DVD will not play on the standalone DVD player

Similar Questions

• Series TV downloaded from iTunes will not play on the portable media player error: media type cannot be read

  Series TV downloaded from itunes will not play on my player portable media. I get the message, "the media type cannot be read.

  Hi ChristopherEaddy

  
  1. what operating system is installed on the computer?
  2. What is the type of file that you try to play?
  3 is supported by Windows Media Player file type?

   

  I suggest you to check and to provide us with the information about the installed operating system.

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

   

  Please refer to the below planned links and check the formats supported by windows media player file. Check if the information helps-

  http://support.Microsoft.com/kb/316992

  http://Windows.Microsoft.com/en-us/Windows7/C00D1199

   

  I hope this helps.

• Why the clip will not play in the window of the observer?

  Hello world. It's me again. So, I just started working on a project, and the clip will not play in the window of the observer. In the timeline panel, I see that there are images to play, but the Viewer is black when I try to play. I have temporary can solve it by leaving FCPX and opening it again, but after a few minutes, the display window stops again, and it's a pain to have to do every time so I can watch a few minutes of film. Just so you guys know, do it mode multi-cam, incase that has an effect on it. Thank you very much!

  You have the options of display Angles show the value? You are in the editor of the Angle or the project timeline?

  Russ

• USB sync will not play on the sync in car package

  I have CDs that I ripped to my playlists and then synchronized on a usb key.  Will play on the computer, but not in the vehicle.  What I am doing wrong that the USB sync will not play in the vehicle?

  CIA

  Hello

  1. have you ripped music files and synchronize directly on USB?

  2. What is the file format of the files that you ripped?

  3. are you able to play the songs in a different computer?

  This problem normally occurs when the radio does not support a specific file format. If you are able to play the songs to another computer, I you suggest to use third party software to convert .mp3 files and then check with the question.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information helps. Response with status so that we can help you.

• SWF file will not play on the Internet

  I've been everywhere on the internet, find the answer to my problem. I have a site in which I have two Flash animations that I need to play. We're working very well. I bought a model flash, edited, published, no problem. The other, I have a photo gallery template I customized, but it will not play on the internet, not even with the generated html file. Just a big black square appears. Here is a url to the nonworking time:
  
  www.atlantiswebandgraphics.com/ScottHambergArt.html
  
  This is the HTML generated by Flash 8. I noted that the publication of Flash 8 settings are set to 'Default' and the other Flash file that works is set to "Flash CS4 Settings." When I add that as a profile with a photo gallery, I get the error messages. I have screenshots of all the parameters in Flash, work and not work below files:
  
  www.atlantiswebandgraphics.com/images/WorkingPublishSettings.jpg
  www.atlantiswebandgraphics.com/images/NotWorkingPublishSettings.jpg
  www.atlantiswebandgraphics.com/images/NotWorkingPublishSettings1.jpg
  
  It's the working Flash file url: www.atlantiswebandgraphics.com/index2.html
  
  I could give much too much info, but I think better safe than sorry. And by the way, I'm really new to this (that's why I get models).
  
  Diane

  Thank you. I've decided to basically start from scratch on this model. It works now. As you say, must have been the unfinished function.

• DVD will not play on the computer.

  my computer crashed.  The computer files were all saved, but I can't find any programs.  For example, I can no longer play a dvd.  I have Windows Media Player, but it won't play the dvd from the library movie.  Also, when I go to computer/CDrom, the CDrom is empty.

  Thank you for your help.

  If it's a cd rom it will not play a dvd disc. Have you ever read a dvd on it? Is that what you did re - install Windows following the accident?

• DVD will not play in my Windows Media Player.

  My windows media player will not play the dvd. I get the message ' is Impossible to access the file, the file may be in use you will no longer have access to the computer on which the file is stored, or your proxy settings are may not be incorrect. "

  My windows media player will not play the dvd. I get the message ' is Impossible to access the file, the file may be in use you will no longer have access to the computer on which the file is stored, or your proxy settings are may not be incorrect. "

  ==========================
  Maybe you need a DVD decoder:

  Info about DVD decoders:
  Plug-ins for Windows Media Player
  http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx

  Or... you'll love the free VLC Media Player:

  VLC Media Player
  http://www.videolan.org/

  And it may be worth trying to install a codec pack:

  * Proceed at your own risk *.

  CCCP (combined Community Codec Pack)
  http://www.CCCP-project.NET/wiki/index.php?title=Main_Page
  (FWIW... it is always preferable, if you create a system restore
  point before installing any software or updates)

  Good luck. John Inzer - MS - MVP - digital media experience

• Why my system will not play "Avatar", the movie, and why he won't play a. MOV movie file smoothly?

  I don't know enough to provide more details.  I have a Canon camera, with all included software installed and a film I made that displays just fine on the camera and television, downloaded but will not play smoothly around a bit.  Brand new with Windows 7 computer.  It is what appears on the screen:

  Windows Media Player cannot play this DVD because it is not possible to activate the analog copy on the output display protection. Try to install a driver available for your video card.

  In fact I don't think I have a se video card.  I got 500GB of memory, 2, 4 GB of RAM, with a 3.6 GHZ processor.

  Thank you.

  Giaour

  Hi Giaour,

  Which version of QuickTime is installed on your computer?

  Apple Computer developed the QuickTime file format to create, edit, publish, and view multimedia files. QuickTime format can contain video, animation, graphics, 3D and virtual reality (VR) content. Only QuickTime files version 2.0 or earlier can be played in Windows Media Player. Later versions of QuickTime require the Apple QuickTime Player owner. For more information, visit the following Apple Web site:

  http://www.Apple.com/QuickTime

  More information refer to the following Microsoft article.

  Information on the types of media files that supports Windows Media Player

  Try the following and see if it helps.

  Method 1:

  I suggest to run the Windows Media Player settings Troubleshooter and check if it helps.

  Open the troubleshooting Windows Media Player settings Troubleshooter: http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Media-Player-Settings-troubleshooter

  Method 2:

  This problem may occur if the resolution requested by the application is not possible by two display devices. Typically, this means that the application can request a resolution interlaced, but one of the two screens is unable to support the required screen resolution.

  Refer to the steps in the following Microsoft article.

  Windows Media Player cannot play this DVD because it is not possible to activate the analog copy protection

  Keep us updated on the status of the issue.

  I'm having fun not fast! I'm a fool. I downloaded an upgrade to 7.7.4 (I think) and it solved the problem of home videos. I still have to start the DVD player. Thank you much for the help. Giaour

• M4V will not play after the update of the Sierra

  I have a number of m4v files that will play is more in quicktime or iTunes after my update for Sierra on my MacBook Pro and iMac. The audio plays fine but the video freezes on the first few frames. I have no problem with those files previously.

  Any suggestions please?

  I have a similar problem as well. Some of my m4v files appear as a blank page with a folded corner icon. They will not play in anything other than VLC player. When I try to play them in iTunes the move, and he said LIVE. When I move the files to an older operating system (El Capitan), they play and correct appearance.

• Flash animations will not play after the flash update

  Hello

  It's really weird, but flash animations on most sites (sites like Ustream) will not play after that I updated the flash player. The funny thing is that on youtube play very well. I've tried disabling the addon of shockwave, relocation, etc., but nothing works. This problem is with firefox only because as the Chrome and Explorer the flash player works fine.

  Thank you.

  Thank you. In fact, it was not necessary because I have disabled protected mode flash and who did it. However, seems like it is not the best option but average tiem, I guess I have no choice.

  Thank you.

• the song plays on laptop, loaded on the player, but will not play on the device

  There are about 80 of the 480 sogns I have synced my clip that will not play either.  they play fine on my laptop and win 11 med says that they are on the device.  what the hell's going on and can you tell my why Back in Black will not play while Thunderstruck (from the same cd I own) has no problem?

  Try Reripping the files in MP3 format.

• serious discs will not play on the cd player or car drive?

  When I burned a cd of music with windows media player, the disc will not play on my cd player or car player! Help!

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-sound/burned-CDs-will-not-play-in-CD-player/48cecc76-0A15-4c16-952d-f388244387f9

  See the response by Diana d.

  Tom Ferguson

• Video of Smartphones blackBerry will not play since the 4.5 upgrade?

  I upgraded to 4.5 a few weeks ago (with T-Mobile 8320 curve) and all of the videos that I try to put on my phone now in WMV, AVI, format etc. will not play.  Either I get a red error box saying the file is incompatible or she acts like she is going to play, but he won't play.  I've never had to convert WMV before playing on the previous operating system for the phone (4.2.2), they always played!  So I tried converting them with the Media Manager, some won't still play, and those who have a black border around the video where almost 1/4 of the screen is blank with no video (and Yes, I have 'full screen' selected).

  What is the problem with the video and 4.5?  What file formats does work now?  I don't understand why they took the opportunity to read these formats.  Always be a problem with everything these days...

  I tried AkmeFFmpeg and it worked like a charm... full screen and everything!  Very strange... I tell you it's the OS!  I've never used this program before when I got 4.2.2 and I never had problems.  But whatever, problem solved now.

  Thank you.

• Audio video will not play on the timeline

  I use Adobe After Effects CS5.5, whenever I have a video in the timeline, it will play the audio of the video. Even if I scroll or a preview, the audio will not play until I made out. How can I fix?

  How do you do a preview? If it's with the space bar, you're hurting.

  You start an audio overview by pressing. on the number pad and you launch a RAM Preview (including audio) by pressing 0 on the numeric keypad.

  Looks like you're new to AE. You will need to take a step back and Start here.

• Simple animations 3 images will not play in the browser preview

  I'm new to this game, just trying to understand the best platform to create EXTREMELY SIMPLE rotations and sign minor animations for HTML5 ads.

  I did a test with 3 images of solids, just their animation to each out fad at one point and now it will not preview in the browser correctly - it shows just the first image as static.

  I'm sure I'm missing something extremely stupid and just can't find it. Help! PLEASE, I BEG YOU!

  Check out my old tutorial but the principle still applies.

  Targeting of the symbols: discovering the mystery l EdgeHero