DVD writer is recognized but cannot burn files

Similar Questions

• Satellite A80-129: Mat * a DVD - RAM UJ-830 s cannot burn DVDs

  MODEL: SA80-129
  DVD RAM TYPE MAST * A DVD-RAM UJ-830 S
  SYSTEM: WINXP
  SOFTWARE: NERO

  (1) DVDRAM CAN READ CD AND DVD EASILY, IT Burns CD WELL, BUT cannot burn DVDs, IT SHOWS: G:\ IS NOT ACCESSIBLE INCORRECT FUNCTION, UNTIL IT WORKS WELL. the blank dvd is not a problem, before I used even type a blank dvd to burn.
  (2) even allow the recoding in the properties, the properties shows the Virgin dvd 0bytes.

  all PROMTLY ANSWER would BE MUCH APPRECIATED.

  It doesn't sound good.
  I had a similar problem of combustion and the end of the story, I replaced the drive ;(
  However, try to remove the drive from Device Manager, and then again to restart the operating system should recognize the device again.
  Then you could check if it able to burn the DVD s s.
  I think you should also try burning different DVD media.

  I have visited many work sites and the reader, and especially the calibration lens malfunction could be responsible for burning problems.
  This could be a worst case and in this case, the replacement is necessary.

• Have downloaded video 40mins Humax box flash drive, then to Windows Media player, I can play but cannot burn to DVD, HELP please.

  As it is said above, why can I not burn on a DVD + RW 4.7 GB.

  This problem happened to me before, what program did you use to burn DVDs, windows media player can only burn songs on CD/DVD, not work for video files. You can try another call convertxtodvd DVD burning program, it solve my problem, and here is a guide step by step on How to use it to burn videos to DVD to play on DVD player. Write me if you need another Assistant.

• Equium L20-264: CD/DVD player can read but not burn discs

  Hi all

  I need help. My laptop cd/dvd driver does not recognize the discs inside. It only happens when I try to burn a disc. She can read but not burn the discs. What could be the solution? I tried different brands, the last time it was Maxell. The manual suggests Mitsubishi discs, but I'm not sure that it only works with the Mitsubishi discs. It can read any kind of disc.

  So I'm in trouble, please help.

  THX
  Gabor

  Hello

  In the manual, you will find a list of media recommended because this media has been tested and were working properly.
  However, I use TDK CDs and DVDs and it works as well.
  Juan suggested in another ad that sometimes 3rd applications or DVD copy locks are responsible for some driver problems:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=12497

  What I mean is that it is not easy to give a generally the solution of these problems.
  You should try different media, burning software and if it doesn t work so it s is a malfunction of the equipment. In this case, you will need to replace the drive.

• Cannot burn files in WIndows Media Player: 0xeb020688 error code

  original title: 0xeb020688 error code

  Windows media player cannot burn the files if the burner is busy waiting for complete the current task. If necessary, check that the burner is connected properly and that you have installed the latest device driver.        This is the error message when I try to burn a cd. Ive, run the troubleshooter a couple of times and always the same.  tried a different software.  same thing

  See if that helps,

  http://social.technet.Microsoft.com/forums/en/w7itpromedia/thread/1d2cc429-D640-426C-bb3e-64996ddce3a6

• Cannot burn files to CD/DVD more? (Windows 7)

  This problem is everywhere on the internet but I have yet to see a solution that is tailored for someone else to do a system restore that is not an option. I burned the files on my internal drive by dragging and dropping them in the folder to the blank disc, then click on burn. A few months ago I went through the process as usual (insert a blank disc, he asks what I want to do and I choose to burn cd, it opens the folder to the blank disc) but when I went to drag and drop the files in the folder to the blank disc, nothing happened. I dragged and when I released in fall, they do not appear in the burn list.

  (1) I tried to use Windows Media Player instead, and I couldn't also do drag or drop files in the burn list here.
  (2) I tried selecting the files, then click on burn instead of drag, and they still do not appear in the burn list.
  (3) I got our admin check user for burning strategies and burning has been activated. We disabled and then enabled again just in case and still no difference.
  (4) I have not download or install something new on the computer or bring other changes to this computer before what is happening and neither did my admin, there may be something that we did it. The only changes that the computer would be crossed before that happens are automatic updates of windows.
  (5) it is not the disks. It does not work with the same discs I have always used so I tried six different other, different brands, and the behavior is the same only they are all burned fine on other computers. It also does not matter if I am on CD or DVD.
  (6) it is not the drive. When my admin logged into his account on my computer, he was able to drag and drop and burn as usual it seems there is something to do with my profile specifically.
  Any suggestions?

  Hello

  Thanks for posting your question in the Microsoft Community forums.

  The computer is connected to the domain network?

  If the computer is connected to the domain network, the question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

  Hope this information helps you. If you need additional help or information on Windows, I'll be happy to help you.

• Re: Satellite A200 - DVD player can read but cannot write

  Hello

  Some time ago my DVD writter has stopped working. I have Windows 7 with the latest toshiba drivers.

  The DVD is very good playback of the inserted cd/dvd, the unit is OK in Device Manager, but when you write a DVD it fails somewhere over 50% with "unknown error."

  I tried Nero and standard windows app.

  What do you recommend?

  Hello

  Did you test different DVD from different manufacturers?
  I had a similar problem in the past and since I use TDK R DVDs and CDs and these discs work correctly.

  I also recommend cleaning the DVD player with alkohole laser lens and the tip of the batting.

• Satellite P20: Device DVD Player reads only the DVD but cannot burn CD & DVD

  Hello

  I have a toshiba P20, and I'm having a lot of problems with it. One of them is my DVD UJ811. I don't really know what is happening, the drive was already replaced and a few weeks later, it was exactly like the front, and the service provider made me pay almost 70EUR for a budget of 400EUR rejected.

  I would like to know what really should do, I can't read the CD and I can not burn CD/DVDs, I can just read DVDs, nothing else.

  I have seen some forums on the net, too many people in the world has the same problem I have and I really need to know what is the best solution for me.
  Thank you

  Hello Rafael

  I'm very surprised by your post it here because I've used Satellite P20-303 (a red) about two years. Laptop is now used by my brother and it works perfectly. I don't really know what problems you have, but I never noticed anything suspicious. Up to now I removed the cooling Grill on the bottom twice to clean the unit, and that's all. After that laptop computer cleanup runs a lot more quiet then before.

  Back to ad: I have to be honest and say that I traded with TEAC DV - W22E DVD - rom. original drive was DVD - RW and TEAC DV-W22E DVD-RAM. My brother use it pretty extensively, but until now there is no problem at all.

  I don't really know what the service is doing, but if possible replace the drive TEAC one. I can tell you with certainty, it works very well. Moreover, according to the description of your problem, I am sure that the drive is faulty.
  You can replace one. It's very simple to do.

• DVD writer detects cd but not dvd

  My HL-DT-ST DVD - RW DL DVD on my Dell XPS400 burner has stopped recognizing DVD + r Discs. It won't read DVD + r discs that I have previously Burn successfully. Discs that I've already burned can still be read from my dvd player.  But not the burner.  When I start Roxio Creator Dell edition IO and insert a DVD + R disc, it says 'no disk in drive '.  If I insert a cd + r it shows I have 650 Meg of space and I can burn with success.   I did a system restore to return I can go without change.

  Concerning

  Pawgy

  
  

• Latitude D610 - able to read discs, but cannot burn

  I have a laptop Latitude D610 I use for business purposes.  Once a month I have to burn word and Excel files on a disc to send to our customer.  Last month I went to burn and the drive is no longer burning the files to a blank disc.  I tried several discs, I also tried to reinstall the drive.  Today, I replaced the drive with a laptop replacement, we have on-site.  I'm still not able to burn.  Most of the time it will not detect a disk if the disk is empty.  Discs with the media are read without any problem.  Any ideas?  I want to get this working so I can't keep my boss for burning the computer loan.

  Latitude D610

  Windows XP

  CD-RW/DVD-ROM Dell Part #8W007-A01 (supplied with the machine)

  Managers of device says its working properly

  When I click on the drive with an empty disc, I get the message next - D:\ is not accessible. incorrect function.

  All other discs with media work very well.

  Message edited by cgillen on 03/26/2008 09:28
  
  

• 2012 NAS server set full control for the Admin user, but cannot add files

  Hi, I'm new on using Server 2012 (or any server operating system). I created a shared folder by using the files and storage, quick profile SMB services. I set the administrator with full access account. I added also a group of users with reading and only execute permissions, the administrator account is not within the group.

  I have the drive mapped to my desktop running Windows 7 Home. I use administrator credentials to log on. I try to add files through the mapped drive, but does not have my permission to create or copy files ("you have authorized to perform this action"). I can't that speculate that the problem is caused by the run as account on my desktop do not match those of the server? Any suggestions on fixing this problem?

  Note: I created a separate administrator account and a group on the server with a control total and still not able to add or modify files on the network drive,

  Hi Sheener,

  Thanks for posting in the Microsoft Community.

  The question you posted would be better suited in the TechNet Forums; We recommend that you post your question in the TechNet Forums to get help:

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• I am trying to get the photoshop plugin (Theta) for Gimp but cannot opn8BF file (.8bf)

  I try to get the profile for photoshop Gimp but I get messagae that windows can not open this type of file.

  File 8BF (.8bf)

  What I'm trying to do, is make clothes of SECOND LIFE avatar.  For "fake bake" clothing below I'll include the link of video tutorial that indicates what tools are needed and the links he gives

  Also, I am on WINDOWS 7 (os)

  http://www.YouTube.com/watch?v=-scy5oDcyx4

  Normal maps:
  http://MediaFire.com/?zdnjmtufjmy

  http://RSC.ANU.edu.au/opensource/Inde...

  http://www.mediafire.com/?u64hagd12qv.

  Hello

  -Have there been recent changes made on the computer before the show?

  If you have 64-bit Windows, please follow these instructions to install plug-ins in Photoshop:

  If you use Photoshop CS4 - CS6 64-bit on Windows 64-bit:

  a. copy the files with the ending _64.8bf in the plug-in folder of Photoshop CS4 - CS6. For example, to add the coloring plugin for Photoshop CS5:

  b. copy Coloriage_64.8bf into the corresponding folder C:\Program Files (x 86) \AKVIS\Coloriage in the Photoshop Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit) \Plug-ins\

  c. then re - open Photoshop and check how the plugin works.

  If you use Photoshop CS4 - CS6 32-bit on Windows 64-bit:

  a. copy the files with the .8bf ending in the plug-in folder of Photoshop CS4 - CS6.

  For example, Coloriage.8bf to the folder C:\Program Files (x 86) \AKVIS\Coloriage corresponding to the Photoshop Plug-ins folder: C:\Program Files (x 86) \Adobe\Adobe Photoshop CS6\Plug-ins\

  b. then re - open Photoshop and check how the plugin works.

  Note: If you set the additional Plug-ins folder in Photoshop (using the command Edit-> preferences-> Plug-Ins), to add the path to a folder with plug-ins in Photoshop 32-bit on Windows 64-bit, you can get an error from Photoshop, it does not know this kind of file. Happens if the record contains a plug-in 64-bit. Photoshop 32 bit try to download, but may not recognise.

  To remove this error message just remove the 64-bit file in the folder used as the additional Plug-ins folder in Photoshop preferences. If you are using Photoshop 32 bit you need not file 64-bit.

  For more information, see the links.

  Troubleshoot plug-ins | Photoshop CS4, CS5

  The names of files and file name extensions: frequently asked questions

  Please post back with the results and we will be happy to help you further.

• External hard drive is recognized but cannot see the content

  My external hard drive PX1393E - 2 32 is identified as removable media, if I connect it with my laptop. But there is no possibility of access. Size is shown as '0' and you can't see the content.

  I work with Windows Vista Home Premium SP 1. I tried to use the hard drive with a second computer (also Vista): same problem. If I connect the hard drive with a laptop that works with XP, I can see and use all my data.

  Drivers and the operating system are the last level.

  Does anyone know a solution?

  (I ask forgiveness because of my bad English.)

  Hello

  You can see the size of the HARD disk in disk management?

  Normally the external HARD drive should also work on Vista if it works properly on your XP computer.
  You use different cables? Maybe you should try other on Vista laptop.

  In addition, I would recommend formatting the HARD drive again. It's maybe something s wrong with the structure of the partition.

• Can't burn files to DVD, error: "Media is not recognized.

  Original title: cannot burn files to DVD

  I am running Windows XP. I tried to burn different files on discs DVD new (e.g., Imation DVD - RW and RiData DVD + RW). I tried using Easy Media Creator 9, AShampoo Burning Studio ^, a Windows Media Center to burn my DVD discs (especially JPEG photos). In each case, I get the error message that my "media" are not recognized. This player will play music but it not "burn" my photos. Help, please!

  Hello
   
  1. what type of DVD burner do you have? Is this a DVD burner with capacities of reading and writing?
  2. have you ever burned a DVD using this DVD player in the past?
  3. are you able to burn the CD?
  
  Method 1.
  To diagnose and repair problems with your CD or DVD drive when trying to read or burn media automatically.
  Reference:
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems
  
  Method 2.
  The article below describes how to troubleshoot common problems that may occur when a Windows XP-based computer cannot read a CD or a DVD in a CD or DVD drive. This article contains several methods that you can use to try to solve these problems, and it also includes some advanced troubleshooting steps.
  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD
  http://support.Microsoft.com/kb/321641/
   
  See also:
  Windows XP CD Burning Secrets
  http://www.Microsoft.com/windowsxp/using/Setup/learnmore/bott_03september16.mspx
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• CARPET * a DVD-RAM UJ - 841S: cannot burn DVD/CD more

  Hey people,

  I have a problem with my DVD/CD drive, I can't burn files more. My CARPET * a DVD-RAM UJ - 841S can always install things of CD and erase DVD/cd but I can't burn more.
  Anyone know how I can fix this problem?

  cordially Egbert

  To me, it seems that the lens of the drive can not calibrate correctly
  The bed or write drive before the middle of the lens is calibrated in the right position.
  If it fails, the drive is not able to manage the CD or the DVD.

  Usually nothing help to wait for disc replacement

  Oh wait maybe a cleaning the lens help
  You can try to clean the lens. You can use a lint cloth