DVD - rom on Satellite L30 does not work

Similar Questions

• CD/DVD ROM shows disabled and does not work under Vista

  My CD or DVD drive is not reading or writing and is indicated as being disabled, how can I enable them again?

  * original title - my CD or DVD drive does not read or write and is shown as being disabled, how can I enable them again? *

  http://support.Microsoft.com/kb/982116/en-AU

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite pro 6100: DVD - ROM SD - 2612 C does not work properly

  Hello!

  The image flashes with the ordinary WinDVD.
  When I install the interactual Player 2.7 real. (I was very happy with version 2.0 on my old toshiba laptop for win98), the same phenomenon occurs, too - but there is no sound at all...

  Interesting fact: DREAMWORKS Animation Film "Over the hedge" works without problem screen at all, but: no sound...

  does anyone have an idea?

  A download?

  Thank you!

  Hello

  Have you tested WinDVD player with several different original DVD movies?
  Check it!

  You should also test different DVD player. I recommend VLC Player. It's free!

• Bluetooth on Satellite L500 does not work!

  Hey well im disappointing defetly of Pentecost suport of toshiba, they never anwser mi email, and when I call for the support that they did not fix the problem mi! After 2 monthas waiting they never remember!

  My Bluetooth on Satellite L500 does not work! I have upgraded from vista to 7 suport said that I probably had to put the Vista pc again to install the bluetooth, and upgrading them to 7. IM whit vista of Pentecost after using the restore cd.

  After that I read some post and install the drives still does not work!

  I try to install bluetooth monitor, then the battery Bt when battery is installing wask me to activate the bluetooth I use Fn + F8 and the battery does not install it!

  Any tips?

  Just do so for sure:
  You have enabled your wireless switch?

• Sony DVD RW DW - Q85A Driver does not work

  We have a relatively old Sony Vaio (VGN-FS485B) with Windows XP operating system.  The topic CD/DVD driver (RW-DW-Q85A) does not work and the State of the specified device is the following: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ».  Unable to overcome difficulties following procedure of Troubleshooting Device Manager.

  Grateful for any advice.

  This article can help...

  http://support.Microsoft.com/kb/314060

  Tricky

• USB ports, CD/DVD player, and Mike just does not work

  So I'm pretty sure that these things are happening at the same time, although there are risks my trying to troubleshoot the USB ports have contributed to the failure of the microphone (internal and will not capture sound) and cd/dvd drive (not open). Perhaps? It is true that I know little about these kinds of things, but I'm much less following the indications which is what I did to try to tackle the problem of USB port, which was the first I noticed. I followed all the advice I could find online for troubleshooting when all usb ports do not respond. I used Device Manager to disable in its regular and safe mode. I also uninstalled them all in both modes (even if they reinstall until I'm able to restart). I unplugged and wait 5, 10, 15 min etc. There was a difficulty mentioned about watching the. Mine and INF files do not contain the mentioned error. I'm tempted to all my files backup and restore the computer to factory settings, especially now that the CD/DVD player and the micro does not work. This would solve the problem? If these things are related? Could even restore settings because I can't have in the cd/dvd drive? It's a dell inspiron 1721, and it crushed while you restart for almost a whole day just all the time I've began to notice all these malfunctions. I really appreciate any guidance!

  Good so I solved all of these problems. I don't know what did the trick, but when I went back in the BIOS to re - activate the ports they have worked!

• DVD - ROM Toshiba Recovery disk does not start

  Hello

  I'm having some problems with my Toshiba Satellite M40, and I decided to reinstall the OS with the recovery of the dvd disk, but the disk does not start.
  When I'm on windows, the cd/dvd driver works perfectly, and I don't think that the recovery of the dvd disk are damaged.
  I have already tried:
  1. by pressing the "C" key to start the computer
  2 - press "F12".
  3 - Enter the BIOS Setup and select cd-rom to start first

  But the computer starts up normally and no error message appears

  Can someone help me? I don't know what to do

  Thank you

  Hello Palma

  Can you please test it with some other bootable CD or DVD? It will be interesting to know if this happens with the recovery media only or even with other bootable media.

• Satellite M70 does not work properly with external monitors

  Hello

  My Satellite M70 has problems with a couple of monitors and projectors.

  When I connect to another manufacturer (model AL1721) monitor, the screen remains black, if I connect to another monitor manufacturers (model AL1716) everything works fine.
  If I connect a projector there also is a black screen.

  At first everything worked fine, I had a monitor AL1721 who worked, and 1 day it no longer works. I reinstalled windows, updated video card drivers, but it still does not work.
  anyone an idea why?

  Hello

  How do you connect the monitors and the projector? with an analog or a digital (with adapter) cable to the screen?

  Another question: when you connect your AL1721/Beamer and turn on the machine, you can see the Toshiba logo or something else. Is the error just that occur in windows or the "DOS" screen, too?

  BTW. have you reinstalled with recovery or separated from an original disc of Microsoft windows and the drivers you have installed?

  Questions about the question that could be answered by your help me to help you. ;)

  Welcome them

• My Satellite touchpad does not work

  Hi all

  I bought my Toshiba satellite i5 on 2010-12-26. Unfortunately, he was arrested while working on 02/05/11.
  I went to the repair center and they checked my laptop and said hard drive has been corrupted.
  They took 12 days to fix my laptop.

  I got my phone on Friday and Saturday, its mouse pad does not work.

  Could you please tell what should I do now?

  Thank you
  Concerning

  Mehdi

  Hello

  The touchpad is probably just disabled and so he doesn t work

  Have you tried FN + F9 key combination? With this combination of keys you can enable/disable the touchpad, so I would like to test this.

  If this is not the case, try to reinstall the driver for the touchpad. You can download it from the Web from Toshiba site :)

• My Satellite A10 does not work

  I have a problem for my Satellite A10-S440. When I turn on it, it does not work and the DC seeing flashes orange (blinking).

  Could you help me? Thank you very much for your help.

  Good luck.

  Hello

  Try to remove the battery for a while. After plug in the battery try to start the device without the AC adapter.
  Also, try to start the laptop without battery with the AC adapter / CC.
  If the procedures don't work so I guess there is something wrong with the power supply electronics. In this case, the best way is to ask the service to help.

  Good bye

• driver DVD update and there but does not work

  My HP laptop DVD player does not work properly. When I try to update the driver, it does state that it is updated and currently, but it will not allow the DVD player function. When I check the peripheral material, it gives an error CODE 19.  It says that the drivers do not work properly.  I tried to allow the installation of HP Assistant driver and everything imaginable but nothing helps.

  It ends up being a higher filter problem in the registry to have two software for DVD.  It's corrected now.

• my dvd +-rw dh-16a6s plds does not work

  What makes code 10 average problems with my DVD my hard-rive im he won't play any of my DVD can help u

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Backslash Key on Satellite P10 does not work

  Hello

  The backslash on my P10 804 button does not work, its certainly not a question of OS. I think it may have something to do with the bios or the firmware of the keyboard on the machine?

  Y at - it a master keyboard / known firmware issue?

  Kind regards
  Sean

  Hello

  What do you mean by not work?
  Do you have strange signs or anything?
  Maybe you have the wrong keyboard language settings or bar button jams backslash or the key is dead.

• L830 satellite - Touchpad does not work

  Hello

  I have a 16W L830 I bought less than a month ago. Meanwhile, I had a catalog of problems (it crashes 3 - 4 times a day; it took 2 days to install MS Office; etc.).

  For now I'll stick to the more immediately pressing problem: the touchpad stopped working - again. This happened twice before; both times I did a restore of the system for the next day, and that solved the problem.

  Today, however, the restoration of the system did nothing to help with the problem of touch pad. I also tried to repair/upgrade to update driver, but my device manager make sure the driver is up to date and works very well. I tried to re - download the driver from Synaptics site and restart my computer, but it does not work either. It is on the edge of my technical knowledge, so now I'm stumped.

  As you can probably hear I'm pretty fed up with the machine in general and seriously plans to return. It would be good to set the touchpad, at least, I can use it for the next two days, until I have the chance to take in the store.

  Any help you can give would be really appreciated! Thank you
  C

  Hello

  Before the recovery of the laptop, check if the touchpad isn't disabled.
  This should be verified by using the function Fn + F5 (or only F5) button
  In addition you should go to BIOS (F2) and must check if the pointing device is enabled (BIOS-> Advanced-> system-> pointing device Configuration)

  In the case where it would not help, recover the laptop

• 1670 CDS satellite - modem does not work on Windows 2000

  Hi-

  I removed the Toshiba W98SE and installed Win 2000 (new installation). I managed to put it on the audio driver using downloads on your website (and it works).

  I do a test on the dial installation upward and that you have installed the modem also since your website (Conexant Soft K56 Data, Fax PCI Modem). This is intended for W98SE but microsoft message is

  The port looks ok. Please advise - is it the right driver?

  Thank you.

  A Windows 98 driver does not work on Windows 2000. Therefore, you need a new driver for Windows 2000.

  I have checked the Toshiba site but your model no available Windows 2000 driver exists.
  I think you have to search the site of the factory of the modem. Maybe you can find a driver or another portable model that has the same modem.

  Good luck!