DVD RW drive (D :) will not read or write DVDs)

My computer can not read and write DVDs and CDs.  Please tell me how to solve the problems.

Thank you very much!

Sue

Hello

Someone helped me to fix my computer, the problem disappeared.

Thank you very much.

Sue

Tags: Windows

Similar Questions

  • Drive hard will not read or write media

    G ' Day,.

    Been problems the reading and writing of discs in my office a Dell Inspiron530s, running Windows Vista Home Premium 32-bit, with a (TSSTcorp DVD +-RW TS - H653F ATA Device) hard drive
    Insert a disc, the disc will attempt to load the disc, and after about 30 seconds the player will be set automatically opens and instruct me to insert a disc
     
    I tried to delete upper and lower filters in the registry in class editor {4D36E965-E325-11CE-BFC1-08002BE10318, this didn't solve the problem, also updated driver software and have tried to uninstall Drive and restart windows to discover once again, no effect}

    Have already tried Windows Automated Troubleshooting tool http://support.microsoft.com/gp/cd_dvd_drive_problems
    with the following results:

    CD/DVD, reading and writing

    Publisher details

    Problems found

    Media in the CD/DVD drive is not readable (TSSTcorp DVD +-RW TS - H653F ATA Device) Media in the CD/DVD drive is not readable (TSSTcorp DVD +-RW TS - H653F ATA Device)

    The drive is empty or the media format is not supported

    Not fixed

    Insert the decipherable by media

    Successful

    Verified issues

    Class filter drivers are corrupt

    One or more specific class filter drivers are missing/corrupted

    Checked

    Filter of device drivers are corrupt (TSSTcorp DVD +-RW TS - H653F ATA Device)

    One or more device-specific filter drivers are missing/corrupted

    Checked

    Device is not working properly (TSSTcorp DVD +-RW TS - H653F ATA Device)

    This device is faced with a problem that it prevents to function properly

    Checked

    Drive is disabled (TSSTcorp DVD +-RW TS - H653F ATA Device)

    The CD/DVD drive have been disabled in Device Manager

    Checked

    Drive is not assigned a drive letter

    The CD/DVD drive is not accessible via a drive letter assigned

    Checked

    Problems found

    Details of detection

    6

    Media in the CD/DVD drive is not readable (TSSTcorp DVD +-RW TS - H653F ATA Device)

    Not fixed

    The drive is empty or the media format is not supported

    Insert the decipherable by media

    Successful

    Insert a CD or a DVD disc play in the selected CD/DVD drive

    Verified issues

    Details of detection

    6

    Class filter drivers are corrupt

    Checked

    One or more specific class filter drivers are missing/corrupted

    Fix class filter drivers

    Not work

    Remove references to class filter missing/corrupt driver

    6

    Filter of device drivers are corrupt (TSSTcorp DVD +-RW TS - H653F ATA Device)

    Checked

    One or more device-specific filter drivers are missing/corrupted

    Uninstall the device

    Not work

    Uninstall the device problem

    6

    Device is not working properly (TSSTcorp DVD +-RW TS - H653F ATA Device)

    Checked

    This device is faced with a problem that it prevents to function properly

    Rescan devices

    Not work

    Look for changes in available devices

    Uninstall the device

    Not work

    Assign drive letters to all the readers who have no drive letter

    6

    Drive is disabled (TSSTcorp DVD +-RW TS - H653F ATA Device)

    Checked

    The CD/DVD drive have been disabled in Device Manager

    Turn on the device

    Not work

    The device must be activated before it can be used

    6

    Drive is not assigned a drive letter

    Checked

    The CD/DVD drive is not accessible via a drive letter assigned

    Drive letter

    Not work

    Assign drive letters to all the readers who have no drive letter
    _________________________________________
    As you can see that the report informs me that media that I inserted is unreadable, but the media is readable, I tried to many Audio CD that will play perfectly on other computers

    Just for some background information, first sign of trouble with the drive showed while trying to burn a disc on Itunes, with the message
    "The attempt to burn the disc down, an unknown error occurred (4280)."
    Since then the player dropped only Hill, in its current state, not reading anything

    I have my suspicions that the optics in the drive can be turned, and it must be replaced, but id rather know for sure before I'll come and will makes

    Any advice or solutions would be greatly appreciated
    Thank you very much for your time
    The Roo

    Hello

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    ================================================================
    ================================================================

    If necessary, you can try an InPlace upgrade/repair Installation which should allow you to keep the
    programs and data backups redundant but are always a good idea.

    On-site upgrade
    http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

    How to perform a repair for Vista Installation
    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

    =============================

    And if nothing else works a new facility can assist and/or replace the CD/DVD drive.

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • CD DVD WILL NOT READ OR WRITE. D: IS NOT ACCESSIBLE DUE TO THE I/O DEVICE ERROR

    Toshiba Satellite A - 105 Windows XP media center management with a MashitaDVD/RAM UJ - 841S drive will not read or write CDs D States is not accessible. Cannot be performed because of an i/o device error. However, I can play movie CD via the media center.

    Does anyone have a solution? Thank you!

    Hello

    ·        Was there no hardware or software changes the system just before this problem?

    Please try to follow link below to solve the problem with the DVD player:

    http://support.Microsoft.com/kb/891894

     

    Note: After a repair in method 2 in the link above, make sure you put the computer to start as usual as shown in method 2 in the above article.

    Hope this information helps you solve the problem. Let us know if it helps.

    Thank you and best regards,

    Ramata Thakur

    Microsoft technical support engineer.

    Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

  • NEC DVD +-RW ND 3650 a unit will not read or write, all diagnoses tried did not work.

    DVD +-RW ND 3650 a unit is not reading or writing to the media. I tried the diagnosis MS-Fix - it, but he could not solve the problem. I am running MS7 Home Premium SP1 (build 7601) on a Deminsion of Dell E520 with 4 GB of RAM with 2.13 Ghz Intel Core 2 Duo processor. I ran MS-Fix - it, but it didn't Fix it. Mgr. said device the device works correctly, it is not. I checked for updated drivers and the drivers are up to date. I checked the internal connections and everthing looks good. Before installing a new optical drive can anyone lead me to a solution?

    Hello

    Don't forget to check the diagnosis with Dell Support, their documentation online, and ask for their
    Forums about known problems. Dell has a few good methods of troubleshooting on their site.

    Dell support
    http://support.Dell.com/

    Dell support drivers - product manual & warranty Info (left side) - and much more
    http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

    Dell forums
    http://en.community.Dell.com/forums/
    =======================================================

    Even if you did some of them before you begin please from the top and work

    down, jump, nothing, until the issue is resolved or these methods have been exhausted.

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    Then run checkdisk (chkdsk).

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    ==========================================================

    After the foregoing:

    References to Vista also apply to Windows 7.

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The DVD player does not work after installing Windows 7
    http://support.Microsoft.com/kb/975270/

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
    Setup after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and the
    correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry settings for your
    CD/DVD drive someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://Club.myce.com/F61/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays
    all devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • CD DVD drive will not read or write

    Hello.  I have a Pavilion 6202 and am running Windows Vista.  For the last two weeks, I was not able to get the DVD CD to play.  I get the following error in the Device Manager: ' (Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39).  Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available.)  Of course, the computer checks a solution, but nothing comes back.  the CD DVD ROM drive is a (TSST Corp CDDVDW TS - H653N Scsi CdRom Device).

    I have limited computer experience.  I tried updating the driver but it says that it is already installed.  Any suggestions would be welcome.

    Thank you.

    Hello Lawrence,.

    Try:

    Remove upper and lower filters

    Step 1:

    Click

    Start > type "regedit" in the search box and then click 'regedit' in the list programs.

  • Combo CDR/DVD SDR2102 drive will not read CDs or DVDs

    Hello

    I have a mobile Ergo Elite 4.
    The hard drive crashed and I bought a new one.
    I have loaded windows XP by using a boot disk but cannot get the Toshiba SDR2102 CDR/DVD combo drive to work. I had to load windows on via USB
    using a USB port.

    I can see the drive in windows Explorer, but it will not read the CD or DVD.
    I looked in the Device Manager, and it came with no warning mark.
    I tried deleteting, re-startup and he's back in the Device Manager.

    I'm trying to find a better driver, but it says that I use the best driver.
    I tried various Web sites using sand everywhere tells me that I do not need a driver for this drive.
    What I do, it seems as if the Combo driver is recognized but it will not be read whatever it is inserted, he said only: insert the disc.

    Does anyone know what I can try? or know where I can get drivers for it or software to test the drive?

    any help would be appreciated. :-(
    Some.

    Hello

    You n t need a special driver for the CD/DVD drive.
    CD/DVD players use the current Microsoft drivers already contained in the Windows operating system.

    In my opinion, you should first test different types of media. Please note that not all CD or DVD s are compatible. Distribute readers can't handle bad quality mediums.

    But we shouldn't t rule out a risk of hardware malfunction.
    Disk failure and you may wish to contact your dealer for a replacement.

  • DVD - rom and DVD - rw read previously written DVDs and CDs but will not read a blank cd or dvd in the drive

    Original title: Dvd rom problem

    Am running windows XP. DVD - rom and DVD - rw read previously written DVDs and CDs but will not read a blank cd or dvd in the drive. Any help out there?

    Hello

    1. When did you start to question?

    2. did you of recent changes on the system?

    3. you receive messages or error codes?

    You can check the following link and try to run the Fixit and check.

    Your CD or DVD drive cannot read or write media

  • My E drive will not read the DVD-RW/DVD-ROM

    So here is the problem
    I have a vista Home premium 32-bit with sp1 computer laptop
    who will not read DVDs or games that are in DVD-ROM format (specifically, the game command andConquer 3: Tiberium Wars)
    but it will read the games more alumni who are PC - CD (such as Command and Conquer: Generals) well it will nt installs successfully

    I tried to clean my computer and reinstall using operaing system came with my laptop drive, but the drive E may not even read that
    the CD turns, stops, turns, makes a strong ' loading ', but stops then
    nothing happenes
    I restart my PC with the CD in there because he says I'm supposed to o, but nothing happens, my restartes just PC normally

    Help, please

    Hello, tyINtrouble

    The device is listed as a DVD player?

    You can check by clicking on start, click computer, and to check the label of the hard drive, he may mention DVD or DVD - RW etc.

    You can also check your connections are secure.

    If possible, you can try to test the drive in another machine, or another drive in your computer to see if it works properly.

    If your hard drive and DVD/CD player are on the same parallel cable connection, it can cause problems as well.

    We can't wait to hear back on your part.

    David
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Optical drive will not read anything else professional films

    So, I am owner of a 2012 MacBook Pro 13 ". The computer comes with Intel Core i7 processor and has the maximum of 8 GB of Ram. The problem is that the optical drive that is built into the computer will read nothing else done professionally movies. It can read disks of movies like the Lord of the rings and Wargames, to name a few, I tested, but it will not read any DVD-R disc or to a CD. I tried the CDs as Metallica music... And Justice for all after try in another computer and a radio and get good results when it just won't play on my Mac.

    I have had this problem in the past , but at the time the optical drive not read anything at all. This occurred in early December and I fixed it on 20 December. To solve the problem, I went to the Apple Store and they can Reset the P - RAM. The Apple guy he told me to make sure to disable every night. I did this because it's what I did in the past. After that, I was able to play any CD or DVD and burn them. I also tested it every two weeks by playing a DVD in there to check that it still works. But I discovered that it was broken again when tried to insert a DVD-R to burn things on it and the computer only it spun and then ejected it. I've known this current problem since around mid-April.

    I did some research on it and what I have read I believe that I must buy a cleaning disc and run it in my optical drive to clean the lens of the eye out, but I don't understand how I am able to read some disks and not others if that is the problem.

    Can I take it again in the Apple Store and get it looked like or should I buy a cleaning disc and run it through my optical drive, and then decide what to do next? I'm in no hurry to get this problem fixed because my guarantee does not expire until the end of July this year.

    I don't know why you want to put some words in BOLD and a few words in normal font. Frankly I find it a bit annoying when someone does something like that, but oh well... what you could do is to try a cleaning disc (the one with little brushes this topic) or a good breath of air compressed. In addition, some brands of DVD - R Virgin do not work as well as others. I found verbatim to be good, maybe maxell or Taiyo Yuden. Your mileage may vary...

    If this still does not work, feel free to zap the pram x 2-3) and do an smc reset. Shut down the computer, plug power adapter, hold down the left shift, control, option, and button works / stop for about 45 seconds, let go of all of them, then press the power button to restart. If none of this works, then by all means to make a genius bar appointment and bring it in to your local Apple store. Hey, if you have an extended warranty, might as well use it, right?

    Good luck

    JB

  • Satellite L30: reader will not read CDs or DVDs

    In the evening, I was recently testing on various operating systems on my laptop and eventually decided to return to Windows Pro.
    It was working fine until a couple of days, but then the hard drive started making a rattling noise, like R/RW head stuck.

    Now it will not read CDs or DVDs, can someone please help and tell me if it's a failure of the software or hardware, and the best way to fix it?

    Hello

    The drive problems are not uncommon and may still occur.
    For the most part the purpose of calibration training does not work correctly.
    The objective must be calibrated in the correct position until the player will read or write to the media.
    This fault is not reperable and especially the drive needs to be replaced!

  • Re: Satellite A210-12U: Mat * a DVD - RAM UJ-8505 will not read discs - error Code 39

    Hello.

    I've had my A210-12U for about five months now, and recently for the past few months I had some problems with the dvd player.

    The thing is that the player will not play all discs, the drive will detect that a disc has been inserted, but it will not read. It happened for about a month but its only recently I really know whats been wrong with it.

    The drive I currently use is a CARPET * A DVD - RAM UJ-8505 ATA

    I scanned the disk for problems with the support toshiba but utility that came with something so I decided to check the drivers.

    Windows Vista gave this Message: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

    I uninstalled the drivers and drivers on there and installed new ones that I downloaded here on the toshiba site.

    What I really want to know is: is this a problem with the drivers? is it a case that the operating system does not detect the hardware? or is this a situation where I should have the disk fixed on its guarantee?

    was soon Dan

    Hello

    Don t worry buddy I put t think that it s a hardware problem. It looks like a corrupted registry entry and it should be solved easily

    Completely remove the Upperfilters and Lowerfilters from the following registry key values:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
    and restart the laptop

    See also this article from the Toshiba FAQ:
    http://APS2.toshiba-tro.de/KB0/TSB7801XL0000R01.htm

    and the Microsoft Knowledge base
    http://support.Microsoft.com/kb/314060/en-us

    Good bye

  • SD-R2312 will not read DVD or CD in Tecra 8100

    My DC - ROM drive (SD-C2302) died. I bought a second hand SD-R2312 indicating various Web sites should work. I installed the connector of the previous disc and put it in the Tecra.
    The Tecra struggled to recognize the drive but remove and reinsert the drive sets. Device Manager recognizes the drive SD-R2312 and reports that it works correctly.
    However, the drive will not read anything. It vibrates far and finally tells me that the disk is not formatted. I tried pressed CDs and DVDs and burn CDs and DVDs (all - R). These are all the discs that can be read on my other machine.
    So, please:
    What can I do to make it work (and where can I get the update of the drive/firmware/BIOS)
    or is this idea a waste of time, in which case, how will I know what CD drives are compatible with the 8100.
    Thanks for any information.

    Hello

    You can find updates on the Toshiba support page
    _eu http://eu.Computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=eu&ID=Support_Homepage

    But as you can not read any disc, I think that your drive is defective.

    Good bye

  • Carpet * a DVD-RAM UJ-820 s will not read the cd rom cd-rom dvd

    OK, I read the other posts on these discs. Mine will play DVD movies and play them. It will not read the dvd ROM CD CD-ROM etc.
    This cannot be a hardware problem, it must be the software should not it?
    Can anyone help?
    Does anyone have information on how to remove these disks of the computer? Im sure I can install a new one myself if I really need to.
    Unfortunately the computer is just out of warranty

    Hi Robert,.

    Unfortunately, your problem sounds like a problem with the hardware with the optical drive. The player itself must be able to refocus its lenses to switch between DVD and CD formats, and also to pass the pressed DVD and DVD burned.

    I suggest you tyre remove the device from the Device Manager Control Panel, then restart your laptop so that the optical drive will be recognized as a new component hardware and Windows will then be re - install with standard drivers etc. If this does not work then it looks like a new drive will be necessary.

    Unfortunately you say not what model of laptop you have (the removal procedure is not the same in all cases), but in general if the car is equipped with in-house it is held in place with one or two screws accessible from the bottom of the laptop that should be removed first, then the optical drive can be slid out of its location.

    Kind regards

  • Satellite A40-231: SD-R6112 will not read the DVDs I burned

    I finally got my DVD burner to work, but now the drive will not read the DVDs I burned, which, of course, defies the point of having a dvd burner in the first place... When I insert my dvd recently burned, "working" light lights and stays on. Same thing happens no matter how many times I take it out and put plug back in, restart my computer, etc... any ideas anyone?

    Hello

    @Magnus:
    Sometimes, CDs and burned DVD cannot be read with no closing sessions of engraving. You should check this option.
    In addition, this burning program did you use?
    I use Nero. Form is the program better combustion and I never had a problem.
    What you need to do is to test several DVDs. not all media work on the disc.

  • My dvd player will not read my disk of Windows 8 Pro upgrade

    Computer laptop Dell Vostro 1500 with XP Professional, my TSSTcorp L632H DVD player will not read my Windows 8 upgrade disk.

    It will read other DVDs. I've updated the firmware.

    The properties of the drive is display type as unknown file system CD player with blue disk image but used space and free space as 0.

    By using Device Manager, when I ask him to fill the volume is the disk CD 0, Type DVD, free media, not applicable Partition Style, capacity, space Unallocate status and placeholder show all 0.

    I also tried to use a separate USB TSSTcorp DVD drive and it will not also read the Windows8 disc.

    My desktop (Windows, 8, 1) DVD drive Asus computer reads the disc of Windows 8, but I can't use it to load Windows 8 on my laptop - or what I can?

    Can I connect my laptop to my desktop to upgrade laptop computer at Windows8 use of the desktop DVD player?

    I managed to copy the disc of Windows 8 on an external hard drive using another laptop that can play the DVD.

    Then I attached the external hard drive to my laptop and run Setup from there and installed Windows 8 to my old laptop to Windows XP...

    Thanks for your suggestion.

Maybe you are looking for

  • HP laptop laptop 15-ac646TX: product key

    10 (64-bit) Windows came pre-installed on my laptop but I'm not able to activate my microsoft office it is requested for the product... key where / how to find my product key in my laptop... ?? Please, guide and help

  • Satellite A200 - 1VG - DVD RW drive does not

    Hi allPls I need help with my laptop. The DVD player on my computer does not work correctly... It reads DVDs and CDs, but when I try to burn CDs or install a new program with a CD he gets like 97% then stops and an error message appears. It is someti

  • Raspberry PI installed correctly on LabVIEW 2014 with LINX 3.0 (yellow warning)

    Hello everyone Well, I create this thread because I can't connect with my RPI with LabView2014, I'll put some different screenshots, as you can see I already install the LINX 3.0 on my computer. My computer sistem -10 64-bit Windows Products already

  • My 'network' is called 'newtork 2'.

    OK I use Win7, and I'm conencted to the Internet via a wireless router. The SSID of the router is 'home-link. After changing a few security settings, I had to enter the new password wireless to reconnect. The network is now displayed in the center of

  • HP Business Inkjet 2800 won't print the PDF on Mac.

    Sometimes my HP Business Inkjet 2800 does not print Mac pdf document. My operating system is OS X 10.5.8. There is no error message. From the beginning things seem to be communicating without doubt. The print queue is "sending data" and then in a sec