DVI tv connects to the computer laptop hdmi.
Hey guys,.
I need help because my TV display my laptop. My laptop is a HP Pavilion dv4 Entertainment PC 64-bit and has a hdmi port (no vga or dvi port). It is partitioned into Windows 7 (which is my primary OS) and Windows Vista 64-bit (what can I say, retro gaming). My TV actually by JVC and a dvi port (but no hdmi or vga port). I also have a hdmi cable to dvi to connect my two devices.
I tried everything imaginable:
I've updated my display drivers.
I made sure that my TV was on the plug-in software component Digitial parameter (tried all other inputs too and those who does not either).
I tried all the settings in the "Display" section in the Contral Panel.
I tried all the settings in my 'Intel Graphics and Media Control Panel '.
My Fn + F4 options also don't make my TV display my laptop.
I even had my motherboard replaced this year (for a problem of differnet of course).
I tried every resolution of the screen to find one that is compatiable with my TV.
I changed the order in which I turn on my two devices, including when I plug my cable to my laptop.
However, I discover that my Windows Update does not update my windows for some reason any (the update was for a problem with Internet Explorer 9, so it's unrelated)
But here's the strange thing: my TV can display my laptop when Windows starts up. My TV will show the start screen where I decide what OS I want (I usually choose Windows 7) and it will display the Windows loading screen after that. But then it becomes empty when screen dsiplays users. The only thing I can think is that something is leading to the digital output of my laptop once windows loads. I don't know what would make this, so if anyone has any ideas I could really use the help.
Hello
When you connect a new monitor or TV to Windows 7, it should ask you what you want to do with it in a group called "New display detected." It is an opportunity to adjust the settings as you please and turn on mirroring. If you want to adjust these settings later, you just need to go to the start menu and select Control Panel. When the load control panel, click display. On the left side, you will see a few options. Click "Edit settings." From there, you will be able to make changes as needed.
Connect your computer to a TV
http://Windows.Microsoft.com/is-is/Windows7/connect-your-computer-to-a-TV
Run this Microsoft fixit tools and check if it helps.
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-us
Tags: Windows
Similar Questions
-
printer connected to the computer laptop n, t work
I connected my his laptop to HP for my printer. It's a LexmarkX2480. My laptop arrives correctly at printing, but does not print.
Please confirm that you are using Windows 7. What version and the service pack?
Has your laptop computer upgraded to Windows 7 or Win 7 the only version of Windows already installed?
If you upgrade from a previous version of Windows, the printer has been installed on this version? If so, did you uninstall and unplug the printer before moving to Win 7?You have all other printers installed on this computer? If so, can you print to them?
What does that mean?
My laptop can correctly print
What happened when you first connected the printer to the computer?
You get the error message? If Yes, what is the full text, without paraphrasing?
Is there a printer icon in devices and printers? If so, right-click on it and select the Ports tab. Without clicking in the list of ports (you can use the scroll bar or expand the columns by clicking on & drag in the header), which is the 'Port' and 'Description', which is checked and highlighted? Click Cancel to exit the printer properties dialog box.
-
How to set the resolution of TV connected to the computer via HDMI?
original title: new brand lenovo PC, windows 7, connected to my samsung tv with HDMI, screen too large, can not see the button to start clock, icons, etc what do I do?
I have a new computer Lenovo with Wwhat to do? indows 7; I use a Samsung LED tv for a monitor, HDMI connection. The screen is too big for the monitor, I don't see the button start, icons, clock, etc.
Hello
You can see the following article for more information on monitor display problems:
Get the best display on your monitor
http://Windows.Microsoft.com/en-us/Windows7/getting-the-best-display-on-your-monitor
Ways to improve display quality
http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-display-quality
Let us know if that helps.
-
HP Officejet Pro 8600: No Wifi connection between the computer laptop and HP printer
Hi, I just added W10 os for my laptop, I was on os W7, work system very well, my printer is Office Jet Pro 8600, both laptop and printer are connected to my wireless router, but my laptop cannot find my printer, I misplaced my original disc, can anyone advise me on what it takes to please. TIA
Hi @Rockabilly,
I was able to locate the software you're looking for, but from your description, not having is not the software may not be the question. I will first provide you with the software, then if you continue to have problems, let me know and we can go from there.
Printers HP Officejet Pro 8600 Plus and Premium e-All-in-One
E-all-in-one printer, HP Officejet Pro 8600 - N911a
Alternatively, you can also download and run the HP printer install wizard for Windows
The HP printer for window installation wizard was created to help users download and install the latest and most appropriate HP software solution for their HP printer.
-
Problem with my adapter connected to the computer laptop, perfect if not connected
Hi, its my first post here, had my laptop for about 2 weeks
Whenever I connect my laptop to the power adapter AC that my screen begins to glitch, I see the blurred lines, looks all screwed upward and also it freezes and goes to normal and I see a pop up saying "AMD graphics temporaily works do not" and he would do this constantly. So it works perfectly without any problem screen, I have to unplug the unit at all times. This has been a problem since day 1. I think it is the power adapter. I don't see anywhere of people having this problem
I just put it in a resolution of 1360 x 768 and his fine work with the AC adapter plugged in, weird freaking
-
interruption of the wireless connection with the computer laptop and printer
We have a printer HP6500 we lost the connection Wireless to our Dell laptop. Whenever we need to print to bring the laptop to the floor and connect it with a cable to print. I tried to close the printer downstairs next to the laptop and the router but it would not print wireless. Any other suggestions? Thank you. CK
Hello
Check with HP, their drivers support and online documentation and ask in their forums on any
known issues. As OEM HP is responsible for the good operation of the printer and provided them with
drivers.More than one 6500 printer
http://WWW8.HP.com/us/en/support-drivers.htmlSupport HP & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/Try resetting the printer with the latest drivers.
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
I get very frustrated not being able to make Skype calls on my Samsung laptop (new last November and using Windows 7). Whenever I try to do a video call to someone it disconnects my laptop WiFi. I have to use my phone through the same wifi that works well. I don't understand what is happening on the laptop to get there. I tried to uninstall and reinstall Skype about 3 times. Has anyone else had this problem or could suggest a solution please?
Hi SueDavison,
I understand that when you make a video call via Skype, the internet disconnects.
I suggest you refer to the suggestions of Tamim from the following link.
To make a video call (Windows desktop)
https://support.Skype.com/en/FAQ/FA3681/making-a-video-call-Windows-desktop
Hope the above information is helpful.
-
Original title: HDMI sound
I know that many have had problems, but I did not mine specifically. My HDMI connection was working fine with my laptop HP and m HD tv. I didn't use it for a while, now it is just the video, no audio on the TV. My reading shows the HDMI as a default device, but the sound is yet to come of the computer laptop, even when the volume is turned off on it. Ive read all the reviews and updates of pilot who was old. I don't know what else to do!
Hello
System Restore does not have this long period of time.
You may want to refer to the suggestions in the thread below link and check.
No sound via HDMI output portable computer connecting to TV
I hope this helps.
-
HDMI connection from the computer to the LCD TV has worked once now no signal.
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas: I use Vista. When I plugged the TV to the computer via HDMI, I had the window configure a srceen and respected. It EE work great for a while. Since blocking him off and then try again I don't get a no signal on the display screen, all white.
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
It's the same for me. In my case, re install the video card drivers helped. It seemed that windows update has messed up the drivers.
-
H233H"cable not connected" with the computer is turned off
My H233H monitor displays an annoying blue "cable not connected" when my computer is off or in stand-by mode. Monitor works find out otherwise and all the buttons on the front panel work. But impossible to find a setting that will turn the monitor off when the computer stops sending a signal.
If I unplug the cable from the monitor to the computer's HDMI, should not the monitor eventually fade or go to sleeo? Or will she continue to display this message "cable not connected" blue indefinitely?
Thank you
Well, I realized that it is a problem of Acer monitor with HDMI input.
There is no problem if I connect my H233H monitor with VGA or DVI cable.
Just thought I'd come back and answer my own question if someone ever comes back here with a similar problem.
Good luck...
-
Hai, my ipod shuffle when it is connected with the computer, it flashes orange light. If I remove without light and music. Even I kept connected all day with my laptop for charging. But without success. Is it possible to change the battery?
If the shuffle still appears in iTunes when you connect, you can try to do a restore using iTunes, where the cause is a software problem.
Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support
If the problem reoccurs after the restoration, it's probably a battery worn. Need soldering skills to replace yourself, and iPod shuffle (with the exception of the 1st generation) is very small. Not easy to work on. This web site has repair guides
https://www.iFixit.com/device/iPod_Shuffle
and parts are available from sources like eBay.
Apple 'serve' the shuffle, if it's the 4th gen (current type). Rather than change the battery of your device, you get a replacement unit. According to this document, out-of-warranty fees are $39
Pricing of the Service - The Apple iPod Support
NOTE: If your shuffle is less than one year of the date of purchase, it is under warranty.
The retail price of a brand new 4th gen iPod shuffle, with new headphones, docking cable and warranty of one year is $ 49.
-
I lost connection on the computer like many light wireless wireless router.
I've got three Kindle and a laptop computer, more my PC connected
Original title: I lost my WiFi connection at home in light of the route for the wireless is not lit.
Hi geraldthorpe,
Thanks for posting your query in the Microsoft Community. It seems that you have no internet connection on the computer. We can get this fixed number by systematically. It can be frustrating for you. But, don't worry, we're here to help.
We start with a few questions-
(1) what is the version of Windows installed on the computer?
(2) you are able to connect to Internet via LAN cable?
(3) are other computers at home able to access Internet?
(4) do you get any error code or error message?
(5) have you made changes on the computer?
I would like more information about the issue.
Method 1-
As a general rule, if the wireless light is not on the router means that the ability of routers to transmit wireless is lost.
The router has generally, 4 types of fires.
Power - number 1
Test - number 2
Wireless - number 3
Internet - number 4
Numbered LAN are turned on only if a network cable is connected.
If the computers are connected wirelessly, all the lights except the indicator light should light up.
I wish you perform a reset and a cycle of power to the router.
Reset the router-
You must locate a set PIN size behind the router and press the reset button with a pointed object for 10 seconds. Now, release the button and wait for the lights to come back.
Note If the wireless light is back on.
Power cycle-
I wish that you unplug the router from the power outlet main and plug it back again.
Check if the problem persists.
Method 2-
I would have you look at the article-
Network convenience stores
http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters
Method 3-
I would have you look at the article-
Why can't I connect to the Internet?
http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet
Wireless and wired network problems
We know if you need help. We will be happy to help you.
Thank you.
-
My laptop with Windows XP does not connect to the camera? How can I reconnect these?
I have my camera, a Kodak M1033, connected to the computer by a usb cable. The connection is not recognized. What I can do.
Install the software from the CD provided with the camera. If no CD not supplied with the camera, you can download Easyshare for XP to Kodak support on kodak.co.uk
-
Received my brother in laws laptop cannot connect wireless, although I can of my own laptop. Trying to connect through the new laptop, I do not see even my own network! What I'm missing here? I'm sure it's maybe something simple, but for the life of me! (When my brother-in-law used this computer, he only uses it through dialup (!), he lives in a remote area). With the help of Vista, and when 'Management of connections' I see my network...
original title: cannot connect wirelessHello
· You get the error message?
Method 1:
I suggest you update the drivers for hardware connected to your computer on the Web site of the manufacturer check if it works.
Updated a hardware driver that is not working properly
Method 2:
Also, follow the steps in troubleshooting section and check if that helps:
In the Windows wireless network connection problems
http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows
Check out these links and check if that helps
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-wireless-router
http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network
See also:
Solve problems with computers not appearing is not in the network mapHope this helps
-
printer wireless HP not connected to the computer
My son tried hang our laptop wireless, with no result, since then the printer says not connected to the computer.
Hi sharryn1940,
In addition to Michael post, you can also find some good information at the following link:
http://Windows.Microsoft.com/en-us/Windows7/install-a-printer-on-a-home-network
I hope this helps!
Debra
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think
Maybe you are looking for
-
Hello I have currently a crashed early 2011 MacBook Pro 15 "and have a friend who has a very good condition, as the new Mac Mini 2012 for $300. The Mac Mini has 4 GB of RAM and 500 GB of storage. My MBP has 16 GB of RAM and 1 TB storage. They told me
-
Automatic Windows Update KB2434419 Code 800706BE error
I have Windows 7 64 bit. Two of my updates fail... Windows Live Essentials and nVidia-NVidia GeForce430. Please help me solve this problem. One is recommended, the other optional.
-
HP 15-r029wm: Wireless driver for HP15
I'm trying to find the Win 7 64 bit driver for HP 15-r029wm wireless. It does not appear in the list of drivers. If it comes with another driver. Thanks in advance!
-
If I plug my motorola DSL modem into the internet port on my router, I get no internet connection and I can't access the router config page. If I plug the modem into any other port 1-4, I get an internet connection but no config page. If I remove my
-
How will I receive a valid product code for my microsoft publisher?
I never really had a use for microsoft publisher so far. When I use it ultimately its ask me a key product... I assumed it's lying on the bottom of the laptop, but that doesn't seem to be one. Then I used one on the cd of the operating system, which