DVI to Vga signal

Similar Questions

• C60 DVI input 3 Auto Detect using a DVI to VGA splitter

  Hello

  We install a codec C60 using a splitter DVI input n ° 3 for the presentation source (DVI - I male to DVI - D & VGA Splitter cable's female adapter)

  The DVI input source is configured as Auto-Detect.  Administrator's Guide confirms this seting automatically detects the signal is analog (VGA) or digital (DVI or HDMI).

  The problem is the codec can't really switch from one source to another.   We do not seek to send two signals at once, but rather stable wether VGA and HMDI will be detected by the codec according to the entry sends the laptop.

  can anyone confirm if this is a limitation of the codec, or bug in firmware or even simply impossible without adding additional hardware.

  see you soon,

  Mel

  Hello

  Yes, auto-detection works for me.

• How to connect the new monitor dvi to vga port

  Today taken a new Samsung BX2240X monitor and it has ports dvi or vga, computer has just vga. Can I use an adapter or a new video card is necessary. Computer Compaq 4010 is a pci express slot on the mobo. The PSU is 220w and the + 12V - 16 Hope a. I gave enough information sure Big Dave will be my response makes a male vga adapter to dvi female, but the PIN to dvi outputs look like mine.

  The best picture would be obtained using a video card with DVI connector.

• U2414H DVI and VGA

  Hello

  My graphics card has only Hdmi, DVI and VGA ports, and I just bought 2 U2414H.

  As I knew that they have no VGA and DVI ports, I also bought adapters.

  Anyway, I can't get it to work. The graphics card does not recognize via VGA or DVI monitors. He does it with the Hdmi interface.

  Is there something that I'm not taking into account, or set up correctly?

  Any help would be appreciated. Thank you.

  DVI cannot convert to monitor the RFP, so no, it won't work.

• No signal found by HDMI or DVI monitor. Monitor detects the VGA signal very well.

  That is the problem. I used to get a signal from the HDMI cable or the cable DVi on my old monitor.  Then, the signal was there sometimes, and then it isn't.  Now my new monitor does not have an HDMI or DVI signal.  He finds the signal to the VGA and that works.  Any ideas?  Myself and a few others have no idea on how to solve this problem >

  Hello, billiardsnut

  You use a DVI or HDMI adapter?

  Assuming you are using a straight DVI-> DVI or HDMI-> HDMI Cable, try to turn off the computer and turn off the monitor, connect the DV or HDMI, then turn them both.

  Some video cards will not dynamically change on its own, following the steps above will generally establish the proper output.

  In addition, since you mention on your old monitor that it is intermittent, it might be that the digital (DVI/HDMI) port on your graphics card is a failure.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Two DVI to VGA monitors

  I have two new VGA monitors.  My HP Pavilion has two DVI ports.  2 DVI adapters using the pc VGA only sees one of the monitors.  The other displays 'no signal '.  Read the other posts, I see that convert VGA DVI - D, but one of my DVI ports works fine.

  When you request support, please provide the number full name or product model of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The above requested information on the side, back, or bottom of your computer. , Please do not include your serial number. Please enter the product/model information in the HP Online Support page for consumers , and/or post it here for our review.

  If the back of your computer is similar to the picture below, there is a DVI - D (digital onlt) output and a DVI - I (digital and analog) output;

  

  #3-DVI - D (digital only) # 4-DVI - I (digital and analog)

• The DVI and VGA outputs are contradictory

  Output:

  VGA for monitor

  DVI to TV

  Monitor works fine until the DVI cable is connected, then you lose image on the screen and it goes to peak w/out office icons.

  That's what I call starnge!

  Try disconnecting the VGA monitor and plug only the DVI to HDTV. What is displayed on the screen?

  Lose the image of the screen on the monitor when HDTV is connected should not happen. The image of the bureau only with no icons on the HDTV, indicates that HDTV displays an "extended desktop".

  As already said, try to update the driver AMD Radeon HD 4000 Series.

• U2415 Display Port DVI adapter - no Signal

  Hi - I have a new U2415 that I'm not getting a signal on when I plug it into my office with a Display Port to DVI.  This is an active adapter that I bought on Amazon.  I have the adapter plugged into the port Display Port, then the cable DVI to my PC.  When I try to "detect" to the monitor displays under Windows 7 64 bit I don't see it in there.  I have 3 other monitors connected to my PC using a videocard ATI Port Quad (ALL DVI) and I know that all ports operate as I went around.

  When I plug the monitor in my book of Mack using the Display port cable accompanying the monitor works fine.  I also know the works of DVI cable very well as I tried it on another monitor.

  I also tried a CDM/DVI with another card and it does not work.

  I also downloaded the software Dell Display Manager but it gives an error saying: he needs a Dell monitor supported.

  Any ideas on why the Display port/DVI does not work?  Can someone suggest any other ideas.  I like to keep my current quad DVI video card port as they are costly to change.

  Thank you very much

  A PC DVI video card out can no longer convert to a DP monitor using this adapter. This adapter is designed to do the opposite.
  "Portable active adapter connects a DisplayPort equipped computer laptop or desktop to a monitor or projector with DVI input.

  You need this configuration =
  PC DVI out video card--> DVI converter DP --> DP---> U2415 DP DP cable in

• Windows 7 doesn't detect 2 monitors connected to dvi and vga ports on AGP card

  Windows7. Have a G-Force FX AGP card with a vga and dvi port. Include in annex a vga monitor and a dvi. I get the same screen on both.  Windows 7 does not detect the 2 monitors! Any advice?

  It is not the drivers of FX for win7

• VGA no signal

  What does say when I get the message that says "No VGA Signal"?  Do I need to replace something?

  This means that the monitor is not getting a signal VGA (blue analog video cable) to the computer. It's normal if you use other such (white) DVI video cables and cables HDMI (black). In this case, VGA is not active.

  I would check the video cable from the Tower of the pc to the monitor. If it's the blue VGA cable then make sure it is connected properly at both ends.

  You get no matter what video display when you turn on the lcd screen and the pc?

• HP monitor does not display "DVi signal.

  My HP LP2275w monitor does not display "DVI signal" when connected with a DVI cable (supplied), but when it is connected via a VGA cable and adapter DVI/VGA (both supplied) it works but no BIOS screen. It begins immediately with the logo of the VICTORY.

  I just bought new HP Pavilion 500-158eg, Intel Core i5-4440, with AMD Radeon HD8570, 2GB processor, running on WIN7 Pro 64 b. VGA and another port of the motherboard are initially blocked so I can connect the monitor only via the output HDMI or DVI on the graphics card.

  I should note that on my old machine without a name with the graphic upgrade ATI Radeon, there is no problem and I used the same cable. There was an electric shock that causes the collapse of the motherboard so I can't even re - check on the old machine. I can't verify if there is a problem with the DVI cable because all laptops in our housing have only the VGA output...

  All solutions?

  Concerning

  Disco96, welcome to the forum.

  The specifications for the computer show that they run win 8 64-bit.  Downgrade you for Win 7?

  Here's what the quick reference Guide shows for the monitor:

  Model: (LP2275w) product #: video (KE289A4) standard: (WSXGA +) Native resolution: Aspect ratio (1680 x 1050): (16:10) types of connectors: (DVI - I, (support HDCP) DP) cable/s included: (DVI - D to DVI - D, DVI - I VGA, DP USB,)

  Also, here are the i/o ports of back on the computer:

  Figure 2: Rear i/o ports

• Satellite P100: Can I connect two external monitor to the VGA & DVI port at the same time?

  Satellite P100 comes with two port external monitor. One VGA and one DVI. Can you have two external monitor works at the same time? Can you have two external monitor as well as your internal screen working at the same time (for a total of 3 screen at the same time?

  Here's what I confirm:

  Internal display + display DVI connector
  OR
  Internal display + screen VGA connector

  Is it possible to have:

  Display connector DVI + VGA connector display?

  OR

  Display connector DVI + VGA connector screen + internal display?

  As far as I know, this is not possible and you can use a DVI or VGA port.
  Output signal can be used only a single port for external monitor.

• Vs ATI HD 4650 DVI VGA - monitor attached to VGA not clear - what to do

  Well, I had this problem for awhile now. Seems that it is quite common. Have a desktop HP elite with the ATI HD 4650 Vid. Two better monitors from Dell. The monitor plugged into the side VGA is less strong. I confirm this by changing their and the problem follows the VGA connection (tried both cables also). Yes, is there any use by running the DVI cable down to the video card on LCD with an adapter on the VGA port? I think not because I'd just be using the DVI cable to trasmit a VGA signal. My only solution is to replace the video card by one who has two DVI connectors?

  The series of programs is 10.9 but driver 8.771 depending on the operating system and video card.  Go to the ATI web site for the latest video card driver.  HP is originally on the update of the video card driver.

• Re: What type of video connection has the Tecra A10 - 11I: VGA/DVI?

  Hello

  I'll buy a cable to connect my Tecra to the TV. The manual of the TV indicates that laptop to connect may have a DVI or VGA connector.

  What type of connector the Tecra A10 - 11I there? I can't find this information anywhere.

  Thanks for the help!

  bwprius

  > I can't find this information anywhere.
  It's really strange.
  You have this laptop in front of you?

  All ports are described in the document user s manual, so please open and check the 35-40 pages. You will find explanations for all available ports.

  If you do not have this document you can download it HERE.

• Pavilion h8-1128 w/Radion HD 6750: disables the VGA DVI!

  I run 2 monitors SAMSUNG my h8-1128, which came with a HD6570 of Radion Eyefinity.

  Operating system is Windows 7 Home Premium 64-bit.

  Both monitors are supported by the DVI and VGA inputs. The HD6570 has a DVI - VGA dongle, DVI - I, HDMI and DisplayPort outputs.

  After watching a bit in the cables, I find this cable:

  StarTech.com DVIVGAYMM6 6-foot DVI - I male to male DVI - D and HD15 VGA Male Video Splitter cable

  by StarTech

  Characteristics of the product

  Use the DVI-> VGA dongle on the connector 6570's DVI with a VGA cable to the monitor that is shared with the CATV box, and then either an HDMI cable to DVI or DisplayPort / DVI cable.

  You have reason... that would be the way to do it.