DVI PCI Card/s for G3 minitour

Similar Questions

• Card PCI-E graphic for Dell Optiplex 755 SFF

  Hi all

  I have an Optiplex 755 SFF 275W PSU and PCI-E video slim with.  Graphics on this series are awful - video DVD playback cannot without jerking.  I spent a few hours trolling on the web trying to determine which video card will work in the 755.  The general consensus of the 'guaranteed' card is the Radeon HD 2400 PRO.  So, I managed to follow a fact (after trying a 5570 & it not even leave the PC start), had shipped here and installed.  To see that it does not too leave the PC startup.  So typical of Dell to make the PC which are incredibly limited.  What is the point of having a PC capable of running Win 7 (will have 8 GB of DDR2 RAM, has currently of 2 GB and currently has a Dual E6550 - core 2.3 Ghz CPU) when he cannot take a card even modestly spec'd?  This is the last time that I buy Dell.

  Anyway, having spent the mug shot (ah, much better, thank you)-why the this junky 755 will only take the so-called "guaranteed" HD 2400 PRO?  When I try to start it up, it not this stupid pre-start high ramp / down fans, then turns off, try again, then turns off, then on the 3rd go fans just go hard on & stay like that for as long as I care to leave.  If I take the HD 2400 PRO on & put this stupid DVI adapter card in the PCI-E slot, it's all good.

  No changes have been made to the 755 - it's just a standard stock machine.  If for some bizarre reason, all others using the HD 2400 PRO with the 755 SFF tell bald-faced lies (that is, they are not really using a HD 2400 PRO at all), what are the other maps?  I see that the motherboard has "25W" appear next to the slot PCI - E - but the HD 2400 PRO is rated at 25 w max.

  Buy the 755 was supposed to be an inexpensive way to make a living desktop PC.  I don't want to lose more money on cards that don't work.  And the HD 2400 PRO was relatively expensive for such an old map, obsolete (crazy NZD$ 42 - when a 5570 is only NZD$ 65).

  Any help / constructive suggestions appreciated.

  You can change. Click the Green pencil. But I already have to remove both blasphemous words.

  The 755 came in four different chassis sizes. You have chosen a smaller with the smallest power so you don't you. Here are valid Dell Low Profile PCI - e 16 X for this chassis - video cards
  DR280 ATI Radeon X 1300, 128 MB, DVI, TV-out
  JW592 ATI Radeon X 1300, 128 MB, DVI, TV-out
  KT154 ATI Radeon X 1300 Pro 256 MB, DMS-59
  JJ461 ATI Radeon X 1300 Pro 256 MB, DMS-59
  XX347 ATI Radeon HD2400 Pro 256 MB, DVI - I, TV out
  YP477 ATI Radeon HD2400 Pro 256 MB, DVI - I, TV out
  CP309 ATI Radeon HD2400 XT, 256 MB, DMS-59, TV out
  XX355 ATI Radeon HD2400 XT, 256 MB, DMS-59, TV out

  Call 1-800-357-3355 Dell spare parts and ask for the part number.

• PCI card dual band for Satellite C660

  Can Hello, please someone suggest any card PCI dual-band for Satellite C660

  Thank you

  Is something wrong with WLAN card internal laptop satellite?

• PCI cards with USB 3.0 or eSATA for a Mac Pro 2006 (1,1)

  Hello, Apple people!

  I got my hands on a Mac Pro 2006 earlier from a friend. I used it as a BESTIAL Server (seriously, this thing is not so much as breaking a sweat even when I throw it the more difficult task.) I love this machine) since I got it, and I think I want to do the updates. My plan so far is to get multiple mounting OWC to pick up the second drive Bay currently vacant DVD and install two 120 GB Samsung 850 EVO drives in RAID 0, while using the real HARD disk bays for a RAID 10 array (nested RAID: two RAID 1 arrays brought together in a RAID 0 array) of four 2 TB red WD drives and use two 250 GB hard drives currently in the machine in an external case in a matrix RAID 1 for backup. I'm pretty happy on this issue.

  My question concerns what interface to use for external drives of 250 GB. I can use:

  • USB 2.0 currently on the machine
  • FireWire 800 currently on the machine
  • a PCIe USB 3.0 card
  • a PCIe card with eSATA

  That we will get the faster speeds? I know that, theoretically, eSATA would get faster speeds (6 Gbps eSATA vs 5 Gbit/s USB 3.0 vs 800 Mbps, Firewire 800 vs 480 Mbps USB 2.0), however I know also (maybe?) that the Mac Pro I have only has grooves in v PCIe 1.1, with a (supposed) 250 MB/s maximum data transfer rate. would this bottleneck a PCIe USB 3.0 or eSATA card not worth?

  Note: don't worry all "Mac compatibility" with PCIe cards (or the table RAID scheme I mentioned). I am running Ubuntu Server (64 bit) on the machine, and given that the Linux kernel supports much more conductive than Mac OS X, I probably don't need to look at all the other drivers. This issue is specific to the hardware capabilities of the Mac Pro.

  Probably the most simple installation, you can do is to install the eSATA extender cable adapter.

• Synchronize the clocks of 2 PCI cards for analog inputs with e/s digital reference

  I'm trying to synchronize the clocks of reference of 2 PCI cards so that the analog inputs are synchronized. However, my appilcation has also digtial e/s on two cards, and who apparently made the mistake DAQmxErrorResourcesInUseForRoute_Routing. This discussion describes a similar problem, but the solution was to just put the reference clock to the slave device, who had no other tasks running on it, so what mine does.

  Is there way I can synchronize the clocks of refernce without interfering with the digital I/o?

  Thank you!

  PS: My application is in C++.

  The reference clock is really a lower-level component that is shared by all resources on a given device.  All tasks on a given device must use the same reference clock.  So if you use DAQmxSetRefClkSrc for a task, you can use it to set the same value for your other tasks.

  Best regards

• What is the correct USB 3.0 PCIE card for Z800?

  I am looking to buy the correct USB 3.0 PCIe card for a Z800, but I can't find any HP thru. Anyone has the info > 12 and 60 cards HP dollar on EBAY, but I don't know if those who are good.

  Hello

  Based on the following specifications, the machine has a lot of options:

  http://h18000.www1.HP.com/products/QuickSpecs/13278_na/13278_na.PDF

  You can buy 1 port card, map 2 ports, card port 3 or even 4 ports card such as:

  http://www.StarTech.com/cards-adapters/USB-3.0/cards/2-port-PCI-Express-SuperSpeed-USB-3-card-adapter~PEXUSB3S2

  You should check the slot to get the support of the card right.

  Kind regards.

  PS eBay is another story, you can buy some card dollars.

• Fix for PCI cards ESXi 5.5 using areas PCI Passthrough memory less than 4 KB?

  Hello!

  Did anyone know when the fix for ESXi 5.5, which has problems with PCI cards that use areas of memory less than 4 k, as described here https://communities.vmware.com/message/2351080#2351080, will be available?

  
  Thank you!

  Yes, the fix for this problem must be in ESXi 5.5 U2.  Let us know if you encounter any additional problems using PCI Passthrough with your device.

  Thanks for your patience,

  --

  Darius

• need express pci card with firewire port laptop brand new

  My wife has just bought a HP Pavilion model h8 - 1260t with Windows 7 64 bit.  She has a 30 "monitor film screen, which requires two USB ports, a DVI and Firewire 1394 port.  The new computer has no firewire port anywhere, but when it is opened, we see there are three slots PCIexpress available.  There are PCIe cards available 1394 (such as Rosewill PCIe model 3 Ports 1394 b RC-506E, as seen at http://www.newegg.com/Product/Product.aspx?Item=N82E16815166027), , but there seems to be a wide variety, and I don't know which to buy.

  I am concerned about what transfer speed to get (I don't really know; is good enough 800Mbps?) and what power connector on the card (I want to be sure we have a power supply compatible plug) will take place, and I don't know the difference between 1394 and 1394b, or even if it makes a difference.  I can't just take the card out of the old computer because the firewire port is connected directly to the motherboard, and I think that the old computer is still pre-PCIexpress

  The monitor is very good and quite expensive, so we really do not want to have to buy a new screen after spending so much on the computer.  I thought I had checked for compatibility with everything, but I guess I missed the requirement of firewire.  We spent almost all day today trying to get help in various stores, but nobody seems to be able to help.  We had to buy the computer online because there is no good nearby computer store, so I want to do ot I do not another mistake and end up buying two or three cards until I find myself on the whole correct.

  Thanks a lot for any help

  Hello

  If you cannot find a molex connector 4 unused and then look for a connector used 4 pins.  I would certainly find an adapter in Y for you.  The other option is to use an adapter SATA Y more than molex and tap into the hard drive power cable, or even use an unoccupied SATA power port.

• Satellite A30 - 303 install wireless mini PCI card internal

  Hello
  I am installing a PA3300U (Atheros) mini PCI WiFi internal card and have a basic question that I hope someone will be able to answer. There are two cables, white and black (under the cover of the wireless card on the case) which I suppose are for the internal antenna. The question is where do these attach to on the mini-PCI card (unfortunately I have no instructions for the card mounting)?
  I'll be very grateful for any assistance with this.
  Best regards, Dave.

  Hello

  I don't actually see one of the Atheros cards, but on other brands, there are two connectors that are marked with the HAND and to THE.
  A white cable normally goes to the HAND and a black to the auxiliary voltage

  BR

  Tom

• Lack of Win98SE PCI/Sound driver for Satellite Pro 4270

  Hello

  I have an old Satellite Pro 4270 with Win98SE license.
  I have no driver CD and only a Win98SE installation CD. So I installed Win98SE.
  From Toshiba Web site show me a lot of drivers for Win98SE which I installed.

  But I have not found a driver for the PCI card that has a yellow "?" in the Device Manager. I do not mean the PCMCIA slots.

  I installed the driver of his Yamaha DS - XG, but I can not here any sound.

  So where can I find the PCI driver and sound driver better.

  John

  Great! :)

  Thank you for your comments.

• Startup gets "Network cable unplugged" on (new) wireless mini-PCI card

  Repost in the previous topic was locked, but has not been resolved. Original post below, please see previous post for more details

  I recently installed a Netgear DG834GT wireless router and now have intermittent problems connecting my Tecra 9100. If the 9100 has been off for awhile (like overnight), when I restart I get always "Network cable unplugged" for the wireless connection. Reboot several times (anything from 3 upwards) I finally get connected to the router and everything then works fine for hours. Even a quick restart at this point (that is, once that the wireless adapter is connected) does not cause a problem, but as soon as I leave the stop of the machine during a time he fails again on restart.

  There are no errors in the event log.

  I am using wireless mini-PCI cards and have already updated to the latest version of the driver.

  Any ideas gratefully received, for now every morning is a 20 to 30 minutes of rebooting frustration trying to get my connection work.

  (Running Win2K professional)

  Hello

  I have the same problem if I stand for laptop and access point at the same time. If the access point is already in use, the connection is established shortly after. First the access point must establish a connection to the modem. Now the wireless connection is not available.

  I guess after the second reboot, the connection between the AP and the modem is already finished and you can use the network wireless successfully.

  Good bye

• Satellite 2450-101 Mini PCI card please

  I have a Satellite 2450-101, which is longer under warranty. I upgraded the memory and noticed a mini-pci slot with two waiting for a card antenna cables. I need a g card (the 3300 looks like a good bet). The manual refers to a mini-pci slot and the CD from the laptop comes with Atheros drivers for the same... I am currently using a PCMCIA card but want to spend money with Toshiba to get a good onboard solution. I called Toshiba who say that he is not a slot in my laptop... Please please don't refer me to a partner because I've never actually talked to one yet. Honest answer please... can I mount a mini-pci card... is the 3300 OK, and how do I join the cables (if this is difficult, I won't)...
  Thank you

  Hello

  I found information that your device is ready for the Mini PCI Wireless card. As you know on the wireless card there are two connectors that are marked of PRINCIPAL and auxiliary normally a white cable goes to the ESSENTIAL and a black to the auxiliary voltage

  Sorry, but I can't tell you exactly what wireless card will be the best for you. In my opinion, you should contact partner in your country. I'm sure they can give you correct information, which is compatible with your device and how much it will cost.

  Good luck!

• A30-151 Mini PCI card Possible?

  Hello everyone, I have a Satellite A30 151, which says that the manual site and toshiba, is capable of receiving an internal wireless Mini PCI card, the site lists even more compatible models(PA3300U-1MPC). However, I rang Toshiba support they said initially the cell phone was not compatible, but seem to display of their minds and say that the site must be right. Has anyone installed one of these cards for an A30 151? I opened the slot of the wireless card, it has a slot, but no antenna wires that I could see, swich wireless is also absent. I would really like to know if this laptop / card are compatible and if I would be able to adapt or if he has to go to a Toshiba Service Center? Please help if you can. Thank you.

  Hello

  Toshiba Support gives you the right information. You can use Wireless LAN Mini PCI Card (802. 11 b / g) PA3300U-1MPC.

  Don worry on on/OFF switch. You can turn on/off in Control Panel > network connections.

  If your laptop is not is not more than two years, it will be best to contact the Toshiba authorized Service partner.

  Good bye

• ? PRO/Wireless mini PCI card will switch

  This question has been posted before, but I have not found a solution

  I have installed a PRO mini-PCI card / Wireless 2915ABG in my A30. It is recognized as a card very well, but I can't turn it on. Not with the switch and or the software.

  Any tips?

  Hi rothirgo,

  As far as I know Satellite A30 series is built with Atheros and Agere wireless card. This means that Toshiba has been test machines with just these two cards and do not support another manufacturer of the WL card for this machine. If you have the Intel card and good driver, it should work too.

  Is in the device, a problem Manager? When your card has been properly installed, go to control panel > network connections. If there is Wireless Network Connection showed that it should be enabled.

  If you do this, you can now search for available networks in the wireless network connection properties.

  Just one last question. You have wireless on / off switch on the left side of your laptop? What Wireless Card on FN + F8 check if there is an answer.

  Please let me know what you have done and are there any error messages.

• Pavilion P6520F: p6520f driver usb 3.0 pci card

  To make a long story short, with assistance from HP Support Forum's, I've recently restored to my Pavilion P6520F leave an 'upgrade' forced Windows 10, back to Windows 7.  Unfortunately, when I accidentally upgraded to Win 10, my card usb 3.0 pci card decided to die in the transition (not compatible with Win 10).  I replaced the card with a PCI-E DEGOL Express USB 3.0 Card 4 Ports and power connector 4-pin 5V for desktop computers [ASIN: B01FUE7IS2].  The map loaded and worked like a champ... Until I started Windows 7.  Now Windows 7 can not find a driver for it, and provided driver disk will not load a driver for Windows 7.  I contacted the seller, and they assured me that the card must be compatible Windows 7.  Is there a generic driver online of these cards USB 3.0 can I load to bring back my new card?  Unfortunately, I threw the old card, if I can't relive the Degol map, I'll have to buy a new card.

  All advice appreciated!

  Hello

  USB for Windows 7 drivers are the supplies made by the manufacturer of the card.

  You must debug the problem if the DEGOL W7 driver does not load. Generally, you will see an error code in Device Manager for your USB card. This could give you some advice.

  HP is not post drivers for third party material.