DvD - external rom for Portege 3500

I recently acquired a Portege 3500 as well as an external DVD-ROM from Toshiba (model No. PA3246U-1DVD). As I try to find the drivers for this I failed horribly (for the dvd - rom). It is connected via a CardBus card. Toshiba says that drivers should be part of Windows but my system is unable to find them. I was wondering if anyone here had drivers for the Portege 3500 for it. If I'm not mistaken, they should be for PCMCIA adapters. Any help on this would be greatly appreciated.

* Note: retailers say the ships of external Toshiba DVD-ROM with cd contain the manuals and drivers. If anyone has a copy or could direct me to a site with them it would be greatly appreciated as well.

above all external DVD players are manufactured by freecom

You can find the driver cardbus, freecom for your 3500 here:
http://support.toshiba-tro.de/tools/Portege/P3500/win-XP-TBE/CardBus-drv/CB-drv-P3500-XP-TBE-5135661-en.zip

If you need additional drivers, you can find and download on the website of freecom (www.freecom.com)

Tags: Toshiba

Similar Questions

  • CD-ROM for Portege 3500 recovery does not work!

    I have a Portege 3500 tablet pc and the recovery cd does not work.
    I followed the instructions but nothing happened to my windows again!
    Can you tell me please how can I get my phone?
    Thank you

    Hello

    AFAIK the Portege 3500 dose does not support internal CD/DVD players.
    Have you used an external hard drive that is compatible and supported for boot from the CD?

  • Bootable USB-CD/DVD drive need for Portege M200

    I couldn't find any list with bootable USB-CD-& DVD-ROM-drive for Portege M200.
    No boot on USB drive. Some change to the boot of other USB devices?

    Sorry for my English

    Hello

    Please check this thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=45144

    Horwath user posted a link to the Toshiba document that gives all the information on the CD/DVD bootable USB drives.

    In addition, you can buy a compatible USB WEIRD of the ASP from Toshiba

  • Need of German recovery CD for Portege 3500

    Hello I'm looking for the Portege 3500 tablet pc recovery CD... Because mine are missing and the helpdesk told me that they do not have these CDs more :-(

    I want the German version of area. Money should not be the problem...

    I also have a legal Windows XP Tablet serial number, because I m a universitity student @msdnaa...
    My only problem is that I don't have the recovery CD...
    My system is already running, due to the installation of windows via pxe, but partitioning is not this beautiful :-) due to the installation of BACK...

    I m really looking forward to your response!

    Hello

    I kindly may I ask which service center contacted you´ve? You called a sort of hotline Toshiba or you request authorized service partner in your country?

    You can try this service partner which is in Bavaria and served with some very good service:
    http://www.IME.de/

    If they allow couldn t you can go in the global ASP Locator on the toshiba site and look for another. Usually the ASP should be able to serve with some recovery in General...

    Welcome them

  • Need for external monitor for Portege R500

    The screen on the R500 (PPR50E-01301TEN) is fine for a use for an hour or two on the go, but if I use it constantly throughout the day, I get a bad neck and headache (perhaps the angle that you have to look as far as its small size). So I want to get the external monitors for her at work and at home. Home preference would be an LCD TV.

    The problem is Windows tells me that the screen resolutions supported for the external monitor is 1280 x 768, 1920 x 1080 and 1920 x 1200. Linux wants to offer me 1280 x 800 or below, although I might be able to fix this with a little tweaking. Assuming that Windows is right, does anyone know of a 18-21 "wide screen monitor or a TV with one of the resolutions supported as its native resolution, or even a resolution supported? I can't find something.

    It should probably be 1920x1xxx, 1280 x 768 will be quite grainy close up on a 18 "+ monitor." Why aren't all common intermediate resolutions on the monitors (1440 x 900 or 1680 x 1050) supported? If he can do 1920x1xxx, he should be able to make them.

    As much as I know duplicator can not improve things. This external device just flow through the signal from the computer laptop itself.

    What resolution do you need for your monitor?

  • How can I get a DVD ROM for Portege My drive

    I bought an external DVD Rom type Toshiba PA3246E and Realplayer says that I need the native driver for topay DVD movies. Anyone know where/what should I download.

    V

    Hello

    I hope that your player works properly with all the media you are using. This native driver is obviously not Toshiba stuff and Google all over the place and pick up some information about this.

    Sorry, but I didn t understand what DVD movies you want to watch.

    Good bye

  • Can I connect an external keyboard for Portege A100?

    Portege A100 laptop can be used with an external USB keyboard? If so, is it important that the brand that I use? I finally convinced my wife to learn typing, but the keyboard of the laptop is not the easiest keyboards to learn.

    Hello

    Of course, it is possible. It s no matter what brand you use, but the connection is important.
    It must be an external USB keyboard because the A100 protégé supports only this interface for the connection of the keyboard

  • Where to buy CD/DVD compatible disks for Portege M200

    I found a list of a few weeks there are some startup discs compatible for the portege M200 (that I bought 4-5 years ago), I did a rough search for readers on google and in the world says "out of stock".

    I lost the list another list would be useful, but is it still possible to buy these discs from somewhere?

    I would like to install another OS on laptop there.

    Hello

    You can buy all the parts for the Toshiba ASP compatible laptop in your country.
    Here you will find the link to ASP:
    http://EU.computers.Toshiba-Europe.com-> support download &-> find an authorized service provider

    See you soon

  • Cannot install some utilities for Portege 3500

    I downloaded several utilities, but some of them I can't install it, click "setup.exe" and... nothing happened?
    What reason could be?

    Some utlities have more files than other zip files

    What utility do you mean exactly and what OS do you have?

  • Can what external CD/DVD-Rom I use on Portege 3500

    Does anyone know what are the criteria for an external CD ROm for a Portege 3550? There are 3 units recommended in the forum that could restart the Toshiba Reinstall the Portege 3500 drives, 2 Targus and Toshiba 1.

    This seems very limited. In particular the 2793008 of Toshiba will do the job? No USB unit is recommended and it seems it takes a 16-bit interface - not a 32-bit.

    Can someone clarify please?

    Hello

    I don t think that it will be able to boot from USB key because the BIOS doesn t it supports.
    If you want to retrieve from the CardBus PCMCIA adapter you will need a special disc boot that allows the start of the PC 16-bit PCMCIA card.

    I found these drivers:
    Light Slimline CD-ROM 24 x, PX1052E-1NMD (16-bit PCCard)
    Slimline CD - RW 8 x / 8 x / 24 x CDRW, PX1054E-1NST (CardBus)
    Slimline DVD - ROM 8 x / 24 x, PX1053E-1NMD (CardBus)
    Slimline Combo, PX1055E-1NST (CardBus)

  • Re: Question about the CD/DVD player for Portege M400

    I have a Portege M100 - and the CD-ROM drive does not work.

    Whenever I put a disc in I can just hear the motor turn the disc, but the computer is not picking up the drive. Device Manager picks up flawless.

    It doesn't seem to be any firmware for this sorting (or am I wrong).

    I've seen a DVD player for a M400 on ebay and I was wondering if that would take on my M100.

    Before buying it, I was wondering if anyone knew if it would be compatible. It seems to be OK size wise, but I was wondering if my Portege M100 XP would be able to use it.

    The description for the drive I want to put in the M100 is below:

    Thank you very much for your time. :)

    Description

    DVD +/-RW drive for laptop Toshiba Ultra Slim Bay Portege M400, S100 & Tecra S3

    Compatible models:
    Portege M400, Portege M405, Portege S100-S113, Portege S100-S1132, Portege S100-S213, Portege S105-S1133, Tecra S3,

    The Toshiba Ultra Slim SelectBay DVD SuperMulti Drive is a DVD burner that combines all the functions of a DVD player, DVD recorder, CD burner, and CD player in an ultra slim and ultra light. It gives instant access to CDs and DVDs and fits perfectly into your slot to drive Ultra Slim SelectBay of your Toshiba Portege M400, computer laptop M405, S100 or Tecra S3. It is the ultimate portable storage for mobile users.

    Drive ultra slim and ultra light, fits perfectly in your Ultra Slim SelectBay of your PC drive slot, no additional unit to take on the road
    Dresser based on multiple drive in a compact design: DVD-RAM, DVD + RW, DVD + R, DVD - RW, DVD-R, DVD-ROM, CD, CD/R and CD
    Productivity:
    Backup of important files
    Easy access to CD and DVD based media
    Use for multimedia presentations
    Adapts to your lifestyle:
    Watch your favorite DVD movies
    Play music and games
    Create your own DVDs or music playlist
    Create CDs or DVs with ease
    Transfer data seamlessly between two discs, improve your productivity
    Reduce the time spent to transport and save files
    Slide-in simple, plug-and-play operation
    Includes drag ' n Drop CD + DVD3/B CLiP, Win DVD Creater 2 and the DVD-RAM driver
    Compatible with computer laptop Toshiba Portege M400, M405, S100 and Tecra S3

    Specifications

    Speed (Max):
    Read: 24 x CD-ROM, DVD-ROM 8 x
    Write: CD - R 24 x, CD - RW 4 x, 10 x HS CD - RW, 10 x US CD - RW, 2 x DVD-R, 2 x DVD - RW, DVD + R 2.4 x 2.4 x DVD + RW, DVD-RAM 2 x
    Compatibility: CD-ROM (read), CD-R(read/write), DVD - ROM (read), CD-RW(read/re-write), DVD-R(read/write), DVD-RAM(read/re-write), DVD-RW(read/re-write), DVD + R(read/write), DVD + RW(read/re-write)
    Dimensions and weight: 5 "x 5.5" x 0.4 ". 3.9 oz

    Hello

    According to the paper manuals s user for Portege M100 two drivers of optical discs are compatible with your Portege M100L:
    TOSHIBA SD-C2612
    TEAC DW-224TH

    So if you want to have good player get one of them.

  • Connected to the Portege 3500 USB DVD burner is not recognized correctly

    I am trying to connect a burner DVD HP DVDv 940th my 3500.When Portege I plug in the device, it is not recognized and the Device Manager list as a storage of unknown mass without a driver. Where can I get this driver?

    Hello

    Try to check the assumption of the manufacturer or the download page. Manufacturers of portable gift use support external devices t produced by other companies.

  • Need drivers for Toshiba Portege 3500

    Hi I m new to the forum.

    I have the problem. I can't find t on Toshiba support drivers and utilities for this model, where can I find all this kind of software (console, saving etc..)?

    Hello!

    First of all, welcome in the forum!

    Have you searched the Web from Toshiba site? You will find all the drivers who need you for this model.
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers
    * Archive *-Portege-online Portege 3xxx-online Portege 3500 online

    Good bye

  • Portege 3500: I need the cover plastic for hard drives

    I have a toshiba portege 3500 and I use it allot and recently I noticed a spot on the hard drive plastic cover-F6 numbered where I can get a replacement for it and how much it cost me through any replys

    Expensive chain, you are the best! :)

    It's really amazing to see how many things are available on eBay.

  • CD/DVD-ROM for reading CD / DVD RAM only...

    I reinstalled Windows XP due to problems with my system works only with Win7.  I did a clean install.  Windows XP installed a generic driver from microsoft CD/DVD RAM.  For this reason, I am not able to access the DVD ROM discs, no discs as CD ROM and DVD RAM disks.  I know that there is a way to change things so the system sees that I have a DVD ROM and not only a DVD RAM.  It's just think WinXP that my readers are only DVD RAM drives work very well.  They work perfectly with CD and CDR/RW and will work with a store bought DVD.  I just can't figure how to change the generic Microsoft for DVD RAM DVD ROM driver  I had this problem before, I don't remember the fix. I deleted the registry entries, I deleted the readers, only for have reinstalled them with the original drivers.  I have 2 drives, both are LiteOn.  LiteOn has no drivers for the drive and says they are "plug and play".  Any help would be greatly appreciated.  Thank you.

    I tried this also.  He said: there is nothing wrong with my CDROM or it says that my CDROM is not able to write DVD and install one that can.  Thank you.

    To access device manager > right click on the CD/DVD rom device and choose uninstall. Restart the computer and allow windows to detect the new hardware.

Maybe you are looking for