DVD Drive Power Off and does not restart

Similar Questions

• Laptop frequently is off and does not restart even when the Start button / stop is held in

  I have a notebook dv7-3060us running Windows 7, some mornings (every few days or weeks), I find, powered out and does not.  In press and hold the power button for 5-10 seconds has no effect.  I have to unplug and remove the battery to restart.  What happened several times.  I tried it with the battery removed, and it fails again, then.

  A software problem can cause this?  I thought that holding the power button causes a material interruption and the BIOS takes over.

  Is there a known hardware problem which can cause this?

  Thank you

  Adam

  Hi Sean,.

  Thanks for the suggestion.  Unfortunately, the steps listed for a hard reset was precisely what was needed to market every day.  So, we did about 50 times.  The real issue was whether a software problem could cause the phone to require a hard reset every time.

  After not getting no response for a few weeks, I have restored your computer from a backup, I made after the update in the first place and then re-set everything.  So far, it has remained stable, which brings me to the conclusion that it is, in fact, a software issue.

  Kind regards

  Adam

• My IPad sudenly turned off and will not restart. It is fully charged.

  My IPad sudenly turned off and will not restart. It is fully charged.

  What you have tried so that he could begin until For example you soft-reset/reboot trieda? Press and hold the home button and sleep for about 10 to 15 seconds, then the Apple logo will appear if all is well and it will start.

• USB-6009 DAQmx meter task stops and does not restart when you restart the VI

  I have the task of counter DAQmx which "hangs up" while troubleshooting a VI and does not restart when I restart Traoré.  See attached fragment VI.  The counter works reliably in normal operation, but some combinations of interruption and running "highlighted" causes to stop work.  It's in LabVIEW 2009.

  It will restart if I close the VI and reopen it.  However, this causes losing me my window probe laboriously built with ten

  the probes.

  Is it possible to re - initialize a DAQmx task without closing the VI?

  This significantly slows the troubleshooting.

  As an alternative, if anyone can suggest a way to preserve a probe Watch window after closing of associated VI, it would be a work around.

  Please do not take into account.

  Counteract the work of task - it's the rest of the program which is hung up.

• Printer not print indicating the print spooler is stopped and does not restart

  Original title: printer does not print

  The print spooler is stopped and does not restart. I have a laptop with Windows 7 and the printer is a HP Officejet 8600 (network). My wife has the same laptop model and has no problem with printing. Any help you can give would be welcome.

  David Torres

  Hi David,

  Thanks for posting your question in the Microsoft Community.

  I understand that this printer not print indicating the print spooler is stopped and does not restart. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  . Have you made any recent hardware or software changes to your computer before the show?

  Please follow the methods and mark the question below:

  Method 1:

  Step 1:

  Run the Microsoft Fix It from the link below.

  Diagnose and automatically fix problems printing and printer:

  http://support.Microsoft.com/mats/printing_problems/

  Step 2:

  Follow the steps in the link below.

  Printer in Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:

  You need to check if the Printer Spooler service is started from services.msc.

  a. click Start, click run, type services.msc.
  b. double-click the print spooler and verify that the status is set as Automatic or Manual.

  c. right-click on print spooler and click restart.

  Your response is very important for us to ensure a proper resolution. Please get back to us to help you accordingly.

  I followed method 2 above. When I Rt click Spooler printer restart remained gray when I click on START, I get the message "Windows failed to start the service on local computer print spooler.   ERROR 1053 the service did not demand launch or timely control.
  What can I please?

• Satellite P300 question, shuts down and does not restart intermittently.

  My wifes p300 presents a very confusing and annoying problem. She is now on her 3rd replacement the last two having the same problem.

  I just turned off intermittently for no reason, a few times, it will restart but sometimes he used. So if I remove the battery and plug in the power that it restarts again however it then turns off again and do not restart unless the battery is returned. I think it may be a problem with the battery and the power cable as she said that the problem will only get worse if the computer will run on battery power for a while.

  I was wondering if anyone else has experienced this problem or had any suggestions as to what could be the problem.

  Bill has soon

  Hello Bill and please describe your opinion on this subject. Reading your first post I ve also thought it should be overheating issue, but after this second announcement, I imagine that the food may be responsible for this turn off suddenly question.

  Please post the results of the investigation. It can be really interesting to know what the problem is here.

• CD/DVD ROM shows disabled and does not work under Vista

  My CD or DVD drive is not reading or writing and is indicated as being disabled, how can I enable them again?

  * original title - my CD or DVD drive does not read or write and is shown as being disabled, how can I enable them again? *

  http://support.Microsoft.com/kb/982116/en-AU

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• drive hard beep and does not

  I have a laptop E1 571 and have been using it with win 10 since its release, had minor problems, but the day of Christmas (from everyday) my hard drive started to make beep sounds and load, only to start menu screen but the hd does not!

  Photo of the scene, taking pictures of the fam on Christmas day and need to load them onto my laptop so I continue to put my mem stick in laptop, copy photos anywhere on disk, but by the time finished my laptop decided to crash. I rebooted it without any problem, but the laptop moved it crashed again and did not the acer logo screen, before you tell me, I have a pxe - e61 media test failure blah blah blah (this is after I have F2ed the hell out of it and changed to the legacy bios.)

  I tried to see if the hard drive would work on my pc, but it made the same beep and does not appear in 'my computer '.

  Do I need a new hard drive or I can solve this problem by using backup/restore discs? I will need to buy or download Acer?

  a HARD beep disc is a symptom of death.

  You can only buy a new HARD drive.

• HP Pavilion DV6-2113sa - gel and does not restart.

  Hello

  Sorry, my first post is for help, but I tried to use the really useful post here to diagnose my problem, but I am always sick.

  The problem is that my laptop is freezing up at random times. I've had my laptop for almost 2 years and take care of her well enough although I use it a lot and I had no problem either until a couple of days, when my laptop started to freeze.

  First of all, he does everything on Skype and continued to do so while trying to play a game or surfing the internet. It often freezes when I did click with the mouse, but during a game, it will freeze just by itself.

  During the freeze, nothing responds, and the laptop must be stopped manually. However, if I try to re charge the laptop immediately, he cut all trying to re load and a 1 beep. It seems that I have to wait a minute or two before it is re-load. Another thing I noticed is that if I try to reboot the laptop, it will stop, but once he begins to recharge, it will cut making the same noise beep short 1 and I have to wait several minutes before it shuts down again.

  After talking to a friend who knows more about computers than me, he said it could be the hard drive needs reformatting. I have recorded on my external hard drive and reformatted the laptop provided that the sale to the retail/factory.

  However, he then frozen again while transferring elements of my Ext. HDD.

  I ran a test of memory with MemTest86 who finds no problem and I ran a fitness Test of the disc on the hard drive which has not found no problem either so I a sneaking suspicion that it's unfortunately the motherboard.

  I tried to recover the system new return to the condition of the sale to the retail/factory because the first time I did it, the screen went black while reloading the laptop for 10 minutes so I stopped it manually. He then reloaded after a few minutes of waiting, but as stated, it froze later.

  The last thing I tried was a hard reset and so far this morning of the writing, the laptop has not frozen, but I'm not holding my breath that it's the end of my problems.

  Speccy using, here are my coordinates Tech. :

  Operating system
  MS Windows 7 Home Premium 64-bit
  CENTRAL PROCESSING UNIT
  AMD Turion II Ultra M620 79 ° c.
  Caspian 45nm technology
  RAM
  4.00 GB Dual-Channel DDR2 @ 399 MHz (6-6-6-18)
  Motherboard
  Hewlett-Packard 3636 (Socket S1G3) 79 ° c.
  Graphics
  Monitor generic PnP (1366x768@60Hz)
  ATI Mobility Radeon HD 4530 Series (HP)
  Hard drives
  488 GB Hitachi Hitachi peripheral HTS725050A9A364 ATA (SATA)
  Optical drives
  HP DVD RW AD - 7586H ATA Device
  Audio
  IDT High Definition Audio CODEC

  About the temperature of the CPU and motherboard, it worked between degreesC 78-92. What is a safe temperature for an II Ultra of AMD Turion?

  The next thing I will try is cleaning the fan from dust using compressed air to see if that cools down the system a little more.

  But as I tried to more advanced options, without success, I feel this wont change anything but I guess it's worth it.

  Apologies for having written a book here, but I thought the most information I provided, the advice/a more accurate diagnosis could be envisaged without having seen the phone in person.

  Does anyone have any ideas of what I could do next, or if they feel that it is the motherboard at fault?

  I have the laptop for repairs (07/04/12) Wednesday, but obviously if it can work again to normal, so it allows me to save a lot of money and hassle!

  Thanks a lot for your time to read this and help in advance!

  Go to Power Options and check the power settings. Give the setting balanced to try. These times are too high, if you just do something light like surfing on the web.

  Your next step: cleaning your laptop of flows and vents is a very good.

  Search the dust or pethair.  Use a can of air compressed to clen the vents. You can buy boxes of air compressed at stores like Walmart, Bestbuy and similar in their departments of PC.

  What are the ambient temperautures where you use Notepad?

  You can be at the point of needing to replace the processor thermal interface materials. That's something normally better done by someone experienced with laptops. If you are willing to take the risk, there are sites like Insidemylaptop , where you will find tutorials on how to disassemble your laptop to replace the equipment of thermal interface of high quality such as OCZ Freeze or Arctic Silver 5 thermal material.

• Satellite C650D - Activate Wi - Fi is turned off and does not turn on

  Computer laptop Satellite C650D 006011 will not Wi - Fi switch on, even by Conectivity doctor or Instructions from Toshiba. F8 key does not appear on the monitor when the FN key pressed to activate a Wi - Fi connection.

  Laptop is about 12 months, a Wi - Fi connection worked initially. Have reinstalled the Wi - Fi drivers in an attempt to activate the e-mail... always to turn on Wi - Fi to connect.

  If the WLAN card is listed correctly in the Device Manager you should not reinstall WLAN driver. Driver WLAN has nothing to do with ON / OFF feature.

  > F8 key will not show on the screen when you press FN key
  Your problem is not WLAN driver and the functionality of the FN.
  Add the value of Toshiba install package.

  I can't get it for you because the description of the model 006011 C650D is unknown to me. Please recheck the model name and model number. You can find it on the bottom of your laptop placed on the sticker of Toshiba.

• Please advise? My 6s close and does not restart.

  Hi there my iPhone 6s + death randomly on me. It is around the age of 3 months and I had no previous problem with him. Any advice?

  Force restart your iPhone...

  Press and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple logo.

  If this does not help, charge the battery to 100% and then restart. Do not use the iPhone while it is supported. It will load faster.

• Problem: My computer hangs and does not restart after the installation of MS Update KB2479628.

  Tuesday February 11 I turned my hp Compaq nx7300 off I saw that she was installing updates I thought that nothing of what I had set to automatic updates. On Wedndesday that I have tried to re - turn on my laptop it installed updates. I got a black screen with white writing. The laptop then ran restoration of boot, but he was not able to repair itself and turns off. I tried to turn it back on a few times that I was in total disbelief that a MS Update would do this to my computer, it still does not.

  I tried to start the computer in safe mode, but it does not work.

  I tried to do a system restore but evertime I tried it there was an error, I tried all eight restore points but all back "an unspecified error occurred during system 0x800700b7 restore.

  "In restoration of start I clicked on ' view diagnostic and repair details" it said all tests have been performed with success, but at the bottom it says ' root cause found - boot critical file D:\Windows\system32\ntkrnlpa.exe is corrupt.

  I had to reinstall windows 7 pro three times so far and have now developed to the point that it is KB2479628 update of MS that is causing the problem. I the have not installed this time and have had updates to the manual

  What can I do about this problem, I spent at least 20 hours on this problem now, and looking for the many other forum of people seem to have similar problems. I'm worried that KB2479628 will settle by accident when I want to install some other updates?

  My computer laptop originally had Vista Business top but has been upgraded to Windows 7 32 bit, clean install, I use Microsoft Security Essentials, I've never had installed norton or macafee.

  Thank you very much for all your time and your help is greatly appreciated, I'm sure I'll be at the time when SP1 is available.

  Until then your your :-)

• iPod Touch 6 (bought new 5 months ago) stops and does not restart and battery does not charge.

  iPod Touch 6 stop at 14:00 hours today.  Impossible to re - start the machine.  connected to the charger and nothing that.  the unit was purchased 5 nine months ago.

  Try:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• Why is my menu clip off and does not not to premier pro

  the clip menu appears inactive how can I turn it back on? index everything, cause I wish you know how?

  Select a clip. I see that a clip is selected in the project Panel, but this Panel does not have focus, and no cutting is selected in the timeline panel, which has the focus.

• Stop laptop on its own and does not restart

  HP Pavilion dm4-1265dx shut down on its own.  Tried a normal reboot nothing helps.

  Tried to restart with diet only... then only to batteries... both without success

  Tried to push the start for 30 + dry with no battery/power button, then restart as online 2... Nothing helps

  looking for other ideas?  before requesting an autopsy

  Thanks in advance for any help

  Hey stueve2002,

  I'm sorry that you run in the no power problem! The first thing you want to check is your power cord. If the AC adapter is good (and it is plugged into a wall outlet good), turns the light on the computer next to which connects regardless of the State of the rest of the computer. Let me know if this (see the example below image) light or not.

  

  If it's light off, try a different outlet. Try one that has a work lamp or other device currently connected. If you have one available or try this adapter to another computer to see if it will fuel another computer, try another AC adapter. Check the connection of the DC end of the power cord in the power brick (big block in the middle of your power cord). Shake it and listen to the sounds of rattling. Check the entire cord for any damage.

  If this light is on, you see everything for example Caps/Num Lock lights flashing lights? If this isn't the case, does nothing when you press the power button? Don't you hear the fan, hard drive and the optical drive from spinning? The bright light? Nothing flashes on the screen?

  If you see signs of life at all (rotation of the fan, etc.), you can try to connect the computer on a secondary monitor to see if any picture on this subject.

  You can also try reinstalling the RAM. If you have more than one stick, try to use just one stick at a time in each slot to rule out the possibility of a bad location.

  Let me know what you find. I'll keep an eye out for your answer