DW 2014CC 1.1 build 6981 continues to display a "Server busy" error when you start the application.

Similar Questions

• Build error when you create the Provisioning package picture

  Hi all

  I'm trying to create a master Windows IOT image by using the tool of IDC (imaging and designer of Configuration).

  I created a package of commissioning and using"customization of the Windows Image" to create a kernel ITO image by specifying the configuration previously created package but still get a build error.

  It looks like a fairly simple process, but repeatedly gives the error below. Also, I have not all USB devices connected to the computer, nor are there insufficient memory problems.

  ERROR

  =====

  Progress of the staging: 75%
  Staging failed to: 75% complete
  UpdateDLL: Measurement of results:
  Staging of total time: seconds = 27 (tickcount = 27235)
  Error: imagery! UpdateImage: Failed call to UpdateDLL::PrepareUpdate with the error code:-2145877241 (0 x 80188307)
  DismountVirtualHardDiskByFileName: disassembly image C:\Users\Shridhar\AppData\Local\Temp\8eceab63e9b746c0a9c65848679d56eb.vhd
  DismountFullFlashImage: [0.219] cleanup of temporary access roads.
  CleanupTemporaryPaths: Cleaning of temporary path C:\Users\Shridhar\AppData\Local\Temp\IMG39F3.tmp\.
  Storage service: disassembly of the image in 0.2 seconds.
  Imaging: See Flash.cbs.log and Flash.csi.log for more details.
  Imaging: Performance results:
  Total running time: 00:00:52.7198674
  Time of image creation: 00:00:00.0642425
  Writing FFU Time: 00:00:00
  Battery storage time: 00:00:17.8667874

  Any help would be greatly appreciated.

  Hello

  Your question is beyond the scope of this community...

  Repost in the TechNet Forums:

  https://social.technet.Microsoft.com/forums/en-us/home

  Or MSDN Forums:

  https://social.msdn.Microsoft.com/forums/en-us/home

  See you soon.

• Firefox build 17.0a2 when you start to customize, FF crashes

  17.0a2 build Firefox hangs when you start to customize

  It's the build directly from

  http://Mozilla.debian.NET/ experimental iceweasel-aurora, I'm doing a daily distribution update, when there is a change in the pension, I get it.

  I went into safe mode and the problem was not there. I returned in mode normal and disabled all my Add ons. I restarted each one (with FF) and seemed to have eliminated the problem.

  I can't have his failure...

  Thanks for your help

• When I start the machine, continuous hard drive work for almost 1/2 hour, meanwhile if I open a program, the machine runs very slowly. Help solve the problem please

  I have wndow XP Home edition service pack 3 installed on my lap top. When I start the computer the hard drive continues to work for almost 1/2 hour; Meanwhile, if I open IE, or any program, the machine runs very slowly and I just can not open the program up until the drive hard light is off. Please help solve the problem

  How much RAM you have on your system? (Right click on "My Computer"-> properties)

  As a general rule, Windows XP does not work well if you have less than 1 GB or more of RAM.  What usually happens is that your RAM capacity is exceeded leading to overflow on virtual memory (the drive) to compensate for the need of RAM in the computer.  This causes your system to beat on your hard drive and slow down your system.

  If this is your problem, the options are to increase the RAM on your system or decrease the non-essential programs that launch at startup on your computer using a tool like Autoruns.

  HTH,
  JW

• Continually, I get an error when you try to update KB968930

  Continually, I get an error when you try to update the following: Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista (KB968930) I tried the solutions provided and it still does not work.  What can I do?.

  Both are optional, non-security updates - don't hesitate to hide them.

• Vista OS does not load. I tried booting and the load screen bar continues to work without success. When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled. Any suggestions?

  Vista OS does not load.  I tried booting and the load screen bar continues to work without success.  When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled.  Any suggestions?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if/before you reinstall:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• After that the effects cannot continue: error when access to the files instead of inside "/ users/dsvp/Library/Preferences/Adobe/After Effects / 13.8.

  After Effects after several months, I now can't launch After Effects without this error: After Effects can't continue: error when access to the files instead of inside "/ users/dsvp/Library/Preferences/Adobe/After Effects / 13.8.  There is no subfolder this Library which is the first obvious sign of something not going.  I've uninstalled and reinstalled twice with the same error and lack of file structure.  I do not understand why a re - install does not create the files and folders needed.

  reset your preferences - http://helpx.adobe.com/after-effects/using/preferences.html

  [moved from the installation, update, & members of Acrobat After Effects]

• After that the effects cannot continue: error when access to the files instead of inside "/ users/me/Library/Preferences/Adobe/After Effects / 13.8", if it please check the file permissions and try again.

  After that the effects cannot continue: error when access to the files instead of inside "/ users/me/Library/Preferences/Adobe/After Effects / 13.8", if it please check the file permissions and try again.

  [Fixed spelling - Mod]

  Go to the folder listed in the path and change the permissions to read/write. Do you know how? It is in the info file.

• I'm trying to uninstall the primary collection of the creative suite 5, but every time I try to do so, a message appears to close the application of google chrome and even when I close the application, the message continues and I can't uninstall. I tried

  I'm trying to uninstall the primary collection of the creative suite 5, but every time I try to do so, a message appears to close the application of google chrome and even when I close the application, the message continues and I can't uninstall. I already tried to shut down the internet, but the message is still

  Check your task for a chrome process manager.

  or restart your computer and start the uninstallation.

  After uninistalling, clean through the use of the Adobe Creative Cloud cleaning tool to solve installation problems

• Error when you try to build the database for the Oracle Fusion Store before D

  I have jdeveloper build JDEVADF_MAIN. BOXER_GENERIC_081002.2127.5156
  I downloaded the FOD_11.zip of http://www.oracle.com/technology/products/jdev/samples/fod/index.html
  When you run the Ant script to create the schema and user FOD, I get the following errors:
  Oracle JDeveloper 11g () (Build 5156)
  BuildFile: D:\oracle\Infrastructure\Ant\build.xml
  
  init:
  [javac] Compiling 1 source file for D:\oracle\Infrastructure\Ant\classes
  
  setProperties:
  
  createDatabase:
  
  refreshSchema:
  
  BUILD FAILED
  D:\oracle\Infrastructure\Ant\build.XML:52: The following error occurred during the execution of this line:
  D:\oracle\Infrastructure\DBSchema\build.XML:91: The following error occurred during the execution of this line:
  D:\oracle\Infrastructure\DBSchema\build.XML:56: The following error occurred during the execution of this line:
  D:\oracle\Infrastructure\DBSchema\build.XML:28: D:\oracle\Infrastructure\Ant\wlserver_10.3\server\lib not found.
  
  Total duration: 5 seconds
  
  Does anyone know what is the problem?
  Thanks for your help.

  I had the same problem until I changed the backslashes in style Windows in the path of the directory to UNIX style obliques, know:

  C:\Oracle\Middleware\jdeveloper

  is wrong, everything in:

  C:, Oracle, Middleware, jdeveloper

  works correctly.

  This may be stating the obvious, but it's one of the write-once-and-fail-to-run-everywhere current issues that keep away developers biting Java beginner, like me, in the back.

  :-(

• Receive the error message cannot start the base engine, the application can not continue trying to work with Skype and Intervoip

  Original title: Intervoip and skpye does not work on my computer. When I open the PC screen, cannot start the base engine, the application can not continue. How I have this problem?

  My Intervoip and skpye does not work on my computer. When I opened the PC screens, failed to start the base engine, the application can not continue. How I have this problem?

  Base engine
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/core-engine/a18d491c-25e2-4473-A03B-1f3161c5131b

  Have you tried right clicking on the shortcut to the program or the .exe and select "Run As Administrator"?  Perform, even if your user name is an administrator.

  Try right click on the actual Setup.exe and choosing the option "Run As Administrator"?  Perform, even if your user name is an administrator.

  Two applications load mode safe mode with setting in network or a clean boot?

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  If you test with another Windows user, have the same problem?

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  First try checking not be (read-only) to see if it reports any problems file or hard drive.  If this is the case, start by checking the two boxes, in no other rerun.

• "Error occurred while packaging the application...". Cannot load library' in Flash Builder 4.7 (iOS)

  EU struggling to solve this error yesterday in Flash Builder 4.7 packaging an app for iOS.

  "

  Error occurred during the application of packaging:

  Exception in thread "Main Thread" java.lang.UnsatisfiedLinkError: can't load library: C:\Program Files\Adobe\Adobe Flash Builder 4.7 (64 Bit)\eclipse\plugins\com.adobe.flash.compiler_4.7.0.349722\AIRSDK\lib\aot\lib\llvm.dll

  at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1706)

  at java.lang.Runtime.load0(Runtime.java:770)

  at java.lang.System.load(System.java:1004)

  at adobe.abc.LLVMEmitter.loadJNI(LLVMEmitter.java:587)

  to adobe.abc.LLVMEmitter. < clinit > (LLVMEmitter.java:597)

  at com.adobe.air.ipa.AOTCompiler.generateExtensionsGlue(AOTCompiler.java:419)

  at com.adobe.air.ipa.AOTCompiler.generateMachineBinaries(AOTCompiler.java:1790)

  at com.adobe.air.ipa.IPAOutputStream.createIosBinary(IPAOutputStream.java:378)

  at com.adobe.air.ipa.IPAOutputStream.finalizeSig(IPAOutputStream.java:762)

  at com.adobe.air.ApplicationPackager.createPackage(ApplicationPackager.java:91)

  at com.adobe.air.ipa.IPAPackager.createPackage(IPAPackager.java:246)

  at com.adobe.air.ADT.parseArgsAndGo(ADT.java:571)

  at com.adobe.air.ADT.run(ADT.java:419)

  at com.adobe.air.ADT.main(ADT.java:470)

  "

  Update:

  My old solution (of the 64-bit JRE installation) created a different problem. After several attempts and restarted, I was unable to work in the Flash Builder IDE, because it did not meet the burden. Whenever I had to use the Task Manager to close the application.

  Solution apparent:

  Close all applications running in Windows

  Uninstall all versions of JRE (Java Runtime Environment)

  Uninstalling Flash Builder 4.7

  Reinstall Flash Builder 4.7

• Countdown for Fileserv stops when you view the other tabs, resumed once returned to tab. Is it possible to make the timer to continue?

  Hi, when I use Fileserv to download files, it has a countdown as many file hosting services. However if I go to view the other tabs while the timer is going, it gets paused until I go back to the tab and then it starts again.

  For example, I download a file and the timer starts from 30 seconds to the 25 second mark, I discovered a different tab (say to check my email) and after about 40 seconds, or so, I come back to the Fileserv tab and it comes countdown to 25 seconds.

  This has not happened before when I was on 3.6.

  Is anyway to keep the timer goes? Like 30 seconds is valuable enough to check email or blog while I wait.

  Maybe he continues to operate if you pull this tab and open in its own window.

• Library of visual c ++ runtime error message microsoft when you install the Backup Exec Server 2010 continues to protection on Windows storage server 2008

  When I try to install the Backup Exec 2010 Continuous Protection Server on Server Windows storage server 2008 I get error microsoft visual c ++ runtime library error. Runtime error! The setup.exe has put an end to this application has requested in a medium unusaul.

  Hello

  Your question is better suited in Windows server on TechNet. Please post your questions here.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• Receives a PSSWCORE pop that says I have to install a drive to continue when I start the computer.

  Original title: PSSWCORE.

  For some time when I restart my XP operating system I get a PSSWCORE pop up which says I have to install a disk to continue. There is no disk I know. I constantly have to click 'Cancel' several times and the popup will disappear. What is it and why do I need?

  Hello

  Did you do any hardware changes or software on your computer before this problem?

  You can follow the steps in this link & check if the problem persists:

  I get the message Windows is set up PSSWCORE

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope the helps of information.