DWCS # previews only PHP include and nothing else

Similar Questions

• my mouse wheel controls only my volume and nothing else

  My mouse has suddenly begun to control my volume and nothing else, it won't scroll on any page, does not work in photoshop and will not work on one of my games, I haven't downloaded a mouse wheel for volume control programs and I have uninstalled and reinstalled the drives for my mouse Reset my computer several times, checked in the control panel mouse settings and can't find anything that may be the cause of the problem, any suggestions?

  I came here with the same problem and tried all of the above. I came close to reformat my hard drive, but the answer turned out to be very simple.

  I replaced the batteries in my wireless mouse and it works fine now. :)

• What causes a Color LaserJet 3525 print only Extensible task and nothing else?

  I enclose a printed copy of what should be a configuration of a Color LaserJet 3525 page. As you can see, there is no text of any kind printed but only finger stretch marks. I am also attaching one of the pages of the diagnostics output. As you can see, only magenta print whatever it is readable.

  The printer went out of warranty two years ago, but worked well so far.

  You problems with the black and yellow toners or problem with the scanner to the laser/for these colors. The easy way to test is to go to the diagnostics on the printer menu and choose the item disable check cartridge. When the printer says ready, diagnostic mode, open the front cover and do switch the magenta toner in the black slot and in the yellow slot cyan toner and toner Black, then put in the slot of magenta and yellow toner in the cyan slot. Now try and print a page of Setup again and post the results. If you now get a magenta print which is good, which would indicate that the black toner, and I think that the yellow toner are bad. If still the same problem I think you meet / scanner laser or high-voltage issues. You can also do engine test again to see what lines appear on the page. Keep in mind that the person above you wanted the diagnostic with the installed trainer test.

• Windows 7 Pro 64 bit black screen with the mouse only on startup and nothing else

  Hi there, Windows 7 system recently froze on me when I tried to move a large file on a USB hard drive. I didn't was not able to close the file so I decided to stop my PC with the regular start-> Shut Down.

  Now when I try to turn on my computer, after the "starting Windows" and Microsoft report goes to a pure black screen with just a (mobile) mouse cursor, not keyboard commands or click right work (eg. ctrl + alt + delete does nothing).

  I tried to start in safe mode, safe mode with network, they do the same thing after the "Starting Windows" screen. Tried to boot with my Windows 7 Pro 64-bit installation disk so and entered commissioning repair - no problem. Tried system restore and it went successfully, however after clicking restart is again the same thing!

  It's really making me crazy, could someone please help me? I really want to reinstall Windows and lost my files (since I can't even in a form any Windows Installer interface I'm not able to do a repair).

  Thanks in advance for your suggestions!

  I will proceed to a re - install now, thanks anyway for your efforts

• Boots Vista black screen with white cursor and nothing else (Black Screen of Death)

  After a download from Microsoft update last week, my system has rebooted. He first had a screen blue error, rebooted, reported a disk error and automatically run CHKDSK. Since then, the system has started a black with white slider screen and nothing else. This happens at startup options (Normal, safe, safe with the last command good known configuration). Not even sticky keys would come to the top. CTRL-Alt-Delete, Ctrl-Alt-Esc and all other keys has nothing did. Even with a right click.

  I searched all over the web for solutions. I found (and tried) several over the past week, but nothing has worked.

  Here's what I tried...

  F8 held key on boot to the top and entered the startup recovery. Ran of recovery. Initially so found of disk errors. Those fixed. Then he said he could not repair the system and reported two pilot errors.

  Tried system restore. He said that I had no restore points (even if I know that I had before).

  With the help of recovery options, I went to the command prompt. Asked to RegEdit and load the Software hive. Checked the connection entry Windows NT; made sure, it has been set to explorer.exe

  The system, checked RpcSs Key hive. Already the NT AUTHORITY\NetworkService value

  Renamed event connects winevt and not create the Logs folder

  Removed the hard drive. Attached to another system (as slaves), and the registered file permissions. They have screwed everything up. The fixed file permissions and drive put back in original system.

  Œuvres self-retaining keys now. Do not, however, as my sticky keys doesn't have a link to configuration.

  Went back into recovery startup via the F8 key at startup. Now, when I run start recovery, it says that everything is going well and there is no problem.

  I have download the hotfix from article 977675 Microsoft, but I don't know how I can apply it without being able to get into windows. I would like to contact MS e-mail or chat support, but I can't get the product ID without being able to connect (frustrating talk).

  I would like to reinstall OS, but HP does not provide an installation disc with their systems (only a full restore partition). My system is backed up (with the exception of the Windows folder), but I really don't want to have to make a full recovery, as I have a lot of specialized programs and settings that would probably take me a week to re - install and re - set.

  Anyone have any new ideas?

  Hello

  Here's my usual BlackScreen convenience store, because it may be that you haven't tried
  or if you have access you might be able to come back and start some of them.

  ----------------------------------------------------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
  manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore there only to)
  being bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I'm looking for something, or even click on a link "for you", that he - and nothing else than the spinning wheel.

  I'm looking for something, or even click on a link "for you", that he - and nothing else than the spinning wheel.

  It is easier to go to YouTube, which I prefer not to do.

  < published by host >

  It's real comments to your message:

  You talk to other users here, not to Apple directly.

  Click below and select the product (s) on which you have any concerns or suggestions:

  http://www.Apple.com/feedback/

  Then select your product

  When you contact Apple to give them feedback, note the statement at the top of this page:

  'Use the form below to send us your comments. We read all comments

  carefully, but please note that we cannot respond to comments you

  submit. »

• White PSE 6 welcome screen and nothing else

  Started all of a sudden, no problem previously. Installed on an iMac running 10.5.8. Blank home screen and nothing else. Tried to reinstall... nothing works... help!

  What happens if you turn off your internet and then start PES 6?

  There has been a rash of posts in the forum on photoshop cs3 photoshop, do something similar, I wonder if it is related

  PES 6 is based on the cs3 code.

  If it's the same thing, then maybe it's screen recording your seeing (or do not see because it is empty)

  If you start PES 6 without internet on and the registration screen that you see, press never register and if I hope to solve the problem.

• F4280 printer test page print header "Windows printer test page" and nothing else underneath

  F4280

  The software solution center says printer is "ready".

  When I print the test page by pressing "cancel - start copy color", nothing is printed on the page. The page comes out blank.

  When I print the test page for the Control Panel, it prints the header 'Page of Test printer Windows' and nothing

  under the header.

  Hi, have you tried changing the black cartridge?

• Only Firefox and nothing else will be connected to the internet

  Here is what happened. A year ago, I've updated CDA Downloader on my computer. He was working before I did, and after I did, he said that he is not able to connect to the internet. Soon, I realized that this had happened to all currencies on my computer (for example, includuing) with the exception of my old version of Firefox. If I try and update, it stops working too.

  I tried everything, including the obvious answers online. I'm not the value of the settings 'LAN', and I did not add-ins, or whatever. Forums like this are frustrating because once other people get their answer, the cat is over, while nothing works for me. It's been a year and it's really VERY frustrating to deal with this for so long. Cannot use aps, impossible to download a LOT of software and can't get my audio books. Can someone help me please?

  So, what you say, it's that the problem does not exist with Firefox, but rather the problem is with other programs do not connect to internet - is that correct?

• Thunderbird has suddenly charge only 200 emails on behalf of yahoo of the year 2011 and nothing else. What's wrong? -Due to problems with Yahoo.

  I use Thunderbird to access 3 e-mail accounts. A few days before, all the emails of one of these missing accounts and now Thunderbird does not charge that 200 emails from this account of the year 2011. News, incoming mail does not appear, and I can't know how to extract or import any emails which are newer than 2011.

  What is your email provider?

• PHP includes and the evolution of ads on different pages in the same spaces

  I just watched a tutorial where the guy changed the title of his blog pages by writing a variable empty within the title tag on its page header/include.

  He then said a variable with the same name as in the include file, but with a different string on the page value at the top of each page as it is about us contact etc..

  Here's some quick code to make it a little clearer

  This is the code on the page include

  <title><php echo $title:>?<title>
  

  This is the code for the other pages.

  $title = "About us"
  
  include "the link to the include page";
  
  <h2><?php>echo $title; ?><h2>
  

  My question is you can do in the areas where you have ads placed (by the way, divs etc.)?

  If you want to change the aswell of ads, not only the title, but still use the same structure to include would there be this kind of method...?

  Insert if applicable include on each page.

  SSI files:

  AD1.php

  AD2.php

  AD3.php

  HTML pages:

  index.php = ad1.php

  about.php = ad2.php

  contact.php = ad3.php

  Now, if you want to rotate the ads in a table, it's something totally different.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• I would like Firefox to HTML for reading and nothing else.

  I would like to be able to browse a domain without sending all the cookies, running a script, or resources other than the URL download or pages I specify - just to get the HTML code and format text for reading, with tables and links and other whatnot, clickable image placeholders may be. Similar to the way that the text-only Lynx browser works. Is it possible to do this in Firefox? Or maybe an add-on that does? I have Noscript, but it is only part of what I want. It seems that Firefox is already doing the basic work, I just want to make a whitelist or a mode where is ALL this.

  Maybe this extension:

  • Tab permissions: https://addons.mozilla.org/firefox/addon/tab-permissions/

• Safari crashing my screen (and nothing else)

  I have Safari version 9.1 and it seems almost random, everything crashes. I noticed that the clock stops (I displaying the seconds), and any other Visual stops. However, I can always use the slider, and if there was no noise, it continues to play. In fact, if I click around 'blindly', I find that I can still do things, but I don't see what I'm doing, except when the cursor is and what it looks like to (sometimes it converts the finger pointer, for example).

  For example, once that it froze when I was playing a YouTube video. During the video, the audio continued. I found that when I click on the video portion of the YouTube window, audio paused and played as it normally would.

  Until recently, the only way that I found out it was hard closed. However, I recently discovered that if I tried to close "blindly" making an assumption on how to click on 'Stop' and push then Enter. I saw that before it completely stops (or before some unsaved app stop closing down), the display will return to normal.

  The problem edge for several weeks now every day 1-2, at least once a day. I can't find any factor correlation for each accident. It happens seemingly randomly.

  I know that the problem is with Safari because every time this happened, Safari was on (whether forward or back). In addition, when I used other browsers (such as Chrome or Firefox), the display did not freeze. I went back to Safari yesterday and it worked fine so far here, but as I used it this morning there was another accident.

  It's such a weird problem! Everything that happens?

  I posted some details of my problem to a previous debate, but that was before I had it identified as a problem in Safari. Display Macbook Pro gel randomly. Sounds and cursor still works.

  First on your mac - help looking for shortcuts - there should be shortcuts for freezes and shortcuts to sleep and stop.

  Gels date back at least to Snow leopard and have something to do with Spotlight/finder of indexation is not able to follow and cleaning disc for the Unix style.

  Have had safari freezes over the years and that had to do with the best sites - then edit all best sites you want not the top sites, bookmarks RSS seem to also update, even in the case of e-mail.  When I was using Safari didn't not top sites had been "fixed" to update until I edited the best sites - Apple has a default list - and add sites you use many - edition puts the site in a list of sites not top.

  Apparently the spotlight can rally on indexing (MD and MDworker jobs in Activity monitor) until you can get a memory leak.   After that happens if your startup is on a blue or gray screen, but you hear the reader do something - wait - when the office arrives - restart immediately - and if that gets a spinning wheel - restart once again - should be fast - so to ensure that see if you can go to a menu (I use the utilities) and open something (I opened the console) if that is your are good to go.

• iPhone 6 alternating between the black screen and the Apple logo and nothing else

  my iPhone 6 alternates between a black screen and the Apple logo, what do I do?

  Hi Nathanielfromwa,

  If your iPhone 6 alternates between black screens and the Apple logo, this could be a problem that can be fixed by wiping your iPhone to factory settings. If this is the case, save your iPhone first. I've included links if you need help with backing up your iPhone, but also to reset to the factory settings.

  How to back up your device using iCloud or iTunes - Apple Support

  Erase content and settings on your iPhone, iPad, iPod touch or Apple Watch - Apple Support

  I hope this helps, and if you have more questions, do not hesitate to ask!

• Try to use updater but just get spinner and nothing else. No error message or anything.

  Cloud is already installed on the desktop and use perfectly until today. I click it and it comes just as she tries to open it, but nothing happens. Using the 1.6.0.393 version. Should I reinstall the cloud? Am not very technical but have used this to work under the VIP program for months and it never happened. Like a simple answer, if possible? Thank you.

  Hi Allegra,

  Please read the following steps.

  1 close the creative cloud application.

  2. navigate to the OOBE folder.

  Windows: [system drive]: \Users\ [user name] \AppData\Local\Adobe\OOBE
  Mac OS: /Users/ [user name] / Library/Application Support/Adobe/OOBE

  3. delete the opm.db file.

  4. start the creative cloud.

  I hope this helps.

  Thank you and best regards,

  Sumit Singh