Dynabook SS2000 PS80/2 (series Portege 2001)

Hello
This laptop is used these tiny hard drives, unusual. Hard drive died, and I just want to boot the laptop with a SD card. How to do this? How to enter the bios to change the boot sequence? I tried to find manuals, but it is only in Japanese. Any ideas?

Any suggestions appreciated,
Thank you.

Post edited by: slabo

If you press F12 to the Toshiba splash screen, it will display the bootable devices.

You can download a manual English for Portege 2010 (or 2000) of the Toshiba Canada, here is the link:
http://support.Toshiba.ca/support/download/ln_byModel.asp

Direct download:
http://support.Toshiba.ca/support/download/files_downloads/P2010/P201EXUM.PDF

Tags: Toshiba

Similar Questions

  • Driver for Dynabook SS2000

    Hello

    I bought a Toshiba Dynabook ss 2000 80 p/2, with Win XP installed.

    My question is: could someone tell me where I can find the driver for Trident CyberBlade XP Ai1?

    It would be nice. Thank you.

    Dieudo.

    Hello

    the machine you have is built in the same way as the Portege 2000 series. You will have to go the [drivers download site | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp], choose archive, then the Portege 2000 as a model.

    You will find the drivers you need.

    Welcome them

  • Portege Z series - the mouse cursor moves its own

    When I start my series Portege Z the cursor of the mouse moves by its own. Alfer several minutes (less than an hour) it stops and it works properly.
    For your information on the laptop, the Antivirus is installed and updated: AVIRA and Spybot

    What I tried to solve the problem:
    (1) I downloaded and installed the latest version of the pointer ALPS driver device that even so the same version was already installed. No result, same behavior
    (2) I tried with an external USB mouse, disable touchpad/pointing stick. No result, same behavior

    Suggestions, please?
    Thanks in advance

    Maybe you can try to start with a Live CD/USB. If this problem occurs also with the OS Live the question is related to laptop. If not, it s a Windows problem and perhaps a recovery would solve the problem.

  • Need information about express port replicatior for Portege M series

    Hello
    What are the ports and how many of them, are included in the express port (PA3508E-1PRP) for the m series portege Replicator?

    Thank you
    Russell

    M series has four different binders. Can you be perhaps more accurate?

  • Portege 2010 - cannot find the button FINISH to save the changes to the BIOS

    I couldn't save my Bios Setup because I can not find the keys to the end to save the changes.
    I tried to hit all the keys on keyboard, but none of this save the settings.

    Can you show me the keyboard scheme showing the end keys?
    I have toshiba portege 2001 series.

    > Can you show me the keyboard scheme showing the end keys?

    I checked the user manual which you can download from the Toshiba user manual page and the END button seems to be located in the upper right corner, it s above the BACKSPACE key.

    See you soon

  • Second disk for Portege A600

    Add second HARD drive instead of the DVD in my Portege A600-157 player?

    Hello

    As far as I know that's not possible with the Portege A600 series.
    My knowledge and some other series Portege M400 Portege or Portege M7xx series supports an Ultra Slim HDD Bay adaptor in order to is to insert a second HDD instead of the A600 but CD/DVD drive does not support this

  • Portege L19 Z30 - A - cannot sync the iPhone using iTunes

    We bought 2 of these porteges. Previously, we used older models.

    With the Z30 - A L19 we can't sync via iTunes iPhone6 more, message "can not correct' identify the iPhone.
    With the two different iPhone and Z30 6!

    They went to the Service, Windows 7 has been installed completely new and in addion iTues only, nothing else.
    Same problem both of the porteges. With the help of these iPhones on our former Z930 works without any problem.
    Also as a test on another PC game.

    So it seems that the poblem is jst with iTunes (12.2.1), iPhone 6 and this special seres portege Z30 - has L19.

    Can someone help or if you have an idea?

    • go to your control panel
    • then Device Manager
    • Expand "portable devices".
    • You should see the generic 'apple iPhone '.
    • Right-click on this device
    • Click on update driver software
    • Select search automatically
    • It should take a few minutes, it you disconnect/reconnect etc.
  • Portege 3940ct OS upgrade to function disabling Lan of XPSP2-Driver issues

    I have canvassed all discussions on this forum (and others) and have not found a solution to my problem. But, its obvious that major thinkers on Toshiba laptop configuration problems are here. So, if there is a solution to my problem, my best shot is in this forum.

    I'm pretty advanced in troubleshooting on this issue and the only thing that makes me think that there is a solution, it is it seems that others have installed XP on this unit.

    I have a ct of 3940; I upgraded from W2kPro to XPSP2;
    I downloaded and installed the bios, drivers and toshiba utils for unity on the Toshiba site.

    I have confirmed that all components of the system are operational. This includes a cdrom pcmcia, a network port replicator

    Everything is beautiful... EXCEPT:

    I have no network function.

    Indeed, I have basically no internet communication that it works either - even through the modem. The modem composed and as soon as the provider of the Internet service provider sends a handshake of communications, Windows XP Home edition do not recognize and disconnects. (I have not tried to fax a document - but I don't think that is relevant to the problem).

    Indeed, any type of network connection device, I try to install on the device, the device driver is not installed. This includes the network cards pcmcia (Wi - Fi 10/100 and base a - g) and usb based of a to g wireless adapters.

    Initially, after the installation of Windows XP Home edition, I found that I could not get a connection to the local network through network port replicator.

    To power on, loads WXP b/f, the network port replicator connection LEDs indicate a connection. Once expenses WXP, the port is disabled. [All other functions on the Port Replicator is operational under WXP].

    After logging in to Windows XP Home edition, Windows XP Home edition detects "new hardware" and produced through the driver install process. He then began to try to install an "unknown device". Ithen reports thatit can not locate a driver, then prompt for the user at the end of the routine of material to add.

    Device Manager reports several devices with yellow warning flags indicating that the device driver could not be installed.
    A look at the Details tab on the "unknown device" (the tab 'network device') indicates that the driver who has a problem is 'rasirda.sys '. Device Manager will not allow the device to uninstall.

    Other devices that have the yellow flag are:
    1 Toshiba FIR Port Type-D0
    2 IrDA Protocol (hidden feature)
    3 TCPIP (hidden feature)
    and a network card, I try to install.

    Facilities of device driver for network adapters, including the network port replicator controller (Intel 8255 x based pci Ethernet adapt (10/100) and his sister pilot), does not install (and will not uninstall until the device is removed).

    A glance at the window of the administrator system "Services" shows that essentially all the services necessary to support network/internetrleated services are disabled. Dependencies show that all these services depend, directly or indirectly, on "services.exe". This service will not run, and when the service is to begin, WXP reports that the service.exe does not start the program described.

    Topic 'Information System', a glance at the 'network' tab indicates that there is an adapter called "RAS Async card" disabled.

    My first approach to this problem was to reinstall the update of the Toshiba driver for the controller Toshiba FIR. Nothing helps.

    The next thought was simply to disable the function of TREE, but that cannot be done at the level of the bios... and well, as ambitious as I am, I didn't venture into the machine to determine if the IR controller could be disconnected or removed from the system board. [But if it is a possible solution, then I'll go...]

    As noted above, the only reason for which I hope is it seems that others have run successfully of XP on the 3xxx series porteges, who, to my knowledge all have this same IR port. Also, Toshiba has even written an XP driver for the device.

    What I find curious, among other things, is that Device Manager reports the Rasirda.sys device on the network adapter tab. I would have thought it would have been reported under the 'no plug and play' or the tabs 'system device. Whatever it is, it seems that Toshiba has implemented the infrared device such as a network adapter, or at least that's how WXP is grateful.

    I searched the internet, on the site of Toshiba, microsoft XP, knowledge databases, Web pages etc. and did not meet all the remarkable solutions se... Although I enjoyed some of the protocols troubleshooting - not my real ambition.

    Bottom line, is that I have this computer connected to the internet. With all protocols, and internet communications services disabled, even through the modem... Well, its ridiculous. I can't yet register WXP! Absurd is that! Well well its been late.

    I hope someone will have a solution/workaround solution that will solve this problem.

    In the meantime, I think that the next step is to start over and reinstall XP and try... again.

    I'd appreciate any help that anyone can gather.

    Hello Andrew

    It's always interesting that a lot of users are trying to install WXP on older models. Respect! The problem is that 3xxx Portege is not supported for Windows XP Home edition and I wonder that you have found the drivers and tools for this device. On Toshiba Europe don't here are some drivers for Windows XP Home edition and I assume you found the download of some of them on Toshiba U.S. page.
    Am I wrong?

    Sorry but I have no concrete solution to your problem

  • Portege R700 - need drivers for Windows 7 32 bit

    Hello

    I got the new R700 I develop a version of Windows 7 Enterprise for and I can't find the driver files or install correct programs for the 32-bit version of the TOSHIBA fingerprint utility. I found the download for the R700 on the US site, and while this installs, it doesn't have the 32-bit driver for fingerprint reader in the R700. Can someone direct me to the correct download, or display the x 86 download the site of NZ?

    BTW - the x 64 download works fine if I install Windows 7 Ent x 64 and install it.

    Model number = PT311A-00J00Q
    Component = AES1660 authentic Tec Inc.
    PCI device ID = USB\VID_08FF & PID_168B

    Thank you

    Hey,.

    Usually, your exact model number is listed in the Australian page it seems you have an Australian model:
    http://www.MyToshiba.com.au

    The problem is that I can t find any 32-bit drivers it :(

    So I checked the European page where I found a similar model, PT311E. There you can download Fingerprint Utility for Windows 7 32 bit, it s is available!
    http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios
    Laptop > Portege > Portege R Series > Portege R700 > PT311E > Windows 7 32 bit

    Check this box!

  • Portege R100 - code flashing Orange

    Hello world

    I am Michael from the Germany. I used Toshiba laptops since the 80th end starting with my 1 computer, the Toshiba T1000 w/out of a hard drive...

    I repair many of them personally, I always use 3-6 in my parallel House: o))) especially the series portege 34XX, which is my fav with the tecra line, but anyway.

    Now, I have a new problem I've ever had. I bought a few R100 to built me a fine. A motherboard orange blinking error code: 00101100. I tried the known common things: w / or w/out but nothing!

    Anyone know what hexacode is behind this blinking and what prob is hidden behind the right hex, please?

    Google will find different answers and hexas as read by behind: 0011... and find 32 h blabla but I want to ask you first of all, I believe that in this area; (o))

    until later + better
    Michael

    Hi Michael,

    It s really great to hear you are using Toshiba laptops since the 80th Clipboard :)
    I also use for Toshiba laptop for a long time and they make really good products. Good quality and price, how it should be.

    Regarding your problem: I think that you need a service allowed because here it s a user forum to only where you can talk with people like you me. So I doubt anyone can give you an exact answer what s wrong

    On the Toshiba site, you can find a list of aspic
    Alternative buy an another R100 where you can exchange and test each part step by step, it would also be an option if you repair a lot of yourself! :)

  • Access keys stopped working after update Win XP on Portege M200 and M400

    After having invited to do, I recently upgraded to Windows XP two my Portege m400 and m200 notebooks.
    Since then, I've noticed as hotkeys that i.e. Fn + F1 - F12 has stopped working.
    Outside the windows updates, I only use and change a lot on the m200 so I am sure this has to do with the Xp updates.

    Can someone help me restore the m200 and m400 hotkeys?

    Hello

    Try reinstalling the common module for Win XP edition filed.

    The common module for Poretege you can find on the European driver Toshiba page:
    Laptop-> Portege-> Portege M Series-> Portege M400

    The common module for Portege lies in
    * ARCHIVE *-> Portege-> Portege M series-> Portege M200

    Welcome them

  • Portege Z10T and Win7 - can't get the auto rotation screen

    Hello

    I installed windows 7 to a Portege z10t and can not get the screen auto rotation time reversed the portrait and landscape, I had a quick glance in the chart properties intel and cannot find anywhere them for this set up ideas and Googled it.

    Any ideas?

    Thank you

    Hello

    Are you sure that you have installed all the tools essential to Toshiba and utilities like Win 7 drivers for this series Portege Z10T?

    Driver Toshiba UE page provides the essential as software * easy Control.* Tablet
    This utility is required for the function of automatic rotation of the tablet.

    I recommend you to check if all the software available on the page of the Toshiba UE driver has been installed and working properly on your laptop

  • Portege M400 - RAID driver for Windows 7

    I'm doing a clean install of Windows 7 64 bit on a Toshiba Portege M400.

    I have the computer with the boot CD in, by scanning my fongerprint, press a key to start from the CD, enter the country, click on install now, accept the license, select custom installation and get an empty listview, asking me where I want to install windows.

    I insert a memory stick with drivers from the download page of Tosh (selection of laptop |) Portege | Portege M series | Portege M400 (3G) | PPM41E | Windows XP Tablet Edition | RAID driver, which seems to accurately describe my machine), but the installer just give you the message: no signed device not found driver. Make sure that the installation media contains the correct drivers, and then click OK.

    Can someone point me in the right direction please?

    A.

    Hello!

    Drivers Windows XP don t work on Windows 7's the reason why you can t install Windows 7 successfully.

    You should try it with Vista driver again. The Vista drivers are also work on Windows 7. I think that's all you can do at the moment.

    Good luck! :)

  • Where to find drivers for XP Qosmio E10-1KCDE

    Just reinstalled my windows XP OS because the older operating system crashed.
    Where can I download drivers for laptop E10-1KCDE?

    TIA

    Hello

    The European driver Toshiba page provides the Win XP drivers for the Qosmio E10 PQE10E series.

    Maybe I'm wrong, but I think the Dynabook Qosmio E10-1KCDE series seems to be a Japanese model.

    So I'm not sure if XP drivers from the European page will run on this laptop model. However, you can try to install a single driver. Maybe you are a lucky man and pilots will be compatible.

    Welcome them

  • How to install XP on Toshiba laptops!

    I struggled with this on my ct 3440 (w / a new 20 GB hd).

    First of all, I gave up and installed variants of Linux (fedora and redhat), which has worked flawlessly!

    It was therefore not a hardware problem.

    But then I got tired of her, for me, unusable Linux and tried to gather information from the microsoft bulletin.

    Seems the XP (and install 2000) tries to use an incompatible driver of HD during installation. Using a generic driver would do the trick, but I still know how to do this (by pressing F6 during installation, no doubt, but what to load?)

    Toshiba could probably solve this problem if they come out of the specific HD drivers for laptops mentioned (are you reading this?).

    I thought that perhaps 98 force drivers incompatible during installation, and I was right! :)

    (If your connected to a PCMCIA cdrom, 98 installation does not work, you will need to copy - both - W98, XP CDs and CDROM XP drivers laptop HD using an adapter 1.8 "via a desktop computer.) (possibly another laptop with cdrom integrated))

    Then - update - to XP to go 98 has worked without a hitch.

    This seems to affect a large number of laptops, not only the series, Portege, but also some of the Satellites (I think).

    But the workaround works! :)

    Hello

    You are absolutely right. Workaround works in some cases. In my view, that the installation of the OS should be made using restore CD. On this way, everyone will be sure that all the drivers and tools are installed correctly. The title of the topic should be how to install Windows XP Home edition on the old laptop Toshiba with new and bigger HARD drive. ;)

    If you change some hardware components like HARD drive because of the restriction of the BIOS (for old models of laptops as 3440) can be a problem. It is also important that all the drivers and tools are designed for each OS and for each laptop model.

Maybe you are looking for

  • Why there is no store Apple in Ethiopia?

    Ethiopia is one of the fastest growing economies in the world. The country is a political seat of the people of Africa and and also the second largest population on the continent. Having all these means it is good opportunity for Apple to marketing.

  • Windows XP DHCP problem when authentication network enabled

    I have a weird problem with Windows XP. Here's a few of my observations: -Computer Lenovo X 61 does not connect to a wireless network with a network (that is, Shared/128 b/WEP) authentication. He can never get an IP address from the DHCP server. -J'

  • Internal card drive failure / not recognized

    Built a new system installed Vista Ultimate 64 b without any problem. He acknowledged all the player and the player card internal 5/1 connected to the mobo usb port. I read a card with her and then ejected from the card without any apparent problems.

  • Vista error code install 0x8007000d

    the re - install vista 32 CD after screen product key is not E:\SOURCES\INSTALL. WIM, cd is FULL program, E: is cd drive.vista Home premium. My system is self build, 4 hdd, s 2 are Raid 0 vista ultimate 64.2 were vista 32 hp, first built dec 2007, re

  • This product does gateway use - even as a Client application Antivirus - McAfee Antivirus

    I am unable to find that a statement of the gateway product AV Antivirus uses. Single customer applied and it uses McAfee.