DVD drivers have become invalid - microsoft unable to detect the ID

Similar Questions

• HP PhotoSmart C4450 All in One Printer is unable to detect the alignment (tried everything) page

  My question is very simple. I tried all the options I could think for my printer detect the alignment page and it is still unable to detect the page. Can someone who has had the same problem please send me a list of recommended procedures to solve the problem? I intend to go through one by one until it is resolved. The post that I found with this exact topic didn't have a sufficient response that other that the user placed a bunch of papers on the page alignment and the printer worked... Could really use some help, my patience is pretty much exhausted. I use a MAC Leopard operating system. Thank you.

  Hi drubio1989,

  What are the levels of ink in each cartridge?  I connected a troubleshooting document that addresses the lack of alignment.  Click here  You could take a look and perform one of the steps that you did not.  Let me know how it goes.

  Good luck!

• Oracle Forms Win 7 64 - bit error INST-07407: unable to detect the platform of the machine or pieces of JVM

  
  I'll try to install Oracle Forms 11.1.2.0 on Win 7 64 bit and get INST-07407: unable to detect the platform of the machine or the pieces of the JVM.

  I followed the steps described in Oracle Forms 11.1.2.0 on Win 7 64 - bit bit JVM error but still unable to solve my problem.

  Here are the details of the version of the installed JDK.

  C:\Program Files\Java\jdk1.6.0_45 > java-version

  Java version "1.6.0_45".

  Java (TM) SE Runtime Environment (build 1.6.0_45 - b06)

  Java for 64-bit Server VM (build 20.45 - b01, mixed mode)

  C:\Program Files\Java\jdk1.6.0_45 > % java_home Echo%
  C:\Program Files\Java\jdk1.6.0_45

  C:\Program Files\Java\jdk1.6.0_45 > echo %path%
  C:\Windows\System32; C:\Windows; C:\Windows\System32\Wbem; C:\Windows; C:\Program Fi
  les\Java\jdk1.6.0_45\bin

  Installer: -.

  1 jdk-6u45-windows - x 64

  2 wls1036_generic.jar for 64-bit platform

  3 ofm_frmrpts_win_11.1.2.0.0_64_disk1_1of1

  Please advise. Thank you.

  I don't know if help.

  I have installed Oracle Forms 11 g on Windows Vista Home Edition (64-bit), had been an experience horrible (much testing), although eventually I got.

  If I'm not mistaken, I used this guide:

  Oracle WebLogic & Forms 11g Release 2 installation guide

• Kodak esp5250 printer 3520 error code unable to detect the edges of paper

  error code Kodak esp5250 printer 3520 unable to detect the edge of the paper?

  Please see

  http://support.en.kodak.co.uk/app/answers/detail/a_id/25352/kw/3520/selected/true .

• Stupid MS is unable to detect the operating system of W2KPSP4 but sees IE6SP1 user agent

  It is ridiculous that Microsoft (coding of Web Pages webmaster) is unable to detect that a user entering the page has a (drop dead) of Windows 2000 Professional SP4 operating system (OS)...

  and then always recommend (MS) install IE 8... When as far as I know... an IE8 installation cannot complete successfully on the OS W2KPSP4?

  Hello

  The Microsoft Answers community focuses on the context of use. Please reach out to the business community of COMPUTING in the TechNet forum below:

  http://social.technet.Microsoft.com/forums/en-us/categories

• Linksys wireless-g usb network adapter unable to detect the router using windows XP desktop PC

  I've changed in broadband Orange yesterday and since then my adapter is unable to find the network (it was working fine with TalkTalk until I changed).

  He managed to find a couple of other networks that are nearby but nothing else.

  I have a laptop (windows 7) who finds the router Orange immediately. I tested the adapter with the laptop and it finds the router Orange plus about 10 other nearby networks.

  I rang Orange who crossed their tests and not found any problems. I uninstalled and reinstalled the adapter on the windows XP desktop, but I get the same result.

  Can anyone help?

  Thank you

  Thanks for the reply.

  I got it finally work last night after a day of cleaning up!

  Even if the network does not have to be detected in the available wireless networks "choose" I tried the "New Connection Wizard" and entered all the details that came with the router. The adapter found the Orange router but nothing else in the region.

  For now, it works but there is a problem somewhere, because I don't see any networks, I can see on my laptop.

  See you soon.

• "Unable to detect the Service" - bluetooth mouse connects is no longer

  Recently reformatted my c: drive, have a Sony Vaio running windows xp and it has upgraded to SP3.  Tested connection Sonyerisson Xperia Sony headphones via bluetooth and the two connect very well.  Have uninstalled and reinstalled Toshiba Bluetooth stack and nothing.  He sees the mouse but gives the error "failed to detect the service."  Also see "Bluetooth Local COM" in the Panel does not register the blue tooth services, more they are not in the registry.  I had been using the mouse before reformat, so not sure what happened.

  Hello KMXperia,

  Thank you for your message.  Please click HERE for some troubleshooting process.  After running these steps, please let us know how you feel.  We can't wait to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite L50 - A - unable to detect the remote device on BT

  Hello

  I have a C50-A-1E9 Satellite, I bought with Windows 8.1 and it downgraded to Windows 7 change HARD for one SSD drive.

  Everything works fine except Bluetooth.
  I have an Atheros AR956x wireless network card.

  Already reinstalled battery bluetooth several times, also with the installation of Package before Bluetooth filter driver (here I do not know if the installation worked, because I do not receive a "Installation complete" message, but no error message no more).

  The Bluetooth Manager, and everything seems fine.
  Just that I can't find other devices when I try to add new connections (tried several of them - speakers bose, galaxy S2) and devices do not see my computer.

  It seems that my computer think Bluetooth works, but in fact it doesn't.

  You have ideas, what's not here? Thank you in advance!

  I don't have experience with this machine, but by the use of BT is important the BT module is successfully activated. To do this, as far as I know, you use the FN key combination.
  Issues related to the:
  You can use the FN keys in general?
  When you press the FN key you find at the top of your screen flash cards?
  You can use FN + F12 key combination?

• 4 iPad unable to detect the C4599 already connected to the wireless network printer

  Hi all, I have a C4599 All in One Printer. I have just set up successfully with a WiFi connection to my router / modem network (infrastructure mode). There is no error message and I can print from a variety of laptops Windows (XP, Vista and 7). I loaded the HP eprint app on my Ipad 4 but it can not detect the printer. Note that the HP site says that this printer is compatible with the App ePrint.

  A second and possibly related is that I recorded with the HP eprint service website but I can't get the code or e-mail address for my printer. I can't find any way to turn it on the Web Services on the printer? (The HP site says this should be under Setup > wireless to the printer, but it is not.) There are only options to turn on/off the wireless, testing the wireless and print the wireless network and printer settings (which are all OK > PASS or information).

  Any ideas?

  Thank you

  With the update that has been done to the ePrint application, some of the old printers lost the ability to use this application to print from. The printer would not print directly from the iPad to the printer either. This is a feature called AirPrint. When you have the possibility to use AirPrint, he must place the unit on the same network as the printer, pull up a photo, press the action button on the iPad and then select print. The iPad will then give an option of the printer to print from if there is more than one printer capable of of AirPrint on the network.

  The printer cannot produce a code to register and save ePrint due to the age of the printer. Printers that have the ability of ePrint are a majority of those who have been in production in 2010 and later versions. A few Photosmarts who have the ability to use ePrint AirPrint are the 7520,6520 and the 5520. To learn more about these printers, see this link here.

• Unable to detect the rotation of the device of the method of sublayout of screen

  I'm developing an application compiled for OS 4.5. I need to find a way to detect the rotation of the unit and again fill the screen so that the fields are arranged according to the new dimensions.

  My idea was to save the display width and height in some private variables in my case screen and method of sublayout overloaded screen, check if the new values have been changed.

  What happens is that I get the old width and height again and again.

  I first read this post. In this document, @arkadyz points out how the order of the calls is a little weird and values returned by the view class are updated after sublayout is finished.  Therefore, there is no way to detect by the sublayout method.

  The proposed solution is to check the dimensions of the display within an invokeLater. Here's my test code:

  public class TestScreen extends MainScreen {
  
      public TestScreen(){
          super(Manager.NO_VERTICAL_SCROLL);
          populateScreem();
      }
  
      private void populatescreen(){
          deleteAll();
          //fields and containers added here. No need to add any to observe the issue.
      }
  
      public void sublayout(int width, int height){
          super.sublayout(width,height); //Tried calling this in the last line as well with identical result.     
  
          System.out.println(">>>>>>>>> Display.getWidth(before): " + Display.getWidth());
          System.out.println(">>>>>>>>> Display.getOrientation(before): " + Display.getOrientation());
          System.out.println(">>>>>>>>> Width argument value (before): " + width);
  
          UiApplication.getUiApplication().invokeLater(new Runnable(){
              public void run() {
  
                  System.out.println(">>>>>>>>> Display.getWidth(later): " + Display.getWidth());
                  System.out.println(">>>>>>>>> Display.getOrientation(later): " + Display.getOrientation());
              }
          }, 1000, false); //Playing with the time parameter does not change behavior.
      }
  }
  

  This gives exactly the same results. After that, I came to this post where @peter_strange

  provides a solution based on pushing a dummy screen, which detects the new width and height, and then passing the new values to the previous screen. I also tried, but it didn't work either.

  I also tried using the obsolete Graphics.getscreenWidth instead of Display.getWidth, and it did not work.

  Now, I am out of luck because I have almost tried everything and I can't provide a solution without resorting to the 4.7 or 6.0 API.

  Tested in BB 9550 Simulator v5.0.0.535 (Platform 2.13.0.108) and v5.0.0.306 real unit BB 9520 (Platform 4.2.0.113)

  Take a look at the following.  In my view, the following code can be used to detect changes in orientation.

  public class TestScreen extends MainScreen {
  
      int currentDisplayWidth = Display.getWidth();
      int currentDisplayOrientation = Display.getOrientation();
  
      public TestScreen(){
          super(Manager.NO_VERTICAL_SCROLL);
          populatescreen();
      }
  
      private void populatescreen(){
          deleteAll();
          //fields and containers added here. No need to add any to observe the issue.
      }
  
      public void sublayout(int width, int height){
          super.sublayout(width,height); //Tried calling this in the last line as well with identical result.     
  
          System.out.println(">>>>>>>>> Current sublayout width (before): " + currentDisplayWidth);
          System.out.println(">>>>>>>>> Display.getWidth(before): " + Display.getWidth());
          System.out.println(">>>>>>>>> Display.getOrientation(before): " + Display.getOrientation());
          System.out.println(">>>>>>>>> Width argument value (before): " + width);
          if ( Display.getWidth() != currentDisplayWidth ) {
              // process orientation change
              // ....
              // Now reset change detection variables.....
              currentDisplayWidth = Display.getWidth();
              currentDisplayOrientation = Display.getOrientation();
          }
      }
  }
  

• ESXi is unable to detect the discs.

  Hi, I am running esxi 6 and the difficulty to detect the discs. ESX just see them quite so that a live disc ubuntu can. I have an ssd and 2 hard drives connected via an adaptec 6405 contoller card of their own individual JBOD, this is a configuration that works on two of our other servers. I tried re-initialization of disk and rebuild partition table in gparted, but nothing seems to work. Any ideas?

  
  

  RAID controller http://www.VMware.com/resources/compatibility/detail.php?deviceCategory=IO & productid = 20867 & deviceCategory = io & details = 1 & partner = 475 & releases = 273 & keyword = 6405 & page = 1 & display_interval = 10 & sortColumn = Partner and sortOrder Asc

  
  

  Driver is installed

  
  

  Here is the map on HAL: VMware Compatibility Guide: search for i/o device

  Here are the 6 version https://my.vmware.com/web/vmware/details?downloadGroup=DT-ESXI60-PMC-AACRAID-62140709&productId=490 ex

  R

• DVD - rom are unable to detect the DVD/CD

  My DVD-rom for HP Compaq V3412TU cannot detect any solution DVD/CD...any? Need your help A.S.A.P.

  Spoiler (Highlight to read)

  Solved!

  Solved!

  Hi xemriust,

  You can try this:

  Acess Regedit using the tab run

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  
  Remove the upper and lower registry filters
  in the right pane, click UpperFilters, and then click on remove.
  Click Yes to confirm the deletion of the UpperFilters registry entry.
  In the right pane, click LowerFilters, and then click on remove.
  Click Yes to confirm the deletion of the LowerFilters registry entry.
  Exit the registry editor and restart the computer.

  Good luck

  CO

• Windows XP Pro unable to detect the USB mass device

  Original title: USB

  I have a Western Digital ("My Passport Essential" WD3200ME) portable mass memory. My PC is running XP Pro with all the latest news from the security of Ms. In the last year or two, I noticed that it becomes progressively difficult for XP to recognize my USB mass storage device - sometimes, he took a reboot and repeated the reconnection of the device before the device is recognized. MS updates, the more difficult this because to make a connection. When it fails to connect, I get this annoying Hardware Wizard, which constantly to appear, asking Windows to search for the correct driver. I also have an old Pro XP PC I have installed all the updates latest MS, but it has XP SP3 installed. The old PC has no difficulty to recognize and connect to the same USB mass storage device. So I have 2 PC Pro XP: does not work with the latest updates from MS that gives connection problems to my USB mass storage and the other XP Pro base. Even if I bought another USB mass storage, it would probably suffer the same problem. What do you think is the problem?

  One of the best USB debugging of sites I've come across is this:
     <>http://www.Uwe-Sieber.de/usbtrouble_e.html >
  Go about 1/2 to the bottom of the page and look for the section titled: "application for XP drivers.  Most likely, you just need to delete the file "infcache.1" and let it rebuild.

  HTH,
  JW

• Unable to detect the Casio g ' Commando Smartphone box on windows 7

  tried to sync my c771 and windows can't find a driver for it I looked around and MS wrote its compatible but my computer can't find it when its plugged to this

  Original title: Casio g ' zone Commando Smartphone

  Hello

  1. did you try to use another USB port?
  2. you receive an error message?
  3. have you made changes on the computer before this problem?
   
  Try these methods further and check if it helps:
   
  Method 1:
  Try running the fixit from the link give below and check if this can help:
  Hardware devices not detected or does not
  http://support.Microsoft.com/GP/hardware_device_problems
   
  Method 2:
  Remove and reinstall all USB controllers
  To remove and reinstall all USB controllers, follow these steps:
  
  (a) click Start, click run, type sysdm.cpl in the Open box, and then click OK.
  (b) click on the hardware tab.
  (c) click the Device Manager button.
  (d) expand Bus USB controllers.
  (e) right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  (f) restart the computer and reinstall the USB controllers.
  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.
  Download and install the latest drivers from the Chipset of your manufacturer's Web site because it also includes USB drivers.
   
  If the problem persists, contact Casio support and check.
  http://www.casiogzone.com/commando/
   
  It will be useful.

• Win 7 is unable to detect the 2nd monitor at startup

  New install of win7 with ATI Radeon HD4550-PCI Express graphics card.  Running a 100th Mitsubishi Diamond Plus monitor and a Sony Multiscan 500PS monitor, both off the 4550 card.  At the start, the main screen (Mitsubishi) is detected and the second monitor (Sony) is not.  I can open the control panel for the resolution of the screen and see both monitors correctly identified.   If I choose to extend these displays, Windows re-labels as generic PNP monitor Sony and the Sony monitor then active and works correctly.  As soon as I turned off the computer and restart, the Sony monitor is still not detected and I have to start the entire process.

  I deleted all of the ATI drivers and reinstalled the current Catalyst drivers (8.732, 26/05/2010), as well as the current motherboard drivers.  (The motherboard is Gigabyte MA790GP-DS4H).  Integrated on the motherboard graphics is currently disabled, although it made no difference to the problem.

  Help!

  
  

  Hello

  Check with Support ATI, their online documentation and drivers, and their forums.

  Drivers and Support ATI
  http://support.AMD.com/us/pages/AMDSupportHub.aspx

  ATI Catalyst drivers
  http://game.AMD.com/us-en/drivers_catalyst.aspx

  AMD/ATI Forums
  http://forums.AMD.com/game/

  Something may be wrong with the video card or drivers.

  -----------------------------------------

  These should help you put in place.

  How to set up dual monitors in Windows 7
  http://www.online-tech-tips.com/Windows-7/How-to-Setup-dual-monitors-in-Windows-7/

  Two screens are better than one
  http://www.Microsoft.com/athome/organization/twomonitors.aspx

  Work and play better with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  Move windows between multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/move-Windows-between-multiple-monitors

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.