DX diag
I use a HP h8 - 1280t, intel I7, 10 GB, 1 TB harddrive mem.,
Not sure if this is good advice for my question. If this isn't the case, move and advise.
Today, when I tried to run dxdiag, I kept getting the message displayed in the image.
Anyone have an idea why and how fix?
Ok. Don't know why my snapshot is not loading. In any case, here is what the alert.
DirectX Diagnostic tool
DxDiag has detected that there could be a problem of access to system information, the last time that the program has been used. You want to bypass the information this time.
YES NO
Do not know what is happening because I've never had a problem to run dxdiag to date. I need the info to submit to technical support of software to know what a problem I'm having.
Is it possible that the correct information is displayed even with the above alert?
Thanks for any idea.
Tags: HP Desktops
Similar Questions
-
Satellite A300 PC Diag stops working with the exception code
Hello
I have A300 under Vista 32 bit. I get an exception code you try to run the Toshiba PC DIAG utility. I uninstalled the Pack Toshiba value added & downloaded and reinstalled again. The message that appears is..."Diag PC has stopped working"
Signature of the problem:
Problem event name: BEX
Application name: PCDiag.exe
Application version: 4.0.0.1
Application timestamp: 476b541d
Fault Module name: BASICI ~ 1.OCX
Fault Module Version: 4.0.0.13
Timestamp of Module error: 4805a4c5
Exception offset: 00038aeb
Exception code: c000000d
Exception data: 00000000
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 3081
Additional information 1: c858
More information 2: 3d2a20dcc5ac6b196502ede9a2965166
3 more information: 65b 9
Additional information 4: eee6adad555b506e470939add9a184c2Does anyone have a resolution? Thank you
To be honest I don t understand you.
What is an exception code? What did you do with him? Have you noticed this problem in the past?Is that the Toshiba PC diagnostic tool is part of the Toshiba value added package and who knows what you have done.
What you can try is to remove VAP, clean the registry entries for the Diagnostic tool and try to install VAP again in the hope, it will be working again. -
Lenovo has program complete diag of the system which is bootable for the p580? I think I'm having a problem major hardwre and I can't get an OS installed on my new hard drive, so looking to test the system.
Thank you for using the Community Forums of Lenovo!
This may be the tools you need
http://support.Lenovo.com/en_US/diagnose-and-fix/detail.page?LegacyDocID=LENV-DIAGS#boot
and as a product on neokenchi Post
UltimateBootCD (www.ultimatebootcd.com) for diagnosis. Use of video hereand here. To create a bootable CD:
1. download the ISO of UBCD
2 burn the ISO with imgburn
3. Insert the CD that you created in the faulty computer and restart
4. upon restart, press and hold F12 and boot from the ODD/CD-DVD
To burn the client software diagnosis on a flash drive, follow this guide.
If you get any errors, you will need to contact lenovo for the service.
Hope this info helps
Solid Cruver
-
Is it possible to run DiagOnCAN with the NI-CAN driver only (without car Diag command Set)
Hello world
Is it possible to run DiagOnCan without using Diag command set auto - only with the NI-CAN driver (hardware I use is low tolerant speed - USB8472 and NOR-XNET)?
G. Petko
no problem to do with your hardware and NI-CAN frame API.
However, you must implement the Diag and Services Transport layer on your own, which is quite a big job.
I recommend you spend the money for automotive diagnostic command set that supports
- NI CAN (PXI, PCI, PCMCIA, USB)
- NOR-XNET
- cRIO/985 x target (Pharlap and VxWorks) #.
which means that if you plan to transfer your application in the future to different hardware target or the real-time target, that you don't need to change your app at all.
-
Compaq Armada 7700 series ISO DIAGS/BIOS
Hello everyone, I'm having fun tinkering with an old Compaq Armada 7730MT and cannot get into the BIOS. Using fdisk, I confirmed that I always have the special partition (16 MB, first partition on the disk, etc.), but still, I can not load the bios by pressing F10. So I found Rainald T (a user on this forum) wonderful guide on how to get the files for installation and a floppy disk DIAGS. I downloaded the files but you prefer to use an ISO. The link ftp for ISO in the guide no longer works so I was wondering if anyone know where I could get the ISO standard. Thanks for any help.
The results of several tests display the files that weed was that obviously would not be not attached - no idea why :-(
Pls send your electronic mail address my above given address:
I then send them by mail.Concerning
Rainald
---
the files size is 2.9/2.8 MB -
How is it, I can't activate a rule to run Debug Diag on my Windows XP SP3?
What is the problem with my Debug Diag / Windows XP SP3?
I can't activate a leak rule on debug diag.
It returns this error message box
"Error during activation of a rule of leakage through the DbgSvc service. The parameter is incorrect. ».What can I do to fix this?
Please help me on this. Thank you.Hi marcanthonyconcepcion,
Refer to the article below and check if it helps.
How to use the Debug Diagnostic Tool v1.1 (DebugDiag) to the process in User Mode debug
-
I suddenly have a part of my hard drive marked I: > Diags
I have an 8700 Del
Apparently, according to google search that there are other owners of 8700 Del who had this player suddenly appear 36 mb in size. 35.9 free.
Can someone tell me what this disk and what created it?
Thank you
It is the partition of diagnostic Dell - accessed with F12 at startup. It will test hardware in your system.
-
A major bug in the last SupportAssist / control device Dell Diag
Just fixed this problem with a Vostro 3750 customers.
The latest drivers from support cause half a second DPC latency to the time once every 60 seconds and much more small breaks in between. The problem can be seen as the mouse cursor is blocked for a while and if it is audio, you hear a gurgling sound.
See user experiences more at: http://www.sevenforums.com/sound-audio/361186-audio-stutters-buzzing-caused-dpc-latency.html
A correct solution at the moment seems to disable the device system Dell Diag solenoid (i.e. DDDriver64Dcsa.sys) until the new version is released.
Hope this helps someone to avoid all the troubleshooting that we had to...
Greetings,
The
Eventually, I discovered that my problem was a hard to die. The reason why the disc was get tied up was that he had problems being written (or read eventually). When the disc is eventually died and I replaced it, my problems have disappeared. I'm slowly (or not so slowly) replacing all my seagate drives with either Hitachi or Toshiba drives. I have two computers, two external drives and a disc of 8 NAS. I had 4 Seagate drives die on me. So far, Hitachi and Toshiba players don't have me.
I know that Seagate has bought the Htachi training business. I just hope that Seagate does not have to rush through the superior technology of Hitachi.
-
I was out of town and my system froze. When I got home, I had to turn off and restart. System entered the disk sector recovery and repair bad sectors. Then when the computer reboots, the system shows error '7 Windows Build not genuine 7600. After reviewing the forum, I have DL'd Diag MGA tool and results create a CAB file. How can I publish the results here?
When I check the properties of the computer, to the title of the Windows Activation, there "Status unavailable", "product ID: not available.
In order to receive the best support, download and run the tool diagnoses of Genuine (MGADiag.exe) at http://go.microsoft.com/fwlink/?linkid=52012link. Click on 'Continue', and then, after a few seconds, click on the button 'copy '. Then, create a response message in this thread and paste the report in.
-
I did a complete reinstall of windows 7 pro to do a periodic cleaning. The system downloaded 168 files updated, and when they tried to install they have failed. It may be that the file has been corrupted? I went back through the updates and downloaded it all, but I broke up in smaller numbers. Still will activate not windows 7. The phone option say no as well. Code details is 0xc004c003 the activation server has blocked;
I ran the validation and it finished with welcome on windows, now that your copy is genuine! My code on the report of diag is 0 as well. Still can't activate. Why is he blocked?
Help, please.
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 0
Code of Validation caching online: 0x0
Windows product key: *-* - YMQRV - 4P9F8-QFY9C
The Windows Product Key hash: nxNbw1xD302 + eRUqT558UnYxEyo =
Windows product ID: 00371-835-1071516-85886
Windows product ID type: 5
Windows license type: retail
The Windows OS version: 6.1.7601.2.00010100.1.0.048
ID: {B1579125-A0BD-48CA-97C2-533F0287589A} (3)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Professional
Architecture: 0 x 00000009
Build lab: 7601.win7sp1_gdr.140303 - 2144
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program may Explorer\iexplore.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{B1579125-A0BD-48CA-97C2-533F0287589A} 1.9.0027.0 6.1.7601.2.00010100.1.0.048 x 64 *-*-*-*-QFY9C 00371-835-1071516-85886 5 S-1-5-21-2194484404-786307286-2763911233 to be filled by O.E.M. power O.E.M. American Megatrends Inc.. P1.70 20130408000000.000000 + 000AE003707018400FC 0409 0409 Time(GMT-08:00) Standard Pacific 0 3 109 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7601.17514Name: Windows 7 Professional edition
Description: operating system Windows - Windows (r) 7, retail channel
Activation ID: e838d943-63ed-4a0b-9fb1-47152908acc9
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00371-00170-835-107151-00-1033-7601.0000-2682014
Installation ID: 021406613026060133897304781740051121623754265523021363
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: QFY9C
License status: initial grace period
Time remaining: 40200 minute (s) on (27 day (s))
Remaining Windows rearm count: 4
Trust time: 26/09/2014 01:25:46Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: 0x00000000
Beyond: 0 x 0000000000000000
Event timestamp: 9:26:2014 00:58
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: recorded, Version: 7.1.7600.16395
Output beyond bitmask:--> HWID data
Current Hash HWID: NgAAAAIABAABAAEAAAADAAAAAQABAAEAHKImUa8MGPIQMxQTlLJU + Xy6aCwgdNCwIE + CJyAhActivation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes, but no SLIC table
Windows marker version: N/A
OEMID and OEMTableID consistent: n/a
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC1156 040813 APIC
FACP A_M_I OEMFACP
HPET 040813 OEMHPET
MCFG 040813 OEMMCFG
LASRYVITRAGE 040813 OEMB1156
AAFT 040813 OEMAAFT
SSDT A M I POWERNOWHello
Thanks for posting in the Microsoft Community. The error 0xC004E003 code is produced if the Software Licensing Service reported that license evaluation failed.
Use the feature "Change product key" enter your key product again:
If you were directed to this method, you have the correct product key, but you should try to enter again to reactivate Windows 7. To do this, follow these steps:
- Click Start, click computer, and then click System Properties on the toolbar.
- In the Windows activation section, click the change product key. If you are prompted for an administrator password or for confirmation, type your password, or click continue.
- In the product key box, type the product key, and then click Next.
Note Use your original product key. - Follow the steps in the Windows of Activation Wizard to complete the activation process.
Call Microsoft use the manual telephone Activation:
1. When you reach the desktop click Start, then in the search box type: slui.exe 4
2. press enter on your keyboard
3. Select your country.
4. Select the telephone activation option, then dial the given number and hold for a real person.You can also view this article online help:
Error 0xC004E003 Activation for Windows:
http://Support2.Microsoft.com/kb/978305
Let us know the status of the issue. If you need help, please after return. We will be happy to help you.
-
Failed Windows Update - error 8000247 - did the Diag MGA tool
Hello
I have a Toshiba Satellite Pro with Win 7 Pro 64 bit installed.It is a fresh to this machine load, after the original Vista installation fell to pieces.It has been successfully activated by phone.I downloaded all the main drivers on the site of Toshiba - video, sound, chipset, biosWindows updates installed normally, he had done about 150 of them when it came. The error is"The Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer.I checked this, and the BITS and Windows Update services are running in automatic mode and is set to open a session under the Local Service account.I was also wondering if it would solve a complete installation of SP1 and have uploaded it separately, but it does not affect it.I also renamed the windowsupdate.log file and folder softwaredistributon and rebooted, but there is also no effect.various other tools of fixit MS claim solve the errors, but the problem remains.I also tried the Windows analysis tool to see if I had a few compatibility issues, and it gives the error 8000247.What else can I try?-MGA diag tool results are below.Thanks, DannyThis may simply be caused by a bad set of drivers of technology Intel Rapid Storage Technology-
Intel rapid storage driver installation
try to download and install them from here - https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=22194
(you want the download of iata_enu.exe)
Once complete, please restart twice, then after another MGADiag report.
-
I have a problem with tent to connect to internet. I'm using 7 Ultimate and I continue stuck to "identify the location" when connecting to my wireless router. I have no problem with access to the internet directly when I connect my computer to the server, the router is connected to. It seems that it is a problem of communication between my computer and the router.
I had internet well this router before but now it seems not work. I tried everything suggested previously, including reinstalling drivers and poking my router using the diag.
I need major help.
Hi DucoGranger,
1. don't you make changes on the computer before this problem?
2. What antivirus application do you use on the computer?
If your computer has a wireless network card, Windows will automatically detect the networks wireless in range of your computer. You can see a list of wireless networks that Windows has detected in connect to a network. If Windows doesn't detect a network that you think is in range of your computer, it could be for the following reasons.
a. your computer's wireless switch is turned off.
b. your computer is too far from the access point or wireless router.
c. the access point or wireless router is disabled or is not working properly.
d. There is interference with other devices.
e. Windows is not configured to connect to the right type of network.
f. the router or access point is busy.
g. the network you're looking for is defined on only broadcasts do not its network name (SSID).
h. your network administrator is blocking access to certain networks.
I would suggest trying the following steps and check if it helps.
Method 1:
I suggest you try the procedure described in the article and see if it helps.How to reset the Protocol Internet (TCP/IP)
http://support.Microsoft.com/kb/299357Method 2:
If the problem persists, I suggest you try the procedure described in the article and check.Solve problems, find wireless networks
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks(This article also applies to Windows 7)
Method 3:
Temporarily disable the security software.
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Check out the link for more information.
Windows wireless and wired network connection problems
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-WindowsBack to us for any problem related to Windows. We will be happy to help you.
-
Hello
SQL > select * from V version $;
BANNER
--------------------------------------------------------------------------------
Oracle Database 11 g Express Edition Release 11.2.0.2.0 - 64 bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE Production 11.2.0.2.0
AMT for Linux: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
-bash-4: $1 cat/etc / *-release
CentOS version 6.5 (Final)
LSB_VERSION=base-4.0-AMD64:base-4.0-noarch:core-4.0-AMD64:core-4.0-noarch
CentOS version 6.5 (Final)
CentOS version 6.5 (Final)
A script runs on our server which sends an email when there is an error in the comic book. Currently, I received the following error message. It is the second time in a week:
Reported by Script: dbalarm.sh
Sun may 25 02:00:02 2014
Errors in the file/u01/app/oracle/diag/rdbms/xe / XE/trace/XE_j002_31317.trc:
ORA-12012: error on auto work "SYS." "" BSLN_MAINTAIN_STATS_JOB "
ORA-06550: line 1, column 807:
PLS-00201: identifier ' DBSNMP. BSLN_INTERNAL' must be declared
ORA-06550: line 1, column 807:
PL/SQL: Statement ignored
Please notify
Thank you in anticipation
Difficulty for it's a drop and recreate the user dbsnmp. On any * nix db host, with a connect sysdba, drop/create/and a grant:
@? / rdbms/admin/catnsnmp
...
@? / rdbms/admin/catsnmp
...
Grant execute on sys.dbms_job to dbsnmp.
If you are using grid OEM or Cloud control dbsnmp 12 c is one of "used" connection credentials. Or if the grid is not in use on your site and can probably stop right after the catnsnmp and let dbsnmp user out of the instance. If someone wants to 'snoop' around dbsnmp is generally quite high on the list of "things to try" to see it as "lies" in the instance.
-
Cannot read the OS DVD, but can read the Diag CD sata disc?
Greetings,
Laptop is the famous brick of overheating creatively titled DV6416CA.
I had to format the new hard drive after the original hard drive fried. (HP says too bad with that in short).
It now sports a WD3200BVET which is sata 5400 320gigs. I had installed Windows 7 during about 6 months now.
It was great. Life was good. I was happy. My daughter, wife and mother-in-law all used to watch movies online.
Then they got a virus that has rendered useless map of wireless network and in the end, I was told by 2 different specialists to give up and reinstall. So I said OK. I'll reinstall with the same dvd that I used last time. But it was not to be.
Somehow, I can read the diag cd I have but when I insert a dvd of Vista (a real one) it will not read it. He tries, but giving up at the end I tried the DVD (the original one) and also one dvd of Windows 7 on 2 other workstation without problem.
Therefore, I can not install the OS from scratch on this laptop using the DVD player.
The BIOS is also sport all options, for example, the IDE compatibility or such.
Just the phone does not have a DVD OS...
Thanks for the help
Antoine
PS: with 3 generations of angry women, waiting for this I need all the help I can get! LOLz
Perhaps because it is the laser burnt out or defective DVD it reads cd but not dvd. Have you tried to boot from XP cd?
You could try a 4 GB USB Flash drive to create a W7 bootable Installer.
http://AgniPulse.com/2009/11/Windows-7-32-bit-and-64-bit-direct-download-links/
http://freetechjournal.com/tech-space/Microsoft-Windows-7-bootable-USB-creator.html
-
run-time error 'esxnet-support diag '.
It seems this command wrong himself. See as follows
root# esxnet - support diag
========================================================================
Console OS interfaces
========================================================================
vswif0:
Subnet mask (255.255.255.0): ok
(10.71.5.62) IP address: ok
Gateway (10.71.5.1): ok
Cannot use a value that is not defined as a reference to a matrix to/usr/sbin/esxnet-support line 635.
root#.
How to run full?
Thank you
See this thread
-
Hello
I see a generation huge file in the following of my database server location. Is could someone please tell me what are these files?
What is the difference between log_n.xml and log.xml? I guess that these are all part of 11g.
Are these log files? Can we delete these files because it consumes 10GB of my server![default](ncsdev11)/u01/app/oracle/diag/tnslsnr/<server_name>/listener/alert-> ls -ltr total 2200298 -rw-r----- 1 oracle dba 10485980 Jul 9 03:11 log_1.xml -rw-r----- 1 oracle dba 10485835 Jul 9 06:13 log_2.xml -rw-r----- 1 oracle dba 10486105 Jul 9 09:21 log_3.xml -rw-r----- 1 oracle dba 10485813 Jul 9 12:32 log_4.xml -rw-r----- 1 oracle dba 10485879 Jul 9 14:20 log_5.xml -rw-r----- 1 oracle dba 10486046 Jul 9 15:21 log_6.xml -rw-r----- 1 oracle dba 10486095 Jul 9 15:56 log_7.xml -rw-r----- 1 oracle dba 10485778 Jul 9 16:31 log_8.xml etc.......... -rw-r----- 1 oracle dba 3219668 Aug 30 12:11 log.xml
Thank you!Yes, they are log files that have been rotated off the active one.
You can remove the log_nn.xml files, since these are the old logs - assuming that you don't need them for verification or diagnosis of connectivity issues. The log.xml is the only asset and should be left alone.
Maybe you are looking for
-
Forgot to answer to the security question
I did all the necessary means to reset the answer to the security question, it seems that my country (Nigeria) is not supported. .Please help me...
-
Hello Yesterday, I tried to downgrade my iPad Mini 2 (128 GB) of 9.3 to 9.2 of iOS in DFU mode. Before that, I backed up my iPad in iTunes. After decommissioning, apparently all of my 3rd party apps have been wiped out, and that left me with a huge '
-
HP DL180 Gen9 server: HP 10 GB 2 port 561T Ethernet adapter
Hello Can you help me if this 561T HP 10 GB 2 Port Ethernet adapter is Compatible with my HP DL180 Gen9 Server? Thank you Mark
-
Satellite L - need driver wireless card
Hello I just reinstalled a fresh copy of Windows 7 on my laptop but have lost the discs that have the drivers who allow me to access the internet wireless etc. I am aware that I can download, but do not have a clue which I am supposed to be download.
-
This is a homework problem Yes, I have summer through readings and I can't figure out how to do this. We are able to use the temperature simulated in the activity file, I don't see where comes the thermometer and I want fills the degrees right now (F