the default driver stack. Even if the reader does not appear to continue below.

    Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
    slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
    Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
    that the troubleshooter does not, and those who "could" be the cause.

    Check with your system manufacturer Maker and device for possible firmware updates and the good
    Your player registry entries.

    Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
    other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
    a person with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • T61 DVD/CD-RW drive is unable to read and hangs

    Hello everyone, I hope that people still visit this area of the forums!

    I put highlighted and bolded the symptoms and make them easier to find.

    I recently bought a T61 6457-C15 on eBay and were in the process of setting up and customizing to my tastes. When I got the laptop, it looked as if Windows had been restored to the original state of the factory, as well as some free software, so I proceeded under this assumption. First of all, I used Windows Update to download all the updates that he could find including IE8. I wanted to have a program running on my computer before anti-virus I used a browser to access the internet. I ran IE8 and went directly to the Microsoft Security Essentials Web site and downloaded the installer. At this point, I tried to remove the Norton Internet Security pre-installed and expired using the built-in uninstall, but it failed. A message box jumped in saying that I needed to put the Norton installation disc in the CD-ROM drive so that the uninstall program can find a file of Norton support. My computer did not come with all discs, but my mothe had bought Norton 2008, so I took the disc and put it in the drive. The training started shooting immediatelyand the uninstall program found the file he was looking for in a few seconds. File support directed me to the site of Norton to get their removal tool, which has removed Norton from my system in the short term. Afterwards, I ran Microsoft Security Essentials install program and obtained MSE running on my computer before anything else.

    Then I went on the Lenovo Web site and he had my automatic detection system. That took me to the support page for my system, when I went to the page «Downloads & drivers» I downloaded the connections to access and ThinkVantage Toolbox for Vista 32-bit (my OS is Vista Business 32-bit). I then used Lenovo System Update to get all the updates that are deemed necessary to Lenovo, including those for itself and the software and firmware components system. There were 35 or updates more suggest, and I trusted the software, so I started downloading all. I don't know, but I think that an update of the DVD/CD-RW drive was included in the list, but I don't remember if it's auxiliary software, drivers and firmware. After the Lenovo system update was convinced that she had all the necessary updates, I downloaded Revo Uninstaller and began to remove my computer from uneccassary and unwanted programs and cut the list of start-up. I did not touch any components Windows or ThinkVantage, and I searched each of the programs online, so I don't know I have to not delete or disable all drivers or file system or something to Lenovo. I removed mainly produced Apple and software doesn't work on my system, including an integrated camera driver (my system doesn't have a built-in camera) and third-party programs that were already missing files or otherwise unusable when I got my computer. Until now I had used a gigabit ethernet connection to download the software; I had not used the DVD/CD-RW drive with the exception of the one time wherever I mentioned earlier.

    Now that I have my system set up for my taste, including customization and power settings, I started to install my first program: Command & Conquer the first decade since a DVD-ROM. When I put the disc in the drive and closed, it took a few seconds for the drive to the start and once he did, he was constantly running at high speed and I could hear the drive back quickly in perpetual motion. After a few minutes menu finally appeared disk installation, so I clicked on the button install. I waited several minutes, but nothing happened, so I tried to view the contents of the disc by going to my computer > DVD/CD-RW drive (D, right, click on and select explore menu. ) When I did, the address of the Workstation window bar began to fill with a dark and said gray progress bar "loading (D", I think that with the name of the player or drive after him.). After he took several minutes to fully complete, nothing happened. I waited a few minutes to see if anything would change, (Nothing in fact), I clicked on the X button in the upper right of the window to close. A few minutes and clicks later, the Workstation window was labeled as (not), and the window itself has become dimmed. I started the Task Manager and tried to close the my computer window, but the entire Windows desktop disappeared with her, saying that he will try to restart. Even the Task Manager became inadmissible and quit after you close the workstation. After a few minutes of watching my background (and nothing else), I've ejected the disk, and Windows Desktop reappeared immediately and acted as if nothing had ever been wrong.

    I checked the Device Manager, but neither the DVD/CD-RW drive, nor any of the ATA controllers have been marked; in fact, they all said that they worked correctly with the drivers updated. I ran the diagnostics of the Toolbox ThinkVantage on the disk using a data CD, a CD and a DVD-ROM are different, but in each case, the drive failed the tests and a message jumps to the top box, saying that the discscould is not read because they have been removed or there is a hardware problem. I checked the discs that both before and after I took them out, and they were not scratched; also, all disks are made editor with a company of software or music. I restarted my computer, started the Rescue and Recovery and Ran PC-Doctor from here option. I ran the same drive read tests with the same results of failure. All the time the car was behaving in the same way he had when he did not first read a Disc. Then I removed and cleaned the drive both inside and outside with a can of compressed air. I also cleaned the ultrabay himself. Finally I tried to fix it with Microsoft Fix It, but when it is automatically ejected from the car and I put a drive, the disk was stuck in the drive and Windows frozen as before. I had to restart Windows two times (once with a BSOD) to take out the drive. When the disc has been removed the computer is back to its normal operation once more.

    Please help me, my DVD/CD-RW drive is a Matshi your UJDA775, my operating system is Windows Vista Business and model number of my T61 6457-C15. I tried all the troubleshooting patches and none have worked. I tried the update drivers and using diagnostic software and they have not worked. I tried to disable drag-to-disc burning and it did not work. I have treid remove and clean the drive and that did not solve my problem. I noticed that the driver for the controller "Intel(r) ICH8M-E/M SATA AHCI" is the only related driver that can be undone, so maybe that could fix. I also wonder if a firmware change caused this, and if so, if there is any way I can cancel that. The only other difficulty I have heard of that I have not tried is changing the registry, but I hesitate to do so. I have not tried to boot from the CD drive because I have no bootable CD and I'm afraid that my computer can stay stuck in this mode. I hope someone can tell me what I can do to try to solve this problem, preferably without destroying my computer. Thank you for taking the time to read my post.

    P.S. Just adding a note; I went through the stories of the Microsoft and Lenovo update and related updates only I could find were: ThinkPad BIOS update utility easy ejection, driver Intel Matrix Storager Manager for Windows (32 bit) and maybe one of the Intel chipsets Support two Vista updates. I tried to roll back the driver AHCI, but it has no effect.

    Well, my problem is solved and here's how. I had some difficulty in finding how to contact technical support from Lenovo; online options directed me to the IBM support Web site, which was clearly designed for businesses. By selecting the option "Call technical assistance" on the Lenovo Web site and then selecting my country gave me a number of hotline 24/7. After about five minutes of waiting, a young boy by the name of "Tyrese" answered (I may be misspelling his name), but the connection was so bad that we could barely hear each other. Although he semed eager to help, when I told her my problem the first things he proposed were simple, like cleaning the disc, however, when I told him all my efforts, described above, to solve the problem myself and him read the paper since the diagnostic Rescue and Recovery program, after he checked against its computer database error codes quickly He said that the only solution was to launch a new drive. I was pleased to have secured such a resolution successfully appealed for support in less than fifteen minutes; Apparently, all the work that I did trying to fix it myself had paid off in a way. Unfortunately, although I tried to give my address for him, some of them stay out of the address label, which caused trouble to receive the new drive. Once I got it, I installed using the uninstall & remove (former player), stop, start, insert & install (new disc) method that I've referenced previously in this topic. I use the new drive since then without any problems, so I guess that the only solution was to replace the disk. Also, I noticed that the new drive is a Hitachi, maybe a T400/410 and T500/510 Ultrabay Slim drive, which should help to avoid the problems that other users have had with readers Matshi - ta more elders. I hope this description helps anyone else having a problem with the optical drives on the T61/61P.

Maybe you are looking for

  • Suddenly can't get images to open in my emails?

    I have Windows Vista Home Premium, service Pack2, Internet Explorer 8. The last three weeks I suddenly had problems to open emails from people I know who are trying to send me some photos. It takes forever to load first, and then I get this message:

  • How can I combine the 2 songs in MP3 format by 1 using Windows 7?

    You want to merge 2 songs in MP3 format in 1 song.  I don't want a movie, so Windows Live Movie Maker does not help because it requires you to assign a movie... help?

  • HTTP 400 response code

    Hello I'm trying to set up an HTTP connection with a Web site to retrieve some info and update my SQLite database. I use the MDS in my Simulator and I get a HTTP 400 response code when I try to access the web page. Just to test, I tried to set up a c

  • Still of Smartphones blackBerry is unable to open attachments.

    Hi, I posted a thread earlier of not being able to open attachments on a curve of BB uses. I have reviewed other articles on how to solve these problems; first sent service book, which did not work. Now, I just a security © e and re-authenticated wit

  • Restoration of shortcut "scan to pdf" HP Photosmart

    On my HP Photosmart I deleted by mistake, the "scan to pdf" as a shortcut to scan. How can I get to get to the software appears on mmy Office for reason, that for some reason, and where I have deleted the shortcut option.