DVD drive won't burn DVDs

Similar Questions

• Combo DVD - RW drive won't burn a disc

  All of a sudden yesterday after burning DVDs my DVD - RW combo drive won't burn a disc. I tried to run the Microsoft patch for CD DVD stuff and he said:

  the selected disk is not able to write, if you have multiple CD DVD players try to use another drive, otherwise you may need to install a CD DVD burner to burn with Nero, it says: this device needs a DVD R/W... and the fix format disc, it says the drive is not capable at all.  Also, when I go to the drive in my computer, it shows the drive as a CD drive.  I replaced the Combo drive with a new one and still have the same issues. Help!

  Hi Mkadv,

  ·         Have what Microsoft Fixit you tried?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: CD-DVD combo drives have two lenses to write CDs and DVDs, respectively. First check with the manufacturer of the computer if the glasses are intact.

  Method 2: To diagnose and repair problems with your CD or DVD drive when trying to read or burn media automatically.

   

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems

   

  Method 3: The article below describes how to troubleshoot common problems that may occur when a Windows XP-based computer cannot read a CD or a DVD in a CD or DVD drive. This article contains several methods that you can use to try to solve these problems, and it also includes some advanced troubleshooting steps.

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  http://support.Microsoft.com/kb/321641/

   

  Let us know if that helps.

• My CD drive won't burn

  My CD drive won't burn a cd, it will try to burn them and then writing on the cd it says: an error has occurred. How can I solve this problem?

  Hello

  1. What is the full error message you get?

  2. what type of disc you are trying to burn?

  3. when the problem started?

  4. have you made changes on the computer recently?

  I suggest you try the fix it from the link given below and check if it helps.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Hope this information is useful.

• CD drive won't burn dvd or read burned dvd but will play store bought dvd

  TSSTcorp cd/DVGW-ts-h652m ata device, it's my player to cd for some reason, I can't burn cd/DVDs, but the reader will read these and play them, also it won't read burned DVDs, Noah he reformatted dvd, how can I solve this problem

  Hello

  Have you tried to close all programs and then insert the disc in the drive?

  You have disk problem as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read).
  Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  CD have a tolerance + - and you have to write on the side outside their tolerance. They can be given
  However, it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  -----------------------------------------------------------------------

  Try this troubleshooting:

  Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• dvd/cd HL dt st gh15f drive won't burn CDs

  This DVD/CD player provided with my Acert AX1200-ED5200A desktop computer.  The CD/DVD drive will burn DVD but stopped buring CD - however, she plays a CD.  If you insert a blank CD into the drive, it freezes the computer and any program that you use to burn the CD.  I tried to uninstall and reinstall the player - who has not worked.  I looked for new drivers - it has the most up-to-date.  Any ideas?

  Hello Daisiemazy,

  ·         Remember to make changes to the computer before having this problem?

  I suggest that you run by following the below Fix - it. This will automatically diagnose and repair problems with your CD or DVD drive when trying to read or burn media:

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• DVD drive won't burn CDs?

  I can't copy of CD. I tried to copy an audio CD by using Windows Media Player 10 and Sonic Record now Toshiba, but at the same time produce an error towards the end of the combustion process.
  I reinstalled the driver DVD and reinstalled Windows Media Player, but these measures are not addressing the problem.
  Someone at - it other suggestions that might help?

  Thanks in advance, monkey

  Hello

  Try to remove the preinstalled software from Sonic and use Nero. I used Nero on many models of different laptops without any problem.

• s parts, DVD, cd but DVD drive won't burn does not recognize any cd loaded into it?

  

  I want you to try the upper and lower filter thing (link below). Often, this fixes the problem with DVD burners recognizes only not DVD discs.

• Satellite P10: The drive will not burn DVD

  Hope someone can help me,

  I have a Toshiba Satellite P10 and have just received some photos software, burning
  But my drive will not burn DVD, I try with discs DVD - RW which must work my laptop.
  What is happening is when it comes of the burn on the part of the disk of the process he starts, but it fails.

  I tried to burn it with Nero, but even if I burn OK on any CD discs with this software it will not work on DVD discs. It's really annoying because when the burning process it fails so that it makes the DVD - RW disc seem curupt and then my drive has problems mounting the disc to try a deletion once more.

  I have the Nero log file failed
  Done if it's any help to anyone.

  A big thank you Michael.

  Hello

  What about different DVD media? Have you tested the media DVD-R or DVD + R common?
  Have you tried different brands of DVD?
  I can't give you a properly answer why the drive can't burn your DVD - RW, but to my knowledge not every media is supported by the player.
  So I think you should check different DVDs.

• Can someone help me? I have a dell windows vista and the cd/dvd drive won't work correctly. Whenever I have insert a cd/dvd, it takes forever to read, and it ejects itself. Why?

  Can someone help me? I have a dell windows vista and the cd/dvd drive won't work correctly. Whenever I have insert a cd/dvd, it takes forever to read, and it ejects itself. Why?

  Hello

  Detect and automatically fix problems of CD/DVD
  http://support.Dell.com/support/topics/global.aspx/support/DSN/document?c=us&l=en&s=Gen&docid=56A1F87CD8895B0EE040AE0AB7E15FFC

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Encoding and the work of converting very well, but won't burn to dvd?

  Hello, I tried many suggestions as well as procedures standard to try to solve my problem, but my dvd will not burn again :(

  This (assuming) started after my wife somehow deleted my user account from the computer (HP dv6704 nr laptop), I put a blank disc in as usual (after redo my user account with all the links, etc.) and conversion went well and is attesting that burn is 'Excellent' or well ya know, tried it with my fav ConvertXtodvd as well as factory Windows Movie Maker and says 'burn is good. " , but nothing to do? It is the first time that I had a problem in 3 or 4 years procedures. I tried deleting the upper/lower case filters, startup repair, remove to let drivers update automatic, changed versions of the burner that I use in case of default, etc etc...

  I don't know there is something simple that miss me that the cd take very well, please help someone?

  Using CCCP codecs (although convertX has no need of em) and threw a po filter AC3... uh, running VISTA HOME PREMIUM (came installed) and the burner is a TSSTcorp CDDVDW TS - 632N ATA Device.

  Someone help me please, my little ones like the video I do em, and I do too :)

  Hi jedjoe24,

  ·          You receive an error message when burning?

  When you try to burn videos or movie from Director of Windows, use Windows DVD maker to burn to DVD.

  Method 1

  Uninstall any third-party DVD burning software installed on the computer and try to burn.

  Method 2

  You can try to reduce the burn speed and check.

  1. open Windows DVD Maker.

  2. on the page, share your memories on a DVD , click on choose of pictures and videos.

  3. in the Add pictures and video to the DVD page, click Options.

  You can change the following settings in the dialog box Options of DVD :

  ·          DVD burning speed. This option allows you to select the speed to burn your DVD. The default choice for this option is faster. Some DVD burners won't burn at full speed using some types of DVD. If you have problems burning discs, try selecting medium or slow.

  Change Windows DVD Maker DVD-Video settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-DVD-Maker-DVD-video-settings

  Method 3

  Make sure that the DVD burner is properly connected to your computer and powered, and that all the necessary software drivers for the DVD burner are installed. You can check your hardware settings in Device Manager by following these steps:

  1. click on Startand then click Control Panel.

  2. click on hardware and sound.

  3. click on Device Manager.

  Make sure that the video you are trying to burn are not damaged. To see whether the videos you want to burn are corrupted, try playing or viewing with Windows Media Player. If the files do not play with the player, Windows DVD Maker cannot burn.

  Solve problems with creating a DVD-video using Windows DVD creation

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why windows 7 won't burn a dvd Iso or even video file for me?

  I use the cyberlink dvd software that came with my windows 7 PC, but it won't burn a disc for me at all. Be it an ISO or video file is there anything I can download to address and solve this problem? If so, please link me to the top.

  I do not think that the program burn ISO (if you double-click on an ISO), thing of ISO of windows 7 should appear. Then you can burn it. I do not think that it burns DVD either t - it. He plays the

  Use DVD maker, which is part of Windows 7 (that's if it can load the video format you have)

• LOOKING FOR DVD DRIVE FIRMWARE W. 7. PRO DRIVE WILL NOT BURN

  MY OPTICAL DRIVE WILL NOT BURN OR FORMAT, IT WILL READ.  IT ALSO DESTROYED RECORDS. The M/S FIXIT TOOL DOES NOT HELP. TRY TO FIND THE FIRMWARE for a (STANDARD) OPTIARC ad - 7540a PLAYER PERSPECTIVE.  I LOWERED THE WRITE SPEED, OFF THE DRIVE AND REACTIVATED, WITHOUT SUCCESS.

  AN A6020 FUJITSU NOTEBOOK, ORIG. WITH VISTA AND UPGRADED TO WINDOWS 7 PRO.

  will follow your advice and get a USB key.       Ernie g

  Definitely recommended, and they are bootable too. :)

• Windows Media Player11 won't burn CD (O/s Windows XP home) said I need a burnner, when I use another burnner program, it uses the burnner installed in my p/c. What is the solution?

  Windows Media Player11 won't burn CD (O/s Windows XP home) said I need a burnner, when I use another burnner program, it uses the burnner installed in my p/c. What is the solution? Tried all the easy fixes.  IMAP burning is on auto. (services.msc) what's next?

  Hello

  1 how long have you been faced with this problem?
  2 do you have you can all changes on the computer before this problem?
  3. What is the full and exact error message?
  4 have. what troubleshooting steps you tried?

  (1) check that the CD burner is properly connected.
  (2) wipe the drive and check that it is not damaged.
  (3) try a different brand of blank discs.
  (4) if another program is currently burning files on the CD, wait for the burning process is finished.
  (5) quit other programs that may be using the CD burner.
  (6) restart Windows Media Player.
  7-restart your computer.
  (8) try to run the fix it tool to the article below and check.
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/
  (9) uninstall all third-party CD/DVD burning software and check.
  http://support.Microsoft.com/kb/307895

• M30X bios does not detect the hard drive, won't start HD

  Can someone help me in this problem.

  My satellite m30x hard drive won't boot, rather trying to boot from the network.

  Tried to load the installer by default, and Hd will not appear on the settings

  tried original reistal toshiba software CD and the message that no target disk appears

  Is this really a hardware problem, some conection fisical damaged, or is it a bios problem

  Thanks in advance for some light on this problem

  My M30x has the same problem. I just used 2 months.

  I sent it to the repair center as I was told to do, because it has guaranteed.

  I'm still waiting for a response from them. I don't know what caused it.

• Pavilion DV9008DR Nvidia coprocessor SMU driver won't load

  After finding drivers almost everywhere, I met several for the 340 Nvidia nForce / GeForce 6150.  Some are for Vista (from HP), a set for Win7/Vista from Nvidia itself.  All have one thing in common.  The 'coprocessor' remains 'driverless' after the Nvidia installer is done.

  Looking at the PCI device ID, is seller 0x10DE (NVidia) device x 0271 coprocessor (nForce System Management Controller).

  The driver load without difficulty in XP, but the updated driver won't Win8.

  A thought has this load manually through Control Panel Device tool as an update of the driver selected with its .inf file.

  It is a driver that this continues to be a complete installation.  If it will not charge, what will be missing.

  Dan-

  I do not quite know compatibility mode, but I've done the following with the NVidia 15.49_nforce_winvista_win7_32bit_international_whql.exe driver package that is very similar to sp36079.exe

  1. launch the .exe.  As before, it loaded everything except the NVidia coprocessor driver.

  2. went to the Control Panel Device Manager

  3 find the coprocessor and went to properties-> Driver-> update driver.

  4. browse for the file SMU in the .exe 'burst' (including the .inf, .cat, .sys, etc.

  5A accepted.

  6. received the message that this driver installed.

  7. looked in Systedm devices and found nVidia nForce PCI System Management.

  8 looked the driver version and found it wasn't NVidia, but Microsoft, Date of 06/21/2006 driver Version 6.2.9200.16384

  If something happened, but no idea what it means.  (maybe the driver was already there, but need to Win8 "inviting them to find it?)