DVD player not working not not Satellite Pro A100 - Code 37 error

Similar Questions

• Try to get the HD-DVD player to work on the Satellite P100-463

  Hello world.
  I bought this baby the weekend and since I am struggeling trying to get HD-DVDs to work on it. I added the HD_DVD xbox 360 drive, but Power DVD Software Advisor continues to say that the graphic card 9Geforce Go 7900) drivers must be updated to read HD-DVD content. Now, there is no available such as newer driver installed (84.0?)

  Can someone please advise if the card supports protection hdcp anyway? Maybe my problem is another source.
  Thanks for the tips.

  Wait do you use player designed for the Xbox in the Satellite P100?
  Hmm, I m surprised that this device is compatible with the Toshiba laptop.
  Anyway, as far as I know you need a special DVD player to play and watch HD-DVD on the laptop.
  A simple WinDVD does not support the new HD-DVD.

  By the way: I know a Toshiba model that shipped with the HD_DVD drive.
  It was a Qosmio G30 DVD HD model.
  I found a new Nvidia GeForce Go7600 8.3.2.7 Version graphics card driver update in the download section of driver on the Toshiba site
  But I put t know if it s compatible with your card...

• Satellite Pro A100: CD/DVD player will not play the audio CD or video DVD

  People,
  I have a Satellite Pro A100, with a RUG * a DVD-RAM UJ - 841 S Drive.
  It will read fine data disks, but refuses to play with the audio CD or video DVD.

  I tried to uninstall & Re-Installing DVD - RAM Driver;
  That got rid of the "IO error" that I received, unfortunately I don't notice the full error: S.
  He now just doesn't see the drive. Someone at - it ideas?

  I did a full windows update, and the Toshiba Diagnostic util tell me anything useful except "Fail" :(

  I found a thread in this forum that describes a similar theme:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19747&MessageID=72404

  Sometimes this error is displayed because the player does not support the environment.
  Always it is every way is supported by readers and I think that in the user manual, you will find an index CDs or DVDs compatible

  Maybe the drive is defective and can not calibrate lens in the right position.
  But this laptop is not very old, and I can't imagine that the drive is defective
  However, nothing is impossible.

  What you can do is to carefully clean the lens and see that it will help.

• Satellite Pro A100: Mat * a UJ - 841 s DVD Multi drive does not

  Hello

  I have a Satellite Pro A100 with a carpet * a UJ - 841 s DVD Multi Drive.

  Recently, I decided that as my laptop is running slowly I wanted to format and reinstall XP Pro, I used a standard version of OEM XP Pro (not seller specfic) and he went on the formatting and the reconstruction of my laptop.

  Fortunately, I used Acronis True Image to backup my laptop before I did that my above mentioned dvd player is so more to bury properly (all the drivers and the necessary software has been installed). Before I formatted the laptop I could burn on + and - DVD (r, rw and ram) now that the laptop has been rebuilt, I can only burn to dvd-r/rw/ram.

  I restored from my laptop to the picture created by Acronis and can use the drive normally again to burn + and - DVD.

  Does anyone know why this would have stopped working in the new installation of Windows? I also tried to create a virtual machine using the same xp disc but it always gives me the problem of dvd player.

  Thank you

  Rich

  Hello rich

  Have you noticed the same problem after using Toshiba designed recovery DVDs?

• Carpet * a DVD-RAM UJ - 841S does not recognize movie DVD on Satellite Pro A100

  I have a portable Satellite Pro A100-PSAAPE.

  Initially the played DVD movies very well, but now it does not recognize DVD movie at all.

  The drive itself is recognized and works very well with recovery DVD and CD-ROM.

  Phone support: they had me reinstall the driver and boot from the recovery DVD. This does not solve the problem. They then said to do a system restore. Tried, but it seems that the previous restorations of system are in themselves unsuccessful and the restoration of the system that has worked has not solved the problem.

  MediaPlayer and Intervideo WinDVD seem to work well, but do not find the DVD in the drive.

  They advise now reinstall me to factory setting, but don't want to build the laptop up to scratch etc, so I'm hoping that there may always be a solution.

  Can anyone help please?

  Thank you

  Best wishes

  idob

  Hello

  You understand that you must specify if it is a hardware or software problem.
  Unfortunately, you can find this secret only using recovery DVD (CD).
  Toshiba recovery installation will define the laptop back to the factory settings. In this case you may find whether or not the CD/DVD device is defective.

  If the player will not play the DVD after the reinstallation of the operating system, then chances are that it is a CD/DVD drive error.

  Good bye

• DVD player not working not not since upgrading to Windows 10?

  Improved to win 10 of Win 7 and now cannot get my DVD player to work. Checked info from Device Manager which advises (Windows cannot start this hardware device because its configuration in the registry information is incomplete or damaged (code 19).) I tried to remove and reinstall the DVD player, but the error message still appears. Any ideas of how to solve my problem?
  My last resort would be to roll back to Windows 7 if I can't figure it out. : confused:

  I have the same problem with my SATELLITE A500 - 19(d) is code19 drivers must not be installed correctly.

• 2 keys of the keyboard do not work - Satellite Pro A100-229

  Hello

  Just bought a laptop Satellite Pro A100-229 used yesterday.
  The following keys do not work: B and SPACEBAR!

  How could I correct these mistakes please?

  Thank you very much.

  Robert

  Hello

  There is just one way to fix it. the keyboard needs to be replaced
  It s is not possible to replace the single keyboard of course, you can remove the keys, but this will not help you if the button just does not work.

  To the new keyboard, you must contact the ASP in your country... guys would be able to provide good keyboard...

  See you soon

• Satellite Pro A100: Bluetooth does not work

  bought a toshiba Satellite Pro A100... came with a built in blue tooth... al worked well... until 4moths to fight back my computer had to be repair he was expelled to the toshiba returned however restarted by bluetooth/service application are not on the taskbar.

  I am looking for the computer n found in system folders aside my blue tooth stack but how to make the blue tooth to work.

  Make sure the WiFi switch is on.
  Press + and select the bluetooth antenna.

  Check if your Bluetooth module has been correctly detected:
  -Open the DeviceManager (start-> Run-> "devmgmt.msc").
  -Open the section "system devices".
  -A "Bluetooth ACPI" device should be available.
  (The system has detected the BT module if this is the case).

  Install the battery last Bluetooth (= drivers + Bluetooth management software) v5.10.12T.
  You can download it here:
  http://APS.toshiba-tro.de/Bluetooth/redirect.php?page=pages/download.php

• DVD player not working not not with win 8.1

  Hello. I have the HP pavilion 15-e020TU laptop. My DVD player has worked with windows 7 and windows 8. After the upgrade to windows 8.1, the DVD player does not work. The Windows Device Manager find the DVD player, but represents a brand yellow error. I chose "update driver software" and then "automatically search for updates of driver software". Then the name changed from 'Mitsumi CD drive' to 'hp DVD A DU8A5SH'. And still does not. I installed the update of the firmware from http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv481en&cc=us&dlc=en&lc=en&jum... But a command prompt displays "error: no readers mitsumi found.» What can I do now?

  Hello:

  Try each of the steps in resolution 2, 3, 4 & 5 on the link below.

  One of them normally solves the problem.

  http://support.Microsoft.com/kb/314060

• Re: Satellite Pro A100 PSAA3E: after XP installation does not work

  Hello

  I recently bought a psaa3e Satellite Pro A100.
  I formatted and installed Win XP. Everything works except the sound.
  In Device Manager its shows a PCI device problem.

  I think I need the pci to install before my sound card is recognized.
  I could be wrong and often am installed all drivers I could find on this site for my laptop.
  Any suggestions please, its driving me crazy.

  brgds

  spadger

  The solution is simple.
  After installing Xp, you must install all the service packs. SP2 is important.
  In addition, you will need to upgrade the XP to the last State. All fixes and patches must be installed also.
  The * KB888111 * and * KB835221 hotfix * must be installed before installing the audio driver.

  After installing the hotfix, restart the computer, and then reinstall the audio driver!

  Good luck

• Satellite Pro A100-622 can not read the card SD and Memory Stick with Windows Explorer

  I have a Satellite Pro A100-622 running MS Vista Home Basic Edition. I tried to use the card reader integrated with SD and Memory Stick card but cannot view the contents using Windows Explorer.

  In both cases, the laptop recognizes the card and try to install new hardware. Unable to do so, he asks the drive of the software provided with the cards. Any software not provided with a card and I cannot find drivers to make the drive work.

  The only application that I can find on the laptop that is associated with the player is a module of SD formatting, but I don't want to format the card (s) I want to just read the current content of them and add files.

  Any ideas?

  Hello

  You can download the drivers (and especially in your case for the sd-card-reader) here:

  http://PC-support.Toshiba-Europe.com/Vista/

  and here

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  So the other point is the service of the SD card must be enabled in the start menu-> Control Panel (change to Classic view)-> Administration-> Services-> Chip card (at this point, you must activate the service and configure it to start at windows startup).

  If you have any other questions, just ask. ;)

  Good bye

• Satellite Pro A100 - recovery disc creator does not exist!

  Can anyone help! My laptop works fine, but I wanted to create a bootdisk problems.

  But Toshiba Assist > Protect & Fix > does not give me an option to create a startup disk.
  Should this with this model?

  I have the recovery disk Toshiba that came with the computer, but were warned NOT to test, otherwise it can actually cause me problems!
  Any ideas?

  Satellite Pro A100-302
  Part number: PSAACE-008002EN

  This option is not available on this model of laptop. Because of this, Toshiba offers recovery DVDs which can be used for the installation of operating system.

  > I have the recovery disk Toshiba that came with the computer, but were warned NOT to test, otherwise it can actually cause me problems!
  This info can only come from people who don't know what they are talking about. Please ask this person what he exactly meant, and I will offer you the good explanation on the recovery procedure if you want to.

• Satellite Pro A100 - it does not recognize 4 GB of RAM

  Hello
  today I purchased two 2 GB RAM Corsair DIMMS (DDR2 - 667 mhz) for my Satellite Pro A100.

  After that I updated the BIOS it detected the 4 GB of RAM, but the balance of RAM on the boot prompt checks only 3 GB of RAM. So I can use only 3 GB of RAM (I use ubuntu 64 as an operating system). When I try to RAM into another laptop, it works perfectly. A memtest86 + says check: no error. When I plug in a dimm in the laptop, it is correctly detected as a 2 GB dimm module (tested two DIMMs into the two slots on motherboard)

  Anyone else seen this behavior? For me, it looks like a limitation or a bug in the version of the BIOS.

  (The processor supports 64-bit (core2duo t5500))

  concerning
  Kai

  Hello

  What Satellite Pro A100 you have exactly?
  As far as I know that some models can only be upgraded to 2 GB of RAM.

  It's really not easy to say what is the reason for this because I m confused on the subject of what the BIOS recognize the 4 GB of RAM, but not the boot prompt.
  I'm not sure that maybe the modules are not compatible with your laptop. You can test other modules?

  Welcome them

• Satellite Pro A100 is not recognized any amount of RAM

  Hello

  I have a Satellite Pro A100 and I just bought 1 GB of additional memory. There are two locations, each with a capacity of 1 GB.
  When I put the new memory into the slot and the old 512 MB original memory in slot B and the computer says it is 1 GB.

  I have them two-way round so that the 512 MB is has the 1 GB in B. Now the computer says that there is 512 MB.
  Is there anything I can do to work B slot? I have the latest version of the BIOS update.

  Thanks in advance.

  Hello

  > original 512K of Ram also works in A slot, but not in the housing B.
  This looks like your slot B is defective, mate :(

  I think that, in this case, you can't. You can swap the card mother but that s all.

• Touchpad is not what I want - Satellite Pro A100

  Hello

  I have a PSAACE-00V002EN Satellite Pro A100.

  I seem to have a problem with the touchpad - he decides for itself I want to minimize a window when I click in the page (web browsers, etc.). I could try to use the scroll bar or click a link but is not what I want it - it will minimize or expand to full screen. Sometimes it doesn't let me select anything or put my cursor in a text entry box.

  I installed the latest synaptics drivers but this does not at all affect.

  Kind regards

  Dave.

  Hello

  The same problem occurs when you use the external USB mouse?
  Did you install the 3rd party applications that could have a bad influence on the work of touchpad?
  You know, it s interesting to know if this happens on the operating system that was fresh installed on the laptop