DVD does not recognize disk

Similar Questions

• CD/DVD does not recognize the drive.

  CD/DVD does not recognize the drive.  Error message-"Insert a disk." "" "Insert a disk in the drive (E or F, depending on whether one in use).  I bought a DVD/CD thought exteranl today that might work.  Same error message with the external dvd/cd.  Can hear the disc turning when it is inserted during a short period of time, maybe 20 seconds, then it stops.  Sometimes, the disc is ejected when the error message appears, sometimes not.  Same results even with blank CDs.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Installation DVD does not recognize my internal HD on a 2008 iMac

  I'm looking for suggestions here.  My 94 year old mother has used the iMac 2008 8.1 for internet e-mail.  We needed to upgrade its OS X 10.5 to be able to upgrade to a new version of safari to access some banking sites.  I upgraded the memory.  Sister has an iMac with OS X 10.6.2 Installation/restore dvd 2010.  I went to update.  I have caused the initial problem because after reading info seemed I could create a second partition on the hard drive of 250 GB and use Time Machine to back up before preceding.  See not all the warnings on the addition of the partition. (Yes, if I had not forgotten my external hard drive I should not try that, but I forgot it.)  Things seemed to make the partition, but time machine bogged down and hung up.  After trying many things, I found myself deleting and resetting on the internal extended (journaled) using HD, recreating a single partition using the guidelines GUID, thinking that I could just do a clean reinstall.  BUT, while I can check/fix delete etc the internal disk utility when HD started from my external hard drive so I boot from the OS install DVD it does not recognize the internal HD.   ? ? ?   Gives cannot update this post Mac.  If I run the Setup from the beginning of the disk upward once again, no offers to go to in the installation program.  I can access everything in THE RUNOFF when the post boot drive.

  Why THE works on the internal HD of the post start up (which was made with the 10.6.2 installation DVD), but not when started to leave the DVD left me puzzled. The DVD is not just see the it.  When it is started from the DVD with the external drive, he sees very well.   You are looking for ideas, thank you in advance.  By the Way the machine had no problem before starting this :) live and learn!

  If I understand what you were doing, you tried to use a Mac installation disc and to update another Mac? Is this correct?

  If I am not mistaken, which simply does not work. The installation provided with Mac discs won't work on another Mac, the original installation discs are machine-specific.

• DVD does not recognize the drive after installing updates from micorsoft

  After microsoft updates have been installed on our system the DVD - RW drive does not recognize DVD or CD the drive tries to read the disc and then the door opens and DVD/CD is ejected and then it asks to insert the disc.

  Hello

  Please follow the methods.

  Method 1:

  Run the Microsoft fixit for the link.

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Method 2:

  Follow the steps in the link.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/314060

• my dvd does not recognize the UDF files

  My DVD will not recognize a video which is burned as a UDF. Is there something I can do to make it read these types of files?

  Hi James Major.

  ·         Did you do changes on the computer before the show?

  Follow the steps in the article.

  CD-ROM drive may not be able to read a disc in UDF format in Windows XP

• try to install the storage pool. Windows 8 does not recognize disks external wd 2

  I go to the storage space and try to create the pool.  Windows 8 does not recognize my 2 external drives of 2 TB wd.   I can load files and cannot get the readers in the Explorer of files, but could not create the storage pool.

  The following site can help you create a storage pool:

  http://www.bleepingcomputer.com/tutorials/how-to-configure-storage-spaces-Windows-8/

• CD/DVD does not recognize football manager 08

  Hello. I just bought 08 but football coach when I put it in my CD/DVD drive on my Toshiba laptop, nothing happens.

  I can hear the disc inside it turn around and all that clicking sounds, but the game does not work on my computer.
  When I have the game inserted, the driver cannot see that there is a disc, it's as if there is no game inserted.

  Someone knows how to fix this?

  Hello!

  It looks like that your CD/DVD drive is faulty. I think that this has nothing to do with the game because you said sometimes it recognizes a game or a CD.

  You have a Satellite L300 and L300D?
  On my Satellite L300 I never had problems with the driver.

  However, have you installed the laptop with the recovery disk or Microsoft? Maybe a reinstall of Windows could solve the problem.
  In the worst cases, the disc must be replaced.

  Good bye

• CD/DVD does not recognize the disks and will not be closed

  original title: problem with tray D

  I use a unit of reconditiioned Dell 8300 with XP Professional system.  The unit was slow and gel a bit so, in one of the slow itls break cycles I insereted in the toolbar an old XP disc I had to front to see if that would help and after I closed the tray I noise loud crash and the tray came out showing broked pieces of the disc. I flipped the unit and hit the bottom and more pieces of the disc came out.  Now the set is not closed.  If I insert a workable disc and maintain status bar tap it will not do anything and a window tells me to insert a disc. Shou ld I try to disassemble the unti to see if there's still some piece or pieces preventing reset the tray? Or is it to say that I'm going to my repairman authorized Microsoft for the rerpair?  E-mail address is removed from the privacy *.

  I'm really sorry to laugh, but this is a funniest post I've ever seen. Apparently you've damaged the device rom (cd/dvd drive) replace it with a new one. They measure less $ $30 .00usd. Furthermore, placing the old drive in the drive xp will not improve the performance of the computer. Looks like you have some malware. I recommend that you post in the section virus/malware of the forum on the link below for a complete analysis. The forum is free. While I could recommend some scanners, I think you need a full inspection.

  Free Forum: repair-Bots Online

• DVD player does not recognize disk ERROR "Please insert a disc into drive F".

  Any disk I put in DVD Player my cell phone, he won't play. If I go to the file in Windows Explorer and click on DVD RW drive (f :)), it ejects all that is currently in the player, saying: "Please insert a disc into drive F:." My computer is a Lenovo 4334 of model and model number HuronRiver_CRB. It runs on Windows 7. Can anyone help?

  Try: https://support2.microsoft.com/mats/cd_dvd_drive_problems/en-us

• Computer laptop Inspiron/Studio 1535 cd/dvd does not recognize is not the disks

  I got a TST Corp DVD +-RW TS - T633A drive that has suddenly stopped working when burning discs & doesn't recognize any disc (CD or DVD) - checked & ugraded BIOS A03 to A05, checked (software so far tp) drivers, checked in the Manager of hardware (device operating properly).  Ran a start-up test & got this error code 0F00:137 B, Msg: DVDRW_1 - Media Player is missing or empty.

  What I'm missing here?

  
  

• DVD players & rw does not recognize disk

  WindowsXPHome, new drive empty, when the disc is inserted in the drive, we get the message "there is no disk in the drive.

  
  

• Driver CD/DVD does not recognize CD DVD and wants to get in shape if I double click on it

  Hey all

  I have a proplem with my CD/DVD driver. I insert a game and executing the autorun istead, it does nothing. I go to my computer (the icon of course) and instead of the icon of the game, it shows the icon of pilots and show the size of my game CD. I double click on the driver icon and it tells me to choose a name for the blank CD (that game). What is going on? He had once again and I had to format my laptop to make it work, but I want a more reliable solution

  Hello

  Be sure to run checkdisk as shown above.

  ---------------------------------------------------

  Many files that SFC cannot resolve are not important.

  Start - type in the search box-> find CMD in top - click right on - RUN AS ADMIN

  put the command from below (copy and paste) in this box and her and then press ENTER.

  findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > sfcdetails.txt

  who creates the sfcdetails.txt file in the folder that you are in when you run it.

  So if you're in C:\Windows\System32 > then you will need to look in that folder for the file.

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  in Windows Vista
  http://support.Microsoft.com/kb/928228

  This creates sfcdetails.txt in C:\Windows\System32 find and you can post the errors in a message
  here. NOTE: there are probably duplicates so please only post once each section error.

  You can read the newspaper/txt files easier if you right click on Notepad or Wordpad then RUN AS ADMIN - then
  You can navigate to sfcdetails.txt (in C:\Windows\System32) or cbs.log (in C:\Windows\Logs) as needed.
  (You may need to search sfcdetails.txt if it is not created in the default folders.)

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• A315 satellite - DVD does not recognize DVD

  Having a problem with my DVD on my Satellite A315 drive.

  He will recognize CDs and data discs, but is unable to recognize the DVDs. When I insert a DVD, the disc spins like crazy, but nothing happens. If I go to Windows Explorer and try to expand the DVD folder, it asks me to insert a disc.

  thoughts?

  I think you should try to remove upper and lower filters as Akuma said.
  Here in the forum I read often that disassembly of the filters can solve problems with a CD/DVD player, so in your case I would try it.

  Here is the article in the Microsoft Knowledge Base:
  http://support.Microsoft.com/kb/314060

  Good luck!

• creating Windows dvd does not recognize the music in my itunes library

  I'm trying to finialize the title page for a slide show I did in windows movie maker, which includes several songs from my itunes library, but it will not be recognized all my itunes files. It allows me to choose the sample songs in the music folder however. any suggestions on how to add my music?

  Windows, be it the media player, movie maker and DVD maker, do not accept MP4 file formats.
  Windows do not accept Apple file formats, be it video or audio files.

  Here is the list of formats of audio files supported by Windows:

  • Audio files: ".aif", ".aifc", ".aiff", ".asf", ".au", ".mp2", ".mp3", ".mpa", ".snd", ".wav" and ".wma".

  Your itunes MP3 Google for an audio converter and change file formats. Then re - import to Movie Maker.

  PS You can bypass Windows Movie Maker... as the title of your message create dvd windows says.
  Use Windows DVD Maker and add your items directly in the creation of DVD.
  You will still need to convert the audio files to itunes.

  Windows DVD Maker user guide

  http://www.windowsvistauserguide.com/windows_dvd_maker.htm

• Windows7 dvd creation does not recognize my dvd burner

  I have windows 7 pre-installed on a computer inspiron dell less than 2 years.
  Create DVD does not recognize my DVD burner. Roxio, and DVD Styler.
  Also, in the computer, the dvd drive is not listed in the left side, but he is on the right side.

  Hi Luboceric,

  Thanks for the reply.

  I suggest you to update the drivers from cd/dvd and check the status.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  You can also uninstall the driver and reinstall the driver to check the status. You must contact the manufacturer of the computer for the driver updated and appropriate.

  Feel free to post your request here on the Forums of Windows, we would be happy to help you.

  Thank you.