DVD Super Multi Drive problem - cannot access any CD - Satellite A100

Hi, 1st post:

My Satellite A100 features a DVD Super Multi drive, which worked very well. However I cannot now access any CD - error message ' D: / is not accessible. The request could not be performed because of an i/o device error."is displayed.

However I can still access DVDs without problem. Can anyone help?
Thank you.

can try this
Right click on the drive w / the problem
Properties
Recording tab
and then check the box "enable recording on this CD player.

If this does not solve it you have Roxio Easy CD Creator is installed to check this
http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 315350

or if you get an I/O device error message, this problem may occur when Windows tries to use a transfer mode that can not use your CD player
RESOLUTION
To resolve this problem, change the transfer mode for your CD drive in IDE channel properties. To do this, follow these steps:
1. Click Start, right click my computer and then click on manage.
2. under the (Local) computer management, click Device Manager.
3. in the right pane, expand IDE ATA/ATAPI controllers.
4 right-click the channel where your CD drive is connected, and then click Properties. In general, this channel is secondary IDE channel.
5. in the Advanced Settings tab, in the zone transfer Mode for the device that represents your CD-ROM drive, click PIO only. As a general rule, this device is device 1. And then click OK.
If the problem is not resolved after you change the transfer mode for the secondary IDE 1 channel device, your CD drive should not be located there. Use the same procedure to return to the DMA transfer mode if available. Then, repeat these steps to change the transfer mode for IDE devices in the following order until the problem is resolved:
Primary IDE channel, device 1
Secondary IDE channel, device 0
Channel IDE primary note, device 1 is connected to your boot disk. It's the hard drive that contains your operating system.

hope that fix you :)

Tags: Toshiba

Similar Questions

  • Satellite L10 DVD Super Multi Drive - E/s of entry Error Message

    Does anyone know why, when I try to play a CD or CD-ROM, I get a box saying i/o error of entry?
    I have a Satellite L10 with a DVD super multi drive. It can read DVDs and DVD ROM

    I thought maybe it was a cable connected the drive itself, but if it's that I need how out of the car and how to support.

    I tried updating the driver and uninstall it then reinstall the drive, but I still have the same problem.
    Cannot use the accompanying software as is all the cd.

    Please can someone help me.
    Thank you

    Hello

    In most cases the entrance of e/s, error message is related to a hardware malfunction (CD/DVD drive).
    The readers of the lens laser can not calibrate properly and therefore it can not read the CD inserted.
    These errors are not uncommon and occur mostly after a long period of use due to a material stressed.

    But let's check the last possibility of solution;
    Go to Device Manager and remove the drive from the list of devices CD/DVD.
    Then start the registry (regedit) and delete the Upperfilters and Lowerfilters completely from the following registry key values:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    Then, restart the computer and check if it of possible to read CDs.

  • Don't burn DVD Super Multi Drive no CD

    Carpet * a DVD Super Multi Drive not burn a CD but DVD
    Burn - no problem

    Hello

    Try to remove the drive from Device Manager. After the start, the player should be recognized. Check if this procedure will solve the problem

    Good bye

  • Sat Pro L10 DVD Super Multi Drive

    I have a new Satellite Pro L10 with DVD Super Multi player running XP Pro. I was not able to write on the DVD player - either it does not recognize the DVD in the drive or it blue screens and crashes when I use the Windows backup installation until I read the error message. Now I get very nervous, I could not support the 6 weeks I got it...
    I can play the pre-recorded (of movies) DVD in the drive and it can read CDs and some brands of DVD. The manual is singularly useless on the use/troubleshooting of the Super Multi drive

    Hi Christine,

    I don't think you can use the Windows backup to record directly to CD or DVD. The following is an excerpt from the Microsoft web site: -.

    • .......... Unfortunately, the Windows backup utility cannot save files directly to a CD - RW disc.

    Have you tried the software to burn DVDs. I think that you should have Sonic RecordNow and Windvd.

    HTH

  • Satellite Pro 2100: TEAC CD drive problem - cannot access CDs

    Hey

    I got my Satellite Pro 2100 for another few years.
    So far it has worked well.
    However, now the cd player is always displayed the yellow light just after trying to load a cd, followed a quiet thump. This means that I can not access the content of the cd (audio or data).

    The drive is still recognized by Device Manager, and I'm told it works well - I know better however, it most certainly isn't! the drive will still appear in my computer, and I can always try and discover the contents of the cd inserted, which is always empty!

    Ant help or advice would be most appreciated, because I really want to re-preparation of the system!

    Hi Simon

    The satellite Pro 2100 is an oldie ;) and I guess that you pointed out the CD/DVD drive all the time long.
    I would not be surprised if this player is dead. For me, it looks like the end of the device.

    Until it must be said that I'm afraid you need to replace the CD/DVD drive with a new m.

    Best regards

  • Satellite M40-185: DVD super multi drive does not read the CD

    I own a Toshiba Satellite M40-185. It is mounted with a carpet * a DVD-RAM UJ - 831S.
    When I put the CD - R, which are supposed to work on this drive however it read as a CD - R [i.e. the icon changes from DVD - RAM drive in my computer to a CD - R]

    However, when you double-click the drive it says D:\ accicble not. But it works fine with DVD.
    Recently, I found that it stops between buring DVD as well. I got the replaced disk from Toshiba, but it was not to last long either.
    I wonder if his software level problem.

    I tried to update the firmware but it does not work because it's another drive for this what is mentioned on the website for drivers...

    Maybe it s only a registry error?
    I read different statements here in the forum and especially the deletion of in the upper and lower registry filters helps to address these issues.

    For more information, see this page of Microsoft Knowledge:
    http://support.Microsoft.com/kb/270008/en-us

    Completely remove the Upperfilters and Lowerfilters from the following registry key values:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    and then restart the laptop

    Good luck

  • Qosmio G20-126 where I can buy DVD Super Multi (Double Layer) drive?

    Hello
    Can someone help me and tell me where I can buy DVD Super Multi (Double Layer) drive
    DVD model: UJ-846-C flop in 12.7 mm
    Qosmio g20-126

    Thank you
    :)

    Hello

    Have you tried to search some online dealers that provide this part?
    In addition, you could contact a certified maintainer Toshiba in your country to order this part.

  • DVD Super Multi (Double Layer) drive does not not in Satellite A200 - 1 M 4

    In A200 - 1 M 4, suddenly DVD Super Multi (Double Layer) is not in operation.
    In Device Manager, the device is listed with an exclamation mark?

    I tried to restore the system, but the system restore does not work also.

    Operating system is Windows Vista.

    Kindly help me to solve this problem.

    Concerning
    Kamal

    Hello Kamal

    The solution under Windows XP Home edition is known to me, but I never had the opportunity to check it out on Vista. If you want a quick solution to recovery DVD and reinstall Vista.

    And of course, don't forget to backup all your data before doing this.

  • Firefox starts, but cannot access any website.same issue is experienced with Chrome, not Explorer

    Hello, I have a problem with surfing with Firefox. The browser starts but cannot access any Web site. The same question is experienced with Google Chrome. However, Internet Explorer works smoothly. Thank you

    Some problems occurs when your Internet security program has been implemented.
    trust the previous version of Firefox, but not more acknowledges your
    update as being approved. Now how do I solve the problem: to allow
    Firefox to connect to the Internet

    • Make sure your Internet security software is up-to-date (for example, you are using the latest version).
    • Delete Firefox to list your program of programs approved or recognized. For detailed instructions, see

    Configure the firewall so that Firefox can access the Internet. {web link}

  • New user cannot access any area of activity

    Hi, I use Discoverer Desktop 9.0.4.43.17 and administrator of 9.0.4.43.18 and I have a new user cannot access any sector of activity, I tried to create a new business district to test and access the Security window on the Client of Directors for this user and my user (works very well!), for my user that this new BA shows normally on the desktop but for new user the selection of business on Assistant workbook area shows nothing. It's something to measure new users to access the space business?

    Published by: user2997975 on 06/04/2009 07:19

    Hello
    As suggested by Rod it sounds as if you may have several EUL in the same prod73. Try to connect again, but this time go to tools | Options and click the EUL. It is the last tab on the right side and you may need to click the button to the right (next to connection) several times before seeing the EUL tab.

    Under the EUL tab, make sure that the EUL you want to connect is selected. If it is bad you will need to change it, click on the OK button and then reconnect to the database using file | Connect to the database.

    This time you must point to the right EUL.

    Best wishes
    Michael

  • Satellite M60 - 164 need Win 7 driver for Player DVD Super Multi TS - 632B

    I have a portable satellite m60-164, I put windows 7 on it and windows does not recognize as a multi drive only a dvd - rw.
    can someone help me find a readers who works on Windows 7?

    PLEASE

    Hello

    I completely agree with Akuma. Windows 7 supports and include clean driver CD/DVD from Microsoft. If the optical CD/DVD drive should be automatically recognized by Win7.

    You see the ODD in Device Manager?
    If there is a yellow exclamation point, remove the ODD of Device Manager, and then restart the device after restarting again the laptop must find new device and should recognize this.

  • Satellite P100-221: DVD Super Multi DL drive does not work properly

    Hello world!!!

    the problem is that one day I inserted my CD - RW in drive, launched Nero but failed to remove any previously saved data of him cause I couldn't push the button 'clean' (sorry, not sure he's called this version in English).

    In my computer, where all readers are collected, in the context menu for my drive I couldn't find option to erase the disk. In the properties of the label record disappered (label where I could mark the box: Alow CD recording).

    I also tried to burn many Cd - R with nero, I recorded using multisession with a small amount of data, but after this, I was not able to record something on their cause, they have all been closed and developed, too, I told nero ot not to develop.

    Maybe someone can help me, I don't want to reinstall windows.

    Hello

    I think that this is not a drive problem but possible it s more a configuration issue between Nero and second burning software.

    I think on many laptops Toshiba sound recording has now been installed.
    This software can be used for disc erasing and finalization.

    Please check the application.
    I put t don't know if this helps but maybe when you remove the sound recording now Nero does not improve.

  • Photo folder "Windows explorer has encountered a problem and needs to restart" and I cannot access any of my photos.

    Windows Vista and, recently, I scanned a few photos and now my pictures folder won't open and gives me an error "Windows explorer has encountered a problem and needs to restart" and I can't access any of my photos.

    Hi LuiMTX,

    This problem is only limited to the pictures folder?

    Method 1: Let flow the fixit available in the link below and then check

    Windows Photo and slideshow problems
    http://support.Microsoft.com/GP/windows_photo_and_slideshow_diag/en-us?EntryPoint=lightbox

    Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

    How to use the File System Check
    ER tool to troubleshoot system missing or corrupt files on Windows Vista or Windows 7
    http://support.Microsoft.com/kb/929833

  • Tecra A4: Matsu * a s uj - 831 - cannot access any data CD

    Hello

    I have a new toshiba tecra a4
    I have the combo dvd: Matsu * a UJ - 831S
    and I have the following in less than 4 months of use problem:
    Since yesterday I can not access any data cd, audio CD are ok, so on DVD.
    When I go to my computer and click on the drive I get the message "D:\ not accessible incorrect function".

    I tried to uninstall the software, etc. But nothing.
    I tried to boot from the dvd from Toshiba, is the beginning, I tried to boot from cd does not start.
    so the problem is hardware
    I downloaded the firmware (Loder_831_V102.exe), but he said: "the target disk is not connected" and I can't upgrade.

    So what is the problem, can it be fixed?

    Hello

    It's not easy to tell how to solve this problem.
    But first of all, you can try to remove this device in the Device Manager.
    After startup, the operating system should recognize the drive again.

    If this procedure doesn't help, well it could be a disk failure.
    If the warranty is valid, you should ask the ASP for a replacement.

    Good bye

  • External hard drive problem (cannot delete files)

    I have an external hard drive that I use Windows XP and I am now on Vista 64-bit. I have no problem to access the files on the disk, adding of new files or move files on the hard drive. However, I can't delete the files located on the hard drive. If I right click on the folder or file, the Remove option * literally * does not appear in the menu. I'm on the administrator account (only the account that was created).

    The problem may be somewhere around this: if I right click on a file and goto Properties, read-only is enabled. If I disabled it and save, it acts like it is the application in the directory and all its subdirectories. When I return to the properties, it is again read only. I guess that the problem lies somewhere in the present.

    Any suggestions? This has been an incredible pain for many months.

    Thank you

    Hello Yuhatn,

    Thank you for posting.  Your problem is related to the file ownership.   You will need to change the permissions of the file/folder to be able to remove it.  You can do this by right-clicking on the file/folder and selecting the Security tab.  Once there, you can change the permissions of your account regarding this file/folder.  You may need to do this for all files in a folder to be able to delete the folder.  There is a 3rd party tools that will allow you to add this feature in the right click menu.

    Please let me know if this helps you. Zack
    Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for