Dynadock does not show second monitor

Just got my dynadock and cannot get my 2nd monitor for clone my laptop. It only shows my screensaver.

Any suggestions?

Hello

Can you also tell us what phone you use on the Dynadock?

Normally, you can switch between monitors if you press FN + F5. Also, check the display properties. So right click on the desktop and check the display properties. Make sure that the image on the second monitor is cloned and it s not defined to extend the desktop here.

Tags: Toshiba

Similar Questions

  • Z50 does not detect second monitor HDMI

    I recently purchased the Lenovo Z50 - 70 with 16 GB of ram and nvidia 840 m video card.

    Today I tried to connect the laptop to my LG 47LA6208-ZA, but the laptop does not recognize a second monitor. When I try to detect that another monitor nothing find it.

    I don't know there is no problem with the tv or hdmi cable, cause another pc with a cable hdmi even on the same port hdmi works perfectly.

    Any ideas what could be the problem here? I have already updated all the drivers.

    However, I do not know on what card video the hdmi port is on, the nvidia or intel on board.

    Any help would be appreciated!

    It turns out that the hdmi cable is the problem after all! Which is really strange, cause there is no problem with the other pc. However, I am very happy that this is resolved! Thanks for the support!

  • Windows 98 does not recognize second monitor

    Hello

    I am trying to get Windows 98 to recognize an old graphics card so I can use two monitors. I installed an old map of Weitek power 9001 and allegedly installed Windows drivers for it. I plugged the second monitor, and nothing happens. When I go to display properties, it only shows two monitors. Is the graph incompatible card or what?

    You need to download the drivers from the graphics card company Web site directly.  The default Windows drivers do not support the two monitors.

  • Windows does not recognize second monitor, lists as generic pnp monitor

    I have a Setup dual monitor. When I bought the monitor in that I plugged it, windows 7 recognized immediately there were no problem driver. After about two weeks all sudden Windows Add as the right brand and model but just as a generic pnp monitor. I rebooted and the problem was solved. Then it started happening more and more and now I have nothing will fix the problem. I installed the drivers for the monitor, ATI drivers reinstalled and nothing else in between I can find. It wouldn't be a problem except that when it it lists as is the generic monitor does not have the correct resolution and I'm stuck with a second monitor that is horrible with a lower resolution. Any help or ideas would be useful.

    Specifications of the computer:

    Windows 7 Ultimate 64 bit

    Motherboard Asus Maximus II

    Intel Core2 Quad Q9550

    4 GB of Ram

    ATI Radeon HD 4870

    First monitor: Acer AL2216W

    Second monitor: Optiquest Q2162wb

    Hi k.Winger,

    What happened when you tried to remove it in Mode safe?

    I suggest to disable your antivirus and security temporarily software and try remove and reinstall driver.

    Chris
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Finder does not show folders

    Hello

    I have a macbook Air 13 "bought in 2011, it has OS X 10.9 Mavericks installed and since yesterday the Finder does not work. When I open it it does not show a folder or a document, and it shows strange reasons (reminds me when my old Windows crashed).

    Here you will find some screenshots.

    Important to note is that if I use a projector I can find the files, then open them. Also when I upload an image on the internet and I have to select from the computer via the Finder (regarding the screenshots attached), it works well. In addition, as you can see from the screenshots, on top of the viewfinder, I can see the files and I can open them somehow. If I change the view of the researcher, song to a list, so I can't see anything and can not open files.

    I tried to restart the computer, turn it off and turn it on all by pressing the SHIFT key, but it does not work. Interestingly, when I force to quit the Finder application and I re-launch, for the first 10 seconds, it works, then it stops working.

    Do you have an idea what could be the problem?

    Alex

    Unfortunately I have a hardware problem with RAM or graphics chip.

    If your MacBook Air has been purchased after July 20, 2011, he probably has a material test integrated.  You can find starting with'd ' key.

    If it isn't you will need the installer original discs/flash drive that comes with it.    If missing, call AppleCare.

    You may also be able to get a disc to test material created with this link:

    https://github.com/upekkha/AppleHardwareTest

    If Apple Hardware Test reveals no problems, it is more likely that the RAM is an issue than any other thing: *

    http://www.macmaps.com/BadRAM.html

    * Links to my pages give me an allowance.

  • my task manager on windows vista family premium does not show the tabs before and used to work properly.

    my task manager on windows vista family premium does not show the tabs it used to, when I used to open the Task Manager it would be things like 'process' 'services' 'preformance' ect. in the tabs. but now when I open it it shows just a window that has two columns, one labeled task, and other labeled status. It shows what im running, but there any options at all as the winger treat ect. the window is not even an exit or minimize the icon as other windows are in the upper right. the only way to close it alt f4 do - what I do? Ive already tried to restart the computer, and I'm on the only account to administer it. I have a screenshot of the new manager of task here: http://i1119.photobucket.com/albums/k621/a_bakedpotato/vistataskmanagerisue.jpg

    Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

    Microsoft has suggestions and offerings to

    http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

    Moderator Forum Keith has a few suggestions along this line to

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

    If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

    You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type sfc in the search box, right-click to SFC. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

    Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

    `

    I hope this helps. Good luck.

  • BlackBerry Smartphones Blackberry 8520 wiped and does not show error 507

    Hi, I recently wiped my blackberry 8520 OS with BBSAK and started to install another OS, in the process, the USB cable somehow has been disconnected and installation has failed. Now the phone just to start, turn on for about 3 seconds shows nothing and then turns off. It does not show same error 507. Help, please

    Hello and welcome to the community!

    You may need to use these tips:

    Good luck and let us know!

  • Since the upgrade to Wiondows 7 over the weekend, MSN does not show my piocture contact or Favorites

    After the upgrade to Windows 7 this weekend past, MSN Premium does not show my Contact picture or favorite unless I select "Run as Administrator" when I start it.  When I start it with "Run as Administrator", my picture of contacts in Windows Live Messenger, my favorites appear and the photo of the Contact displayed in the Panel to the screen.  Unfortunately, MSN work very slowly in administrator mode, mail is hot flushes extremely slow and Live Messenger every few seconds.

    This looks like to me a permissions problem.  Windows Live Mail has crashed with false file corruption errors until I used event ID Viewer files I needed to have the permissions.  Finally got my Windows Live Issuies known resolved.  This problem is the only thing preventing the upgrade to Windows 7 to be a success.  No one knows what files I need to add my username to access it?

    Hello

    If the question is limited with MSN, I suggest contac MSN support for assistance.

    https://support.MSN.com/contactus.aspx?WA=wsignin1.0&scrx=1

    If the problem persists with Hotmail, I suggest you write the topic in the forum link mentioned below and check.

    http://answers.Microsoft.com/en-us/windowslive/Forum/LIVEmail-wlsettings?tab=all

    Hope this information helps.

  • Last edited DataGrid field does not show value

    I use an editable datagrid when the user types in their data. When they click on it does not show the last value they came outside the grid of data. The value is there, and if you click on this field once again it will appear. If you click outside the field for the second time, this time, the value remains displayed. How can I get the value is displayed the first time the datagrid control loses focus?

    I tried

    dataInput.addEventListener (FocusEvent.FOCUS_OUT, updateCell);

    function updateCell(e:FocusEvent):void {}
    dataInput.drawNow ();
    }

    This is not the default behavior.  you do something to cause this problem.

    If you don't see everything you do that could cause this problem, create a new fla with a datagrid control, fill and make it editable.  There should be no code at the level of the grid of data other than the assignment of content.  do you see a problem?

  • Calculation does not show in pdf format

    Hello!  I hope someone can help me.  I made a grid which should show each sale lines total and in the second line, it does not show the total when you test the form in the pdf preview.  All calculations and all look the same as the other lines that show the total.  Anyone has any ideas on what would make a line shows that a total when all others do?  I have the attached form.

    I don't know why it is happenin but if you change the binding on the total to normal field, it works fine.

    Paul

  • Windows 10. installed iTunes version 12.4.0.119. I have several iTunes libraries. On most of them display-> ' display as ' does not show the grid option. A library of fact.  It's all music, with no video media. By default seems to be a list that is unc

    Windows 10. installed iTunes version 12.4.0.119. I have several iTunes libraries. On most of them display-> ' display as ' does not show the grid option. A library of fact.  It's all music, with no video media. By default seems to be a list that is unchangeable.

    Select the sidebar if hidden. View options > view as may depend on which of the options for the song, artist, album, etc. are selected in the sidebar.

    TT2

  • iTunes movie does not show on the ipad after download

    When I rent a movie via itunes on my ipad air 2 it runs it through the treatment of download, but the film does not show in one of my shopping list

    To download in the video the iPad app play you (which is where you looked too?) -It will appear in the purchased for redownloading, rentals are a unique download only

  • Why apple card app does not show the routes and directions between two places in India in an iphone 6 s more?

    map does not show the routes and directions

    This feature is not yet supported in India.

    http://www.Apple.com/in/iOS/feature-availability/#maps-directions

    In addition, your phone may be overheating for a number of reasons. The most common of which is low service area.

    Your attributes from battery to the majority of the production of heat, then adjust settings to put less load on the farm in general will help some.

    http://www.Apple.com/batteries/maximizing-performance/#iOS

  • Checking update Java plug-in does not show latest version after update same

    Checking update Java plug-in does not show latest version after update same

    You exit and then restart your browser after Java update in order for the right version of Java to display the Plugin Check page. I felt it necessary to do so.

    See also:

    Other - you should check your Plugins and update as needed.

  • How to lock my browser so it does not show my passwords.

    I'm going to work on my computer and take it to a local store. I would like to please how to close my browser so it does not show my passwords for my accounts? (there is no real safe biggies) I'd rather just they didn't have the ability to snoop. Also, if my operating system is upgraded it deletes my browser history / passwords saved in Firefox? (I'm not concerned about the other browsers) Thanks in advance

    You can protect firefox password store by setting a master password.

    If your data are always there after an upgrade of the OS depends on how they do it - to be sure, you can save your profile on a usb key or elsewhere before you replace your pc - see back up and restore the information contained in the profiles of Firefox

Maybe you are looking for

  • Firefox is having "Script" questions (no response) und eventually Flash issues?

    Okay, downloaded Firefox for the first time like a year yesterday. It worked perfectly, oh, how I missed it. I hate using Google Chrome with a fiery burning passion. However, although it worked perfectly yesterday, I have not downloaded anything or h

  • X 360 HP spectrum: spectrum HP recovery USB

    I need HP support to help me wth this.  I ordered the Recovery Windows 10 USB for my HP 21/07/16 Ghost and received a confirmation email, stating I receive the product by 07/29/16, which as of today, 01/08/16, I have not received by mail.  Please res

  • Communication problems scanner Canon MP610 with laptop

    I have a Canon MP610 all in one printer, connected to a Dell laptop connected via a netgear wireless router and a Dell PC. The MP610 runs perfectly with the PC, and I am able to print from the laptop, but when I try to scan from the laptop using the

  • Bluetooth does not work on Lenovo T60 laptop

    Left my laptop detect my bluetooth, here the problem devices. A few days ago, I chose what programs will take place at the start, I DISABLED the blue tooth launch, thinking about my PC would auto detect devices when I want to connect.  Now the icon i

  • The installer crashes to check the network environment

    Could not print today. Deleted HP programs. Started more. Installation software downloaded from the HP website. All systems OK except when it comes to audit network environment of the installer crashes. My son and I are stumped. OfficejetPro8600, N91