DVD RW drive properties window: what "use error correction" average / under Rip options when digital is selected?

I noticed that an option in the Properties window of my Player DVD RW - under "Rip", when "Digital" is selected, there is the possibility to check a box "use error correction. I'm a DJ some of my older CD digital - ripping so I wonder if this option would be a good/bad idea? In terms to ensure the best audio Ripper without glitches or jump?

Hi Alexander,.

Activate the drive error correction means Windows Media can read CDs that contain errors if the option enable error correction is turned on. Error correction looking for points on the CD where it is unable to read and will attempt to read them again. It will not lead to inaccurate burns. This means that for the best PMR, it "use error correction" option must be selected.

Let us know if you have other questions about Windows in the future.

Tags: Windows

Similar Questions

  • Method used by Windows Media Player error correction

    Hello.

    Could someone tell me - in technical terms - that the option "use error correction" in Windows Media Player makes when copying audio CD tracks?

    I would like to make possible more precise PMR using WMP, but the lack of information about the method used by WMP special error correction makes it difficult know when or even if you need to select the option.

    For example, I wonder if the use of error correction could result in a less accurate RIP (for example, if the method used favors estimate on rereads multiples of a CD damaged surface.) Also, for example, assuming that the error correction is always beneficial, I wonder if it is always worth the burden of extra time (for example, tearing a new CD with no surface damage.)

    I am aware that the audio CD support a system of "forward error correction", that is to correct errors code being inserted in the music of the data from the drive. What is the allusion makes WMP error correction? (If Yes, then why don't I have hear occasional noise and click in the .wma file generated when "use error correction" is unchecked?)

    A technical response would be highly appreciated. Thank you.

    Ant

    Hello

    Error correction looking for points on the CD where it is unable to read and will attempt to read them again.

    It will not lead to inaccurate burns.

  • Not find CD/DVD-ROM drive. Windows 8

    Windows 8

    CD player has worked fine up until now, when I get this error message:
    Not found CD/DVD-ROM drive.

    Hello

    You go to this link and click on the Support link?

    http://www.SecuROM.com/message.asp?m=NoDrive

    E-mail address is removed from the privacy *.

    Have you checked with the Compatibility Center and the manufacturer of the system and their forums?
    Eventually the system or the drive is not compatible to Windows 8.

    Rob - SpiritX

  • HP Laserjet Pro 200 M251 color: what makes edges control average under preferences

    My other question has been resolved so quickly, I thought I would ask another

    What does the control edge under preferences?

    Thank you

    Lisa

    page 49 of the guide available here M251UserGuide

  • Cannot access the he DVD drive in Windows Vista. Error: This device cannot start. (Code 10)

    All of a sudden my DVD drive has stopped working. Windows Vista SP2 doesn't see it, but I can see it in the BIOS.
    Error: This device cannot start. (Code 10)
    The driver has the exclamation point. I uninstalled the driver and restarted the PC, but the system does not re - install.
    The exclamation point is up there.

    Help, please

    Thank you

    Hello

    This article can help...

    http://support.Microsoft.com/kb/314060

    Tricky

  • Can I play blu - ray DVD on my PC (Windows XP) using only Windows Media Player 11?

    OS = Windows XP

    Monitor Acer X183H =

    Hello RondoCal,

    You try to play a Bluray disc in your computer DVD player?
    Does your computer have a Bluray player?
    You will need a Bluray player to play Bluray discs. Here are the different DVDs.
    A Bluray player will play two Bluray discs and DVD discs.
    This thread of TechNet explains Bluray playback in Windows 7:
  • Cannot connect to windows live messenger, error is could not close program when you try to download the new version of windows live messenger

    When you try to connect to windows live messenger, I have error message a new version of messenger is available for download. When I select Yes, wat happens in it will not download new version of windows live messenger but it says could not close the programs. Please help me again

    Hello

    Method 1.
    Here's how you can solve this problem:

    a. download the latest version of Windows Live Messenger available onhttp://explore.live.com/windows-live-Messenger-XP

    b. update of Windows XP through Windows Update.

    c. go to "C:\Program Files\Windows Live" and remove the 'Messenger' folder (Note: replace 'C' with your root drive letter)

    d. go to "C:\programdata" (Note: replace 'C' with your root drive letter) and remove Windows Live install and WLInstaller, if you have a

    e. restart the PC.

    f. run the installation program that you downloaded.

    Method 2.
    If the problem persists I recommend you ask your question on the dedicated Windows Live forums.

    Here is the link to the Windows Live Messenger category.
    http://windowslivehelp.com/forums.aspx?ProductID=2

    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Why the 'AccountDetails' window give me only backward, finishing, cancel the options when you try to create a Firefox Sync account and does not allow me to set up complete?

    I'm trying to set up Firefox sync. I go to tools > configure sync.
    The box opens.
    I click on "create a new account. I have complete my account information. The only options I give at the bottom of the box are 'Back', 'End', 'Cancel '. There is no button "next". I click on "Finish" and the box disappears. "Even when I try to click on" Synchronization Options "nothing happens.

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

    • Do NOT click on the reset button on the startup window Mode without failure.
  • My CD-ROM/DVD-Rom drive & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.

    My readers Optiarc DVD - RW AD-7530 ATA Device DVD/CD-ROM & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.
    Although of course, the CD-ROM drive worked during the upgrade.
    I noticed that when I turn firstly on the laptop, the last two lines of the front entry from Windows 7 are the following.
    PXE - E6i:Media Test Failure, Check Cable
    PXE - MOF: Exit PXE Rom
    During the audit of each Properties in Device Manager devices", I learned that they both work correctly.  In the list in the printers and the @Devices the only Webcam shown is also a "USB 2.0 Camera"
    Can someone help me please?
    Best regards
    John

    Besides what abdelhak says:

    The message of PXE boot that you receive when you start your computer has nothing to do with your CD/DVD-Rom drive. Your computer uses a PXE boot method to attempt to load Windows from a location on your network. Since you do not have this configuration, it is safe to ignore it. If it slows down the startup time of your system, contact your manufacturer and ask them for instructions on how to "disable PXE Network Boot of the BIOS.

    Hope this helps,

    Thank you! Ryan Thieman
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • How can you correct - an error occurred in ejecting ' DVD RW drive (e) "."

    I was wondering what is happening. Works perfectly an hour ago now, it does not respond when I press the button to eject the trey. When I try right click then eject it comes with, an error occurred while ejecting ' DVD RW drive (e) "." What is happening to her?

    Hi Scorpion1138,

    Please use the forum.

    Quick question, have you tried to reboot your PC and eject the DVD until windows loads? It might just not be well wedged into the slot.

    Give that a try and let us know if it worked for you.

    JohnD
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows 8 cannot access the drive properties by right-clicking on a no C SATA or USB drive

    Normally the drive properties are selected by right clicking the icon of the hard disk, which gives access to the use of storage and the Player options selected check disk. In Windows 8, I can get the properties of the disk on my C drive by right clicking, but not on any other drive. Right-clicking on any non C drive of the computer loses the office for about 10 seconds, then it returns, but never shows the drive properties window. Help, please! Thank you

    Hello

    Welcome to Microsoft, the best place for all your related queries windows community.

    I see that you are unable to access the drive other than drive C Properties window.

    I would like to suggest to run the command sfc/scannow because it is something related to the file system and check.

    The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. When the analysis is complete, the System File Checker tool indicates whether integrity violations were found. If integrity violations are detected, the System File Checker tool difficulty integrity violations.

    Follow these steps to run sfc/scan.

    a. press Windows + X and click/click on (Admin) command prompt.

    b b.. in the elevated command prompt, type sfc/scannow , and then press enter.

    NOTE: It can take some time to finish the race.

    Let us know the results.

    If you have other questions related to the properties of the disk, feel free to join us at any time. We're always here to help.

  • HP Compaq Desktop 6000 Elite: Replacement DVD-Rom drive with HP DVD + RW/CD-+ RW

    OK, I have a HP 6000 Elite with a DSVD-Rom (Multi Player) drive.  I would like to replace this drive with a model HP DVD + RW / CD + RW #447310-001. Drive TS-H653 410125-501.    Search for cases iside the PC, I find there's black wire to one (1) and a 1 connector with 2 black, a yellow, a red son.   No one knows it is all the cable/connector that is required for the DVD + RW / CD + RW drive market?

    I read where it is a connector cable BLUE on these units.  If so, where I buy this cable?

    Thank you

    Hello:

    Yes, you just put the existing cables from the old dvd drive to the new.  Nothing else is necessary.

    You can consider a used but tested and working one on eBay. Saves a lot of $$$ than buying again at HP.

    http://www.eBay.com/Sch/i.html?_FROM=R40&_sacat=0&_sop=15&_nkw=447310-001&RT=NC&LH_BIN=1

    When I buy off lease HP business PC that do not come with a DVD - RW drive, that's what I do.

  • I can't eject my cd from the cd/dvd internal drive

    I can't find the cd/dvd internal drive in Windows Explorer.  Without seeing the car, I can't eject the cd inside.

    Hello

    Follow these steps and use a paper clip to open the drawer

    http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

    http://www.ehow.com/how_2324439_eject-stuck-DVDCD-drive.html

    so try these fixes

    Try the microsoft 'fix - it' for your problem below

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

    and read this information too

    http://support.Microsoft.com/kb/982116/en-us

  • hp scanjet 3500c driver for WINDOWS 7

    HY,
    can you help me with the driver for my HP SCANJET 3500c scanner. I have microsoft XP and it works fine, but now I have WINDOWS 7 and my scanjet will not work...
    Can you send me the link for the software for windows 7 or the application of pilot... And if it does not you can send me why?

    Thank you

    It is not the responsibility of Microsoft to write drivers for other manufacturers ' products, but the manufacturer; and in your case it would be that HP is to write a new driver for Windows 7 for this model scanjet, which of course, they did not choose to do so - they may believe that the product is beyond its life cycle, maybe something else.

    As a possible workaround, if they list a driver for Windows Vista (and the correct version of bits, that is, 32-bit or 64-bit) I'd give a try (after creating a new restore point). Once again, it is what I would try, proceed at your own risk.

    Kind regards

    chet814

  • P7 - 1298c: p7 - 1298c w / HP SW810 (?) DVD - RW drive

    I'm trying to update the firmware of my DVD - RW drive on my HP desktop computer (model #P7 - 1298c).  However, when I allow HP to scan my computer for updates, it shows the firmware for the HP SW820 updates.  My Device Manager indicates that the drive installed in my computer is a SW810.  Is the information in incorrect device manager?  I don't want you try to install update wrong firmware and the drive of brick.  Please let me know.  Any help will be greatly appreciated.  Thank you.

    Adam, welcome to the forum.

    According to the driver page (select OS and Version and click on update) for the computer, the SW 820 seems correct.  You can try to update the Firmware, if it is not correct, it will not simply complete the update.

    Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

Maybe you are looking for

  • I am unable to repair Vista on Satellite L300

    Hi all! I have a grilfriend L300 just died the other day.The laptop was purchased at a Swedish retailer just a year ago, so the warranty just expired. I have no idea why the laptop crashed, but since then there it does not start. Whenever the power i

  • With 7310 cant scan... all other functions work fine

    Hi, I never got my 7310 to analyze!  If I try to scan on the front of the 7310 button it says select a computer.  If I select this it says I need to install or run the software for this function to run.  If I try to display Document HP it gives an er

  • FULL creative cloud - received TRIAL membership

    I bought FULL creative cloud - a membership I have Download Premiere PRO no problems, but when I download After Effects I received the EVALUATION VERSION with only 26 days to go.What should I do?

  • Behavior changes suddenly in Apps

    HelloI saw behavior changes suddenly in some Adobe applications today.  (1) for the opening after effects 2014 I no longer receive the Startup dialog that allows me to open new, recently opened, ect.  Also it seems all of a sudden I can longer open P

  • Replace 'static' right banner banner right 'slide show' in html implementation of the default library v3

    I am currently updating an existing company DPS application. I use the 'DPS' online configurator to create an implementation of HTML iOS7-style update of the default library (v3). I also want to implement the banner of payment for the slideshow of th