DVD - rom is not recognized by windows xp Device Manager

Similar Questions

• My WebCam Studio H.D 1080 p is not recognized by Windows Live Device Manager?

  Lately, I have installed Microsoft Studio Webcam H.D 1080 p. However, there are pop up messages saying that your LifeCam is not recognized by Windows Live Device Manager and load it down.  That's why I can't use IM, Vedio call etc. The pilot is the most recent.  Could you please identify the problem and fix it if tha I can't deal with the problem?

  Hello

  ·         Have you installed latest LifeCam Studio Firmware update?

  ·         What is the exact error message?

  ·         Were there recent changes made on the computer before the show?

  Follow these methods and check if that helps.

  Method 1:

   

  Run the Microsoft fixit tool and check if that helps.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

   

  I suggest you to uninstall the drivers from the Device Manager and reinstall the latest drivers and software for webcam on the Microsoft site and check if it helps.

  http://www.Microsoft.com/hardware/en-us/p/LifeCam-Studio#support

   

   

  Method 3:

  Follow the steps in the article, and check if that helps.

  With the help of your LifeCam with Microsoft Live Messenger

  http://support.Microsoft.com/kb/921332

  See also:

  Support for Microsoft mouse, keyboards, LifeChat, LifeCam & more

  http://support.Microsoft.com/ph/7746

• CD/DVD drive is not recognized by Windows or other programs. HP Pavilion s7310n Slimline PC

  He used to work. It comes from when the computer was around the age of 4 months. should have put in, but could not take the days off to bring it back to BEST BUY - 2 years ago.

  Then... the CD/DVD drive is not recognized by Windows or other programs. If I insert a CD as Photo Suite III or any what CD/DVD, the green light comes on but no rotation and not even a warning to error.

  Now what? How can I find out / know the specs of what to look for a replacement/new one... I lost the book in my move to Florida. I have tried all sorts of key word in GOOGLE and I am half blind and tired to be re-directed to sites that have nothing to do with my question.

  Can someone help me please? Thank you. TJ Rev.

  PS... None of the links in the Solution of Sissy2 DIFFICULTY to where they are supposed to. I don't think it's my problem anyway.

  MY CD/DVD drive is dead.

  Message edited by aalienlady on 05/21/2009 21:32
  Message edited by aalienlady on 05/21/2009 21:32

  Download XP_CD-DVD - Fix.zip and save this file on your hard drive. Navigate to where you saved it, and double-click the file to extract the content. Find the EXE file that you extracted and double click it.  A confirmation dialog box appears when the script is done.  You may need to reboot for the change to take effect. Works on XP and Vista. Good luck!

• External CD/DVD RW drive not recognized by Windows XP

  Original title: Professional. Have an advantage humbucker 16 X 8 DVD/CD RW & ATi Radeon 9550 AGP 250 M for video and VGA that is not recognized

  Have a double microphone 16 X 8 DVD/CD RW advantage which is not recognized by XP Professional.  Also have a CD unit and when windows installs the drivers - it gives them both the same driver.  DVD RW is only recognized as a CD! Have used Microsoft fixit and he says everything is fine. -It uses the same driver for CD and DVD RW units.

  Have also an ATi Radeon 9550 AGP 250 M for the video and VGA and Windows XP does not - have question marks for them in Device Manager.  Microsoft fixit - did fix this problem.

  Have deleted the drivers and tried to control the computer for downloads by Microsoft and it can't find them - if I do a check for hardware changes, he finds only those who do not work properly and that don't work at all, as indicated above.

  Also went on the Microsoft Web site and cannot find a solution it - clicked on links with any help that I could see.

  Sorry for the problem - just fusterated

  LF

  Hello

  To work around this problem in Microsoft Windows XP, follow these steps:

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article http://support.microsoft.com/kb/322756

  Step 1: Remove the registry entries modified. To do this, follow these steps:

  a. Click Start, click Run, type regedit and then click OK.

  (b) in the navigation pane, search for, and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  (c) in the right pane, click UpperFilters.

  d. in the Edit menu, click on delete.

  e. When you are prompted to confirm the deletion, click Yes.

  f. in the right pane, click LowerFilters.

  g. in the Edit menu, click on delete.

  h. When you are prompted to confirm the deletion, click Yes.

  i. exit the registry editor.

  j. restart the computer.

  Note: If you notice a loss of functionality in a particular program as in the CD recording software after you remove registry UpperFilters and LowerFilters values, reinstall this software. If this problem continues, contact the supplier of software to help.

  Step 2: Remove the existing drivers. To do this, follow these steps:

  a. Click Start and then click Control Panel.

  b. If the control panel is in category view, click performance and Maintenance and then click System.

  c. If the control panel is in Classic view, double-click System.

  d. click the Hardware tab, and then click Device Manager.

  e. expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.

  f. When you are prompted to confirm that you want to remove the device, click OK.

  g. restart the computer.

  Note: after you restart your computer. the drivers will be automatically installed.

  See: http://support.microsoft.com/kb/982116/en-us

• Satellite A300 - Cd/Dvd drive is not recognized by Windows

  My cd/dvd drive has stopped being recognized by windows (7). I don't know what has caused this because he previously worked and allowed me to install office 2010.
  There seems to be no restore point shown around where he was working.

  Check the Device Manager please.
  Optical disc correctly listed or may be listed as unknown device drive?

• CD DVD ROM IS NOT SHOWING IN WINDOWS 10

  I was recently on the support Web site and I entered my model number of office. He showed the recommended drivers for installation. My cd rom driver will appear if I install the recommended update. Thank you

  TSST TS-H653G 16 X DVD +/-RW SATA HH Firmware Update

  Hi Rdelgado1,

  Probably not. Try this.

  Go to Device Manager. Select the option to show hidden devices. Select, then uninstall all DVD players and all of the IDE ATA/ATAPI controllers. Reboot and everything must be reinstalled.

• Tecra A9 - CD-ROM/DVD-ROM is not recognized - error code 10

  Description:
  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run.
  The problem code is 10.

  Help me, please

  Hello

  What is the status in Device Manager?
  The drive is listed in Windows Explorer?

• DVD ROM disappeared from the computer and VISTA Device Manager

  Hello

  I know there are a lot of discussions on the same topic, but I read everything and still my problem persists.

  I'm pretty sure that the problem occurred after installing iTunes. The DVD ROM is no longer accessible on my laptop. The light flashes and the attempts to start a disk, but then nothing.

  I was in the high register looking for filters and bass to remove (such as published in the number of threads). I found only UpperFilters which I deleted but still nothing. I also tried Microsoft FixIt but does not have the ROM either.

  What to do next? Can anyone help? He began to depress me now.

  Well, I have solved my problem. After trying everything I read and was advised to try.

  I simply unplugged the laptop and handed. Then, I reviewed the reader noticing only so slightly, I could see the silver housing of the reader. So I applied a bit of pressure, pushing the player to the laptop so that I could see is no longer the silver case.

  I have not for a minute think that might be the problem. Once the laptop is started, Windows immediately installed the driver and open computer it was. DVD ROM restored.

  Not sure if this may help someone of you guys, but if I post my "fix" :-)

• Drive DVD-ROM 37 error message Code in the Device Manager on Satellite M30

  Hello

  I'm new to this forum and I wonder if anyone can help? I have a Satellite installed 30-106 M which has the above CD. At present, it does not work when I go to Device Manager, the error massage that I have is that follow 'Windows cannot initialize the device of this hardware driver. (Code 37) ».

  Can someone offer me some advice please.
  Thank you
  Trevor

  Hello

  I studied in the Microsoft Knowledge base, and it seems that this error is displayed because the driver returned error in her routine to the driver entry.
  I think that you need to uninstall the driver, and then click find the hardware changes to reinstall or upgrade the driver.

  You can do it in Device Manager. Otherwise, you can remove the drive in the Device Manager list and after restart of the new mobile operating system should recognize the drive again.
  After this procedure, you should test the device if it will work.

• Re: CD/DVD drive is not recognized correctly on my Equium P200

  I recently bought a laptop P200D and now, I found that the CD/DVD drive is not recognized.

  In Device Manager the drive icon has a yellow on exclamation and in the wealthy area it says "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  I tried uninstalling the drive and then to restart the laptop but it is has not been successful. I recently downloaded and installed the Service Pack 1 for Vista and I have read that there have been problems with device drivers and wonder if there is such a body?

  Are there updated drivers available for this device?

  Thanks for any help you can give.

  Lester Mortimore

  Hello

  Check this thread http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=113742 please

  I hope this will help you.

• Bay DVD replace HARD drive not recognized by Windows

  I have a 7737 with the 256 GB SSD, but I wanted more storage internally and was not too annoyed to have DVD - so I bought a caddy and replaced the optical drive with a WD Scorpio Black 750 GB drive.

  When I went into administration - computer management - disk management tools, he acknowledged that the drive was there because he told me that he needed reprogramming - so I went ahead and let him. The disc quickly disappeared from the list, and I can't do anything that he can come back.

  I tried to refresh, rescan the drives, restart (how can I confirm the BIOS recognizes the drive correctly, as the "SATA ODD', but Windows still refuses to acknowledge that he is here.) Device Manager displays only the SSD and scanning for hardware changes have no effect.

  Maybe it's a coincidence, but now my laptop seems a touch slow, especially in the graphics... and I noticed that in the Task Manager, System interrupts now takes 10 percent of time CPU on average. I can't say that I've never noticed that before. My old Samsung laptop (which has integrated graphics rather than a dedicated card, to be honest) claims system interrupts doesn't take any time at all CPU. This seems to suggest a conflict any exist, and maybe that's why the drive is not recognized?

  Because Device Manager is not see it, I can't check for updated drivers.

  Because disk management can't see, I can't format / partition / assign a drive letter.

  The BIOS does not let me do anything with the drive, go into properties or disable / re-enable, or something like that.

  Can anyone suggest what I might have missed in the configuration, or what I can do to fix this?

  Thanks in advance.

  Unfortunately, I can't find a downloadable diagnosis for your laptop. Try Seatools. Seagate website has a download, that you can use to create a CD bootable or flash player to test hard drives.

  I just want to see if a tool outside Windows can detect the drive and all the problems.

• Yet another DVD-ROM does not

  Hello

  I also have another DVD-ROM doesn't work is no problem. The drive used to work fine until I installed a second drive, replace my CD burner by an engraver of DVD - RAM. The second works very well. I'm used to debug hardware issues but was just lazy for a few months. Today, I put a lot of time to test, read the Forum etc. No luck. My system is a Dimension 8400/Win XP and not work drive is HL-DT-ST DVD - ROM GDR8163B.

  No errors in Device Manager. The drive just keeps asking to insert a disc. Any type of disc does work (audio, cd or dvd), but they work very well with the DVD - RAM drive. Here's what I've done:

  1. Uninstall all of the software (with Add/Remove Programs Win) associated with CD - DVD (Nero, InCD, PowerDVD7, producer of energy, to things, I got with the DVD-RAM).
  2. Tried the first simple ideas found on the forum. Uninstall DVD driver and IDE controller and remove all keys filters upper and lower in the register (as you see below redbook remains). Delete all errors in the registry with CCleaner three times, until there was no error on the left. I noticed there are still entries in the registry for software that I removed (whole folder of Cyberlink stuff is still there). Have you not tried to erase that. An example of windows efficiency unsinstalling of things. You get not just on a Mac. Oops sorry for this comment. Maybe it's the best solution. Buy a Mac, put the DVD-ROM and it should work fine... ; >). I used to do the Mac support and installation of a few years back... Anyway.
  3. Unplug the DVD-RAM drive to keep only the no work in the car.
  4. Do the first four steps of this page: http://www.dellcommunity.com/supportforums/board/message?board.id=dim_cdrom&thread.id=138730
  5. Reconnect the DVD-RAM to run Dell diagnostics from the utility CD (I don't have the utility partition because the main hard drive has been replaced). From the DVD - ROM drive self-test. Seek and reading tests just asked to put a disc in the drive, I tried several times. Like in Windows, nothing is known.
  6. Finally, I even tried to remove redbook.sys file drivers, reboot, Windows successor but the DVD-ROM is not working.

  Now, the only thing I can think is to try the drive in another computer. I'll try that, if I can find a friend who let me open his PC.

  Any other suggestions?

  ----------------------------------------------------
  Filter load order of driver http://www.bustrace.com
  ----------------------------------------------------

  Upper device filter: redbook
  Subject Device: HL-DT-ST DVD-ROM GDR8163B
  The lower filter drivers: no filter drivers lower specified for this device

  Driver name: redbook.sys
  File location: c:\windows\system32\drivers
  Description of the file: Red Book audio filter driver
  File version: 5.1.2600.5512 (xpsp.080413 - 2108) [5.1.2600.5512]
  Product name: Microsoft® Windows® operating system
  Product version: 5.1.2600.5512 [5.1.2600.5512]
  Legal name: Microsoft Corporation

  Message edited by Gib123 on 01/06/2008 18:28
  
  

• Problem with DVD player and get the error code 19 Device Manager

  Original title: TSSTcorp CDDVDW SH - 224DB ATA device

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  How to fix it please Message Please please how to fix it

  Hi Emerald,

  Please contact Microsoft Community. I understand that you have a problem with the CD\DVD drive and get the error code 19 Device Manager. I've surely you will help solve this problem.

  To better understand the issue, I would like to know if you have any recent software or hardware on the computer changes before this problem?

  This problem might have occurred because of these reasons:

  1. Install or uninstall the CD or DVD recording programs.
  2. Uninstall Microsoft Digital Image.

  Try the steps listed here and see if it helps:

  I suggest you try the procedure described in article which will correct corrupted registry entries. Check if it helps.

  Your CD-ROM or DVD drive is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060/en-us

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information on how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• How can I fix my CD-ROM drive or a DVD drive that is not recognized by Windows or other programs, so I can't play or access a CD or a DVD.

  How can I fix my CD-ROM drive or a DVD drive that is not recognized by Windows or other programs, so I can't play or access a CD or a DVD. Sometimes, when I click on one of the disks that it opens, but the page for the drive is empty. It also says to insert a disk, sometimes when there is a disc in the drive. How this can be fixed.

  Hi vtdubu,

  ·         Did you do changes on the computer before the show?

  Follow the steps in the article.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

• Pavilion p6744y: HP Pavilion p6744y DVD-ROM does not not after installing Windows 10.

  I have recently installed Windows 10 on my Pavilion p6744y. Since installation, the DVD-ROM does not work correctly. This worked perfectly before the upgrade of the OS and is the original drive installed by the manufacturer.

  Spin discs and the light flashes, but there is no response from the computer. DVD - ROM does not appear in Device Manager and has been confirmed as "ENABLED" in the BIOS Setup screen. All wires and cables are attached and tight.

  The HP Support Assistant is installed and confirms that all the drivers and software are up-to-date, like Windows Update.

  Microsoft contacted for support and remote access to the PC. They have attempted to install an updated driver, but have been unable to find newer and easier to apply than the drivers already installed drivers. They were unable to solve the problem and advised me to contact HP. Contact HP is not useful because the PC is out of warranty and they expect me to pay for the support.

  Help, please. I suspect all that I need is a updated driver to make the DVD - ROM communicable with 10 visible Windows.

  I know a little about this stuff, but I'm certainly not a computer "guru". Please keep the simple resposnes with easy to understand by a layman terms.

  Thanks for your help!

  I FOUND A SOLUTION!

  Research in the blogs of support paid off in a big way. A minor registry editing is all it took, and my player works like new!

  Here is the solution. My system is Windows 64-bit 10.

  Resolution 5: Create a registry subkey
  Note to use this method, you must be logged on to Windows as an administrator. If you need help, check that you are an administrator, go tohttp://support.microsoft.com/gp/admin
  Important follow the steps described in this section carefully. Serious problems can occur if you modify the registry incorrectly. Before you edit, back up the registry to restore in case of problems.
  To create the registry subkey, follow these steps:
  Press the Windows logo key + R to open the run. (or right click on the windows down icon to the left)
  Type regedit in the run box, and then press ENTER. If you are prompted for an administrator password or a confirmation, type the password, or click on allow
  In the navigation pane, locate the following registry subkey:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\atapi
  Right-click atapi, point to new, and then click key.
  Type Controller0 and press ENTER.
  Right-click Controller0, point to new, and then click DWORD(32-bit) value.
  Type EnumDevice1 and press ENTER.
  Right-click EnumDevice1, click on change...
  Type 1 in the value data box, and then click OK.
  Exit Registry Editor.