DVD Player error

Similar Questions

• V5.8 DVD player: error-70012

  Dear Apple community,

  I use a MacBook Pro 13 "(mi-2010) and replaced the Superdrive (SD) by a 750 GB HD (using the iFixit statement)." At the time I build on the 750 GB HD, it had Mac OS X 10.11.1. I noticed recently that the DVD player (v.5.8) not started correctly, display this error message:

  There was an error initializing

  A valid DVD drive is not found. [- [ 70012]

  Pressing the Ok button, quit the program.

  In this case independent of whether it is a DVD inserted in the SD card or not. The Superdrive is connected via USB as external drive and works well, for example with the VLC Player I installed before that I checked Apple's DVD player.

  Until I checked the DVD player, I also downloaded from the App Store "Screen recording Studio" App (Lite and more later for €4.99). This program does unfortunately not work, and I don't know if this installation has changed the settings of the DVD player or just the fact that the SD card is not connected as external drive.

  I contacted Apple Support and as a possible solution, that I've been recommended to update my Mac OS X 10.11.1 to update more recent 10.11.5 - which I did, but I still get the same error message when you start the DVD player.

  You have an idea for a solution? Are there preferences that can be adapted without having to reinstall the entire operating system new risk of loss of data etc. ?

  Thanks for your support!

  Best regards

  Özkan Yalkinoglu

  http://www.CNET.com/news/addressing-DVD-Player-error-70012-when-using-external-d banks in os x.

• Equium A200 - 1V0 DVD Player error impossible of video output to an external device

  Hello
  I use my Equium A200 1V0 laptop with Vista Home Premium, and whenever I try to watch a DVD using the preinstalled Toshiba DVD Player software, I get the following error...

  "Unable to video output to an external device. Please spend your
  display the buttons on the unit by pressing the Fn + F5 after the end of the application. »

  I do not have an external monitor, and have never had a. (By pressing the Fn + F5 buttons does not work, because...) I have not attached external devices!)
  The software used to work properly, and I have not changed the settings at all.

  I have now tried to reinstall with the latest download from Toshiba, but the problem remains.

  Any thoughts would be accepted with gratitude.

  Bufster

  Hello

  I found a boyfriend of the solution.
  How?

  I searched simply here in the forum and found this thread!
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=114726

  Jack Black has posted a link to a useful Toshiba doc that says that this error is related to the Realteck sound driver.

  Update the audio driver and you must solve this problem!

• 69889 DVD Player error

  2011 macbook air, el capitan.  External drive will not play a particular dvd.  I get a black screen, the beachball for a bit, then a message "Error 69889 DVD".  Other dvd play ok on the external drive.  If a newspaper as a guest user the problem dvd plays fine, then maybe there's a file corrupted in my files of the user?  Any help would be most appreciated.

  Go to ~/Application Library/DVD Player, and then delete the folder 'Settings' could solve the problem.

• HP TouchSmart laptop: DVD player, error 45 failure

  CD/DVD drive not unawares... may not open the drawer with a needle but the computer no longer seems to recognize that I have a CD/DVD player... did some checking online and after having checked that the driver was updated (it was), most popular tips seem to be remove the driver, reboot and it needs to be reinstalled , but it did not... There is now no inscription on the device for DVD/CD Manager.

  Received error 45 that the material was not connected?

  Any ideas to fix at some reasonable cost/effort?

  The Manual:

  Manual

  'How to' on page 57.

  Drive DVD +/-RW Double layer SuperMulti 747125-001

  http://www.eBay.com/ITM/HP-15-d-Series-SATA-CD-RW-DVD-RW-drive-GU90N-747125-001-/132000474849?hash=item1ebbd766e1:g:VBAAAOSwgZ1XsvI ~.

  $7.88 on eBay

  http://www.eBay.com/ITM/HP-15-D-series-DVD-RW-CD-RW-burner-drive-Su-208-747125-001-/152177523208?hash=item236e7cba08:g:iYEAAOSwARZXkqNT

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Satellite Pro U300 - DVD Player error

  Hello
  I had not used my DVD player for a long time, and when I tried to use it again the other day that he has stopped working. Where to insert the DVD and the DVD player provided Toshiba starts a message pops up saying
  "Impossible for the release of the video on an external device. "Please change your display keys of the device by pressing the Fn + F5 after the end of the application.

  I did what he said and further and have made sure the computer does not recognize somehow, another device connected to my laptop. All that shows is the LCD screen of the laptop and nothing more. No clue as to how can I fix? I don't have an external display at the moment as im at Uni. so I can't plug a hook to the top and see if it works like that and then properly close. Any other suggestions? Would be great,

  Thank you

  George J.

  Hello

  This problem is known to me. I got it with my Satellite P200. I was not able to solve this problem.

  I just deleted a Toshiba DVD drive and now I use VLC media player. Download the latest version. The player is just great.

• Satellite Pro A300D - cannot play movies on a Toshiba DVD player

  Hi guys,.

  When I play movies in Toshiba DVD player I get the following error message: "unable to output the video to an external device. Please check the external output setting after the end of the application. TEMPRO, I installed and tried to install all updates - some of them were for different hardware so wouldn't install.

  I get a similar problem in Windows Media Player "Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD player and the video card protection decoder. Try to install a driver available for your video card. VLC player works fine. The drive otherwise normally functioning.

  It's the same problem, as described in this thread: http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=201029&tstart=0, but all the answers are a similar problem with HD DVD on a different model (P200).

  Anyone know how I can fix this problem? I'm not sure I can be bothered to go back and reinstall Vista etc...

  Thank you
  Alex

  Hey Buddy,

  According to the Toshiba DVD Player error message: are you trying to watch DVDs on an external monitor or TV?
  In your case, I will try to reinstall the DVD playback software. This means delete the current version and then restart your computer. Then download and install the latest software from Toshiba DVD player.

  But to be honest: it's that everything works with VLC media player as it s very big and small media player that can play all audio and video files. Isn t it? ;)

• DVD player not working not not Satellite Pro A100 - Code 37 error

  Hello

  Someone help on this?

  I have an A-100 and the DVD player has stopped working in XP. I checked the Device Manager and see XP disc but returns this error "Windows cannot initialize the device of this hardware driver. (Code 37) »

  I also noticed that ASAPI.sys is not running in the Task Manager.

  I'm guessing this has something to do with the problem.

  I tried to reinstall the device drivers, but this made no difference. Any suggestions?

  Hello

  Error code 37 means the driver returned failure from its DriverEntry routine.
  You can try to delete the driver from Device Manager and rebooted the new OS should recognize the drive device and initialize the driver again.

  If this is not enough, try this procedure:
  Run REGEDIT and open the following folders:

  HKEY_LOCAL_MACHINE
  -> SYSTEM
  -> CurrentControlSet
  -> Control
  -> Class
  {4D36E965-E325-11CE-BFC1-08002BE10318}

  After you click {4D36E965-E325-11CE-BFC1-08002BE10318} you should see two settings on the right side:
  "Upperfilters".
  'Lowerfilters '.

  Click on each of them, press DELETE, and then click YES.

  Then restart the laptop and see if it was useful.

• Error in audio - output Satellite P200-1EE - Toshiba HD DVD player problem

  Hello

  I'm new here so I don't know if I'm in the right forum or not, if I'm not I apologize.

  I have a Satellite P200-1EE and tried to play DVDs on Toshiba HD DVD player but everytime I try it comes up with an error message saying "an error has occurred in the audio output settings. Please check audio driver is set up correctly. »

  I tried the update audio drivers but it tells me that I have already installed the drivers the best.

  Any help would be most appreciated.

  Thank you for your time.

  Hello

  What OS do you have?
  What is Vista?

  If yes then another question; have you installed SP1?

  Please also see the European driver of Toshiba page and choose your model of laptop.
  There is a DVD HD v4.32.00 patch reader.
  The other version 4.51.07 HD DVD player is a full version and if the patch won't work, then you must install the full version.

  See you soon

• Portege 3480CT - DVD player in those Port Replicator errors

  I have a Toshiba Portege 3480CT with an external media Port Replicator.
  The MPR has a DVD player, but I can't get the laptop to recognize DVD.
  He can see and read CDs, but I get the following error when I try to watch a DVD.
  "ASPI for Windows is not available...
  Only 32 bits supported CD rom drive... »
  The MPR recognizes that the drive is there.
  Laptop is running Windows XP SP2
  Have the BIOS update update and installed all the drivers Toshiba known.
  Can anyone help? Thank you.

  Hello

  In my opinion you need driver ASPI Google everywhere. Maybe you will find the solution for your problem. You can start with this one http://www.ncf.carleton.ca/~aa571/aspi.htm

• Error setting output Satellite A300-1jh - Toshiba HD DVD Player - audio

  I have a problem! When I try to play a dvd on the toshiba hd dvd player its gives me an error message saying "an error has occurred in the audio output settings. Please check audio driver is set up correctly. »

  I read a similar thread on this forum in which it is said that I should install the latest version of the Reader 4.51.07! I installed it, but the message keeps coming back! I have windows vista ultimate 32 with all updates! What do you think I should do? Thank you.

  PS: I have a satellite a 300 (psagle) 1jh

  Post edited by: petrutjim

  Hi mate

  I found this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=162772

  He's certainly the same question as in your case and the solution was a DVD player patches installation or installation of new full HD DVD player.

  Notes; the Vista should be also updated!

• DVD player in early 2009 Mac Pro C2 error pointer support?

  Could someone advise if the DVD player in an early 2009 Mac Pro (HL-DT-ST DVD - RW GH41N) supports C2 error pointers?

  This will help in establishing a ripping program I (XLD)

  Thank you very much.

  Hello

  Quite a novice here, but it appears C2 is perhaps not all that big!

  http://forums.Linn.co.UK/BB/showthread.php?TID=26143

  l-optical-reader-and-xld-thoughts-19494/ http://www.computeraudiophile.com/F8-General-Forum/C2-Error-Pointers-New-externa

  XLD reason will not work?

  https://GigaOM.com/2011/02/04/how-to-preserve-your-music-CD-collection-on-a-Mac/

• Error: The DVD player won't read or burn discs. TS-L633R CD-DVD player. Laptop HP DV6-3120US. Win 7.

  The product name and number:

  HP Pavilion dv6-3120us

  OPERATING SYSTEM

  Windows 7 Home Premium. 64 bit.

  Error message

  "Insert a disk; Insert a disk in drive E:. "

  Background

  Windows 7 system pre-installed on recognized computer CD/DVD ROM drive for about 3 months. Malware corrupted operating system. I reinstalled the OS disk from the recovery partition. CD/DVD ROM drive could not read or write, and I can not restore the old files or save the current configuration via the CD/DVD-ROM drive. All Windows 7 drivers, and hardware updates seem to be installed and up to date as of 04/10/2011.

  Troubleshooting steps

  1 attempted to play audio CDs. Same error message.

  2 tried to read data CD-ROM. same error message.

  3 tried to read DVD - ROM data. same error message.

  4 Write DVD ROM has failed. Same error message.

  5 re-loaded OS 2nd time. No change. Same error message.

  6. checked with HP Support Assistant. DVD drive is recognized but not the media. No change.

  7 checked Device Manager. DVD player is recognised as TS-L633R.

  8. driver is cdrom.sys version 6.1.7600.16385. Clicked on Update Driver, no change.

  9. I tried the uninstalling and reinstalling the driver. No change.

  10 enabled BIOS. Processor AMD Turion II P540 Dual Core 2.4 Ghz. BIOS seems to be up-to-date, version F.27.

  11 BIOS lists bootable CD/DVD-ROM drive. Reordered the first road and used Knoppix Linux boot boot disk, no change. Windows starts instead.

  12 review of registry for "filter" and "lower filter" entries.  Checked registry 4D36E965-E325-11CE-BFC1-08002BE10318. No upper or lower filters entries in current filter. No change.

  13 Ran 'hardware and troubleshooting of devices. " It cannot detect the cd/dvd. No change.

  The drive has power, WEAVES, is recognized by the BIOS and Windows 7. However, it does not read or write CD ROM or DVD ROM discs

  I'm out of options.  What to do to make the drive to cd/dvd rom read and write CDs?

  

  Thanks for your help.  Matt

  Received a new DVD/CD ROM today S of Ben and Alan at HP today.  The drive was manufactured in July 2011 and seems to have the same model number information. The old one was from December 2010.

  Installation took about 10 minutes to the included instructions, and the player now plays all CD and DVD media.  Thanks to the HP support for replacement of equipment warrantly quick fix.

• I have a laptop SVF1521P2EB model. Since I put victory 8.1 the dvd player has falt error 19-the register

  I have a laptop SVF1521P2EB model. Since I put victory 8.1 (I Think) the dvd player does not work. The pilot is there and looks ok, but reports the error 19 which says that there is an error in the registry. Any help to fix it please

  Cheers, will have a goat that

• Windows media player error c00d1163 cannot read dvd

  error cood1163 cannot read dvd, says problem with copy protection with video from the dvd player and decoder card. recent problem was working before

  Please create a new thread for assistance. Don't forget to provide the exact problem in as much detail as possible, as well as all the error messages in their entirety and any other information that may be useful.