DVD - RAM drive does not appear in my computer (Satellite M30)

Hello
I have a rug * a DVD-RAM UJ 820 in a Satellite M30
It seems that the driver does not work and the DVD unit is not showing in my computer - the device however seems to work - I was told a solution may be to download the driver and re-install again. Any idea where I can get that? You have any other suggestions on how to fix this?

Thank you

Hello

drivers are located on the download site for the driver from Toshiba:
https://EU.computers.Toshiba-Europe.com
under Support & downloads, download drivers

If this does not help, look around this forum. I saw some other threads on this DVD player.

Good bye

Tags: Toshiba

Similar Questions

  • Windows XP - LG DVD - RAM drive does not read the DVD. It's playback CD only... I ran the fix microsoft program... but it did not help at all.

    Windows XP - LG DVD - RAM drive does not read the DVD. It's playback CD only... I ran the fix microsoft program... but it did not help at all.

    CD/DVD players use different lasers to read CD DVD vs.  Eventually, your DVD laser has grilled.  It might be time to replace your CD/DVD drive.

    HTH,

    JW

  • Combo DVD/CD drive does not appear in Windows Explorer or the Device Manager

    The combo DVD/CD on my laptop drive isn't in Device Manager or Windows Explorer.  The door is not ejected.  You must use a paperclip, poking into the hole to open it.  I also re - it sitting, but it changed nothing.  We had this laptop for 1.5 years and the disk worked great until yesterday when trying to install Starcraft II.  Installation failed and it has messed up also the DVD/CD drive.

    We read some other difficulty advice and tried the upper and lower filters in the registry, but there was no entires of upper and lower filters in the key.

    The specifications of the laptop are:

    HP Pavilion dv7

    Processor Dual-Core Mobile RM-72 2.10 GHz AMD Turion X 2

    4 GB OF RAM

    64-bit Windows Vista

    Hello

    Check with HP Support, their online documentation and drivers, and their known forums
    questions.

    Support HP & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • LG DVD-RAM drive does not read disks in Windows xp

    ? LG DVD-RAM player does not play discs in my Windows xp...
    whenever I try to install the os (operating system) after it has been failed... he couldn't read the original 'os' and every time I install the 'os' by external dvd wrirer... is there any solution to this problem? I want to install "os" to my dvd burner cpu.

    It could be hardware issue, try to run the tool:

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/

    If this tool might not solve your problem, contact the manufacturer of DVD support.

  • Toshiba Canvio Basics HARD drive does not appear in my computer

    Hello

    I have a HDTB110AK3BA - Toshiba 1 TB Canvio Plus Portable Hard Drive for storage 3.0 Basics and the computer will allow it to connect, but it does not appear in my computer / pc is in Device Manager thought but not my pc

    Please help and Windows 7 or windows 8.1 PC do the same thing.

    Hello

    I found the description of the product of this external HARD disk:

    Product features:
    • USB 3.0 - powered portable add-on storage.
    • Voltage of bus capable USB, no need for AC adapter.
    • Easy to use with no software to install.
    • Adapts to large digital files with spacious storage capacity.
    • Protect your drive (internal shock sensor and ramp loading technology).

    Specifications
    • Capacity: 1.0 TB
    • Interface: USB 3.0
    • Transfer rate: up to 5 Gb/s
    • Speed: 5 400 rpm
    • Average access time: 12ms
    • Cache buffer: 8 MB

    It is a HARD USB 3.0 drive. No doubt the HARD drive is not recognized correctly in windows exploerer due to the low power.
    The USB 2.0 port common feeds only 500mA. The USB 3.0 device must be able to 900mA.
    Therefore, it would be advisable to connect this 2 ports USB 2.0 HARD drive with a USB Y cable

  • Drive external DRIVE does not appear in my computer

    Windows says new hardware detected... your new hardware is installed, but it does not appear in my computer. No drive letter is assigned.

    Can anyone help?

    Do you use an external USB HDD? Does a job on another computer?

  • My USB hard disk drive does not appear in my computer, but is seen in the BIOS and not in disk management or anywhere else! What should I do now?

    I use windows 7 Professional 64-bit. The hard drive I had does not appear in my computer, but it does in the bios. What should I do to make the data available to me in the hard drive?

    Sunday, January 20, 2013 11:46:37 + 0000, Nikesh1123 wrote:

    I use windows 7 Professional 64-bit. The hard drive I had does not appear in my computer, but it does in the bios. What should I do to make the data available to me in the hard drive?

    On which computer data has been put on this drive? What is the file
    the drive system?

  • Tecra M7 DVD: CD/DVD RAM drive does not work since the installation of Vista

    I did a clean install on my new Vista Ready M7. He had XP tablet in a first time, and the DVD player worked fine. In fact I used to install Vista (Home Premium).

    Now it doesn't work at all. It runs but does not read. Device Manager tells me impossible to start the device. Tried to update driver and he told me that he has the most uptodate pilot.

    Downloaded all the drivers from the Download Center of Tosh for upgrade of Vista of M7 (who got bluetooth, rotation etc. function properly the screen). But none of the downloads seems to be a driver for the DVD - Ram drive. He cannot find a driver anywhere else (including the Panasonic site).
    DVD player is Mat * a DVD - RAM UJ - 841 s

    Any suggestions?

    Hello

    On the Toshiba driver page, you can find the DLA for Tecra m7.
    Have you tried to install the XP driver DVD-RAM since the Toshiba page on the Vista operating system?

    Maybe it'll market

    But listening the CD/DVD drive uses the current Microsoft drivers that are included in Vista or XP.
    This is why an additional driver should not be necessary!

    An additional proposal;
    Remove the drive from the Device Manager CD/DVD and restart the laptop.
    After restarting again the OS should reinstall the drive and renew the software.

    Another tip:
    -Launch the registry
    -Choose the registry key;
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
    -In the right pane, click UpperFilters and LowerFilters, and then click on remove.
    -Reboot the laptop

  • DVD - RAM drive does not recognize blank CD

    When I check the properties of the DVD-RAM drive before inserting a CD, to the title of the record, I find the check box turn on CD on this drive already ticked. After that I insert a blank CD in the drive, DVD - RAM turns to CD. When I double-click on the CD icon, a warning message appears "D:\is is not accessible. Incorrect function ". When I opened the properties with the blank CD in the drive, I see that the box enable CD recording was erased. Not to mention that the screens of CD Free properties 0, use 0. If I once again re-checkmark the box above then CD resumes its normal operation with Windows built-in CD burning software, but continues to display an incorrect number of bytes in the areas of free / used. I installed on my Roxio Drag-to-Dsc computer. Let me emphasize that my DVD player had performed flawlessly with Roxio installed from the beginning. This problem came only recently. Is it possible to disable Roxio without uninstalling the computer?

    Hi Richard,

    You can check if the following is useful.

    Method 1: Run the next Fixit tool to check the issue.

    Your CD or DVD drive cannot read or write media

    Method 2:

    Step 1: Uninstall and reinstall the Device Manager DVD player. Automatically search for updates to the firmware on the manufacturer's Web site.

    a. click the Start button and then right click on my computer. Click on properties.

    b. click on the Hardware tab, and then click Device Manager.

    c. now, expand the CD-ROM/DVD-ROM drives, click with the right button on the CD-ROM/DVD-ROM drive and click on uninstall.

    d. restart the computer.

    Step 2: Log on to the DVD drive manufacturer's website and install the latest updates from driver\firmware.

    I don't think that there is a way to just disable Roxio. For more help, you can contact Roxio support.

  • E300 satellite - DVD Ram drive does not work with Win 8

    Hello

    I get an error message on my dvd - ram drive - Mat * un UJ8A0AS DVD-RAM

    Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

    I tried the solution of Microsoft Web site for this problem, but it did not work.

    Is someone able to recommend a fix for this problem. Tried to uninstall and reinstall the device without result.

    Have you tried to remove the device from Device Manager and reboot the laptop?
    After reboot of the device will be recognized and installed again.
    Please, do it and see if the problem still occurs.

  • Aspire 5740g and the dvd drive does not appear in 'my computer '.

    I had to have a new installed hard drive I got an error message saying old default disk.

    I also had a clean install of windows 7 that I was uncertain if my discs that I created would be ok.

    So I have not all the gifts that have been installed on the laptop like new. Now, I find that the dvd drive is not displayed in my computer and nothing happens when I insert the disc.

    This has happened a couple of days and I did a restore of the system to a previous restore point.  Does anyone know how to solve this problem.

    I also do not have the secure egis - any ideas how to get this back

    Then... your DVD is probably defective.

    did you check in the BIOS if it is listed on bootable devices?

    Press F2 at startup, if it is not listed, it is defective.

  • USB flash drive does not appear in my computer on XP

    but he is assigned a drive letter in the management of devices. If I right click on the drive in the device management, it goes to the folder in Explorer
    but then disappears

    Hi gstercea,

    Thanks for posting in the Microsoft Communities. The problem description, I understand that the USB does not appear. Provide the following information for the better understanding of the issue:

    ·         Did you do changes on the computer before the show?

    ·         You get the error message?

    I suggest you follow the steps in the article.

    Advanced troubleshooting tips for General USB for Windows XP problems

    Let us know if you need more assistance.

    Thank you.

  • DVD-RAM UJ862AS does not recognize discs-r on Satellite U400

    For some reason any my DVD player wil no longer recognizes discs - R.
    I have a RUG * has DVD-RAM UJ862AS by car.

    Clues?

    Hello

    Try to clean the laser lens with cotton and alcohol tip.
    In my case it worked also try different drive R from different manufacturers. I use the TDK R CDs and DVDs and hand never no trouble.

  • Drive does not appear in my computer

    For unknown reasons, lost a disc Belarc Advisor shows it is present as E: ST500DM002-1BD142] (500.11 GB) hard disk drive 2, s/n W2ABSDBV, revKC45, SMART healthy Statue

    This disc has been defined as a slave drive.

    However is not in drives that may be chosen for cleaning and do not appear in click on COMPUTER.

    I tried the system restore, and he indicated that e: could not be found.

    Is it possible to restore this drive and make it work?

    Hello

    Please keep us updated.

    Please feel free to respond if you need help. We will be happy to help you.

  • the cd/dvd drive does not appear in my computer or in other places! so I can't start the CD

    After upgrading windws vista to windows 7, I can't find cd/dvd drive in my computer (sony vaio) .plz I can do to fix this?

    Hello Rash0411,

    Thank you for your message.  First start by going to your computer manufacturer's website and download/install the latest driver for your device.  We will check the following:
    Click 'Start' > right click on 'Computer' > select 'manage '.
    Click on Device Manager.
    Expand "readers of CD-ROM/DVD-ROM" (you see a yellow!, or you see your drive at all?)
    If you don't see any of your drive, you may need a bad connection of your drive power to the motherboard or power.
    Please let us know.
    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for