DVD player not working error registry (Code19)

My DVD drive has stopped working. Device Manager displays an error - "Windows cannot start this hardware device because its information for configuration (in the registry) is incomplete or damaged (Code 19). I tried to use the search for Solutions, but he found nothing. I tried to turn off the drive (in Device Manager) and restart - the same error. I have attached an external DVD drive - both drives had the error. I ran Registry Mechanic who reports that there are no problems with the registry! Nortons diagnosis reports the 'Fail' error using the VxD (Code 19) charger. I found a few useful solutions on the internet (which related to XP but I am on VISTA) who suggested to remove some values in the registry (using REGEDIT) and then restart. I tried - but same running REGEDIT as an administrator, it wouldn't let me delete the entries. A friend suggested using the Windows disk - but I did not - the machine came with the OEM software and no disc. I have created a recovery disk, but I don't know if this can work as a Windows disc. I certainly don't want to do a full restore, if I can avoid it - last time that is is past that it took "Recover My Files" about a week to fully scan my drive and recover what she could. Someone at - it ideas? Thank you

Hello

19 code means there is a driver conflict such as two devices attempt to use the same resources.

Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack.

Normally the above will solve this problem otherwise working your way down through them, even if you did
them before.

Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit

The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461

When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052

Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems

CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/

Hope these helps.
Rob - bicycle - Mark Twain said it is good.

Tags: Windows

Similar Questions

  • DVD player not working not not since upgrading to Windows 10?

    Improved to win 10 of Win 7 and now cannot get my DVD player to work. Checked info from Device Manager which advises (Windows cannot start this hardware device because its configuration in the registry information is incomplete or damaged (code 19).) I tried to remove and reinstall the DVD player, but the error message still appears. Any ideas of how to solve my problem?
    My last resort would be to roll back to Windows 7 if I can't figure it out. : confused:

    I have the same problem with my SATELLITE A500 - 19(d) is code19 drivers must not be installed correctly.

  • DVD player not working not not with win 8.1

    Hello. I have the HP pavilion 15-e020TU laptop. My DVD player has worked with windows 7 and windows 8. After the upgrade to windows 8.1, the DVD player does not work. The Windows Device Manager find the DVD player, but represents a brand yellow error. I chose "update driver software" and then "automatically search for updates of driver software". Then the name changed from 'Mitsumi CD drive' to 'hp DVD A DU8A5SH'. And still does not. I installed the update of the firmware from http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv481en&cc=us&dlc=en&lc=en&jum... But a command prompt displays "error: no readers mitsumi found.» What can I do now?

    Hello:

    Try each of the steps in resolution 2, 3, 4 & 5 on the link below.

    One of them normally solves the problem.

    http://support.Microsoft.com/kb/314060

  • DVD player not working not not Satellite Pro A100 - Code 37 error

    Hello

    Someone help on this?

    I have an A-100 and the DVD player has stopped working in XP. I checked the Device Manager and see XP disc but returns this error "Windows cannot initialize the device of this hardware driver. (Code 37) »

    I also noticed that ASAPI.sys is not running in the Task Manager.

    I'm guessing this has something to do with the problem.

    I tried to reinstall the device drivers, but this made no difference. Any suggestions?

    Hello

    Error code 37 means the driver returned failure from its DriverEntry routine.
    You can try to delete the driver from Device Manager and rebooted the new OS should recognize the drive device and initialize the driver again.

    If this is not enough, try this procedure:
    Run REGEDIT and open the following folders:

    HKEY_LOCAL_MACHINE
    -> SYSTEM
    -> CurrentControlSet
    -> Control
    -> Class
    {4D36E965-E325-11CE-BFC1-08002BE10318}

    After you click {4D36E965-E325-11CE-BFC1-08002BE10318} you should see two settings on the right side:
    "Upperfilters".
    'Lowerfilters '.

    Click on each of them, press DELETE, and then click YES.

    Then restart the laptop and see if it was useful.

  • Satellite L30 - DVD player not working not - error code 19

    Carpet * a dvd - ram UJ-850 s ATA device

    He has a problem and does not work, it shows this message in device manager:

    Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

    Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

    I click find solutions, he search some time and gives me nothing, just disappears.

    How to run again?

    Thank you

    Hello

    Have you tried to remove the upper/lower case filters? How do I got the support from Toshiba:

    Follow the these instructions to delete the upper/lower filters: *.

    Click Start--> Run--> and type 'regedit' followed by the Enter key
    Expand the "HKEY_LOCAL_MACHINE" key (it looks like a folder) by double clicking it (or clicking on the '+' next to it.)
    Expand the "SYSTEM" key
    Expand the "CurrentControlSet" key
    Expand the "Control" key
    Expand the "Class" key
    Please look for a key containing the following string of letter and numbers: {4D36E965-E325-11CE-BFC1-08002BE10318}
    High light this key by left clicking once on
    On the right side you are looking for "UpperFilters" and "LowerFilters" in the "Name" column, once you find that these please remove in a right click on it and choose 'delete '.
    Please exit the registry by clicking on the 'X' in the upper right of the screen
    Restart your computer

  • DVD player not recognized; error code 10

    Our Museum has a Dell Optiplex 745 on which the XP operating system has been replaced by Windows 7 Professional.  The DVD drive is not recognized, and the error code 10 stipulates that the driver could not be loaded.  I tried upgrading the driver online, but I was told that the driver installed is the right one for this player.  If I remove the drive with the machine on, uninstall the driver, stop and then restart and then restarting to reinsert the DVD, the computer recognizes the drive and install it and it works.  When you restart the computer the next morning, the car disappeared again.  Would appreciate any help I can get!

    Thank you!

    Werner Horlbeck

    Hello

    Read this link which has also a few solutions:

    Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
    http://support.Microsoft.com/kb/943104/

    --------------------------------------------------------------------------------------

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    Then run checkdisk (chkdsk).

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    ==========================================================

    After the foregoing:

    References to Vista also apply to Windows 7.

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The DVD player does not work after installing Windows 7
    http://support.Microsoft.com/kb/975270/

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
    Setup after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and the
    correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry settings for your
    CD/DVD drive someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays
    all devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Pavilion dv6-6c53cl: dvd player not working not not after restoring - all missing drivers, does not appear in Device Manager

    Recently, I have restored my computer dvd6-6c63cl of flag State 'out of the box.  The dvd drive no longer works.  When you put a CD, you can hear him swirling but the screen does not open.  In addition, in the Device Manager section, dvd is not listed.  I think that I need the drivers, but I did have luck to find them on hp.com (just a recovery disc, you can order).

    I tried some of the solutions on this forum for other computers, but is it didn't work (FixIt) or things in the registry (filters) were not there and one was something that was 32-bit and since it's 64-bit, I was afraid to try it.  Clearly, I don't know enough about computers.

    In which case it is important, I recently had my fan replaced and do not know if the dvd player worked after that.  Obviously not used often.

    You can provide any help would be greatly appreciated.  The computer is 3 years old so I don't want to add 'guaranteed' type plans, but at the same time, I don't want to replace the computer for something so little.  The restoration of fixed the problems I had (internets public wouldn't connect and updates did not exist).  Thank you!

    You may consider replacing the internal DVD player or using an external DVD burner.

  • DVD player not working not not on Satellite Pro U400-142

    My DVD player does not work. I insert a disc, you can hear the drive works for some time, but then nothing happens. I checked the Device Manager' - under readers of CD-ROM/DVD-ROM it shows: MAST * A DVD-RAM UJ862AS, but there is a black exclamation point in a yellow circle next to it. I opened the dialog box 'Properties' and under the status of the device, he wrote:

    "Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41)

    I would try try to resolve the problem by reinstalling the driver. I checked Toshiba site for the driver, but can't find it.

    I would be very grateful if someone could give me some ideas on how to sove this problem.

    Thank you

    P

    What you can do is follow:
    Remove the optical drive from Device Manager drive, restart your laptop.
    The reader should be acknowledged and properly installed. If the same thing happens again try it please > http://aps2.toshiba-tro.de/kb0/FAQ8101LA0000R01.htm

  • DVD player not working not not on Sat 1800-614

    Hello

    I bought a Satellite 1800 614 3 years ago, provided with a DVD player. At this time there is no problem to read the DVD. I did not use it for a while and when I tried to use it I discovered that it does not read new DVD, I can see the movie but the two images and audios are dispersed and disrupted last year. It only works with the old DVD (2001-2002) and DVX and so on...

    I was told that it is because they changed the format of DVD or something like that. Can you help me to fix it? Is it possible to update the BIOS any help? Maybe the firmware? You know the one that I need and where I can find it? I tried to update the drivers for DVD but it seems that he does not accept the change. Do you know how to update the drivers too?

    THANKS TO ANYONE WHO CAN HELP! I HAD THIS DVD PLAYER AND I NEVER GOT TO USE IT!

    Hello

    I put t know if you tried, but you can try to install some beyond news who is responsible for playing movies on dvd (files)

  • Burning DVDs in DVD player not working not

    We have problems with burning DVDs from our PC (slideshow photos and music). It downloads very well and gives us a confirmation that he copied the disk correctly (we can see in our PC) However when trying to see it from a DVD player does not work.  We used a DVD-R disc.  We have windows XP/Windows Movie Maker.  We used these DVD-R discs for other records from a digital recorder and they worked very well in our DVD player.

    We have problems with burning DVDs from our PC (slideshow photos and music). It downloads very well and gives us a confirmation that he copied the disk correctly (we can see in our PC) However when trying to see it from a DVD player does not work.  We used a DVD-R disc.  We have windows XP/Windows Movie Maker.  We used these DVD-R discs for other records from a digital recorder and they worked very well in our DVD player.

    ============================================
    Burn a video DVD that will play in a free-standing DVD player you
    need software for DVD creation... the only version of Windows XP that
    included this option was the "Windows XP Media Center Edition 2005.

    See the following article:

    Movie Maker 2 and DVD burning software-
    Media Center 2005 Edition
    http://www.Papajohn.org/mm2-DVD-MCE.html

    Perhaps the following freeware should help you get started:

    (FWIW) It's always a good idea to create a system
    Restore point before installing software or updates)

    DVD Flick
    http://www.dvdflick.NET/Download.php
    (the download is: "dvdflick_setup_1.3.0.7.exe")

    Save the file to a folder on your hard drive and
    install from there.

    Be sure to read the Guide:
    http://www.dvdflick.NET/Guide.php

    Tutorials:

    Tutorial DVD Flick
    http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

    Burn any Format video DVD PC
    http://www.freevideoworkshop.com/dvdflicktutorial.htm

    To create a video DVD base that should play in a free
    permanent drive DVD... try the following...

    First... read the DVD Flick Guide to familiarize
    with the program.

    Open DVD Flick and insert a blank DVD in your drive.

    If the window of Autorun from your computer... just close it.

    Click the project settings button and check... Video /.
    Target format... residents United States... Choose... NTSC /.
    Accept.

    The title button left click Add and navigate to your
    Video clips and select the ones you want on the DVD.

    You can have by selecting one and then use
    the up and down buttons.

    Left click on the button create DVD / OK / Yes / Yes.

    Please wait while the DVD is created.

    When the text "Completed successfully" is displayed you
    DVD Flick can close. Now you can eject your DVD
    and play in your DVD player.

    At some point you might want to buy more
    Advanced Cyberlink, Nero, Roxio, software
    Ulead, etc... but at least it is a start.

    Good luck.

    Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • DVD player not working not properly

    my DVD player worked... then all of a sudden one day, it did not show the DVD I insert... and I have tried others... the same result came... when I try to open the drive d, it says please insert a DVD, but I have all ready insert a... I tried to update and it says the new update have all ready installed... Please if anyone knows how to solve this problem... send me an answer as soon as POSSIBLE... Thank you

    Hello

    I suggest to try this patch and see if that helps:

    http://www.kapilarya.com/Windows-8-not-showing-DVD-drive

    I hope this helps. Good luck :)

  • DVD does not work error message CDDCDW TS-L633N windows G - 72 7

    I've been using HP inside the computer, I was told I have a problem with my windows G72 7, the number who came to fix is CDDVDW TS-L633N I need help to fix, drive DVD My simply not want it work appers to load but nothing shows

    Hello

    First, try the automated Microsoft fixit at the link below.

    Windows 7

    Check if the drive works now.

    If it still does not work, click on the Menu start, open the all programs, open accessories, right-click on command prompt and select "run as Administrator".  In at the prompt, type the following command and press ENTER.

    sfc/scannow                (Note that there is a space between sfc and /)

    Let the entire process, then the output type and press ENTER.

    Then, click on the Start Menu, open Control Panel and click Device Manager.  Click to open the CD/DVD-ROM drives.  Right-click on the drive and choose uninstall.  Do not delete if requested drivers.  When the device has been uninstalled click the icon 'Search for hardware changes' (usually just below help in the toolbar).  Let windows reinstall the disc and see if it works now.

    Kind regards

    DP - K

  • Satellite L450D - cd/dvd player not recognized: error code 39

    Hello
    drive my laptop has disappeared from the 'my computer' screen and will not load disks; You can hear it turns as it plays, but then nothing comes. I checked for it Device Manager, and it comes up with the message "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ».

    I tried to update the drivers for it, but windows says I have correct and up-to-date drivers installed. I can't seem to find the drivers for it on the toshiba site and to be honest I'm not entirely sure to try to uninstall and reinstall the drivers without a bit of comfort that I have the correct driver. I'm tempted just to do a system restore, but I have a lot of things stored on the laptop that I (stupidly!) have not backed up yet and can actually copy in the distance the system on disk, because the hard drive does not work...

    If there is a way to access installing the correct driver for the disc drive, and then uninstall the damaged one and reinstall the right pair, I prefer to do that.

    Any help on this would be greatly appreciated!

    Thank you

    Hello

    Check it please http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=259036 another forum user posted on the same issue. Try again with the advice given by PauPau.

  • Windows 8 Upgrade, Toshiba Satellite C660 Matshita DVD does not work error code 19

    I just upgraded my Toshiba Satellite laptop to windows 8 and having a problem with my Matshita DVD-RAM UJ890AS. In Device Manager, I got the error "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19). Now, I tried to change the registry, but it shows no upper or lower to remove, I also uninstalled the driver and re-installed and I used the automated microsoft fix dvd all to nothing does not. Windows troubleshooting tool shows the problem but can not solve? Help me please!

    HEALED!


    All you have to do to avoid this error, code19 is to uninstall Toshiba Recovery Disk Creator and Toshiba Recovery Disk reminder. I thought that it had been uninstalled before that I've updated but I was wrong. I just uninstall both and hey presto it works :)
  • Satellite A100 - DVD player not working not not after a CDDA extraction

    Hello.
    I have the same question of the user who posted this:

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=23501

    All started when I tried to copy an audio CD which was pretty bad. After that, I can not listen to audio CDs more, nor see any video DVD; the drive is unusable for this.
    Work of data transfer.

    I think that request and emphasizing the goal a little more than normal and * time * should not be a disk almost unusable.
    Since it is the question of the other user, I feel like that.

    (More difficult) replacement disks are available for sale (the PC is out of warranty a month)? Or there is no other solution? Thanks a lot to read me.

    Francesca

    Hi Francesca

    Are you sure that it's a hardware problem?

    This looks a bit like a malfunction of reader lens, but perhaps it's only a software problem (registry)...

    Sometimes bad registry entries could prevent the equipment works properly.
    I mean the value of the upper and lower filter.
    Completely remove the Upperfilters and Lowerfilters from the following registry key values:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
    and restart the laptop.

    But of course if the lens of the player is unable to calibrate properly and therefore it is not possible to read the other CD/DVD.
    In this case, the disk must be replaced :(

    The problem is that not all readers are compatible because different master/slave/c-select settings. If you want to buy and new CD/DVD drive then you should certainly contact the service provider allowed in your country to obtain and information which drives are supported and can be installed.

    Best regards and happy new year

Maybe you are looking for

  • I can't approve my iPhone for restore from iCloud

    I had to reset my iPhone 5 s (running iOS 10) but I can't restore from my backup to iCloud. He asked my previous username for my iPhone, I forgot. On the screen, it is said, "go to one of your other devices signed in iCloud to approve this iPhone". I

  • Dell and HD 5770 display port

    Maybe it's more a mug just about shot. I just bought two P2415q of dell monitors. They display only video via HDMI or a DP HDMI adapter. The only way I ever had video off the report of DP was once when I hot swapped the RFP while the HD5770 was still

  • Internet radio apps for older ipod touch

    I have an ipod touch older (ios worms. 6.1.6) and want an internet radio app, but everything I try in the app store is for ios 8 or superior... where can I get legacy applications usable for my ipod? Thank you

  • Access my external hard drive to Windows on my new Mac

    Hello world I am a new user of Mac Yosemite, recently moved from Windows and I am a passionate photographer All my photos are saved on two external hard drives of laptop computer Windows Is it possible to access outside data by car and it is hard on

  • In 2012 LV &gt; &gt; help &gt; &gt; find examples does not

    I observed problem with 'Find example' does not work in 2012 LV. Everybody is watching the same question.