DVD ROM drive new satellite 5200-701and

Similar Questions

• Satellite P20 DVD ROM drive may not be recognized

  Hello

  I just replaced my DVD ROM drive, but I had a problem.
  It is a new DVD rom drive I ordered at TOSHIBA also.
  It could not be detected by Windows:
  -Tried to check on Device Manager, not detected
  -Tried to reload the driver, the same problem
  Note:
  Whenever I tried to re - insert the disc, the blue light in the control panel of my P20 beds (I understand, which means that the P20 detects the drive) but I don't understand, is that why Windows XP does not detect it or it does not alarm or error messages.

  Any help?

  Thank you

  Hello

  Try to use the Add Hardware option.
  This question is very strange, but I read on some sites, sometimes a whole new OS install CD player, brings back to life.

• DVD Rom in a Satellite 4030 CD drive?

  I have an old Toshiba Satellite 4030 CD. I would like to know if I am able to install a dvd rom drive in this laptop. If so what models would take on this machine.

  Thank you

  PB

  Hi Breck,

  in my opinion there is no way to upgrade the internal CD on a DVD player because the CD player is set up and could only be replaced with the same model!

  Only an external USB or PCMCIA solution would fit!

  Sorry!

  Rudi

• HD DVD - ROM driver is missing or corrupt on Satellite A200-s 23

  Hi, recently I bought my Toshiba Satellite A200-23 s and now it says that the HD DVD-ROM driver is missing or currupted. The system can not see DVD - ROM. My laptop is still under warranty, but perhaps I can fix it somehow? I found the list of drivers on this site but you've not seen DVD - ROM drivers.
  Thank you

  Don t think that it s a hardware problem.
  I think that it s a registry problem.

  Access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Reboot the laptop.

• P50-A-144 satellite: the CD-ROM/DVD-ROM drive does not

  Version of Windows 10 Home 1607 (Build 14393.187)

  Hello

  After Windows Update Version 1511 1607, the CD-ROM/DVD-ROM drive does not work.
  The D: drive does not appear in Windows Explorer,
  CD-Audios and videos / DVDs do not work.

  In the Device Manager, the following legacy status error message appear:
  "Windows cannot start this hardware device because its configuration information.
  (in the registry) is incomplete or damaged. (Code 19). »

  Could you tell me how to solve this problem?
  Thank you.

  The solution was to uninstall the program "Toshiba Recovery Media Creator' and system settings/Programm features.
  I still don't understand why, but the fact is that after uninstalling the CD-ROM/DVD-ROM start normal work.

  More information here:
  http://www.borncity.com/blog/2007/08...-verschwunden/

• Re: Portable Satellite C - CD/DVD Rom drive is corrupt

  My driver for the CD-ROM/DVD-Rom drive is corrupted TSSTcorp CDDVDW TS L633C
  (Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19))

  I UNINSTALLED THE DRIVER AND RE STARTED BUT GET THE SAME ERROR
  Do you know where I can load an update.

  Jer

  I think that you are using Windows 7 (or vista or XP) then there is automatic and manual setting set for code 19 here - http://support.microsoft.com/kb/982116

• Satellite S1800-750 - DVD ROM Drive doesn't recognize any CD or DVD

  Hello together,

  I have the following problem:

  In my DVD ROM drive are recognized any CD or DVD.

  But not fundamentally CD or DVD sometimes separate that sometimes the other!

  Where is that which can do here?

  Should I change the DVD ROM drive?

  Help me please!

  JMK!

  Hello JMK

  Can you please be more specific? You have this problem with the original media, self created or if you want to burn own media?

  As far as I know this unit is 4 years old and it is really possible that laser calibration don t work much more and it can happen that in short time you will not be able to use the DVD at all.

• Satellite L300 - 1 4 PSLB8E - cannot open the CD/DVD ROM drive

  Hi, Bérard

  So I have a problem with cd/dvd rom drive.
  After that I updated with the last computer driversmy, the player can not open:(j'ai fais redémarre et c'est le même...) When I press the drive button to open, it flashes orange led for two or three times and nothing happens, the drive is always busy.

  Before reinstalling with the old windows version of the drivers worked well, but that sometimes it did not work... and now it's doing nothing all the time.

  Is my windows 7 x 64, updated drivers to update yesterday. Can someone help me?

  Hello

  You can find a small hole near the CD/DVD to eject the drive.

  Put a small card or PIN in this hole and the CD/DVD drive should eject manually.

  In my case, it always helps.

  Good luck

• DVD + RW disc in the DVD - Rom drive

  I have a Toshiba SD-M1222 DVD - ROM drive. I recently bought a new machine DVD + RW internal separate.
  Discs recorded on DVD + RW not reading no problem in my other internal DVD players, but when I try to play them on my DVD-Rom on the PC, I get a message "disc not recognized", even though I have set up the record to be compatible with other players.
  Is there a way I can get the DVD + RW discs to play on this DVD - Rom drive?

  Hello

  Sorry but there is no way to change this. These are two different formats. I have the same situation with my Satellite.

  If you want to have more information about DVD formats google everywhere.

  Good bye

• CD/DVD-Rom on a Satellite 1110 laptop has stopped working

  Hello

  The CD/DVD-Rom on my satellite 1110 has suddenly stopped working. When I insert a cd or a dvd there is no activity in the drive and when I look in my computer there is no recognized files.

  I used the Device Manager and it says that the device is working normally. It's like the PC just can't 'see' the camera more.

  I used the program of troubleshooting without success and I was wondering if someone technically a little more spirit that had me ideas

  See you soon

  Rob

  Hey, sorry cannot be of any help to you, but I'm having exactly the same problem. I can't find a place to download the new drivers.

  did you progress?

• Slim SelectBay DVD - ROM drive

  I recently bought a second hand Satellite Pro, but it seems to be without a DVD player and has only a weight saving plastic 'trick' in the Slim Selectbay.
  I know that my laptop is now discontinued, but it is anyway to acquire a Slim SelectBay DVD - ROM drive, because they are not for sale in the "Accessories" section.

  Hi Mikey

  In my opinion, you should contact partner in your country. They can order each hardware component or any part of the accessories for each model of laptop computer independent of how old the model has.

• Qosmio G30 - DVD-ROM drive has stopped working

  I have a Qosmio G30 age of 3 years and the DVD - ROM drive has stopped working.

  He still pulls in, but it will not read or burn discs.

  I received a quote of £360 Toshiba to adapt to a new one that seems generous.

  Anyone know where I could get it fixed cheaper than you?
  Or better yet... anyone know where I can I get it fixed?

  David Hutchinson

  Hello
  This is not an answer to your question but can solve the problem if it is the same that I had.
  In my case, the drive tries to spin but it slips. Only the motor shaft rotates and the drive remains at low revolutions that were not even stationary.
  The problem was caused by the fact that the plastic part (black color) of the mechanism which engages the disc (CD or DVD) slips on the
  motor drive, axle and th couldn't do a full rotation or runs at the specified speed.
  The solution is to delete the article in plastic and put a small amount of super glue on the axle and then put it back.

  Where there is a similar issue, I hope that solve you it like I did.

• CD/DVD-Rom drive does not not on Equium A100

  I installed a webcam, and it made my DVD - rom drive does not not with all drives. I uninstalled everything to do with the webcam and it still does not work. Can someone help me solve this problem without using the recovery disk of the product came with my laptop?

  I had this problem before, but I didn't the first time, it's the webcam that has caused the problem. It s webcam trust wb - 1400T. I had to use the product recovery disc and he had a lot of hassle to install all my programs again and this time I'm in the middle of exams and can't get it all done in time for my exams, as I have vital work on here I have to do.

  .. .Please help me... I think it is the driver, but I don't know how to fix it.

  Hi mate

  > I installed a webcam, and it made my DVD - rom drive does not not with all drives
  To be honest I have never seen that the webcam may have a negative influence on the internal CD/DVD drive.
  I see really no connection between the webcam and ODD... very strange
  Do you get any error messages?

  Anyway, in my opinion, you should try these solution ideas;

  (1) remove the drive from the Device Manager CD/DVD and restart the laptop. After restarting again the operating system should recognize the STRANGE and should re-install the drivers.

  2) access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  .. then restart the laptop.

  (3) download and install the tool freeware "CCleaner". This tool repairs registry and solves several problems in System.

  If this does not work, then the new installation of the OS would be wise to check if the problem could be related to a software problem.

  Best regards

• The CD-ROM/DVD-ROM driver failed to initialize

  Keeps my CD/DVD-ROM driver not boot on the market.  Device Manager, says the driver is there, but it does boot, where will not read or write.  It's on an eMachines T3642 that came with Vista Home Premium.  The supplied operating system CD is available but not (obviously) read.  Help me not sysem restore... first restore point is September 22, 2009 and several dates different restoration do not help.

  eMachines support provides no answers on products out of warranty.  This set was purchased in January 2008, has worked very well with several old and a few new programs and material added since then.

  According to the diagnosis of Vista via the Device Manager, the failure of the pilot gave 37 error code.  The driver date is 21/06/2006, version 6.0.6002.18005,.

  Quandry: SOMETHING again loaded in via CD-ROM cannot load because the drive can't read it.     :-(
  The diagnosis of MS an available (on another window) will not download. (?)

  Color me irritated and frustrated (not a good fashion these days).  Help, please.

  Sincerely, Len Anderson

  Hello AF6AY,

  Have you tried to uninstall the dvd via the Device Manager drive then restart PC to see if Windows reinstalls? You can do it. If the problem is still there, can give a try? It is a quick easy fix from Microsoft, here is the link: http://support.microsoft.com/kb/314060. You need to uninstall all third-party software (example: Roxio, Nero, or iTunes) from your computer before you make this correction. After you restart, you can reinstall your software and try again to see if that solves your problem. Otherwise, it could be a bad optical drive. Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Vista Home Premiun Device Manager does not display my CD-ROM/DVD-ROM drive

  I recently tried to use my CD-ROM/DVD-ROM drive and it did not work. It was working fine a few days previously but now... Nothing.

  My first reaction was to open Windows Explorer, expand and look at computer. There was my C drive and the recovery Partition but no Opitical drive more.
  Then I opened the Device Manager and saw that the CD was registered it is more as well?

  My question is

  Vista automatically removes the CD-ROM drive in the list of Device Manager if there is a problem with the drive itself?

  Or is there something that happened this suppression the CD-ROM in Device Manager list and it is not a problem with the drive itself?

  I had a disc go bad before on a PC running Windows 98 and 2000, but the disc stayed in the Manager list but I'm pretty new to Vista and know things are very different. So before we get in panic Mode, I thought that it would be a good idea to ask where someone will know probably for sure.

  Thanks in advance for clues

  Len

  Hello

  1st try a restore of the system if you have a point of return before it happened.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -----------------------------------

  If no joy:

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.