DVD printing with 100 Pro

Similar Questions

• Printing with Acrobat Pro XI

  Why is what I can't reduce the size of the mask for printing Adobe Pro XI?

  You cannot change the size of this dialog box, but you can simply scroll up and down, as you did in the screenshots, so what's the problem?

• How to enable two-sided printing on MacBook Pro with Canon MX490 printer

  Hello

  I have the MacBook Pro (retina, 13-inch, early 2013) and OS X version 10.11.4 (15E65) and Printer series Canon MX490.

  When I try to make a double-sided, the printer settings printing does not allow me activate two-sided printing.

  

  Also when I go into the settings of the printer, there is no option for me to select this option to enable printing double-sided or duplex printing etc..

  

  When I try to print with TextEdit settings, I still get the same printer settings and it does not allow me to enable two-sided printing.

  I couldn't find answers online, and frankly it's frustrating. I would appreciate if anyone can help with the problem.

  Thank you very much!

  This is the screenshot of the settings under the printer to textedit. Sorry I don't tie with the original message earlier.

  

• Since Firefox v10. Layout, print preview and print do not seem to work with XP PRO SP2 x 64, but normally work with Win7 x 64.

  Layout, simply change line title to the foreground and freezes the screen except for the ability to close the page and return to the page where Page Setup was invoked. This print preview a gray monochrome page with the normal menu features that normally respond except the function of setting of the Page. Print prints a blank page still. Noticed problems with Firefox beta versions 10 and 11 and 12, with XP Pro SP2 x 64. Firefox version 11 has no such problems with Windows 7 ult x 64.

  Hello

  Please see this.

  Printing problems

• OfficeJet Pro 8600 appears twice in the selection of drop down menu printer with each of the different names.

  Hello!

  I recently acquired an Officejet Pro 8600 and immediately connected to my network wireless as stated in the manual. No other type of connection has been used beforehand and the operating system is Windows 7 64 bit.

  After that the installation of the printer driver appears twice each time that a program asks me to select a printer from the drop of the printing devices in the typical menu of preparation of printing.

  There is an entry for "Officejet Pro 8600 (network)" and something in the sense of 'HP95CDN' (Officejet Pro 8600). I can't remember the exact names off the top of my head, but it is the name of the printer with the 'network' in brackets in one case and a kind of shortcut ID printer with full name in parentheses in the other case.

  According to the program, one of the options gives the desired impression while the other simply causes a queue of indelible impression for the name of the unit in question that is stuck to a few KB of data transmission.

  Usually printing works with the device with the identification of the printer in its name, but I recently had a case where with LibreOffice printing only works with the other choice.

  Can someone explain to me exactly means?

  See you soon,.

  Pete

  Direct entry Wireless will be visible under menu so direct wireless is on... However, since you are able to print another icon (not the network icon) I assume direct wireless is off coz you will not be able to print from wireless directly on the printer if you are connected to the router.
  
  I believe that the icon of the printer (not the network icon) has a port WSD assigned and is automatically detected by the operating system and installed.
  
  Go to service window and check if you have any input that says function Discovery Provider Host and see if it is started. Try to stop the service, and remove the icon of the printer (not the network icon) in the print server properties.
  
  Restart the PC and check if the icon comes back or try to uninstall and reinstall
  
  Let us know the result

• Can I print posters 2 x 2 or 4 x 4 with Officejet Pro 8500 has? Windows 7.

  Can I print posters 2 x 2 or 4 x 4 with Officejet Pro 8500 has? I am running Windows 7.

  Hello

  The 8500 (A910) driver is not support printing posters.

  To work around the problem, you can use another pilot who provide the required functionality:

  1. Enter the control panel > devices and printers, click Add Printer .
  2. Click on Add a local printer.
  3. In use the existing Port, select the port for your printer:
     DOT4 if your printer is connected by USB
     If standard TCP/IP network connection used.
     And then click Next.
  4. Click Windows Update in the list of printers, allow several minutes for what the list will apear again.
  5. Select HP in the column of manufacturing
  6. Select the printers HP Deskjet 6980 series column.
  7. All the steps in the wizard.

  Now, you will be able to use the print feature post using the driver 6980, by setting the option Pages per sheet and poster in the finishing tab.

• LaserJet pro M127fw MFP: print with Windows 10

  Since I upgraded to Windows 7 to 10, I had a problem with printing to my Laserjet MFP M127fw pro.

  In the print preview the page to print looks like square rather than rectangular but the picture about this seems OK. When I print in fact the image is crushed vertically. The problem is the same print with Word, Excel and Acrobat.

  I have been informed that a new driver is required, so I deleted the old driver and downloaded a new one compatible with Windows 10 but the problem persists.

  Thanks for the help but it seems that the problem was that my screen resolution was completely wrong, so that if the image looked OK on preview before printing then it would look incorrect when printing and vice versa.

• HP Officejet Pro 8600 Premium: I have a printer HP 8600 pro works fine with my Windows 7 computer, but not with Windows 8.1

  I have a printer HP 8600 pro works great with my computer Windows 7 & computer laptop, but not with my laptop Windows 8.1. When I tried to print wireless (I didn't try connected), it would print only the first pages of 2 or 3 of everything I tried to print. I uninstalled the printer and inserted the CD to try to re - install and I got an error message indicating that the printer does not work with my operating system. I was able to install it earlier, but now, it will not install at all.

  Too bad. I'm sorry. I'm went to the HP Support Web site & downloaded a new driver & now it works!

• I installed a driver for my printer Hp Officejet Pro L7380. How to connect the printer to the computer that works with windows vista?

  I installed a driver for my printer Hp Officejet Pro L7380. I can print from my computer and it detected that it, I can't scan anything on my computer because it is not connected. I have tryied Conect it but can not select. So my question is, how I connect printing to computer?

  Specify that you are trying to scan a document Hp Officejet Pro L7380 to your Vista machine.  It has only a single computer attached, or is it a printer networked with other computers?

  If you have installed the base drivers and not the additional software that allows scanning etc so maybe it's why you fail.

  Have a look here.

  Software & Driver Downloads
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=au&DLC=en&sw_lang=&product=3198092#n190

  It might be possible with just the base drivers, for other software, such as your Photo editing programs, including painting, for import documents or images from the scanner.  Windows Fax and Scan can be able to do.  When you go in such programs are there options scan and they see your scanner?  If this is not the case, try the full download.

  If you want to of HP to make scanning programs, you may need the-base drivers and software (larger download).

  For my HP ' All in one ' works like a scanner, it was necessary for me to download all drivers and software.

• inside printing with HP Officejet Pro 8000 prints pages out of order

  When you print a 3 page document with my printer HP Officejet Pro A809a print 'two-sided' setting, it prints page 1 to page 3 on the back, then page 2 on a separate sheet. How can I get the printer to print documents duplex in good condition?

  Hello

  You can check the printing preferences and duplex settings, see if you can change the order in this way.

  Set printing preferences and print

  1. In the menu file printing program, click print .

• OfficeJet Pro 8600 Plus: HP Officejet Pro 8600 Plus - Can no longer print with my Mac

  I have been using a printer HP Officejet Pro 8600 Plus via my MacBook Pro (OS X Yosemite version 10.10.4) for about two years with no problems until recently.  Since a few days ago, I'm more able to print wireless, despite the fact that the printer is connected to the network.  Interestingly, the print queue reflects the print job completed, but pages do not print.  In my attempts to solve the problem, I have (i) restore factory settings and re-written information of network required on the printer; (ii) disconnected the printer and waited five minutes;  (iii) unplugged and reset the router. (iv) deleted and reinstalled the software and drivers printer on my laptop.  My laptop is in communication with the printer as evidenced by my ability to scan using HP Scan wireless, but I'm unable to print the document once it is scanned.  Finally, I am able to print the network settings Page in the menu of the printer, but not the printer web page... I get an error message saying 'the printer is busy. Try again later.  Any ideas to fix this frustrating problem would be greatly appreciated.  I apologize if my descriptions are not technically accurate because I am a novice when it comes to computers and networks.  Thanks a lot for your help.

  Thank you for your response and suggestions. I really appreciate it.  You beat me to the punch... only a few hours ago, I was able to get the printer working again... but I forgot to update my post.  As you recommended, I have reset the printing system, downloaded a new driver... hpprinterdriver3.1.dmg... added a new printer... restart the printer, my router and my laptop... and the printer from work once again from my Mac.  Yet once again, I appreciate your efforts... Bravo.

• DMP 4400 G RS 232 connection with Cisco LCD 100 PRO 40N

  Hello world

  I know this question has been asked a little before, but I still have trouble affecting the DMM to control Cisco LCD 100 PRO 40N (Samsung) via the RS232 DMP connection!

  I searched and read every post on this forum, ('Samsung_MDC_RS232_Protocol_Ver - 21.pdf' & rs232.tx_hex =) tried but not vain.

  We have DMS VmWare demo (signs & Cast 5.2, Show and part 5.2) and 4400G with firmware 5.2.

  Also, I connected the series RS232 9 pin female to female that came with the TV on the DPM 4400 G and in the port RS232 TV, configured the DMP in the Task tab view control forward as you can see in the picture to set and define the type of TV for Cisco 40N and Power ON and another task for the display OFF. What I'm doing wrong here!

  Any input will be greatly appreciated!

  You must first activate rs232 on the DMP.  For Cisco views, use the system task called "RS-232: control supported, non-DMTech poster.  This will cause the DMP restart.  Once it has restarted, you should then be able to use the rs232 codes or the built in display of DMM controls.  I tested on the same Cisco display with cable included as has managed to turn the screen off and back on orders of DMM.

• How to choose a print with black ink only on the Office Jet Pro 8600?

  How to choose a print with black ink only on the Office Jet Pro 8600?

  Please read this post then provide some details.   What operating system? For Windows 7, the setting must be in the Advanced tab as shown below.  Note that color ink may still be necessary to avoid that the print head clogged, see here for more information.

  

• Acrobat Pro 9.5.5 - installed new HP printer with scanning capabilities now Acrobat will not work.  How can I fix it?

  Acrobat Pro 9.5.5 - installed the new HP printer with scanning capabilities.  Acrobat message now shows that never ceased to license.  Needs to be repaired.  I tried to fix it with no luck... don't have the original disks to yninstall and reinstall... How can I fix it?

  Hi bartonb4124479,

  Refer to this KB document for help error: "License has stopped working". Windows

  Kind regards
  Nicos

• Print Canon Pro 100 Pro Shop disappeared.

  I've recently updated to CC2015 of CC2014 since the upgrade, I lost Print Shop Pro. It used to be under the file Menu under automate, but is no longer there. It still shows as being installed on my computer. I tried to remove and reinstall all to no avail. Really very annoying. Someone knows how to fix this? Thank you

  the problem has been resolved - in a phone call to canon - with their new studio facility. but the problem was the result of change of name for the directory of adobe. I have now a printing studio works pro.