DVD ROM is not working on Satellite P300

Similar Questions

• CD-ROM/DVD-ROM would not work on Satellite L30 - 11 d

  Hello

  I have a rug * a UJ-85 OS ATA device on my Satellite L30 - 11 d.
  When I put in a disc it does not recognize.
  I looked at the Device Manager and it says

  a? Could not load the driver for this hardware. Driver may be corrupted or missing (Code39) a?

  How can I solve this problem?

  Hello

  Today, he's your guy lucky day ;)

  This error is known to me and I have the solution!

  Microsoft has published an article of very useful knowledge base that could help solve this problem.
  http://support.Microsoft.com/kb/314060/

  It seems that the registry entries are corrupted and it should be cleaned.

  Then take a look at the documentation provided and try the proposals MS

  Good luck

• My CD-ROM/DVD-ROM does not work

  My CD-ROM/DVD-ROM does not work.  Manager of devices display a "!" on the Optiarc DVD RW AD - 756 A ATA DEVICE.
  1 device state poster (this device cannot start. (code 10)).
  2 update driver... shows that the best device driver software is already installed.
  3. it is the driver of manufacturing.
  4. I tried the microsoft fix it downloads and it has not solved the problem.

  Hope that enough information... Oh, my computer is computer laptop HP Pavilion G60-231Wm.

  Grateful for any advice...

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• My Sony Vaio E Series model VPCEB32FM CD/DVD ROM is not working or projection upward. Please notify

  My Sony Vaio E Series model VPCEB32FM CD/DVD ROM is not working or projection upward. Please notify

  I tried to remove and reconnect.  I tried to look in the Device Manager.  I tried the patch Microsoft Fixit. None have seemed to work.

  What are some solutions.

  Thanks in advance

  cmczona,

  Did you try to apply this difficulty? If you have, and it still doesn't show, try to start it.  Make sure that you have a bootable disk and make sure it is set to boot from the optical drive in the BIOS first.  If you can't then it's a hardware problem and the player or another material is defective...

• I have a computer running VISTA. The CD-ROM/DVD-rom does not work and can not read the CD of the program that I placed in it.

  It won't read a DVD.  It will not read ANY CD or DVD.  I tried 12 different CD/DVD.  This isn't an upgrade to Vista; the computer came "made for Vista" with Vista installed on it.  I had added Nero.  I removed Nero.  I did all the updates. I have not released the driver and reinstalled.  He claims to have the latest driver software, but it won't work.  The computer can see the CD/DVD, but he calls it a 'CDROM '.  It is not the case.  It is a DVD/Cd-RW with Labelflash.

  I did everything suggested that past discussions.  I ran FIXIT program that claims that the drive works properly.  It is not the case.

  I tried to get various programs to recognize.  They cannot see the installed media.

  I uninstalled iTunes.

  Please do not give me the answer of cut-and - paste stock; It does not work.

  Please tell me what to do to make Vista see the media inserted in the CD/DVD-RW drive.

  Thank you.

  Hello

  Well, if you have tried all the usual bugs try this:

  Make a Restore Point:

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  ------------------------------------------------

  Then go to right click on UNINSTALL - - CD/DVD - Device Manager CHECK THE DRIVERS to REMOVE and
  continue.

  Reset.

  Occasionally, install an upgrade or a re - install will fix the problem and of course the drive or other hardware issues
  could be at stake.

  =====================================

  Here's the answer, just in case there is something you don't have, and I start up and down.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable
  or slight corrosion on the contacts (usually for a laptop) and other issues.
  

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===========================================

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Satellite U200: DVD - ROM does not work correctly

  DVD - ROM not working. After the fire of two optical drive DVD - RW, loss of ability to burn and can read only CD with difficulties of the sum. It is not possible to recovery operating system.

  Look like lost laser precise positioning device and can no longer read high-density data on DVD, but on the sum of CD singing can be found with difficulty.

  Your description sounds like a reader lens problem.
  Probably the lens can not calibrate in the right position, and that's why the drive can't handle DVD media.

  Bad news buddy this problem is not repairable with updates. Above all it s a hardware problem and the drive should be replaced!

  I would recommend contact the ASP which is responsible for you country to organise a replacement.

  Good bye

• Satellite A200 - HD DVD ROM is not working

  Hello

  Can someone give me advice what to do with my HD DVD ROM It's playback discs after departure upward but then if I don't play anything for a while (30 minutes or 1 hour) and then try to play HD DVD ROM stopped reading anything and the laptop became frozen. Sometimes it even stops with the error message.

  If I restart my computer then HD DVD ROM still works but for a short time.

  What should I do?

  Kind regards
  Olga

  You have cd/dvd utilities in the system tray? Maybe they are causing a problem.

  Try to remove the CD/DVD filters in the registry.
  When the associated CD/DVD (such as iTunes, Nero, virtual CD software), the software is installed, they install filters in the registry, which can cause compatibility problems.

  (1) run Regedit (start-> Run-> Regedit)
  2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  If your CD/DVD programs stop working, you will need to reinstall them (preferably with an updated version).

  This utility can remove the filters for you:
  http://www.CSD.Toshiba.com/content/support/bulletins/su2065061/RmvFltrs.exe

• 1805 - S154: DVD - ROM is not working properly.

  I have a toshiba satellite 1805-S154, and I just started to use it again. The dvd - rom is more will play DVD, it will run CD but whenever I put in a dvd - rom, nothing, it will not read the disc. Anyone know why this happens and how how can I solve this problem?
  Thank you.

  Hello

  Well, have you tried to remove the DVD drive of the device?
  You must remove the drive from Device Manager. After the restart of the unit of the OS will recognize the DVD player again. Perhaps this procedure will help you fix this strange problem.

  Good bye

• Why Toshiba Media Controller does not work on Satellite P300?

  Why not Toshiba Media Controller works on my Toshiba Satellite P300?

  First of all, to know what means this feature:
  What is the Toshiba media (TMC) controller and what is the TMC plug-in?

  http://APS2.toshiba-tro.de/KB0/FAQ0702YO0000R01.htm

  Here are also a few details:
  http://us.Toshiba.com/computers/research-center/technology-guides/Toshiba-media-controller-software

  I recommend reinstall this software again.

• Recovery DVD creation does not work on Satellite L500-1UR

  Hello

  on my Satellite L500-1UR this two DVD that I created and the Windows 7 Home premium 32-bit with the PC do not work...
  In both cases, the restore process seems to work fine but the phase of finishng never ends... Start, restart, rereboot... and so on.

  Resettlement using a 'standard' Windows 7 32 bit seems to work... but... I'm afraid that I might have lost something.

  How to get the DVD of "correct"?
  Thanks for help

  Hello

  Please check if you can create the recovery discs using another DVD from different manufacturers.
  I had the same problem in the past. I've tested some Verbatim DVD R TDK and could create the recovery DVDs.

  Welcome them

• Equium A100-299-CD/DVD-ROM does not work

  My CD/DVD-ROM on my Toshiba Equium A100-299 won't work, do you have any idea why?

  I tried to fix it by changing the IDE secondary channel IDE ATA/ATAPI in PIO Mode only, but it doesn't seem to work...

  I get famous I I/O-warning, whenever I try to open programs and DVDs on it. But it works when I put an audio cd...

  Hello

  If all goes well it s not a malfunction of the equipment.
  We should be optimistic ;)

  Check this box: go to the Device Manager and remove the drive from the device.
  After restarting again, the operating system should recognize and initialize the disk again.

  In addition, you can try to clean the lens gently and carefully, maybe it helps

• DVD drive does not work on Satellite A200-1 s 5

  After the installation of vista dvd unit is not reading any disk until you restart. To be more precise, from the first moment, I bought the laptop, I try to install ms works disk, but the device did not read.
  I have observed that if the disk was in the unit until the operating system has started the unit has been reading the disc. If I opened the dvd unit and I close the unit (with the same drive inside) I get the message to insert a floppy disk in the drive and the message remained until I restart the operating system.

  I tried to restore the operating system with the DVD, it came to pass, but after installation I had the same problem. I tried with another operating system, windows XP, with all the drivers installed (BIOS included) and the problem still remains. The laptop works fine except the dvd player.

  Can someone help me please?

  Hello

  a suggestion that could avoid sending the machine to a repair center would be to check the download site Drivers Toshiba for an update of the "firmware" for your drive. If no one is available, or the firmware does not solve the problem then you definitely need to send the machine to an authorized service partner because it could really be a hardware failure.

  If you need a link to find the nearest service partner in your country, then you must click [HERE: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_whitepaper.jsp?service=EU&WHITEPAPER_ID=0 000000871] and phone an ASP for a chckup/repair of the material that is closest to you.

  Welcome them

• My CD-writer/DVD-rom does not work and the door does not open

  I tried Device Manager and that will not be the same work, I disabled the drive once I discovered it did not work.  I have a Compaq presario XP sp3 with Internet Exporer 8 is possible that I can go back to IE 7?

  I tried Device Manager and that will not be the same work, I disabled the drive once I discovered it did not work.  I have a Compaq presario XP sp3 with Internet Exporer 8 is possible that I can go back to IE 7?

  Hey Craftslady2011

  Read below how to open the cd with a paper clip tray

  http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

  How to uninstall ie8 at the link below

  http://support.Microsoft.com/kb/957700

  and reading this on cd XP problems

  This article explains how to solve common problems that may occur when a Windows XP-based computer cannot read a CD or a DVD in a CD or DVD drive. This article contains several methods that you can use to try to solve these problems, and it also includes some advanced troubleshooting steps

  http://support.Microsoft.com/kb/321641

  Here is the vista forums

  for xp questions use the link below to the xp forums

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=4

  Walter, the time zone traveller

• DVD Rom does not work in the Dimension 2400

  I have a Dell Dimension 2400, operating on Windows XP service pack 3, him comes from the computer with a CD burner and I need to install a DVD player, so I bought a HL-DT-ST-DVD-Rom GDR8163B, I installed the DVD and the computer recognizes the DVD-ROM and device manager says it works fine.

  When I try to use the DVD to play DVDs or CDs, it starts to run, but slow, then after a few seconds it stops, if I go to my computer, the drive is there and if I click the icon it says insert the floppy, puppy little drive upward and then stops.

  I had also installed on this computer Sonic Record now Version 7, I removed that thought it might be in conflict, but no help.

  I tried the fix for WIndows to delete the upper and lower limits

  I was also told that the computer is old and she might need a firmware update or something?

  Can anyone help?

  Osprey, you reason the drive was bad, I went and picked up another drive today and it works great, thanks for all your help.

• Satellite A300-243: CD/DVD-ROM does not work after installing Win 7

  Good day to all!

  I have a huge problem with my CD/DVD room.
  I've updated my A300-243 Satellite with windows 7 and now I can't burn DVDs, CDs, the DVRW.

  But when I had Windows Vista everything was normal. What should I do?

  Post edited by: Qualy

  Hello

  I'm not sure if this will help but try this:
  Go to Device Manager and remove the drive from the list of devices CD/DVD.

  Then beginning of the registry (regedit.exe) and delete the Upperfilters and Lowerfilters completely from the following registry key values:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  After this reboot of the laptop.