DVD DVD TSST corp TS-H653 and TS-H353 does not not on Precision T7400

My T7400 running with Vista Business 64-bit has a TS-H353B of DVD-ROM and a DVD +-RW TS - H653B. Everything worked fine until I installed Pinaccle Studio 10.6 from the Vista installation disc. Apparently, this facility has done something for pilots. After restarting both drives is not accessible, the hardware manager says that pilots could not be loaded (Code 39). I reinstalled the drivers and rebooted, still the same error. I used the diagnosis (F12 at startup) and both drives are recognized and pass the tests. I downloaded H653B_D400.zip - TS and TS-H353B - D500.zip on the Dell support site. When I reinstall the drivers of these files (which are Vista 64 files) I get the message of materiel Manager of Windows that the installed drivers are optimal and the most recent status. However, the drivers are not loaded, and so readers do not work. If I uninstall the drivers in the Windows hardware Manager, Windows Vista x 64 recognizes them and attempts to load their drivers, but then I'm back to square 1, drivers can not be loaded.

Windows drivers trying to load are cdrom.sys and PxHlpa64.sys for the two discs. There all the other drivers that could (or should) be used? I ask this question because maybe the Pinnacle suite has changed the original Scriptures...

Does anyone know this kind of error and how to fix it? Thank you.


Tags: Dell Drives

Similar Questions

  • my driver for the ROM of DVD TSST TS-L623D is corrupted. Computer does not display the drive. How can I fix it?

    When I'm looking in the Properties tab for the device in Device Manager I get - Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

    BUT when checking for an update as I get - the best driver for your device is already installed. Windows has determined the driver software for your device is up to date.

    I tried to uninstall and reboot, but it does not help.

    I am running Vista Business.

    Try to run Fixit:

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.Microsoft.com/kb/982116

  • CDDVD TSST CORP TS-L633M ATA DEVICE DRIVER DOES NOT

    OK so I went on the website of windows (http://support.microsoft.com/gp/cd_dvd_drive_problems) and downloaded and ran the program that makes it surprisingly found the problem and tried to fix it but in doing so, I got a message from PILOT of FACILITIES of SOFTWARE developed in the taskbar that says that it not to repair the failing TSST CORP CDDVD TS - L633M ATA DEVICE driver. So now that it is said "Please consult the manufacturer of your device for help to get this installed device." who should I contact?

    -J' have a HP PAVILION DV6 121 6SA

    Hi Woody94,

    TSST CORP stands for Toshiba Samsung Storage Technology Corporation. This pagehttp://www.tsst.co.kr/korea/en/techinfo/svccenter.php gives a map of service centers around the world. You will probably find an email from support by placing the center of service to you.

    If not, have you contacted HP support to see if they can help? http://WWW8.HP.com/UK/en/contact-HP/contact.html This link is to HP support to the United Kingdom. If you are in another country, just visithttp://www.hp.com and check the support pages or contact pages. You can also consult the user's guide for your PC to see if support details are included here.

    This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

    John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web:http://www.winuser.co.uk;  Web: http://xphelpandsupport.mvps.org;  Web: http://vistasupport.mvps.org;  Web: http://www.silversurfer-guide.com

  • USB ports, CD/DVD player, and Mike just does not work

    So I'm pretty sure that these things are happening at the same time, although there are risks my trying to troubleshoot the USB ports have contributed to the failure of the microphone (internal and will not capture sound) and cd/dvd drive (not open). Perhaps? It is true that I know little about these kinds of things, but I'm much less following the indications which is what I did to try to tackle the problem of USB port, which was the first I noticed. I followed all the advice I could find online for troubleshooting when all usb ports do not respond. I used Device Manager to disable in its regular and safe mode. I also uninstalled them all in both modes (even if they reinstall until I'm able to restart). I unplugged and wait 5, 10, 15 min etc. There was a difficulty mentioned about watching the. Mine and INF files do not contain the mentioned error. I'm tempted to all my files backup and restore the computer to factory settings, especially now that the CD/DVD player and the micro does not work. This would solve the problem? If these things are related? Could even restore settings because I can't have in the cd/dvd drive? It's a dell inspiron 1721, and it crushed while you restart for almost a whole day just all the time I've began to notice all these malfunctions. I really appreciate any guidance!

    Good so I solved all of these problems. I don't know what did the trick, but when I went back in the BIOS to re - activate the ports they have worked!

  • T410 doesn't start, white screen and the keyboard does not power on.

    Hi, my laptop Lenovo T410 does not start. I hit the power button and looks like it is about to start. The thinklight flashes on as normal, the cd drive is checked, the caps lock on, then nothing/button blinks. No display and the keyboard does not respond. Power led lights up; If I leave it awhile the fan turns on. Can I stop the machine using the power button, but the problem remains the next time I turn it on.

    I tried to remove power and battery, power 10 button time then with the power to 30 seconds, before replacing the power supply and the battery but nothing happens. I tried to use a different keyboard. I tried to plug in an external monitor. No change.

    This problem appeared after I left it on overnight. I have the feeling that it entered into hybernation mode, perhaps, and that it disturbed some important functions which he could not complete. Not sure if. Any help gratefully received.

    Thank you very much

    Pete

    It's the original configuration of your laptop:

    ThinkPad T410 2522BF1
    i5 - 520 M (2.4 GHz), 4 GB RAM, 160 GB 7200 RPM HD, 14.1 in. LCD 1280 x 800, Intel 5700MHD, DVD, Intel 802.11agn Wireless Modem, 1 Gb Ethernet, UltraNav smart, secure, camera, 6 c Li-ion, Win7 Pro 32

    I firstly the LCD cable or secondary LED could be damaged, but if you don't see anything on an external monitor I tend to think it's a motherboard problem.

    Last thing you could try putting running a Live Distro Linux from a CD/DVD or USB drive, using Ubuntu or Linux Mint, for example.

  • My computer will not open certain programs, and the system does not.

    I have really no idea what's wrong with my computer, so I'll just list the symptoms.

    The first and foremost problem is that my computer won't open some programs.  First thing I noticed when I tried to open iTunes and it did not open, no matter how many times I tried.  I went to restart my computer, and that opens up a host of new questions.

    My antivirus - Windows Live OneCare - software does not open.  I tried to turn on Windows Defender for malware, but it crashes when I try to do.  Not only does iTunes opens, but neither a few other programs I have on my computer--mainly those who could help me to solve this problem, such as the restoration of the system.  When I try to uninstall a program - all - nothing happens and he refuses to let me try to uninstall anything else, insisting something is already uninstall.  And my computer can't detect my printer.

    Which leads to my other problem: I have two computers connected to a network via an Ethernet cable.  The other computer is fine and can access the Internet fine, but when he sends something to the printer, nothing happens on the end of the printer.  It is a red 'X' the symbol of my network on my computer in the lower right corner (next to), so I guess this confirms my concerns about the network.  I don't understand what exactly is the problem, just that the other computer cannot print (it is not connected directly to the printer, mine is).

    Because Windows Live OneCare and Windows Defender does not work, I can not scan to see if it is the result of spyware or malware.  And because whenever I click on the system restore, nothing happens, I can't restore the computers to something else.  I'm completely stuck.  More critical functions simply do not work.

    If you have Vista then the Windows 7 upgrade that will take and install without problems, but the editions between operating systems need to be adapted, Home Premium, Home Premium edition, or higher, you cannot switch to a lower version.

    Upgrade Windows Vista to Windows 7
    http://Windows.Microsoft.com/en-AU/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7

    You never provided the installation diskettes, it's unusual for OEM nit of a recovery hard disk Partition.  Check any manual provided, or go to the manufacturer's Web site and see that your machine is delivered with.

    Failure one of the reasons for CD or DVD boot's Boot in the Bios options to have the hard drive initialization before any other media.  You may need to check the settings in the Bios and put them accordingly.

  • Just opened a new vista Windows upgrade disc and my computer does not recognize it? My computer always tells me to put a disc in when it is already.

    Just opened a new vista Windows upgrade disc and my computer does not recognize it?  My computer always tells me to put a disc in when it is already.  I can't my PID because I can not install the program.  I can't get help from microsoft because I do not have my PID.  Help please

    Your optical disc drive must be able to read the DVD to install Vista.

    See you soon. Mick Murphy - Microsoft partner

  • 13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. unplugged

    13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.

    This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

  • Just updated to IOS 10 and replace text does not work

    Just updated to IOS 10 and replace text does not work.  For example typing in omg should show oh my God. Has anyone else got this?

    I did the old thing: Disconnect to iCloud and sign back in. Unfortunately, he did not turn. The same thing happened on my iMac when upgrading to Mac OS Sierra - I lost all my text replacement. I also did Disconnect from iCloud and inback Panel . Unfortunately, it also didn't do the trick. Anyone know how to restore the replacement text. It is not has resided in the cloud?

  • Remote control does not work, and the load does not appear on Apple TV

    Hello

    I just returned from vacation and my remote seems has stopped working.   Naturally, my first assumption was that the charge was simply exhausted.

    Apparently that was the case.   He seems to have just died.

    I did pay for more than two hours and it still does not appear under devices Apple TV.

    My Apple TV 4 works very well because I use the remote control of my phone to navigate through it.

    If I understand correctly what I look at you, it seems that the remote control is same not synchronized or recognized by Apple TV more.

    Any suggestions on how to fix this?

    A reset is complete? Restart... no change.

    Thank you

    Bob

    1. Have you tried pressing the menu and the button for a few seconds while it now an inch or two away from the Apple TV, if successful, you should see a message on the screen saying the remote was paired.
    2. If you have an older remote from a previous model MacBook or Apple TV, you can use to restore the Apple TV, which, in many cases, has been sufficient to reactivate the remote Siri. You must complete all upward to undertake a restoration.
    3. If you have a USB cable - C you can try to restore by connecting it to iTunes on a computer.
    4. If you have tried all of these steps, don't have a distance sooner or a USB - C cable or their use is too inconvenient, return it to the store where purchased for a replacement, or to couple for you.
  • I can't log in to my account to Mozilla, and Password Reset does not work.

    I have an account to create themes and Mozilla Add-ons, but now it seems inactive,
    and password reset does not work. Here is one of my themes:
    https://addons.Mozilla.org/en-us/Firefox/addon/Fox-December/
    my email: [email protected]

    Support for the site Add - ons are here:
    https://discourse.Mozilla-community.org/c/Add-ons

  • My Inbox to view the sender for each message and now it does not work... How do I get it back to where it was?

    My Inbox to view the sender for each message and now it does not work... How do I get it back to where it was?

    Right-click on the header at the top of the list of messages and select from the list of options.

  • Fields on several Internet sites have been changed in another language. The browser is set to English, and this problem does not occur with Chrome.

    Fields on several Internet sites have been changed in another language. The browser is set to English, and this problem does not occur with Chrome. Specifically, a large part of Tumblr and Facebook menu has been changed in another language (Russian, I think). I tried reinstall Firefox, clear the cache and reset firefox to its default state. None of them helped. Any suggestions on how to fix this?

    Hey again,

    Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.

    You can try these free programs to search for malicious software that work with your existing anti-virus software:

    Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.

    More information can be found in the article troubleshooting Firefox problems caused by malware .

    I hope this helps!

    Curtis

  • The plus sign next to my tab stopped working: when I click on it nothing happens. I tried uninstalling and reinstalling and it still does not work.

    The sign + to add a new tab has suddenly stopped to work earlier. I tried uninstalling and reinstalling and it still does not work. What can happen and how to fix it?

    Hello

    The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
    Note: This will make you lose all the Extensions, open Web sites and preferences.

    To reset Firefox, perform the following steps:

    1. Go to Firefox > help > troubleshooting information.
    2. Click on the button 'Reset Firefox'.
    3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
    4. Firefox opens with all the default settings applied.

    Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

    This solve your problems? Please report to us!

    Thank you.

  • As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

    As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

    This may be caused by the Tab Mix Plus extension

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

    • Do not click on the reset button on the start safe mode window or make changes.

    You can try to install the latest Dev version of Tab Mix more if you use this extension.

    See the sticky on the forum of Tab Mix Plus:

Maybe you are looking for

  • Put in error place a Time Capsule

    Hello, I recently bought a recon Time Capsule and when I go to the airport, it happens to "consider the base station" and then I get "error has occurred." Can anyone help? I am running Yosemite 10.10.5 MacBook pro (15 retina in mid-2014) 2.2 Intel co

  • Remove the dialogue during the closing of DIAdem

    How do I remove or close the dialog box that appears when the tiara was closed if data or page layouts have been changed via SCRIPT? I tried: CmdNoDialogDisp = TRUE CmdNoWarningDisp = TRUE CmdNoMsgDisp = TRUE CmdNoErrorDisp = TRUE CmdNoInfoDisp = TRU

  • How can I contact hotmail to let them know that I was hacked. Need phone number or e-mail address

    E-mail address is removed from the privacy *. How to find a phone number or e-mail address to inform MSN my hotmail account has been hacked.  I think it must be a secret.  I know it's been hacked because my contacts have sent emails asking for money

  • BlackBerry smartphones my 9900 is broken!

    Hello I have a bb 9900 and all of a sudden, it makes that restart. It stops, restarts, and turns back on itself and then after a few minutes, he does the same thing. I tried to look for a software update, but it is not yet available. Someone help me

  • Got Firefox 50, saw Stealthy replaced AdBlock Ultimate in bar. Why is disabled AdBlock?

    Hi, I'm using Mac OS 10.95. Went to get Adblock Ultimate on your site several days ago and it worked fine. Today, after updating to Firefox. 50 I see what we call Stealthy has replaced the ultimate Adblock on the small icons at the top left. When I c