DVD sometimes plays until the main menu, then screen-gel - hardreset

Similar Questions

• DVD stops playing, jump to a menu

  I have a video statement, third in a series. First two are already at the duplicator, they both work very well. The third is, uh, Act a little. :-(

  The video is a little over an hour of time. Source is 29.97 1920 x 1080 p. published in Agency cs6, AE, hearing cs6 cs6. There are 32 chapter markers, some of them used only to tell a playlist of chapter cs6 yet where is the end of a chapter. The target is widescreen DVD. Transcoded by SOUL cs6.

  There are four menus. The main menu includes buttons to 'play' and then three other menus. There is a chapter menu that is 'normal' that you choose a chapter to begin, and the video plays from there to the end. The other two menus to specify up to five chapters to play as a group chapter playlists.

  With this set of context, the problem is that when to put the physical DVD in a DVD player and press 'play' in the main menu, the video starts in Chapter 1, as it should be, then play until he reaches the fifth chapter marker, then it stops and goes to the Menu 4. It shouldn't do. It should simply play through the end of the video.

  It turns out that this chapter 4 marker (the marker just before where the trouble begins) is used in two playlists chapter - one used by 3 menu 4 Menu. Both have stock of end to return to their respective menus. Both play very well on the physical DVD. In the case of Menu 4, the chapter playlist contains just one chapter - when it hits 5 chapter markers, it stops and returns to the Menu 4. Sound familiar?

  So why this behavior of playlist chapter going outside a used chapter playlist? What can I do to get back my ability to play the video passing by?

  It seems that I can't do an end of chapter action be "undefined" once was defined.

  Choose Properties, and press the delete key. I think that it will be "undefined" it.

• How are you going to the main menu while watching a dvd

  While watching a dvd how do you get to the main menu?

  In Media Center, right-click and select controls then menu options to go to the DVD menu.

• How could I NOT have a scene selection on the main Menu of the DVD?

  With the help of PRE 11.  I have a clip only, with no scenes (imported from a VHS).  When I try to make a DVD, it adds a default scene selection in the main menu of the DVD.  Since there is no 'scenes' (at least I think the scenes on a regular DVD), is anyway to remove/delete button on the main menu scene selection?  All the models that I have seen include the scene selection.

  In the same vein, I import a few VHS convert to DVD that will have several 'clips' on each of them.  For example, "Christmas 1988', ' holiday of summer 1989", etc.»  What I want to do with those, it is having the "clips" separated as a choice on the main Menu of the DVD, and have still no scene selection.

  Is this possible?   Also, I bought a Photoshop/Premiere Elements a few years and a couple of versions ago (because the sale price was the same as Photoshop Elements only).  I just watched the first after installation, didn't really use it, but it seemed to me that there are many more styles DVD.   Can I download other models from Adobe, or is that has come on the DVD there are all?  Is there anyway to make my own, because I don't see just a pattern of single color base type, it's too loud for me.

  Thank you

  I still don't know what you're doing. (Are making sure to turn off the option for the program adds automatically the markers of scene?)

  I just tested myself and certainly do not create a menu if you do not have menu scene marks.

  Can you post a screenshot of your timeline so we can have a look? Make sure that you press on the-key first, so that we see the entire timeline.

• How can I add a text field for the main menu?

  I have a project with a menu.  He has a title.  I wanted to add an additional track on the menu, what I had done in an earlier draft.  I would have thought he would have intuitively obvious, as highlighting the existing title I and do a copy and paste.  However, I learned that nothing is intuitive with Premiere elements 12.  Can someone tell me how to get a 2nd title on my main menu?  I have done it before, but apparently did not write it and I was faced with that I falsely assumed would take me 30 seconds to accomplish.  Thank you.

  Rick

  Do you really need a second title for the page in the main menu and the selection of scene or you page fixed for your Adobe title in more than one line?

  I wonder

  I wanted to add an additional track on the menu, what I had done in an earlier draft.

  Is it possible that as soon as you use a theme which came with 'subtitle', as the trip/Beach Resort, not all do.

  

  Workaround for the title with more than one line of text can backfire on you. But you can try. Excerpt from my first items 13 on this blog

  0019 first Elements 13 movie Menu title question: multiple lines of text

  
  A first elements 13/13.1 user reports that, if it creates a 3 lines of title text for the main menu of the fake big screen theme in the customization area of Movie Maker project, these 3 lines of text eventually "encoded" in the project of reopening after that that there had been closed.

  We have confirmed this report and extended it to include this problem appears for 13 of Menus other than the fake Widescreen cinema. This issue is not seen in first items 12/12.1 and earlier versions.

  BEFORE REOPENING THE CLOSE SAVE

  Figure 1. Main menu of Spring Flower home with 3 lines of text, as seen before the closure of the Reopen

  AFTER THE REOPENED NARROW SAVE

  
  

  Figure 2. Spring Flower main Menu title initially with 3 lines of text, as seen from the closure of the Reopen

  
  
  The only way found so far to get the final product to have 3 lines of title text for menus in the final product is to customize the theme to the movie Menu in the customization of the Menu movie of the project area, do not save, close the project at this time and can do the burn to.

  
  Many variables were examined to explain this behavior. So far, no answer for why.

  If you are determined to use a particular theme that comes with the title menu and subtitle, look at the text of the Palette layers layers in the editing menu .psd file (.psd Editor could be Photoshop CS or higher).

  Regarding

  on my project last year that was the menu that I liked with 2 text fields, I have also got rid of the "arrow" shortly before the text that was the menu key.  Anyone know how I do that?  I can't figure that out now.

  Could you be more specific. But, for now, consider... If you Play All text, you double-click to open the text of the amendment, the deleted text, click OK. Play All disappeared. Sometimes, in page and removal of text "main menu" scene selection to the navigation button... double click on the button to open the changes to the text, delete text, press ENTER, and then bar spacing, and click OK.

  Please let us know if everything above the target you wanted to know.

  Thank you.

  RTA

• video gets sent back to the main menu after the first chapter

  Last night, I burned this DVD and it was perfect - no error message to check the project.  It burned on a disc very well.  Then I went to bed happy.  I woke up and popped the DVD in a DVD player.  When I hit the play movie button, it plays a chapter only before returning to the main menu.

  So I went to the scene selection, and when I choose the 1st chapter to look at, it's going to do the same.  After the first chapter, it goes back to the main menu.

  If I choose the 2nd chapter, he continued to play through the video normally.

  It makes me carzy, so I thought that I was watching the movie in the preview.   Sound disappears and the video freezes for the first chapter.

  Here are some screenshots of my project and the flowchart:

  

  

  

  Any help is very appreciated.  Thank you!

  Edited to add: after preview freezes, and I close out of it, he says: "unspecified error of drawing."  I just made another preview, just to play the movie and the sound was there, but it froze after a little in the chapter.

  The complete project JPEG is too pixelated to really say much about it and the linked version has a header error and does not open. Can you redo this JPEG and maybe use a PS JPEG about 9 frame? It would also be useful to have a close-up view of the timeline with chapter markers.

  Now, what are the Actions of end for each of these chapters?

  For the Play of All, have you looked in a chapter Playlist? If you create one, with the chapters in any order you want, and then set end of Playlist Action chapter to return to your main Menu, "replacing" the end of chapter Actions. NOTE: I use the term 'override' as a verb and the noun "ignore."

  Regarding replacements, this sounds like there might be still a TAPI on. They can be applied in many places, and it's a bit of work to check all the buttons, chapters, timelines, etc.. They can be literally anywhere and should not be used.

  Forward the new screenshots. Might be something obvious here.

  Last question: how long is your first chapter?

  Good luck

  Hunt

  PS - most of us ignore an "answered", or similar icon and read almost all the wires without worrying.

• can't get to the main menu with my remote

  Hi guys, someone throws forward? I have a main menu and 3 menus of scenes.  When I hit the "menu" button on my remote, it goes to the menu stage 1.

  I created a certain projects until now and my remote worked well with them.

  But on this project, in every single scene menu, if I hit the top menu, it goes to the menu stage 1.

  I have reviewed my settings and can't seem to find where this fact is somehow indicated on my project. IF I don't reach my "main menu" button it will go to the main menu.

  Thanks for any help! very much appreciated.

  NAVE

  Now, how can I change these?

  Here's my menu with the Routing button:

  

  Note this button number 6 titled "gravity" is followed by the key #7 "I had my mom.  He is one who WILL not arrow down. So if I'm on "gravity" and "arrow down", it goes to the "funkytown" and refuses to go to "I got from my mom.

  To change this, first select the menu in the project Panel and now in the properties panel, uncheck the "Automatically Route buttons" in the properties of the menu.

  Now in the figure above, you will see that the mouse pointer becomes a hand icon when you hover over any number of the rectangle button number.

  Simply drag the desired number and you're done.

  For example, in your case, to go to the #7 button when you press the #6, go to the reduction in the rectangle of the #6 key and drag and drop it to number 7.

  Then, you'll see that the rectangle button # 6 number 7 instead of the number 8 (which is in the figure right now.)

  Do this for each button.

  Good luck.

  Thank you

  Ramesh.

• Empty folders in the main menu

  Hello
  
  I've set up some users, but I have a problem.
  
  Some records remain in the main menu (whithout even showing all pages inside) which is a little annoying. Does anyone know how to remove them?
  
  Also, I was wonderign if it was possible to change the composition of the record? For example, put pages in different folders?
  
  Kind regards
  Stijn

  Yes, deleting it would remove all users. You don't want to delete it. When you have found the folder in the Structure and the content, click on edit, then go to the Security tab. From there, change the list of lists of permissions for authorization lists used by the child ARB corresponds to the list.

  A folder must contain all authorization of each of his children ARB lists. Sometimes, these can get out of sync.

• Some dropdown menus drop on the left edge of the page instead of under the main menu

  Some drop-down menus at the left edge of the page instead of under the main menu.
  This does not happen on all web sites. Very confusing.

  Yes, I see the same thing with Firefox 21 with the menu container.
  
  Works fine for me with the beta version of Firefox 22 and later, it's broken in the current Firefox version 21.

  You can consider making a custom of the beta version of Firefox 22 Setup or wait a few weeks until Firefox 22 is released.

  • http://www.Mozilla.org/en-us/Firefox/all-beta.html
  • http://www.Mozilla.org/en-us/Firefox/beta/

  You will need to create a new profile for the beta version, so not to launch Firefox after installing the beta.

  See:

  • http://KB.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
  • http://KB.mozillazine.org/Shortcut_to_a_specific_profile
  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox

• I need to disable the 'Help' option in the main menu.

  I am running Public Fox 1.09 as an addition in our school district, because it allows me to keep the students from our proxy. They discovered that all that they have to go to 'Help' and 'restart with disabled modules. They can then select "Not of Proxy" and get anywhere that they want. I need to disable the 'Help' option in the main menu.

  Hello NeonLeon, if it would be possible in principle to hide some menu entries, the next thing that your students will discover is that you can also get in safe mode by pressing the SHIFT key while launching firefox, so it's no solution...

  You can use a mozilla.cfg file in the firefox program folder (where the students hopefully will have no write access) to lock some preferences as the configuration of your proxy, for more information, see: http://kb.mozillazine.org/Locking_preferences

• How to restore the main menu (modify, display, help ect.)? He disappeared

  How to restore the main menu?

  Hello

  Restore it in what?

  in windows Explorer

  Open it and then click on organize then page Setup then menu bar

  in internet explore

  Right-click just below the address bar, and then click menu bar

  or go to tools in the upper right and select menu bar

• APPLICATION will not appear on the main menu of the Simulator... Help, please

  Hello everyone,

  I came across this example code and tried to run on the Simulator 9900 and for some reason, the Simulator does not pick up the code. ..

  as the application does not appear on the main menu screen options... so I can not fire at all.

  someone knows why... ID really appriciate the help

  (Note: the simple code opens a new window when clicking on a button)

  Kind regards

  gezzy

  package mypackage;
  
  import net.rim.device.api.ui.Field;
  import net.rim.device.api.ui.FieldChangeListener;
  import net.rim.device.api.ui.UiApplication;
  import net.rim.device.api.ui.component.ButtonField;
  import net.rim.device.api.ui.component.LabelField;
  import net.rim.device.api.ui.container.MainScreen;
  
  public class FirstScreen extends MainScreen implements FieldChangeListener {
      ButtonField theButton;
  
      public FirstScreen() {
          add(new LabelField("First Screen"));
  
          theButton = new ButtonField("New Screen", ButtonField.CONSUME_CLICK);
  
          theButton.setChangeListener(this);
  
          add(theButton);
      }
  
      public void fieldChanged(Field field, int context) {
  
          if (field == theButton) {
          UiApplication.getUiApplication().pushScreen(new SecondScreen());
          }
  
      }
  
      public class SecondScreen extends MainScreen {
  
          public SecondScreen() {
              add(new LabelField("Second Screen"));
          }
      }
  }
  

  I think you are saying that the application icon will not be displayed on the Simulator? If so, this can help (I had the same problem and what I did):

  1 assuming you are using Eclipse, just run the program (it will be forfeit and display an icon to load for a few seconds on the Simulator).

  2. then go to file-> load BlackBerry Application or theme on the Simulator.

  3 navigate to your compiled COD of the file, then open it.

  4 after a loading icon, the application should appear in the menu.

  If this does not work, try to close the Simulator and do step 1.

  I hope this will help!

• Display msg text blackBerry Smartphones to the top on the main menu and can not remove it

  All of a suddend a text msg popped up on the main menu under messages.  I have since read the message and deleted, but he is still listed in the main menu.  I deleted numerious times but can't seem to get rid of it.  Any suggestions?

  Restart the device taking (with the phone lights up) take out the battery for 30 seconds and then reinstall again, try again to delete the SMS and let me know

• where is the main menu button

  I'm looking for the main menu button

  The main menu depend on your phone.

  If you have a phone with a menu button Android it will be activated by this button.

  If you have a phone with a switch button Android app it will be activated by pressing the three points or lines near the address bar.

• Imported bookmarks in safari are in a bookmark called IMPORTED FROM SAFARI. Can they be merged into the main Menu of bookmarks?

  I had a few existing Firefox bookmarks but wanted to add a bit of Safari. Now, the imported bookmarks from safari appear as a bookmark called IMPORTED FROM SAFARI. How can they be merged so that all bookmarks fall under the main Menu of bookmarks?

  You can move or copy/paste to another folder in the library (bookmarks/history Manager) through the context menu or the menu organize button on the toolbar.

  • Bookmarks > show all bookmarks
  • http://KB.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox
  • https://support.Mozilla.org/KB/sorting+bookmarks