DVD player doesn't work after installing SP3 for Windows XP.

Similar Questions

• My CD/DVD drive no longer works after installing an update for Roxio Burn, (it was working perfectly until after the update).

  Hi, my CD/DVD drive has stopped working after I installed an update for Roxio Burn. I tried uninstalling and reinstalling, updating all windows and my device driver programs, but I just comes up with one, "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ', warning. The DVD/CD player that I use is called TSST corp DVD +-RW TS - H653G

  Hello

  Code 39 means that the driver is corrupted or missing.

  Having too many CD/DVD programs can cause strange problems, especially if they're loading of parts of them.
  Selves at the start because they will be competing for resources. This does not mean that this problem was caused by
  These however is a possibility depending on which and how many you have installed.

  Definitel check with the help of Roxio and their forums - you may need to uninstall Roxio to see if this
  allows the reader to work (not re - install until the issue is resolved).

  -------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Error 0x8007054F code: could not install SP3 for Windows XP

  original title: error 0x8007054F code: could not install SP3 for Windows XP because of the Filec:\windows\system32\drivers\acpi.sys being open or being used by another application. "Internal error."

  I tried to install Windows Service Pack 3 for Internet Explorer8. When you try to install this "priority" update, it begins the installation process, and then returns could not install Windows Service Pack 3 due c:\windows\system32\drivers\acpi.sys file is open or in use by another application. Internal error 0x8007054F. The only thing I have running in this case is the Internet (where I go to get the update) and the windows installation progress. What should I do to get past this problem? Please help me...

  Your loyal customer

  Hello

  
  To work on the issue, refer these methods
  
  Method 1:
  
  Read the following article.
   
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798
  
  Method 2:
  
  Error messages when you try to install Windows XP Service Pack 3: "Service Pack 3 installation did not complete" and "an internal error has occurred."
  http://support.Microsoft.com/kb/949384
  
  Registry warning:
  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/ )
   
  See also,
  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717
   
  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718
   
  Hope the information is useful.

• PC will not boot after loading sp3 for Windows xp__

  I loaded sp3 for windows xp and now the system does not restart.  He is caught in a loop.  It is now trying continuously restart.  I tried safe mode and it just scrolls the file names and stops.  I tried the last successful reboot option known and that no longer works.

  A. you must have only one 1 antivirus installed and to load at startup. If your McAfee subscription is updated, uninstall AVG & reboot.

  B. then you will need to treat the Norton "remains". Applications, (Norton and McAfee) are known to not uninstall (or upgraded) themselves.

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. double-click on the file that you saved in #1 above to run the utility. DO TAP not your keyboard until the race ends, then restart.

  C. now try to install SP3 by the following recommendations:

  WinXP SP3 - read all the prerequisites for a successful installation
      http://msmvps.com/blogs/harrywaldron/archive/2008/05/08/Windows-XP-SP3-read-all-prerequisites-for-a-successful-installation.aspx

  NOTE: If AVG has detected an infection that do not have McAfee, the computer might still be infected!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• DVD player does not work after update

  After you install SP3, my CD/DVD drive does not work with DVD but CD is fine.

  Hi Kebir,

  Run the patch from the link below: your CD or DVD cannot read or write media:http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us

  In addition, you can follow the steps in the link below: how to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD: http://support.microsoft.com/kb/321641

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My CD/DVD burner does not work after installing Windows 7.

  Hello.

  I recently installed Windows 7 on my laptop (about 2 weeks ago), initially delivered with Windows Vista.

  The facility is perfectly, and I enjoyed the simplicity of the new operating system.

  Everything was going well for about 2 weeks.

  I was able to burn CDs and DVDs.

  But today, when my father asked me to burn a CD for him, Windows Media Player 12 says that I had to connect a burner and restart Windows Media Player 12.

  I restarted the program, which did not work.

  I restarted my computer, that didn't work.

  I uninstalled my CD/DVD burner drivers and reinstalled them back on and I thought that WMP12 had started working.

  But when I put the blank disc inside my laptop and started the burn, my computer gave me a message there was an error in burning the disc, and I had to close WMP12.

  When I got the farm, WMP12 and then tells me to connect a burner and restart the program.

  After that, I looked for the drivers online set to level, or to the bottom of the slope to.

  But none of them worked.

  After that, I talked with a HP technician who told me that it is better to stick to the pre-installed operating system that comes with a computer and not downgrade or upgrade manually.

  She also said that because my computer was made for Windows Vista, it was the compatible operating system for my internal hardware.

  It gives me no drivers or anything to install.

  I should have come to Microsoft first, because now I realize that HP has nothing to do with Windows 7.

  If Microsoft, I ask you:

  When you install Windows 7 on an original Windows Vista laptop and that your CD/DVD writer works for about a week, then it stops working...

  What should I do next to fix this? :(

  Please help ~!

  -Kyo

  Hey Kyo - San,

  Given that the troubleshooter could not see the CD DVD drive, you can try to navigate to the following location in the registry editor and deleted the upper filter and lower filter keys and check if it helps you get the job of CD DVD player.

  1. click on Startand then click all programs.

  2. in the start menu search box type regeditand press ENTER. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  3. in the navigation pane, locate and then click the following registry subkey: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  4. in the right pane, look for UpperFilters and UpperFilter key and select it.
  Note You can also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters . If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry.

  5. on the Edit menu, click delete.

  6. When you are prompted to confirm the deletion, click Yes.

  7. exit the registry editor.

  8 restart the computer.

  Note: Sometimes, this problem is due to two Windows that have been corrupted registry entries. To resolve this problem, you must use the registry editor to delete the corrupted registry entries.

  However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow these steps in the KB Article: http://support.microsoft.com/kb/322756/

  Access the link below to learn more about the CD-ROM drive or the DVD drive that does not work as expected on a computer.

  http://support.Microsoft.com/kb/929461

  Note: the article above is for Windows Vista and the same applies to Windows 7.

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Pavilion: Bluetooth doesn´t work after installing Windows 10

  Hello

  Doesn´t Bluetooth work after I upgraded my OS to Windows 10.

  Can someone help me please?

  JimWieder

  JimWieder

  Thanks for the reply and the information updated. Check the link to your model and you will keep. Thre is no specific driver for Windows 10 for this computer for now, but there is a Bluetooth for Windows 8.1 driver.

  I could start with the HP Support Assistant, as I mentioned and see if she can find something for you. It is useful to have, as it will seek new pilots as part of its function.  If this does not work for you, then you can try to install the driver Windows 8.1 of the support page.  Broadcom Bluetooth driver

  Try to install such what, first and then Bluetooth test. If after the test, you still have trouble with the Bluetooth does not, try the method of this other link I posted on how to install a driver using compatibility mode, and then see if it will work for you.

  Here are other pages that can be useful for you in troubleshooting and testing, and also that of Microsoft.

  HP computers - using devices (Windows, 10, 8)

  HP computers - understanding and troubleshooting Bluetooth wireless technology (8.1 Windows, 8, 7, Vista, XP)

  Connect to Bluetooth devices - windows.microsoft.com

  I hope this helps.

• Webcam and DVD player get not recognized after installing an update

  Original title: Why webcam stoped working after vista update? __
  Cam web and CD/DVD of my hp 9623 cl stoped working after the update to Vista. The two are unavailable in Device Manager too.

  need help to restore it. Thank you

  Hello

  1. may I know what update has been installed?
  2. did you restart your computer after installing the update?

  Run Fixit diagnostic tool from the link below.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/GP/hardware_device_problems

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Update or automatic updates no longer work after installing SP3?

  Recently I photographed two XP machines. A a Latitude D600 and also an Optiplex 745 with Windows XP SP2. I can deploy SP3 in our process of the image. First run I did. Once installed SP3 updates no longer work. I found this article KB http://support.microsoft.com/kb/943144 and tried the suggestions here and FixIt MS, no luck. Then I thought why not try again maybe all the trial and error messed up something. I reimage but this time choose to do not to install SP3 immediately. Once done I run Windows Update and it works, until it installs SP3 then is no longer functions. I tried the above steps once again, no luck. I then leave the PC for 48 hours to see if the automatic updates the shot but they do not have. By other suggestions online I wrote a small batch file that updates several components of Windows Update (dll) which made no difference, and yes I'm in the last WindowsUpdateAgent. Please any help on this would be welcome. We move away XP but we have still a few dozen or more systems deployment running XP and this question slows down my work courses as I spend time troubleshooting instead of being able to finish and move along.

  Hello

  I suggest you to download and install Windows XP service pack 3 manually and check to see if the same problem happens:
  http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

  It will be useful.

• DVD player does not work after upgrade to Windows 8.1.

  Original title: you stole my DVD player?

  MS,

  I bought a HP with Windows 8.0 a couple of years.  At this time, Windows Media Player played drive E: movies very well.  Apparently, the 'free' Windows 8.1 'upgrade' deleted the DVD player.  None of the DVD players free on the App store will play a movie from the drive.  Worse, some of them want a 5 stars before you try to play a disc, then don't play not the DVD at all AND want money for features like an equalizer, this or cela.  Misleading and contemptible, on their role and yours, but I'm sure, not illegal.  I buy a Chevvy, 6 months later in the middle of the night the dealer removes my air conditioner and then offers to sell me an air conditioner.

  Please give back me the DVD drive you removed.  (I don't hold my breath however).

  Sincere greetings.

  Hello Leo Tolstoy,

  Thanks for posting your query on Microsoft Community forum.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. What do you mean when you say "Windows 8.1 'upgrade' removed the DVD player?
  2. Are you talking about physical DVD drive or player applications? If you are talking about a reading application then please give us the name of the player application?
  3. All device drivers are updated?

  Just for clarification, we need the screen capture of the page where the problem would be highly appreciated.

  You can check the link below to add the screen shot in your message.

  How to include a screenshot in your message

  http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-windows_programs/how-to-include-a-screenshot-in-your-post/2594b08e-32a3-476A-85A6-b021181be7e4

  Get back to us with all the information and the screen so that we can determine the root cause and provide you with the right measures.

  Kind regards.

• McAfee Internet Security doesn't work after may not update Windows

  After automatically installing a dozen Windows updates in these last days I noticed that I could access is more of McAfee Internet Security.  Whenever I clicked on its icon, it displays the error: -.

  "The 459 ordinal not found in the dynamic link library urlmon.dll.
  I tried to restore the laptop and McAfee has worked once more.  I then went through the painful process of re - install the updates of Windows one at a time to determine if any of them were the cause of the error.
  After having installed and restoring, I finally managed to get all, but it updates to install without the problem of training at McAfee, determining as the next security update will cause the problem experienced: -.
  * Update for Internet Explorer 8 for Windows 7 (KB2847204). *
  In this case, I do not use Internet Explorer 8 at all – I use Google Chrome, but I don't know if McAfee Internet Security uses IE8 somehow for its own purposes of display.
  For the moment, I've forced Windows updates not to install KB2847204, but if someone could let me know, a proper fix, that I would be grateful.
  Thank you.

  Very well. Your answer tells me that the specific IE9 version of the a Cumulative security update for Internet Explorer published on May 14, 2013 (e.g., KB2829530) was included when you installed IE9 manually.

  The version of IE8 specific KB2829530 have been installed. If so, using the system restore to solve your problem (uninstalled vs KB2847204) probably "screwed the dog."

  That being said...

  -Online manual installation of IE9 may have included the specific IE9, "defense in depth" version of KB2847204 - especially if it is not available when you run a manual check for updates now.

  -Online by definition, Cumulative Internet Explorer security updates [1] include the changes introduced by all the previous updates security (e.g. KB2829530 & KB2847204).

  -Online if the next security update is provided & installed via automatic updates (even if IE9 can be turned off) and no problem (with the application of McAfee or something else), all should be well.

  =>, It would seem that the IE team has abandoned its policy of about four years of the release of IE Cumulatives every two months so if expect to see the following out on Friday, June 14, 2013 (if not earlier).

  PS: even if he can prove that KB2847204 was a "buggy" update, I would never advise anyone to NOT install security updates.

  [Yes, this is all very confusing!]

  WARNING: Message AS IS without any warranty. MS MVPS represent or work for Microsoft

  ==================================================================
  [1] currently support version of Internet Explorer includes IE6 (running in WinXP SP3), IE7 (Vista SP2), IE8 (Win7 SP1) IE9 and IE10 (Win7 SP1 & Win8).

• System hangs after installing UPDATE for Windows XP (KB955759)

  Update for Windows XP (KB955759) installed on my system without problems. Once the system reboots and the Office rises, the system hangs.

  Are there any known issues or fixes for this?

  The system is XP Pro SP3

  Thank you!

  Run the 'unsubscribe' Fix It (left hand) on this page and you do not need KB955759: http://support.microsoft.com/kb/954157

• BSOD after installing SP1 for Windows 7 Home edition

  Hello

  I use my laptop with windows 7 Home Edition that is installed on my Seagate 1 TB hard drive.  Laptop has no internal hard drive. It was working fine until recently I downloaded the service Pack 1 update from the Microsoft site and began to install it. During installation, it asked to reboot your computer and started to reboot. At this point during the boot, I met BSOD. And I'm stuck their eversince. I am not been able to start windows. Pls help me solve this problem since I was my imp project is working to complet.complete.

  * Message moved by the moderator of the appropriate forum category. Windows / Windows 7/download, install, & activate/download and install for Windows/Windows 7 / Performance & System Doctor*

  This is not a configuration supported for Windows 7 running. Windows 7 must be installed on an internal storage device. This is probably why Windows 7 SP1 fails.

• Satellite A300-243: CD/DVD-ROM does not work after installing Win 7

  Good day to all!

  I have a huge problem with my CD/DVD room.
  I've updated my A300-243 Satellite with windows 7 and now I can't burn DVDs, CDs, the DVRW.

  But when I had Windows Vista everything was normal. What should I do?

  Post edited by: Qualy

  Hello

  I'm not sure if this will help but try this:
  Go to Device Manager and remove the drive from the list of devices CD/DVD.

  Then beginning of the registry (regedit.exe) and delete the Upperfilters and Lowerfilters completely from the following registry key values:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  After this reboot of the laptop.

• All Lenovo/IBM tools stoped working after installing only updates Windows 7

  All the tools of Lenovo/IBM as Power Manager, experience of the device access Conection collapsed after installation of Windows 7 updates.

  I reinstalled all applications of Lenovo/IBM, but that did not help.

  P.S. I have Lenovo ThinkPad T61 with Windows 7 Ultimate installed.

  Their gauges and removed the status bar status bar icons, but I always access trough hotkeys. So I restored the settings and the 'original' user interface