DVD-RAM UJ8505 no longer works on Satellite L series

Similar Questions

• Drive DVD RW E no longer works.

  Drive DVD RW E no longer works.

  I'm running a gateway T-1412 with Windows Vista Home Premium Service Pack 2

  DVD RW drive used to work fine, but now when I put music or a DVD in drive E that nothing happens. When I click on my computer and click on the E drive, it opens and tells me to insert a disc that has already been inserted.

  I have tried everything I can think of who isn't much so help is greatly needed.

  Thanks, Dan

  Hello

  Check with Support technique Gateway, their documentation and online drivers.

  Gateway drivers and downloads
  http://support.gateway.com/support/drivers/dlcenter.asp

  Technical support Gateway
  http://support.gateway.com/support/?cmpid=topNav

  Door Documents
  http://support.gateway.com/support/SUPINFO/index.asp?cmpid=topNav

  ---------------------------------------------------------

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burn
  and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting could not help if there is alignment and/or wear issues however it
  a shot.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• E300 satellite - DVD Ram drive does not work with Win 8

  Hello

  I get an error message on my dvd - ram drive - Mat * un UJ8A0AS DVD-RAM

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  I tried the solution of Microsoft Web site for this problem, but it did not work.

  Is someone able to recommend a fix for this problem. Tried to uninstall and reinstall the device without result.

  Have you tried to remove the device from Device Manager and reboot the laptop?
  After reboot of the device will be recognized and installed again.
  Please, do it and see if the problem still occurs.

• Tecra M7 DVD: CD/DVD RAM drive does not work since the installation of Vista

  I did a clean install on my new Vista Ready M7. He had XP tablet in a first time, and the DVD player worked fine. In fact I used to install Vista (Home Premium).

  Now it doesn't work at all. It runs but does not read. Device Manager tells me impossible to start the device. Tried to update driver and he told me that he has the most uptodate pilot.

  Downloaded all the drivers from the Download Center of Tosh for upgrade of Vista of M7 (who got bluetooth, rotation etc. function properly the screen). But none of the downloads seems to be a driver for the DVD - Ram drive. He cannot find a driver anywhere else (including the Panasonic site).
  DVD player is Mat * a DVD - RAM UJ - 841 s

  Any suggestions?

  Hello

  On the Toshiba driver page, you can find the DLA for Tecra m7.
  Have you tried to install the XP driver DVD-RAM since the Toshiba page on the Vista operating system?

  Maybe it'll market

  But listening the CD/DVD drive uses the current Microsoft drivers that are included in Vista or XP.
  This is why an additional driver should not be necessary!

  An additional proposal;
  Remove the drive from the Device Manager CD/DVD and restart the laptop.
  After restarting again the OS should reinstall the drive and renew the software.

  Another tip:
  -Launch the registry
  -Choose the registry key;
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  -In the right pane, click UpperFilters and LowerFilters, and then click on remove.
  -Reboot the laptop

• The mouse no longer works on Satellite Pro A200-1F9 (on Windows and Linux)

  Hello. Suddenly, my USB mouse doesn't work on my satellite pro A200-1F9 laptop. I had this same problem on my Linux (Ubuntu Feisty) for the last week or two, but today was the first time that the mouse no longer works in Windows. Ideas for what's gone wrong? (If I boot Linux with the attached mouse, I get an error message when loading upward.) The mouse does not work it is logged at startup or I plug it later).

  Under Windows and Linux, the laptop still recognizes my external HD which also has a USB connection...

  Thanks, Shoko.

  In my opinion, you should test the USB feature. If you are 100% sure that the USB ports are working well check your mouse or try to use the other.

  Laptop mouse pad still works?

• 'right' button no longer works on Satellite A200-1ZF

  Hi all

  I have a Toshiba Satellite A200 1ZF, and it's very nice. I have no problem with it, but now, since 2 weeks, the 'right' button no longer works.
  I tried a windows reinstall. I took and cleaned the surface, but nothing. He's dead.

  Can someone help me? Thank you.

  To be honest I don't know what kind of help do you expect.
  If there is anything that you can do this means that the keyboard needs to be replaced.

• My HL-DT-ST DVD RAM GH22NP20 does not work in Windows 7

  Does not work my HL-DT-ST DVD RAM GH22NP20 soon after installing window 7 but it woked fine under xp and it reports no errors in Device Manager

  And did you first use the win7 Upgrade Advisor to check if your hardware is compatible win7?

  http://www.Microsoft.com/en-GB/download/details.aspx?ID=20

  Tried the FixIt of base?

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

• SD card reader not working not Satellite A305 series

  I have a laptop A305 series. It's only 6 weeks and I bought it new.

  The sd card reader worked fine up until today.
  It no longer works. Device Manager shows that it is disabled.
  I tried to enable it, but it says that Windows cannot enable it. I tried to uninstall and restart.

  The computer finds the device and reinstalled but it is always disabled and will not work.

  Any ideas what could be wrong? It is running Vista by the way.

  Thank you!

  Amanda

  > It doesn't work anymore. Device Manager shows that it is disabled.
  > I tried to enable it, but it says that Windows cannot enable it. I tried to uninstall and restart.

  Go to Device Manager, even once, mark SD card controller and remove it from the list of devices.
  Then restart the laptop and wait that Windows has recognized this new device.
  Then check if the SD card controller is enabled or disabled.

  Good luck

• Carpet * a dvd - ram uj-850 s in a Satellite P100 has stopped working

  Toshiba satellite p100-286, I bought months ago.
  DVD player has stopped working. The dvd led is turned on, but I can not read my CD or DVD. Is - this hardware problem? Or maybe vista?
  Please someone help me.

  Really sounds like a hardware problem the P100 is a new laptop and warranty should cover all replacements
  Ask at the service of your country for replacement. Everything will be first to check the notebook and then you should get a new ODD (optical drive)

• Audio/video/internet buttons no longer work on Satellite A60

  Since I erased all the computer "Refresh" it, I can no longer use these buttons. I used all the CD delivered to put everything back on the computer, but they still do not work... I really like to use them again, so if you have any ideas...

  I have a laptop satellite A60

  Thank you!

  Annemiek

  Hello

  Have you installed the operating system from the Toshiba Recovery CD?
  If Yes, then all Toshiba drivers and utilities must be installed now and work.

  I think you mean Toshiba controls.
  On my laptop, this application of controls of Toshiba was placed in the control panel. So I think that you will also find it in the Control Panel on your laptop.

  There you can check if certain programs have been assigned to the keys.
  You know IE internet button the Windows media player for the audio button and so on

• Some keys no longer work on Satellite A200-196 after Windows 7 update

  Hi all, I've just upgraded computer laptop of my partner (a Toshiba Satellite A200-196) to Windows 7 after you initially install Windows XP on it (it came with Vista).

  After the XP update, I noticed that some keys were not working. I don't remember the process that I used to solve the problem, but the difficulty that I did, and they were all soon works perfectly. So this is a software problem and not material. I think he might have something to do with the FN key - but I can't be sure.

  Now, I just upgraded the same machine and I have exactly the same problem. Keys that don't work are Backspace, O, P, F, H, K and L.

  Can anyone help please? I tried to reinstall Win7 and the problem is still there.

  Thank you very much

  Andy

  > The keys that don't work are Backspace, O, P, F, H, K and L.

  These keys have nothing to do with the missing software.
  Indeed, the function key (FN key) needs a Toshiba utility particular installation / software to make it work, but the keys Backspace, O, P, F, H, K and L are common keys on the keyboard that don t need no special software.

  That's why I think that the problem is hardware related: simple keyboard malfunction.
  I guess that all of these keys work correctly if you sign in and use the external USB keyboard.

• USB no longer works on Satellite T230

  HelloW,
  I use the Satellite T230 (Windows 7 64-bit) for about a month.
  Once one of the USB ports stopped working. USB-drives are not recognized at all, a mouse - the note is simply a repeating beep. That USB port doen't see a USB key during startup.
  Everything works with a different port.

  I tried the system recovery, update the BIOS. Nothing helps.

  I am really angry and don't know what to do.

  Thanks for any help

  Hi Yu_1,

  > I tried system recovery, update the BIOS. Nothing helps.
  System recovery means that you have already reinstalled Windows from Toshiba disk recovery and HARD drive recovery?

  If so, I think that you have tried everything you can do and it looks like a hardware malfunction :(

  So as next step, contact a service provider allowed in your country and ask the guys for help. They can solve your problem. I think that it s mainboard issue because the USB ports are set on it.
  If your laptop is under warranty, the repair would be free :)

  Here is a list of all the FSA:
  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT

• A60-155 dvd multi burner no longer works correctly

  don't think I've had this laptop for a month yet. the dvd multi drive worked fine, but now it will play only DVDS but not CDs of any kind-it just read more or if she fails to pick up what is cd, it just turns and makes rattling noises. How can I get to recognize the CD and CD-Roms again?
  I tried to uninstall it and now the computer knows it's there, but the shortcut in my computer icon has disappeared, how can I get it back?

  Hello

  What shortcut you mean exactly? It is very strange that, shortly after, the material has this kind of function of failure. You did some changes or something that can be the reason for this? You can burn all types of CD?

  In my opinion, you should try to reinstall the OS using the recovery CD. If there is the same problem again, it may be a defect in the material.

• WIFI no longer works on Satellite L750D

  Internet worked fine a few days ago.
  Now I've lost the laptop wifi signal.

  I have re installed the wifi from the Device Manager, but it will not turn on wireless or the fn key TBS.

  Any ideas please.

  Hello

  What laptop Satellite L750D-xxx you have exactly?
  What system is installed on the laptop you?
  Other FN keys work correctly?
  What is the WLan card status in Device Manager?

  Please provide details. It would be useful for troubleshooting more far.

• DVD player that does not work on Satellite A40-151

  My laptop will play the Audio CD and CD-ROM. However, is no longer, it will play DVDs and it will be also no londer on CD writing.
  Any ideas how I might solve this problem?

  Hello

  Is that what the problem if you are using an original DVD? Try to check if the lens is dirty. I don't know how old is your unit, but if the warranty is still valid, contact the Service partner and let check the device.

  If the reader has this problem reading original DVD movies it's probably hardware malfunction.